summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-04net: phy: broadcom: Use bcm54xx_config_clock_delay() for BCM54612EFlorian Fainelli
bcm54612e_config_init() duplicates what bcm54xx_config_clock_delay() does with respect to configuring RGMII TX/RX delays appropriately. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: phy: broadcom: Fix RGMII delays configuration for BCM54210EFlorian Fainelli
Commit 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") added support for BCM54210E but also unconditionally cleared the RXC to RXD skew and the TXD to TXC skew, thus only making PHY_INTERFACE_MODE_RGMII a possible configuration. Use bcm54xx_config_clock_delay() which correctly sets the registers depending on the 4 possible PHY interface values that exist for RGMII. Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E") Reported-by: Manasa Mudireddy <manasa.mudireddy@broadcom.com> Reported-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04Merge branch 'net-tls-separate-the-TLS-TOE-code-out'David S. Miller
Jakub Kicinski says: ==================== net/tls: separate the TLS TOE code out We have 3 modes of operation of TLS - software, crypto offload (Mellanox, Netronome) and TCP Offload Engine-based (Chelsio). The last one takes over the socket, like any TOE would, and is not really compatible with how we want to do things in the networking stack. Confusingly the name of the crypto-only offload mode is TLS_HW, while TOE-offload related functions use tls_hw_ as their prefix. Engineers looking to implement offload are also be faced with TOE artefacts like struct tls_device (while, again, CONFIG_TLS_DEVICE actually gates the non-TOE offload). To improve the clarity of the offload code move the TOE code into new files, and rename the functions and structures appropriately. Because TOE-offload takes over the socket, and makes no use of the TLS infrastructure in the kernel, the rest of the code (anything beyond the ULP setup handlers) do not have to worry about the mode == TLS_HW_RECORD case. The increase in code size is due to duplication of the full license boilerplate. Unfortunately original author (Dave Watson) seems unreachable :( ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: allow compiling TLS TOE outJakub Kicinski
TLS "record layer offload" requires TOE, and bypasses most of the normal networking stack. It is also significantly less maintained. Allow users to compile it out to avoid issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_hw_* functions tls_toe_*Jakub Kicinski
The tls_hw_* functions are quite confusingly named, since they are related to the TOE-offload, not TLS_HW offload which doesn't require TOE. Rename them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related code to a separate fileJakub Kicinski
Move tls_hw_* functions to a new, separate source file to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move tls_build_proto() on init pathJakub Kicinski
Move tls_build_proto() so that TOE offload doesn't have to call it mid way through its bypass enable path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_device to tls_toe_deviceJakub Kicinski
Rename struct tls_device to struct tls_toe_device to avoid confusion with normal, non-TOE offload. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related structures to a separate headerJakub Kicinski
Move tls_device structure and register/unregister functions to a new header to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04rxrpc: Add missing "new peer" traceDavid Howells
There was supposed to be a trace indicating that a new peer had been created. Add it. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04rxrpc: Fix rxrpc_recvmsg tracepointDavid Howells
Fix the rxrpc_recvmsg tracepoint to handle being called with a NULL call parameter. Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04qmi_wwan: add support for Cinterion CLS8 devicesReinhard Speyerer
Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04Merge tag 'mips_fixes_5.4_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: - Build fixes for Cavium Octeon & PMC-Sierra MSP systems, as well as all pre-MIPSr6 configurations built with binutils < 2.25. - Boot fixes for 64-bit Loongson systems & SGI IP28 systems. - Wire up the new clone3 syscall. - Clean ups for a few build-time warnings. * tag 'mips_fixes_5.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fw/arc: Remove unused addr variable MIPS: pmcs-msp71xx: Remove unused addr variable MIPS: pmcs-msp71xx: Add missing MAX_PROM_MEM definition mips: Loongson: Fix the link time qualifier of 'serial_exit()' MIPS: init: Prevent adding memory before PHYS_OFFSET MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem start MIPS: VDSO: Fix build for binutils < 2.25 MIPS: VDSO: Remove unused gettimeofday.c MIPS: Wire up clone3 syscall MIPS: octeon: Include required header; fix octeon ethernet build MIPS: cpu-bugs64: Mark inline functions as __always_inline MIPS: dts: ar9331: fix interrupt-controller size MIPS: Loongson64: Fix boot failure after dropping boot_mem_map
2019-10-04Merge tag 'riscv/for-v5.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: - Ensure that exclusive-load reservations are terminated after system call or exception handling. This primarily affects QEMU, which does not expire load reservations. - Fix an issue primarily affecting RV32 platforms that can cause the DT header to be corrupted, causing boot failures. * tag 'riscv/for-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix memblock reservation for device tree blob RISC-V: Clear load reservations while restoring hart contexts
2019-10-04arm64: dts: rockchip: fix RockPro64 sdhci settingsSoeren Moch
The RockPro64 schematics [1], [2] show that the rk3399 EMMC_STRB pin is connected to the RESET pin instead of the DATA_STROBE pin of the eMMC module. So the data strobe cannot be used for its intended purpose on this board, and so the HS400 eMMC mode is not functional. Limit the controller to HS200. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191003215036.15023-2-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-04arm64: dts: rockchip: fix RockPro64 vdd-log regulator settingsSoeren Moch
The RockPro64 schematic [1] page 18 states a min voltage of 0.8V and a max voltage of 1.4V for the VDD_LOG pwm regulator. However, there is an additional note that the pwm parameter needs to be modified. From the schematics a voltage range of 0.8V to 1.7V can be calculated. Additional voltage measurements on the board show that this fix indeed leads to the correct voltage, while without this fix the voltage was set too high. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@web.de> Link: https://lore.kernel.org/r/20191003215036.15023-1-smoch@web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-04Merge tag 'devicetree-fixes-for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: "Fix several 'dt_binding_check' build failures" * tag 'devicetree-fixes-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: phy: lantiq: Fix Property Name dt-bindings: iio: ad7192: Fix DTC warning in the example dt-bindings: iio: ad7192: Fix Regulator Properties dt-bindings: media: rc: Fix redundant string dt-bindings: dsp: Fix fsl,dsp example
2019-10-04bpf: Add loop test case with 32 bit reg comparison against 0Daniel Borkmann
Add a loop test with 32 bit register against 0 immediate: # ./test_verifier 631 #631/p taken loop with back jump to 1st insn, 2 OK Disassembly: [...] 1b: test %edi,%edi 1d: jne 0x0000000000000014 [...] Pretty much similar to prior "taken loop with back jump to 1st insn" test case just as jmp32 variant. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com>
2019-10-04bpf, x86: Small optimization in comparing against imm0Daniel Borkmann
Replace 'cmp reg, 0' with 'test reg, reg' for comparisons against zero. Saves 1 byte of instruction encoding per occurrence. The flag results of test 'reg, reg' are identical to 'cmp reg, 0' in all cases except for AF which we don't use/care about. In terms of macro-fusibility in combination with a subsequent conditional jump instruction, both have the same properties for the jumps used in the JIT translation. For example, same JITed Cilium program can shrink a bit from e.g. 12,455 to 12,317 bytes as tests with 0 are used quite frequently. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com>
2019-10-04RDMA/mlx5: Add missing synchronize_srcu() for MW casesJason Gunthorpe
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Put live in the correct place for ODP MRsJason Gunthorpe
live is used to signal to the pagefault thread that the MR is initialized and ready for use. It should be after the umem is assigned and all other setup is completed. This prevents races (at least) of the form: CPU0 CPU1 mlx5_ib_alloc_implicit_mr() implicit_mr_alloc() live = 1 imr->umem = umem num_pending_prefetch_inc() if (live) atomic_inc(num_pending_prefetch) atomic_set(num_pending_prefetch,0) // Overwrites other thread's store Further, live is being used with SRCU as the 'update' in an acquire/release fashion, so it can not be read and written raw. Move all live = 1's to after MR initialization is completed and use smp_store_release/smp_load_acquire() for manipulating it. Add a missing live = 0 when an implicit MR child is deleted, before queuing work to do synchronize_srcu(). The barriers in update_odp_mr() were some broken attempt to create a acquire/release, but were not even applied consistently and missed the point, delete it as well. Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcuJason Gunthorpe
During destroy setting live = 0 and then synchronize_srcu() prevents num_pending_prefetch from incrementing, and also, ensures that all work holding that count is queued on the WQ. Testing before causes races of the form: CPU0 CPU1 dereg_mr() mlx5_ib_advise_mr_prefetch() srcu_read_lock() num_pending_prefetch_inc() if (!live) live = 0 atomic_read() == 0 // skip flush_workqueue() atomic_inc() queue_work(); srcu_read_unlock() WARN_ON(atomic_read()) // Fails Swap the order so that the synchronize_srcu() prevents this. Fixes: a6bc3875f176 ("IB/mlx5: Protect against prefetch of invalid MR") Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages()Jason Gunthorpe
This fixes a race of the form: CPU0 CPU1 mlx5_ib_invalidate_range() mlx5_ib_invalidate_range() // This one actually makes npages == 0 ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) // This one does nothing ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) dying = 1; dying = 1; schedule_work(&umem_odp->work); // Double schedule of the same work schedule_work(&umem_odp->work); // BOOM npages and dying must be read and written under the umem_mutex lock. Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call mlx5_ib_update_xlt, and both need to be done in the same locking region, hoist the lock out of unmap. This avoids an expensive double critical section in mlx5_ib_invalidate_range(). Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MRJason Gunthorpe
mlx5_ib_update_xlt() must be protected against parallel free of the MR it is accessing, also it must be called single threaded while updating the HW. Otherwise we can have races of the form: CPU0 CPU1 mlx5_ib_update_xlt() mlx5_odp_populate_klm() odp_lookup() == NULL pklm = ZAP implicit_mr_get_data() implicit_mr_alloc() <update interval tree> mlx5_ib_update_xlt mlx5_odp_populate_klm() odp_lookup() != NULL pklm = VALID mlx5_ib_post_send_wait() mlx5_ib_post_send_wait() // Replaces VALID with ZAP This can be solved by putting both the SRCU and the umem_mutex lock around every call to mlx5_ib_update_xlt(). This ensures that the content of the interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr) will not change while it is running, and thus the posted WRs to update the KLM will always reflect the correct information. The race above will resolve by either having CPU1 wait till CPU0 completes the ZAP or CPU0 will run after the add and instead store VALID. The pagefault path adding children already holds the umem_mutex and SRCU, so the only missed lock is during MR destruction. Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Do not allow rereg of a ODP MRJason Gunthorpe
This code is completely broken, the umem of a ODP MR simply cannot be discarded without a lot more locking, nor can an ODP mkey be blithely destroyed via destroy_mkey(). Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04IB/core: Fix wrong iterating on portsMohamad Heib
rdma_for_each_port is already incrementing the iterator's value it receives therefore, after the first iteration the iterator is increased by 2 which eventually causing wrong queries and possible traces. Fix the above by removing the old redundant incrementation that was used before rdma_for_each_port() macro. Cc: <stable@vger.kernel.org> Fixes: ea1075edcbab ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Reviewed-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04MIPS: fw/arc: Remove unused addr variablePaul Burton
The addr variable in prom_free_prom_memory() has been unused since commit 0df1007677d5 ("MIPS: fw: Record prom memory"), leading to a compiler warning: arch/mips/fw/arc/memory.c:163:16: warning: unused variable 'addr' [-Wunused-variable] Fix this by removing the unused variable. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 0df1007677d5 ("MIPS: fw: Record prom memory") Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org
2019-10-04RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error pathLeon Romanovsky
Properly unwind QP counter rebinding in case of failure. Trying to rebind the counter after unbiding it is not going to work reliably, move the unbind to the end so it doesn't have to be unwound. Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM and x86 bugfixes of all kinds. The most visible one is that migrating a nested hypervisor has always been busted on Broadwell and newer processors, and that has finally been fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: x86: omit "impossible" pmu MSRs from MSR list KVM: nVMX: Fix consistency check on injected exception error code KVM: x86: omit absent pmu MSRs from MSR list selftests: kvm: Fix libkvm build error kvm: vmx: Limit guest PMCs to those supported on the host kvm: x86, powerpc: do not allow clearing largepages debugfs entry KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF selftests: kvm: add test for dirty logging inside nested guests KVM: x86: fix nested guest live migration with PML KVM: x86: assign two bits to track SPTE kinds KVM: x86: Expose XSAVEERPTR to the guest kvm: x86: Enumerate support for CLZERO instruction kvm: x86: Use AMD CPUID semantics for AMD vCPUs kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH KVM: X86: Fix userspace set invalid CR4 kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH arm64: KVM: Kill hyp_alternate_select() ...
2019-10-04RDMA/cxgb4: Do not dma memory off of the stackGreg KH
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-04Merge branch 'devlink-allow-devlink-instances-to-change-network-namespace'David S. Miller
Jiri Pirko says: ==================== devlink: allow devlink instances to change network namespace Devlink from the beginning counts with network namespaces, but the instances has been fixed to init_net. Implement change of network namespace as part of "devlink reload" procedure like this: $ ip netns add testns1 $ devlink/devlink dev reload netdevsim/netdevsim10 netns testns1 This command reloads device "netdevsim10" into network namespace "testns1". Note that "devlink reload" reinstantiates driver objects, effectively it reloads the driver instance, including possible hw reset etc. Newly created netdevices respect the network namespace of the parent devlink instance and according to that, they are created in target network namespace. Driver is able to refuse to be reloaded into different namespace. That is the case of mlx4 right now. FIB entries and rules are replayed during FIB notifier registration which is triggered during reload (driver instance init). FIB notifier is also registered to the target network namespace, that allows user to use netdevsim devlink resources to setup per-namespace limits of FIB entries and FIB rules. In fact, with multiple netdevsim instances in each network namespace, user might setup different limits. This maintains and extends current netdevsim resources behaviour. Patch 1 prepares netdevsim code for the follow-up changes in the patchset. It does not change the behaviour, only moves pet-init_netns accounting to netdevsim instance, which is also in init_netns. Patches 2-5 prepare the FIB notifier making it per-netns and to behave correctly upon error conditions. Patch 6 just exports a devlink_net helper so it can be used in drivers. Patches 7-9 do preparations in mlxsw driver. Patches 10-13 do preparations in netdevsim driver, namely patch 12 implements proper devlink reload where the driver instance objects are actually re-created as they should be. Patch 14 actually implements the possibility to reload into a different network namespace. Patch 15 adds needed selftests for devlink reload into namespace for netdevsim driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04selftests: netdevsim: add tests for devlink reload with resourcesJiri Pirko
Add couple of tests for devlink reload testing and also resource limitations testing, along with devlink reload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: devlink: allow to change namespaces during reloadJiri Pirko
All devlink instances are created in init_net and stay there for a lifetime. Allow user to be able to move devlink instances into namespaces during devlink reload operation. That ensures proper re-instantiation of driver objects, including netdevices. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: take devlink net instead of init_netJiri Pirko
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: register port netdevices into net of deviceJiri Pirko
Register newly created port netdevice into net namespace that the parent device belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: implement proper devlink reloadJiri Pirko
During devlink reload, all driver objects should be reinstantiated with the exception of devlink instance and devlink resources and params. Move existing devlink_resource_size_get() calls into fib_create() just before fib notifier is registered. Also, make sure that extack is propagated down to fib_notifier_register() call. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: add all ports in nsim_dev_create() and del them in destroy()Jiri Pirko
Currently the probe/remove function does this separately. Put the addition an deletion of ports into nsim_dev_create() and nsim_dev_destroy(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum: Take devlink net instead of init_netJiri Pirko
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: devlink: export devlink net getterJiri Pirko
Allow drivers to get net struct for devlink instance. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: propagate extack down to the notifier block callbackJiri Pirko
Since errors are propagated all the way up to the caller, propagate possible extack of the caller all the way down to the notifier block callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum_router: Don't rely on missing extack to symbolize dumpJiri Pirko
Currently if info->extack is NULL, mlxsw assumes that the event came down from dump. Originally, the dump did not propagate the return value back to the original caller (fib_notifier_register()). However, that is now happening. So benefit from this and push the error up if it happened. Remove rule cases in work handlers that are now dead code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: propagate possible error during fib notifier registrationJiri Pirko
Unlike events for registered notifier, during the registration, the errors that happened for the block being registered are not propagated up to the caller. Make sure the error is propagated for FIB rules and entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: make FIB notifier per-netnsJiri Pirko
Currently all users of FIB notifier only cares about events in init_net. Later in this patchset, users get interested in other namespaces too. However, for every registered block user is interested only about one namespace. Make the FIB notifier registration per-netns and avoid unnecessary calls of notifier block for other namespaces. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04netdevsim: change fib accounting and limitations to be per-deviceJiri Pirko
Currently, the accounting is done per-namespace. However, devlink instance is always in init_net namespace for now, so only the accounting related to init_net is used. Limitations set using devlink resources are only considered for init_net. nsim_devlink_net() always returns init_net always. Make the accounting per-device. This brings no functional change. Per-device accounting has the same values as per-net. For a single netdevsim instance, the behaviour is exactly the same as before. When multiple netdevsim instances are created, each can have different limits. This is in prepare to implement proper devlink netns support. After that, the devlink instance which would exist in particular netns would account and limit that netns. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04RDMA/cm: Fix memory leak in cm_add/remove_oneJack Morgenstein
In the process of moving the debug counters sysfs entries, the commit mentioned below eliminated the cm_infiniband sysfs directory. This sysfs directory was tied to the cm_port object allocated in procedure cm_add_one(). Before the commit below, this cm_port object was freed via a call to kobject_put(port->kobj) in procedure cm_remove_port_fs(). Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated. This, however, meant that kfree was never called for the cm_port buffers. Fix this by adding explicit kfree(port) calls to functions cm_add_one() and cm_remove_one(). Note: the kfree call in the first chunk below (in the cm_add_one error flow) fixes an old, undetected memory leak. Fixes: c87e65cfb97c ("RDMA/cm: Move debug counters to be under relevant IB device") Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/core: Fix an error handling path in 'res_get_common_doit()'Christophe JAILLET
According to surrounding error paths, it is likely that 'goto err_get;' is expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be missing. Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04regulator: qcom-rpmh: Fix PMIC5 BoB min voltageKiran Gunda
Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct the voltage selector accordingly. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570184215-5355-1-git-send-email-kgunda@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 22:59:48 +0000