| Age | Commit message (Collapse) | Author |
|---|
|
Adding 6th module parameter in 'mtd=xxx' to control whether or not
reserving PEBs for filling pool/wl_pool.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The anchor PEB must be picked from first 64 PEBs, these PEBs could have
large erase counter greater than other PEBs especially when free space
is nearly running out.
The ubi_update_fastmap will be called as long as pool/wl_pool is empty,
old anchor PEB is erased when updating fastmap. Given an UBI device with
N PEBs, free PEBs is nearly running out and pool will be filled with 1
PEB every time ubi_update_fastmap invoked. So t=N/POOL_SIZE[1]/64 means
that in worst case the erase counter of first 64 PEBs is t times greater
than other PEBs in theory.
After running fsstress for 24h, the erase counter statistics for two UBI
devices shown as follow(CONFIG_MTD_UBI_WL_THRESHOLD=128):
Device A(1024 PEBs, pool=50, wl_pool=25):
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 0 0 0 0
100 .. 999: 0 0 0 0
1000 .. 9999: 0 0 0 0
10000 .. 99999: 960 29224 29282 29362
100000 .. inf: 64 117897 117934 117940
---------------------------------------------------------
Total : 1024 29224 34822 117940
Device B(8192 PEBs, pool=256, wl_pool=128):
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 0 0 0 0
100 .. 999: 0 0 0 0
1000 .. 9999: 8128 2253 2321 2387
10000 .. 99999: 64 35387 35387 35388
100000 .. inf: 0 0 0 0
---------------------------------------------------------
Total : 8192 2253 2579 35388
The key point is reducing fastmap updating frequency by enlarging
POOL_SIZE, so let UBI reserve ubi->fm_pool.max_size PEBs during
attaching. Then POOL_SIZE will become ubi->fm_pool.max_size/2 even
in free space running out case.
Given an UBI device with 8192 PEBs(16384\8192\4096 is common
large-capacity flash), t=8192/128/64=1. The fastmap updating will
happen in either wl_pool or pool is empty, so setting fm_pool_rsv_cnt
as ubi->fm_pool.max_size can fill wl_pool in full state.
After pool reservation, running fsstress for 24h:
Device A(1024 PEBs, pool=50, wl_pool=25):
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 0 0 0 0
100 .. 999: 0 0 0 0
1000 .. 9999: 0 0 0 0
10000 .. 99999: 1024 33801 33997 34056
100000 .. inf: 0 0 0 0
---------------------------------------------------------
Total : 1024 33801 33997 34056
Device B(8192 PEBs, pool=256, wl_pool=128):
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 0 0 0 0
100 .. 999: 0 0 0 0
1000 .. 9999: 8192 2205 2397 2460
10000 .. 99999: 0 0 0 0
100000 .. inf: 0 0 0 0
---------------------------------------------------------
Total : 8192 2205 2397 2460
The difference of erase counter between first 64 PEBs and others is
under WL_FREE_MAX_DIFF(2*UBI_WL_THRESHOLD=2*128=256).
Device A: 34056 - 33801 = 255
Device B: 2460 - 2205 = 255
Next patch will add a switch to control whether UBI needs to reserve
PEBs for filling pool.
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217787
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This is the part 2 to fix cyclically reusing single fastmap data PEBs.
Consider one situation, if there are four free PEBs for fm_anchor, pool,
wl_pool and fastmap data PEB with erase counter 100, 100, 100, 5096
(ubi->beb_rsvd_pebs is 0). PEB with erase counter 5096 is always picked
for fastmap data according to the realization of find_wl_entry(), since
fastmap data PEB is not scheduled for wl, finally there are two PEBs
(fm data) with great erase counter than other PEBS.
Get wl PEB even its erase counter exceeds the 'max' in find_wl_entry()
when free PEBs are run out after filling pools and fm data. Then the PEB
with biggest erase conter is taken as wl PEB, it can be scheduled for wl.
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217787
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Solve two ergonomic issues with struct seq_buf;
1) Too much boilerplate is required to initialize:
struct seq_buf s;
char buf[32];
seq_buf_init(s, buf, sizeof(buf));
Instead, we can build this directly on the stack. Provide
DECLARE_SEQ_BUF() macro to do this:
DECLARE_SEQ_BUF(s, 32);
2) %NUL termination is fragile and requires 2 steps to get a valid
C String (and is a layering violation exposing the "internals" of
seq_buf):
seq_buf_terminate(s);
do_something(s->buffer);
Instead, we can just return s->buffer directly after terminating it in
the refactored seq_buf_terminate(), now known as seq_buf_str():
do_something(seq_buf_str(s));
Link: https://lore.kernel.org/linux-trace-kernel/20231027155634.make.260-kees@kernel.org
Link: https://lore.kernel.org/linux-trace-kernel/20231026194033.it.702-kees@kernel.org/
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This is the part 1 to fix cyclically reusing single fastmap data PEBs.
After running fsstress on UBIFS for a while, UBI (16384 blocks, fastmap
takes 2 blocks) has an erase block(PEB: 8031) with big erase counter
greater than any other pebs:
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 532 84 92 99
100 .. 999: 15787 100 147 229
1000 .. 9999: 64 4699 4765 4826
10000 .. 99999: 0 0 0 0
100000 .. inf: 1 272935 272935 272935
---------------------------------------------------------
Total : 16384 84 180 272935
Not like fm_anchor, there is no candidate PEBs for fastmap data area,
so old fastmap data pebs will be reused after all free pebs are filled
into pool/wl_pool:
ubi_update_fastmap
for (i = 1; i < new_fm->used_blocks; i++)
erase_block(ubi, old_fm->e[i]->pnum)
new_fm->e[i] = old_fm->e[i]
According to wear leveling algorithm, UBI selects one small erase
counter PEB from ubi->used and one big erase counter PEB from wl_pool,
the reused fastmap data PEB is not in these trees. UBI won't schedule
this PEB for wl even it is in ubi->used because wl algorithm expects
small erase counter for used PEB.
Don't reserve PEB for fastmap in may_reserve_for_fm() if fm_anchor
already exists. Otherwise, when UBI is running out of free PEBs,
the only one free PEB (pnum < 64) will be skipped and fastmap data
will be written on the same old PEB.
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217787
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Change pool filling stop condition. Commit d09e9a2bddba ("ubi:
fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool
not empty") reserves fastmap data PEBs after filling 1 PEB in
wl_pool. Now wait_free_pebs_for_pool() makes enough free PEBs
before filling pool, there will still be at least 1 PEB in pool
and 1 PEB in wl_pool after doing ubi_refill_pools().
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Wait until there are enough free PEBs before filling pool/wl_pool,
sometimes erase_worker is not scheduled in time, which causes two
situations:
A. There are few PEBs filled in pool, which makes ubi_update_fastmap
is frequently called and leads first 64 PEBs are erased more times
than other PEBs. So waiting free PEBs before filling pool reduces
fastmap updating frequency and prolongs flash service life.
B. In situation that space is nearly running out, ubi_refill_pools()
cannot make sure pool and wl_pool are filled with free PEBs, caused
by the delay of erase_worker. After this patch applied, there must
exist free PEBs in pool after one call of ubi_update_fastmap.
Besides, this patch is a preparetion for fixing large erase counter in
fastmap data block and fixing lapsed wear leveling for first 64 PEBs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217787
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
If new bad PEBs occur, UBI firstly consumes ubi->beb_rsvd_pebs, and then
ubi->avail_pebs, finally UBI becomes read-only if above two items are 0,
which means that the amount of PEBs for user volumes is not effected.
Besides, UBI reserves count of free PBEs is ubi->beb_rsvd_pebs while
filling wl pool or getting free PEBs, but ubi->avail_pebs is not reserved.
So ubi->beb_rsvd_pebs and ubi->avail_pebs have nothing to do with the
usage of free PEBs, UBI can use all free PEBs.
Commit 78d6d497a648 ("UBI: Move fastmap specific functions out of wl.c")
has removed beb_rsvd_pebs checking while filling pool. Now, don't reserve
ubi->beb_rsvd_pebs while filling wl_pool. This will fill more PEBs in pool
and also reduce fastmap updating frequency.
Also remove beb_rsvd_pebs checking in ubi_wl_get_fm_peb.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217787
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Since erase_block() has same logic with sync_erase(), just replace it
with sync_erase(), also rename 'sync_erase()' to 'ubi_sync_erase()'.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Function ubi_update_fastmap could be called in IO context, for example:
ubifs_writepage
do_writepage
ubifs_jnl_write_data
write_head
ubifs_wbuf_write_nolock
ubifs_leb_write
ubi_leb_write
ubi_eba_write_leb
try_write_vid_and_data
ubi_wl_get_peb
ubi_update_fastmap
erase_block
So it's better to allocate memory with GFP_NOFS mode, in case waiting
page writeback(dead loop).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Just like sync_erase() does, getting erase counter from wl_entry is
faster than reading from flash.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
After running fsstress on ubifs for a long time, UBI(16384 blocks,
fastmap takes 2 blocks) has an erase block with different erase
counters displayed from two views:
From ubiscan view: PEB 8031 has erase counter 31581
=========================================================
from to count min avg max
---------------------------------------------------------
0 .. 9: 0 0 0 0
10 .. 99: 0 0 0 0
100 .. 999: 16383 290 315 781
1000 .. 9999: 0 0 0 0
10000 .. 99999: 1 31581 31581 31581
100000 .. inf: 0 0 0 0
---------------------------------------------------------
Total : 16384 290 317 31581
From detailed_erase_block_info view: PEB 8031 has erase counter 7
physical_block_number erase_count
8030 421
8031 7 # mem info is different from disk info
8032 434
8033 425
8034 431
Following process missed updating erase counter in wl_entry(in memory):
ubi_update_fastmap
for (i = 1; i < new_fm->used_blocks; i++) // update fastmap data
if (!tmp_e)
if (old_fm && old_fm->e[i])
erase_block(ubi, old_fm->e[i]->pnum)
ret = ubi_io_sync_erase(ubi, pnum, 0)
ec = be64_to_cpu(ec_hdr->ec)
ec += ret
ec_hdr->ec = cpu_to_be64(ec)
ubi_io_write_ec_hdr(ubi, pnum, ec_hdr) // ec is updated on flash
// ec is not updated in old_fm->e[i] (in memory)
Fix it by passing wl_enter into erase_block() and updating erase
counter in erase_block().
Fixes: dbb7d2a88d2a ("UBI: Add fastmap core")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Fix smatch warning:
fs/ubifs/journal.c:1610 ubifs_jnl_truncate() warn: missing error code
'err'
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Ensure that the allocated bud->log_hash (if any) is freed in all cases
when the bud itself is freed, to fix this leak caught by kmemleak:
# keyctl add logon foo:bar data @s
# echo clear > /sys/kernel/debug/kmemleak
# mount -t ubifs /dev/ubi0_0 mnt -o auth_hash_name=sha256,auth_key=foo:bar
# echo a > mnt/x
# umount mnt
# mount -t ubifs /dev/ubi0_0 mnt -o auth_hash_name=sha256,auth_key=foo:bar
# umount mnt
# sleep 5
# echo scan > /sys/kernel/debug/kmemleak
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff... (size 128):
comm "mount"
backtrace:
__kmalloc
__ubifs_hash_get_desc+0x5d/0xe0 ubifs
ubifs_replay_journal
ubifs_mount
...
Fixes: da8ef65f9573 ("ubifs: Authenticate replayed journal")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Add description of @time and @flags in ubifs_update_time().
to silence the warnings:
fs/ubifs/file.c:1383: warning: Function parameter or member 'time' not described in 'ubifs_update_time'
fs/ubifs/file.c:1383: warning: Function parameter or member 'flags' not described in 'ubifs_update_time'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5848
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can
claim it instead (Vicki Pfau)
- Make pci_assign_unassigned_resources() non-init because sparc uses it
after init-time (Randy Dunlap)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe)
- Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig
(Liu Song)
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Simplify pcie_capability_clear_and_set_word() cases that could be
pcie_capability_clear_word() (Ilpo Järvinen)
* pci/misc:
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: Replace unnecessary UTF-8 in Kconfig
logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations
PCI: Make pci_assign_unassigned_resources() non-init
PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
|
|
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo
Järvinen, Bjorn Helgaas)
- Rework DPC control programming for clarity (Ilpo Järvinen)
* pci/field-get:
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
PCI: Use FIELD_GET()
PCI/MSI: Use FIELD_GET/PREP()
PCI/DPC: Use defines with DPC reason fields
PCI/DPC: Use defined fields with DPC_CTL register
PCI/DPC: Use FIELD_GET()
PCI: hotplug: Use FIELD_GET/PREP()
PCI: dwc: Use FIELD_GET/PREP()
PCI: cadence: Use FIELD_GET()
PCI: Use FIELD_GET() to extract Link Width
PCI: mvebu: Use FIELD_PREP() with Link Width
PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
# Conflicts:
# drivers/pci/controller/dwc/pcie-tegra194.c
|
|
- Simplify config accessor error checking (Ilpo Järvinen)
* pci/config-errs:
scsi: ipr: Do PCI error checks on own line
PCI: xgene: Do PCI error check on own line & keep return value
PCI: Do error check on own line to split long "if" conditions
atm: iphase: Do PCI error checks on own line
sh: pci: Do PCI error check on own line
alpha: Streamline convoluted PCI error handling
|
|
- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
and xilinx-xdma (Thippeswamy Havalige)
- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)
* pci/controller/xilinx-xdma:
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
|
|
- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
already does that (Thippeswamy Havalige)
- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
to 256 buses (Thippeswamy Havalige)
* pci/controller/xilinx-ecam:
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
|
|
- Fix space/tab whitespace issue (Xinghui Li)
* pci/controller/vmd:
PCI: vmd: Fix inconsistent indentation in vmd_resume()
|
|
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link
speed instead of hard-coding the link speed in MBps (Manivannan
Sadhasivam)
- Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly
doing the bytes-to-bits conversion (Manivannan Sadhasivam)
* pci/controller/speed:
PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
|
|
- Add generic T_PVPERL macro for the required interval between power being
stable and PERST# being inactive (Yoshihiro Shimoda)
- Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda)
- Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link
width (Yoshihiro Shimoda)
- Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already
does it (Yoshihiro Shimoda)
- Add dwc support for different dbi and dbi2 register offsets, to be used
for R-Car Gen4 controllers (Yoshihiro Shimoda)
- Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't
correctly advertise unrolled mapping via their eDMA CTRL register
(Yoshihiro Shimoda)
- Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers
(Yoshihiro Shimoda)
- Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4
controllers (Yoshihiro Shimoda)
- Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro
Shimoda)
- Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on
R-Car S4-8 (Yoshihiro Shimoda)
* pci/controller/rcar:
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
PCI: rcar-gen4: Add endpoint mode support
PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
PCI: dwc: Expose dw_pcie_write_dbi2() to module
PCI: dwc: Expose dw_pcie_ep_exit() to module
PCI: dwc: Add EDMA_UNROLL capability flag
PCI: dwc: endpoint: Add multiple PFs support for dbi2
PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
PCI: dwc: Add dw_pcie_link_set_max_link_width()
PCI: Add T_PVPERL macro
|
|
- Add qcom-ep callback to write DBI2 registers (Manivannan Sadhasivam)
* pci/controller/qcom-ep:
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
|
|
- Set 64-bit DMA mask for layerscape-ep (Guanhua Gao)
* pci/controller/layerscape:
PCI: layerscape-ep: Set 64-bit DMA mask
|
|
- Annotate struct hv_dr_state with __counted_by to prepare for array access
bounds checking (Kees Cook)
* pci/controller/hyperv:
PCI: hv: Annotate struct hv_dr_state with __counted_by
|
|
- Drop unused struct cdns_plat_pcie.is_rc member (Li Chen)
* pci/controller/cadence:
PCI: cadence: Drop unused member from struct cdns_plat_pcie
|
|
- Add a dwc .host_post_init() callback for configuration after downstream
devices are scanned (Manivannan Sadhasivam)
- Enable ASPM for devices below qcom 1.9.0 host controllers (Manivannan
Sadhasivam)
* pci/controller/aspm:
PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops
PCI: dwc: Add host_post_init() callback
|
|
- Add pci_is_vga() helper, which checks for both PCI_CLASS_DISPLAY_VGA and
PCI_CLASS_NOT_DEFINED_VGA (which catches ancient devices built before
Class Codes were defined) (Sui Jingfeng)
- Use the new pci_is_vga() to identify devices for the VGA arbiter, the
sysfs "boot_vga" attribute, and the virtio and qxl drivers (SUi Jingfeng)
* pci/vga:
drm/qxl: Use pci_is_vga() to identify VGA devices
drm/virtio: Use pci_is_vga() to identify VGA devices
PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga()
PCI/VGA: Select VGA devices earlier
PCI/VGA: Use pci_is_vga() to identify VGA devices
PCI: Add pci_is_vga() helper
|
|
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems
to require longer delay than spec requires (Lukas Wunner)
* pci/reset:
PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
|
|
- Protect driver's D3cold preference from being overwritten by user space
via sysfs (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 to fix
wakeup by USB4-attached devices (Mario Limonciello)
* pci/pm:
x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
PCI/sysfs: Protect driver's D3cold preference from user space
|
|
- Move struct dev_pagemap (a flexible structure) to end of struct
pci_p2pdma_pagemap to avoid overwriting things after dev_pagemap
(Gustavo A. R. Silva)
* pci/p2pdma:
PCI/P2PDMA: Remove redundant goto
PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap
|
|
- Add driver for Ampere Altra Attention Indicators (D Scott Phillips)
* pci/hotplug:
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI: acpiphp: Allow built-in drivers for Attention Indicators
|
|
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY
devices (Sui Jingfeng)
- Fix a vmd check for multi-function devices (Ilpo Järvinen)
- Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen)
- Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko)
- Keep .remove() and .probe() callbacks (previously marked __init) in case
they're used via sysfs (Uwe Kleine-König)
* pci/enumeration:
PCI: keystone: Don't discard .probe() callback
PCI: keystone: Don't discard .remove() callback
PCI: kirin: Don't discard .remove() callback
PCI: exynos: Don't discard .remove() callback
PCI/ACPI: Use acpi_evaluate_dsm_typed()
PCI: Use PCI_HEADER_TYPE_* instead of literals
PCI: Add PCI_HEADER_TYPE_MFD definition
PCI: vmd: Correct PCI Header Type Register's multi-function check
drm/radeon: Use pci_get_base_class() to reduce duplicated code
drm/amdgpu: Use pci_get_base_class() to reduce duplicated code
drm/nouveau: Use pci_get_base_class() to reduce duplicated code
ALSA: hda: Use pci_get_base_class() to reduce duplicated code
PCI: Add pci_get_base_class() helper
|
|
- Use IS_ERR_OR_NULL() helper function instead of open-coding it (Ruan
Jinjie)
* pci/endpoint:
PCI: endpoint: Use IS_ERR_OR_NULL() helper function
|
|
- Disable ATS for Intel IPU E2000 A- and B-stepping devices to avoid
invalidation message endianness erratum (Bartosz Pawlowski)
* pci/ats:
PCI: Disable ATS for specific Intel IPU E2000 devices
PCI: Extract ATS disabling to a helper function
|
|
* pci/aspm:
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"
PCI/ASPM: Convert printk() to pr_*() and add include
PCI/ASPM: Remove unnecessary includes
PCI/ASPM: Use FIELD_MAX() instead of literals
PCI/ASPM: Use time constants
PCI/ASPM: Return U32_MAX instead of bit magic construct
PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields
PCI: Add PCI_L1SS_CTL2 fields
|
|
- Factor out AER interrupt enable/disable (Kai-Heng Feng)
* pci/aer:
PCI/AER: Factor out interrupt toggling into helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a potential NULL dereference bug"
* tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix potential NULL deref
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
|
|
Add dt-bindings for ltc2991 octal i2c voltage, current and temperature
monitor.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026103413.27800-1-antoniu.miclaus@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MAX31785 has shown erratic behaviour across multiple system
designs, unexpectedly clock stretching and NAKing transactions.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20231027044346.2167548-1-lakshmiy@us.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The INA237 "85-V, 16-Bit, Precision Power Monitor With I2C Interface" is
basically the same as INA328. Therefore add a corresponding compatible
to the driver.
According to the datasheet the main difference is the current and power
monitoring accuracy:
+------------------------+---------------+---------------+
| | INA238 | INA237 |
+------------------------+---------------+---------------+
| Offset voltage | +/- 5µV | +/- 50µV |
| Offset drift | +/- 0.02µV/°C | +/- 0.02µV/°C |
| Gain error | +/- 0.1% | +/- 0.3% |
| Gain error drift | +/- 25ppm/°C | +/- 50ppm/°C |
| Common mode rejection | 140dB | 120dB |
| Power accuracy | 0.7% | 1.6% |
+------------------------+---------------+---------------+
As well as the missing DEVICE_ID register at 0x3F, which is currently
not in use by the driver.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://lore.kernel.org/r/20231026-ina237-v2-1-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add ti,ina237 binding to ti,ina2xx as they are very similar and may
share the same properties.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231026-ina237-v2-2-dec44811a3c9@linux.dev
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Only the temp sensors that I can verify are present.
T_Sensor is the temperature reading of a 10kΩ β=3435K NTC thermistor
optionally connected to the T_SENSOR header.
The other sensors are as found on the X670E Hero.
Signed-off-by: Ellie Hermaszewska <kernel@monoid.al>
Link: https://lore.kernel.org/r/20231026104332.906357-1-kernel@monoid.al
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
