| Age | Commit message (Collapse) | Author |
|---|
|
Our hardware (UV aka Superdome Flex) has address ranges marked
reserved by the BIOS. Access to these ranges is caught as an error,
causing the BIOS to halt the system.
Initial page tables mapped a large range of physical addresses that
were not checked against the list of BIOS reserved addresses, and
sometimes included reserved addresses in part of the mapped range.
Including the reserved range in the map allowed processor speculative
accesses to the reserved range, triggering a BIOS halt.
Used early in booting, the page table level2_kernel_pgt addresses 1
GiB divided into 2 MiB pages, and it was set up to linearly map a full
1 GiB of physical addresses that included the physical address range
of the kernel image, as chosen by KASLR. But this also included a
large range of unused addresses on either side of the kernel image.
And unlike the kernel image's physical address range, this extra
mapped space was not checked against the BIOS tables of usable RAM
addresses. So there were times when the addresses chosen by KASLR
would result in processor accessible mappings of BIOS reserved
physical addresses.
The kernel code did not directly access any of this extra mapped
space, but having it mapped allowed the processor to issue speculative
accesses into reserved memory, causing system halts.
This was encountered somewhat rarely on a normal system boot, and much
more often when starting the crash kernel if "crashkernel=512M,high"
was specified on the command line (this heavily restricts the physical
address of the crash kernel, in our case usually within 1 GiB of
reserved space).
The solution is to invalidate the pages of this table outside the kernel
image's space before the page table is activated. It fixes this problem
on our hardware.
[ bp: Touchups. ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: dimitri.sivanich@hpe.com
Cc: Feng Tang <feng.tang@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jordan Borgner <mail@jordan-borgner.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Link: https://lkml.kernel.org/r/9c011ee51b081534a7a15065b1681d200298b530.1569358539.git.steve.wahl@hpe.com
|
|
We export the entire kernel address space (i.e. the whole of the TTBR1
address range) via /proc/kcore. The kc_vaddr_to_offset() and
kc_offset_to_vaddr() macros are intended to convert between a kernel
virtual address and its offset relative to the start of the TTBR1
address space.
Prior to commit:
14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
... the offset was calculated relative to VA_START, which at the time
was the start of the TTBR1 address space. At this time, PAGE_OFFSET
pointed to the high half of the TTBR1 address space where arm64's
linear map lived.
That commit swapped the position of VA_START and PAGE_OFFSET, but
failed to update kc_vaddr_to_offset() or kc_offset_to_vaddr(), so
since then the two macros behave incorrectly.
Note that VA_START was subsequently renamed to PAGE_END in commit:
77ad4ce69321abbe ("arm64: memory: rename VA_START to PAGE_END")
As the generic implementations of the two macros calculate the offset
relative to PAGE_OFFSET (which is now the start of the TTBR1 address
space), we can delete the arm64 implementation and use those.
Fixes: 14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Describe the fallthrough pseudo-keyword.
Convert the coding-style.rst example to the keyword style.
Add description and links to deprecated.rst.
Miguel Ojeda comments on the eventual [[fallthrough]] syntax:
"Note that C17/C18 does not have [[fallthrough]].
C++17 introduced it, as it is mentioned above. I would keep the
__attribute__((fallthrough)) -> [[fallthrough]] change you did,
though, since that is indeed the standard syntax (given the paragraph
references C++17).
I was told by Aaron Ballman (who is proposing them for C) that it is
more or less likely that it becomes standardized in C2x. However, it
is still not added to the draft (other attributes are already,
though). See N2268 and N2269:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2268.pdf (fallthrough)
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2269.pdf (attributes in general)"
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reserve the pseudo keyword 'fallthrough' for the ability to convert the
various case block /* fallthrough */ style comments to appear to be an
actual reserved word with the same gcc case block missing fallthrough
warning capability.
All switch/case blocks now should end in one of:
break;
fallthrough;
goto <label>;
return [expression];
continue;
In C mode, GCC supports the __fallthrough__ attribute since 7.1,
the same time the warning and the comment parsing were introduced.
fallthrough devolves to an empty "do {} while (0)" if the compiler
version (any version less than gcc 7) does not support the attribute.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fallthrough will become a pseudo reserved keyword so this only use of
fallthrough is better renamed to allow it.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
Pull drm fixes from Dave Airlie:
"The regular fixes pull for rc3. The i915 team found some fixes they
(or I) missed for rc1, which is why this is a bit bigger than usual,
otherwise there is a single amdgpu fix, some spi panel aliases, and a
bridge fix.
i915:
- execlist access fixes
- list deletion fix
- CML display fix
- HSW workaround extension to GT2
- chicken bit whitelist
- GGTT resume issue
- SKL GPU hangs for Vulkan compute
amdgpu:
- memory leak fix
panel:
- spi aliases
tc358767:
- bridge artifacts fix"
* tag 'drm-fixes-2019-10-11' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/bridge: tc358767: fix max_tu_symbol value
drm/i915/gt: execlists->active is serialised by the tasklet
drm/i915/execlists: Protect peeking at execlists->active
drm/i915: Fixup preempt-to-busy vs reset of a virtual request
drm/i915: Only enqueue already completed requests
drm/i915/execlists: Drop redundant list_del_init(&rq->sched.link)
drm/i915/cml: Add second PCH ID for CMP
drm/amdgpu: fix memory leak
drm/panel: tpo-td043mtea1: Fix SPI alias
drm/panel: tpo-td028ttec1: Fix SPI alias
drm/panel: sony-acx565akm: Fix SPI alias
drm/panel: nec-nl8048hl11: Fix SPI alias
drm/panel: lg-lb035q02: Fix SPI alias
drm/i915: Mark contents as dirty on a write fault
drm/i915: Prevent bonded requests from overtaking each other on preemption
drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled
drm/i915: Verify the engine after acquiring the active.lock
drm/i915: Extend Haswell GT1 PSMI workaround to all
drm/i915: Don't mix srcu tag and negative error codes
drm/i915: Whitelist COMMON_SLICE_CHICKEN2
...
|
|
Pull block fixes from Jens Axboe:
- Fix wbt performance regression introduced with the blk-rq-qos
refactoring (Harshad)
- Fix io_uring fileset removal inadvertently killing the workqueue (me)
- Fix io_uring typo in linked command nonblock submission (Pavel)
- Remove spurious io_uring wakeups on request free (Pavel)
- Fix null_blk zoned command error return (Keith)
- Don't use freezable workqueues for backing_dev, also means we can
revert a previous libata hack (Mika)
- Fix nbd sysfs mutex dropped too soon at removal time (Xiubo)
* tag 'for-linus-20191010' of git://git.kernel.dk/linux-block:
nbd: fix possible sysfs duplicate warning
null_blk: Fix zoned command return code
io_uring: only flush workqueues on fileset removal
io_uring: remove wait loop spurious wakeups
blk-wbt: fix performance regression in wbt scale_up/scale_down
Revert "libata, freezer: avoid block device removal while system is frozen"
bdi: Do not use freezable workqueue
io_uring: fix reversed nonblock flag for link submission
|
|
arm/fixes
mvebu fixes for 5.4 (part 1)
Fix regression on USB for Turris Mox (Armada 3720 based board)
* tag 'mvebu-fixes-5.4-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: armada-3720-turris-mox: convert usb-phy to phy-supply
Link: https://lore.kernel.org/r/87blunsm43.fsf@FE-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
fix test module build.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Depending on inlining decisions by the compiler, __get/put_user_fn
might become out of line. Then the compiler is no longer able to tell
that size can only be 1,2,4 or 8 due to the check in __get/put_user
resulting in false positives like
./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’:
./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
113 | return rc;
| ^~
./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’:
./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
143 | return rc;
| ^~
These functions are supposed to be always inlined. Mark it as such.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
OCB (Outside the Context of a BSS) interfaces are the
implementation of 802.11p, support that.
Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com>
Link: https://lore.kernel.org/r/20191010181307.11821-2-ramonreisfontes@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These new 5GHz channels and 5/10 MHz support should be
available for OCB usage (802.11p).
Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com>
Link: https://lore.kernel.org/r/20191010181307.11821-1-ramonreisfontes@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Reduces per-rate data structure size
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20191008171139.96476-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Rate success probability usually fluctuates a lot under normal conditions.
With a simple EWMA, noise and fluctuation can be reduced by increasing the
window length, but that comes at the cost of introducing lag on sudden
changes.
This change replaces the EWMA implementation with a moving average that's
designed to significantly reduce lag while keeping a bigger window size
by being better at filtering out noise.
It is only slightly more expensive than the simple EWMA and still avoids
divisions in its calculation.
The algorithm is adapted from an implementation intended for a completely
different field (stock market trading), where the tradeoff of lag vs
noise filtering is equally important. It is based on the "smoothing filter"
from http://www.stockspotter.com/files/PredictiveIndicators.pdf.
I have adapted it to fixed-point math with some constants so that it uses
only addition, bit shifts and multiplication
To better make use of the filtering and bigger window size, the update
interval time is cut in half.
For testing, the algorithm can be reverted to the older one via debugfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20191008171139.96476-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use a slightly different threshold for downgrading spatial streams to
make it easier to calculate without divisions.
Slightly reduces CPU overhead.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20191008171139.96476-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
cfg80211_assign_cookie already checks & prevents a 0 from being
returned, so the explicit loop is unnecessary.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20191008164350.2836-1-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Test virtual server via ipip tunnel.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# Testing Tunnel mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
Test virtual server via NAT.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# ipvs.sh: PASS
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
Test virutal server via directing routing for IPv4.
Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.
On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...
Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <stable@vger.kernel.org>
Cc: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I'm interested in kdb / kgdb and have sent various fixes over the
years. I'd like to get CCed on patches so I can be aware of them and
also help review.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20190920104404.1.I237e68e8825e2d6ac26f8e847f521fe2fcc3705a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The spu_fs_context was not set in fc->fs_private, this caused a crash
when accessing ctx->mode in spufs_create_root().
Fixes: d2e0981c3b9a ("vfs: Convert spufs to use the new mount API")
Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191008141342.GA266797@gmail.com
|
|
We have two ways a request can be deferred:
1) It's a regular request that depends on another one
2) It's a timeout that tracks completions
We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.
Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Karsten Graul says:
====================
Fixes for -net, addressing two races in SMC receive path and
add a missing cleanup when the link group creating fails with
ISM devices and a VLAN id.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
smc_rx_recvmsg() first checks if data is available, and then if
RCV_SHUTDOWN is set. There is a race when smc_cdc_msg_recv_action() runs
in between these 2 checks, receives data and sets RCV_SHUTDOWN.
In that case smc_rx_recvmsg() would return from receive without to
process the available data.
Fix that with a final check for data available if RCV_SHUTDOWN is set.
Move the check for data into a function and call it twice.
And use the existing helper smc_rx_data_available().
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
smc_cdc_rxed_any_close_or_senddone() is used as an end condition for the
receive loop. This conflicts with smc_cdc_msg_recv_action() which could
run in parallel and set the bits checked by
smc_cdc_rxed_any_close_or_senddone() before the receive is processed.
In that case we could return from receive with no data, although data is
available. The same applies to smc_rx_wait().
Fix this by checking for RCV_SHUTDOWN only, which is set in
smc_cdc_msg_recv_action() after the receive was actually processed.
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
If creation of an SMCD link group with VLAN id fails, the initial
smc_ism_get_vlan() step has to be reverted as well.
Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
This will ensure that any new TSO related flags added (which
would be part of ALL_TSO mask and IPvlan driver doesn't need
to update every time new flag gets added.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix CML display by adding a missing ID.
- Drop redundant list_del_init
- Only enqueue already completed requests to avoid races
- Fixup preempt-to-busy vs reset of a virtual request
- Protect peeking at execlists->active
- execlists->active is serialised by the tasklet
drm-intel-next-fixes-2019-09-19:
- Extend old HSW workaround to fix some GPU hangs on Haswell GT2
- Fix return error code on GEM mmap.
- White list a chicken bit register for push constants legacy mode on Mesa
- Fix resume issue related to GGTT restore
- Remove incorrect BUG_ON on execlist's schedule-out
- Fix unrecoverable GPU hangs with Vulkan compute workloads on SKL
drm-intel-next-fixes-2019-09-26:
- Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010143039.GA15313@intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-10-09:
amdgpu:
- fix memory leak in bo_list ioctl error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010031023.23359-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
- SPI Aliases fixes for panels
- One fix for the tc358767 bridge dealing with visual artifacts
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010105137.j6juxht5dsobgxph@gilmour
|
|
Andrii Nakryiko says:
====================
With BPF maps supporting direct map access (currently, array_map w/ single
element, used for global data) that are read-only both from system call and
BPF side, it's possible for BPF verifier to track its contents as known
constants.
Now it's possible for user-space control app to pre-initialize read-only map
(e.g., for .rodata section) with user-provided flags and parameters and rely
on BPF verifier to detect and eliminate dead code resulting from specific
combination of input parameters.
v1->v2:
- BPF_F_RDONLY means nothing, stick to just map->frozen (Daniel);
- stick to passing just offset into map_direct_value_addr (Martin).
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add tests checking that verifier does proper constant propagation for
read-only maps. If constant propagation didn't work, skipp_loop and
part_loop BPF programs would be rejected due to BPF verifier otherwise
not being able to prove they ever complete. With constant propagation,
though, they are succesfully validated as properly terminating loops.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191009201458.2679171-3-andriin@fb.com
|
|
Maps that are read-only both from BPF program side and user space side
have their contents constant, so verifier can track referenced values
precisely and use that knowledge for dead code elimination, branch
pruning, etc. This patch teaches BPF verifier how to do this.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191009201458.2679171-2-andriin@fb.com
|
|
Added test case for layered IP operation for a single source IP4/IP6
address and a single destination IP4/IP6 address.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Commit 8960b38932be ("linux/dim: Rename externally used net_dim
members") renamed the net_dim API, removing the "net_" prefix from the
structures and functions. The patch didn't update the net_dim.txt
documentation file.
Fix the documentation so that its examples match the current code.
Fixes: 8960b38932be ("linux/dim: Rename externally used net_dim members", 2019-06-25)
Fixes: c002bd529d71 ("linux/dim: Rename externally exposed macros", 2019-06-25)
Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Cc: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Mariusz reported that invalid packets are sent after resume from
suspend if jumbo packets are active. It turned out that his BIOS
resets chip settings to non-jumbo on resume. Most chip settings are
re-initialized on resume from suspend by calling rtl_hw_start(),
so let's add configuring jumbo to this function.
There's nothing wrong with the commit marked as fixed, it's just
the first one where the patch applies cleanly.
Fixes: 7366016d2d4c ("r8169: read common register for PCI commit")
Reported-by: Mariusz Bialonczyk <manio@skyboo.net>
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl fixes for v5.4
This includes two fixes for Intel pinctrl drivers:
- Fix warning about shared irqchip
- Restore Strago DMI workaround for all versions
|
|
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
When I re-posted Sean's original commit to add the override mode for
the kevin panel, for some reason I didn't notice that the pixel clock
wasn't quite right. Looking at /sys/kernel/debug/clk/clk_summary on
downstream kernels it can be seen that the VOP clock is supposed to be
266,666,667 Hz achieved by dividing the 800 MHz PLL by 3.
Looking at history, it seems that even Sean's first patch [1] had this
funny clock rate. I'm not sure where it came from since the commit
message specifically mentioned 26666 kHz and the Chrome OS tree [2]
can be seen to request 266667 kHz.
In any case, let's fix it up. This together with my patch [3] to do
the proper rounding when setting the clock rate makes the VOP clock
more proper as seen in /sys/kernel/debug/clk/clk_summary.
[1] https://lore.kernel.org/r/20180206165626.37692-4-seanpaul@chromium.org
[2] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-4.4/drivers/gpu/drm/panel/panel-simple.c#1172
[3] https://lkml.kernel.org/r/20191003114726.v2.1.Ib233b3e706cf6317858384264d5b0ed35657456e@changeid
Fixes: 84ebd2da6d04 ("arm64: dts: rockchip: Specify override mode for kevin panel")
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191008124949.1.I674acd441997dd0690c86c9003743aacda1cf5dd@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix usb-c on X99 TV Box. Tested with armbian w/ kernel 5.3
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Link: https://lore.kernel.org/r/20190929032230.24628-1-npcomplete13@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the RockPro64 schematic [1] the rk3399 sdmmc controller is
connected to a microSD (TF card) slot. Remove the cap-mmc-highspeed
property of the sdmmc controller, since no mmc card can be connected here.
[1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf
Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64")
Signed-off-by: Soeren Moch <smoch@web.de>
Link: https://lore.kernel.org/r/20191004203213.4995-1-smoch@web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
It was reported that 72cd4064fcca "NOMMU: Toggle only bits in
EXC_RETURN we are really care of" breaks NOMMU+XIP combination.
It happens because saved EXC_RETURN gets overwritten when data
section is relocated.
The fix is to propagate EXC_RETURN via register and let relocation
code to commit that value into memory.
Fixes: 72cd4064fcca ("ARM: 8830/1: NOMMU: Toggle only bits in EXC_RETURN we are really care of")
Reported-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
KernelCI reports that bcm2835_defconfig is no longer booting since
commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") (https://lkml.org/lkml/2019/9/26/825).
I also received a regression report from Nicolas Saenz Julienne
(https://lkml.org/lkml/2019/9/27/263).
This problem has cropped up on bcm2835_defconfig because it enables
CONFIG_CC_OPTIMIZE_FOR_SIZE. The compiler tends to prefer not inlining
functions with -Os. I was able to reproduce it with other boards and
defconfig files by manually enabling CONFIG_CC_OPTIMIZE_FOR_SIZE.
The __get_user_check() specifically uses r0, r1, r2 registers.
So, uaccess_save_and_enable() and uaccess_restore() must be inlined.
Otherwise, those register assignments would be entirely dropped,
according to my analysis of the disassembly.
Prior to commit 9012d011660e ("compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING"), the 'inline' marker was always enough for
inlining functions, except on x86.
Since that commit, all architectures can enable CONFIG_OPTIMIZE_INLINING.
So, __always_inline is now the only guaranteed way of forcible inlining.
I added __always_inline to 4 functions in the call-graph from the
__get_user_check() macro.
Fixes: 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from
softirq context") there has been a race to the value of the sk_err if both
XPRT_SOCK_WAKE_ERROR and XPRT_SOCK_WAKE_DISCONNECT are set. In that case,
we may end up losing the sk_err value that existed when xs_error_report was
called.
Fix this by reverting to the previous behavior: instead of using SO_ERROR
to retrieve the value at a later time (which might also return sk_err_soft),
copy the sk_err value onto struct sock_xprt, and use that value to wake
pending tasks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Our client can issue multiple SETCLIENTID operations to the same
server in some circumstances. Ensure that calls to
nfs4_proc_setclientid() after the first one do not overwrite the
previously allocated cl_acceptor string.
unreferenced object 0xffff888461031800 (size 32):
comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s)
hex dump (first 32 bytes):
6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31 nfs@klimt.ib.101
35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00 5granger.net....
backtrace:
[<00000000ab820188>] __kmalloc+0x128/0x176
[<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss]
[<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4]
[<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4]
[<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4]
[<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4]
[<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4]
[<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4]
[<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4]
[<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c
[<00000000797e947c>] vfs_get_tree+0x20/0xc7
[<00000000ecabaaa8>] fc_mount+0xe/0x36
[<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d
[<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4]
[<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4]
[<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs]
Fixes: f11b2a1cfbf5 ("nfs4: copy acceptor name from context ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Add 2 additional hammer-like devices.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:
cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’
The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E")
Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support")
Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform")
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # v2.6.32+
Cc: linux-mips@vger.kernel.org
|
|
A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.
Thus we export the ASEs that can be used in userspace programs.
Reported-by: Meng Zhuo <mengzhuo1203@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paul.burton@mips.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Paul Burton <paul.burton@mips.com>
|
