summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-13ath9k: Fix potential use-after-free.Ben Greear
The ath_debug_stat_tx references bf->bf_mpdu, which is the skb consumed by ath_tx_complete. So, call the ath_debug_stat_tx method first. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: fix SMPS requestJohannes Berg
It looks like I submitted a different patch than I tested, because clearly the code in mac80211 is missing actually propagating the requested SMPS mode. Fix that! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13ath9k: Set RX filter for Probe Request based on filter flagJouni Malinen
This allows mac80211 to enable receiving of Probe Request frames in station mode which is needed for P2P. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: add probe request filter flagJohannes Berg
Using the frame registration notification, we can see when probe requests are requested and notify the low-level driver via filtering. The flag is also set in AP and IBSS modes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13cfg80211: notify drivers about frame registrationsJohannes Berg
Drivers may need to adjust their filters according to frame registrations, so notify them about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13ath9k: Fix documentation in rate controlMohammed Shafi Shajakhan
This fix updates the documenation in Rate Control Table structure Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13ath5k: Move debugfs under ieee80211/[wiphy-name]Ben Greear
This automatically keeps things proper when wiphy is renamed. Based on patch by Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13wext: fix alignment problem in serializing 'struct iw_point'Gerrit Renker
wext: fix alignment problem in serializing 'struct iw_point' This fixes a typo in the definition of the serialized length of struct iw_point: a) wireless.h is exported to userspace, the typo causes IW_EV_POINT_PK_LEN to be 12 on 64-bit, and 8 on 32-bit systems (causing misalignment); b) in compat-64 mode iwe_stream_add_point() memcpys overlap (see below). The second case in in compat-64 mode looks like (variable names are as in include/net/iw_handler.h:iwe_stream_add_point()): point_len = IW_EV_COMPAT_POINT_LEN = 8 lcp_len = IW_EV_COMPAT_LCP_LEN = 4 2nd memcpy: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 12 - 4 = 8 IW_EV_LCP_PK_LEN <--------------> *---> 'extra' data area +-------+-------+-------+-------+---------------+------- ...-+ | len | cmd |length | flags | (empty) -> extra ... | +-------+-------+-------+-------+---------------+------- ...-+ 2 2 2 2 4 lcp_len <--------------> <-!! OVERLAP !!> <--1st memcpy--><------- 2nd memcpy -----------> <---- 3rd memcpy ------- ... > <--------- point_len ----------> This case could cause overrun whenever iw_point.length < 4. The other two cases are - * 32-bit systems: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 8 - 4 = 4, the second memcpy copies exactly the 4 required bytes; * 64-bit systems: IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN = 12 - 4 = 8, the second memcpy copies a superfluous (but non overlapping) 4 bytes. The patch changes IW_EV_POINT_PK_LEN to be 8, so that in all 3 cases always only the requested iw_point.{length,flags} (both __u16) are copied, avoiding overrrun (compat-64) and superfluous copy (64-bit). In addition, the userspace header is sanitized (in agreement with version 30 of the wireless tools). Many thanks to Johannes Berg for help and review with this patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13IPVS: ip_vs_dbg_callid() is only needed for debuggingSimon Horman
ip_vs_dbg_callid() and IP_VS_DEBUG_CALLID() are only needed it CONFIG_IP_VS_DEBUG is defined. This resolves the following build warning when CONFIG_IP_VS_DEBUG is not defined. net/netfilter/ipvs/ip_vs_pe_sip.c:11: warning: 'ip_vs_dbg_callid' defined but not used Reported-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-13block: Ensure physical block size is unsigned intMartin K. Petersen
Physical block size was declared unsigned int to accomodate the maximum size reported by READ CAPACITY(16). Make sure we use the right type in the related functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-13x86, olpc: Register XO-1 platform devicesDaniel Drake
The upcoming XO-1 rfkill driver (for drivers/platform/x86) will register itself with the name "xo1-rfkill", and the already-merged XO-1 poweroff code uses name "olpc-xo1" Add the necessary mechanics so that these devices are properly initialized on XO-1 laptops. Signed-off-by: Daniel Drake <dsd@laptop.org> LKML-Reference: <20101013181042.90C8F9D401B@zog.reactivated.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-13net: allow FEC driver to use fixed PHY supportGreg Ungerer
At least one board using the FEC driver does not have a conventional PHY attached to it, it is directly connected to a somewhat simple ethernet switch (the board is the SnapGear/LITE, and the attached 4-port ethernet switch is a RealTek RTL8305). This switch does not present the usual register interface of a PHY, it presents nothing. So a PHY scan will find nothing - it finds ID's of 0 for each PHY on the attached MII bus. After the FEC driver was changed to use phylib for supporting PHYs it no longer works on this particular board/switch setup. Add code support to use a fixed phy if no PHY is found on the MII bus. This is based on the way the cpmac.c driver solved this same problem. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13s390: ctcm_mpc: Fix build after netdev refcount changes.David S. Miller
Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13netfilter: xtables: remove unused definesJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: unify {ip,ip6,arp}t_error_targetJan Engelhardt
Unification of struct *_error_target was forgotten in v2.6.16-1689-g1e30a01. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: resolve indirect macros 3/3Jan Engelhardt
2010-10-13netfilter: xtables: resolve indirect macros 2/3Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13netfilter: xtables: resolve indirect macros 1/3Jan Engelhardt
Many of the used macros are just there for userspace compatibility. Substitute the in-kernel code to directly use the terminal macro and stuff the defines into #ifndef __KERNEL__ sections. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-10-13tracing: Fix function-graph build warning on 32-bitBorislav Petkov
Fix kernel/trace/trace_functions_graph.c: In function ‘trace_print_graph_duration’: kernel/trace/trace_functions_graph.c:652: warning: comparison of distinct pointer types lacks a cast when building 36-rc6 on a 32-bit due to the strict type check failing in the min() macro. Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: Chase Douglas <chase.douglas@canonical.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100929080823.GA13595@liondog.tnic> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-13Merge branch 'amd-iommu/2.6.37' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu
2010-10-13powerpc/44x: Add support for the AMCC APM821xx SoCTirumala Marri
This patch adds CPU, device tree, defconfig and bluestone board support for APM821xx SoC. Signed-off-by: Tirumala R Marri <tmarri@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-10-13x86/amd-iommu: Update copyright headersJoerg Roedel
This patch updates the copyright headers in all source files of the AMD IOMMU driver. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-10-13x86/amd-iommu: Reenable AMD IOMMU if it's mysteriously vanished over suspendMatthew Garrett
AMD's reference BIOS code had a bug that could result in the firmware failing to reenable the iommu on resume. It transpires that this causes certain less than desirable behaviour when it comes to PCI accesses, to whit them ending up somewhere near Bristol when the more desirable outcome was Edinburgh. Sadness ensues, perhaps along with filesystem corruption. Let's make sure that it gets turned back on, and that we restore its configuration so decisions it makes bear some resemblance to those made by reasonable people rather than crack-addled lemurs who spent all your DMA on Thunderbird. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-10-13HID: Add Cando touch screen 15.6-inch product idFrançois Jaouen
This add the product id of the touch screen found on ACER Aspire 5738PZ. Works with hid-cando driver. Signed-off-by: Francois Jaouen<francois.jaouen@laposte.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-13powerpc/Makefiles: Change to new flag variablesmatt mooney
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/spufs: Use llseek in all file operationsArnd Bergmann
The default for llseek is changing, so we need explicit operations everywhere. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pseries/xics: Use cpu_possible_mask rather than cpu_all_maskNishanth Aravamudan
Current firmware only allows us to send IRQs to the first processor or all processors. We currently check to see if the passed in mask is equal to the all_mask, but the firmware is only considering whether the request is for the equivalent of the possible_mask. Thus, we think the request is for some subset of CPUs and only assign IRQs to the first CPU (on systems without irqbalance running) as evidenced by /proc/interrupts. By using possible_mask instead, we account for this and proper interleaving of interrupts occurs. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pci: Cleanup device dma setup codeNishanth Aravamudan
Use set_dma_ops and remove unused oddly-named temp pointer sd. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pseries: Use kmemdupNishanth Aravamudan
While looking at some code paths I came across this code that zeros memory then copies over the entire length. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/viobus: Free TCE table on device releaseNishanth Aravamudan
Release the TCE table as the XXX suggests, except on FW_FEATURE_ISERIES, where the tables are allocated globally and reused. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/vio: Use put_device() on device_register failureNishanth Aravamudan
The kernel doc for device_register (and device_initialize) very clearly state to call put_device not kfree after calling, even on error. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/dma: Fix check for direct DMA supportNishanth Aravamudan
The current check is wrong because it does not take the DMA offset intot account, and in the case of a driver which doesn't actually support 64bits would falsely report that device as working. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/dma: Fix dma_iommu_dma_supported compareNishanth Aravamudan
The table offset is in entries, each of which imply a dma address of an IOMMU page. Also, we should check the device can reach the whole IOMMU table. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pci: Fix return type of BUID_{HI,LO} macrosNishanth Aravamudan
BUID_HI and BUID_LO are used to pass data to call_rtas, which expects ints or u32s. But the macro doesn't cast the return, so the result is still u64. Use the upper_32_bits and lower_32_bits macros that have been added to kernel.h. Found by getting printf format errors trying to debug print the args, no actual code change for 64 bit kernels where the macros are actually used. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13i2c/i2c-pasemi.c: Fix unsigned return typeJulia Lawall
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/irq.c: Add of_node_put to avoid memory leakJulia Lawall
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc: Remove pr_<level> uses of KERN_<level>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc: Use static const char arraysJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pseries: Partition migration in the kernelNathan Fontenot
Enable partition migration in the kernel. To do this a new sysfs file, /sys/kernel/mobility/migration, is created. In order to initiate a migration the stream id (generated by the HMC managing the system) is written to this file. After a migration occurs, and what is the majority of this code, the device tree needs to be updated for the new system the partition is running on. This is done via the ibm,update-nodes and ibm,update-properties rtas calls which return information regarding which nodes and properties of the device tree are to be added/removed/updated. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pseries: Export rtas_ibm_suspend_me()Nathan Fontenot
Export the rtas_ibm_suspend_me() routine. This is needed to perform partition migration in the kernel. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13powerpc/pseries: Export device tree updating routinesNathan Fontenot
Export routines associated with adding and removing device tree nodes on pseries needed for device tree updating. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13Merge remote branch 'kumar/merge' into nextBenjamin Herrenschmidt
2010-10-12powerpc/of: add eSPI controller dts bindings and DTS modificationMingkai Hu
Also modifiy the document of cell-index in SPI controller. Add the SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12spi/fsl_spi: add eSPI controller supportMingkai Hu
Add eSPI controller support based on the library code spi_fsl_lib.c. The eSPI controller is newer controller 85xx/Pxxx devices supported. There're some differences comparing to the SPI controller: 1. Has different register map and different bit definition So leave the code operated the register to the driver code, not the common code. 2. Support 4 dedicated chip selects The software can't controll the chip selects directly, The SPCOM[CS] field is used to select which chip selects is used, and the SPCOM[TRANLEN] field is set to tell the controller how long the CS signal need to be asserted. So the driver doesn't need the chipselect related function when transfering data, just set corresponding register fields to controll the chipseclect. 3. Different Transmit/Receive FIFO access register behavior For SPI controller, the Tx/Rx FIFO access register can hold only one character regardless of the character length, but for eSPI controller, the register can hold 4 or 2 characters according to the character lengths. Access the Tx/Rx FIFO access register of the eSPI controller will shift out/in 4/2 characters one time. For SPI subsystem, the command and data are put into different transfers, so we need to combine all the transfers to one transfer in order to pass the transfer to eSPI controller. 4. The max transaction length limitation The max transaction length one time is limitted by the SPCOM[TRANSLEN] field which is 0xFFFF. When used mkfs.ext2 command to create ext2 filesystem on the flash, the read length will exceed the max value of the SPCOM[TRANSLEN] field. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12spi/mpc8xxx: refactor the common code for SPI/eSPI controllerMingkai Hu
Refactor the common code in file spi_fsl_spi.c to spi_fsl_lib.c used by SPI/eSPI controller driver as a library, and leave the QE/CPM SPI controller code in the SPI controller driver spi_fsl_spi.c. Because the register map of the SPI controller and eSPI controller is so different, also leave the code operated the register to the driver code, not the common code. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12spi/mpc8xxx: rename spi_mpc8xxx.c to spi_fsl_spi.cMingkai Hu
This will pave the way to refactor out the common code which can be used by the eSPI controller driver, and rename the SPI controller dirver to the file spi_fsl_spi.c. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12Merge commit 'v2.6.36-rc7' into spi/nextGrant Likely
2010-10-12spi/pl022: fix dubious allocation staticize platform dataLinus Walleij
This removes some dubious allocation of a local chipinfo struct in favor of a constant preset, tagging that one const revealed further problems with platform data being modified so fixed up these too. Reported-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12spi/pl022: get rid of chipinfo dev pointerLinus Walleij
What is the dev pointer doing inside the platform data anyway. We have another pointer to the actual device at hand, use that. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12spi/pl022: Add spi->mode support to AMBA SPI driverKevin Wells
This patch adds spi->mode support for the AMBA pl022 driver and allows spidev to correctly alter SPI modes. Unused fields used in the pl022 header file for the pl022_config_chip have been removed. The ab8500 client driver selects the data transfer size instead of the platform data. For platforms that use the amba pl022 driver, the unused fields in the controller data structure have been removed and the .mode field in the SPI board info structure is used instead. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit (git 2.34.1) at 2025-09-23 02:57:17 +0000