summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-21tracing: Fix race in perf_trace_buf initializationPrateek Sood
A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-22x86/cpu/vmware: Fix platform detection VMWARE_PORT macroThomas Hellstrom
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT definition, but expects it to be an integer. However, when it was moved to the new vmware.h include file, it was changed to be a string to better fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the platform detection VMWARE_PORT functionality. Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB definitions to be integers, and use __stringify() for their stringified form when needed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvmThomas Hellstrom
LLVM's assembler doesn't accept the short form INL instruction: inl (%%dx) but instead insists on the output register to be explicitly specified. This was previously fixed for the VMWARE_PORT macro. Fix it also for the VMWARE_HYPERCALL macro. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: clang-built-linux@googlegroups.com Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-21xdp: Handle device unregister for devmap_hash map typeToke Høiland-Jørgensen
It seems I forgot to add handling of devmap_hash type maps to the device unregister hook for devmaps. This omission causes devices to not be properly released, which causes hangs. Fix this by adding the missing handler. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191019111931.2981954-1-toke@redhat.com
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 5.4, please pull the following: - Stefan removes the activity LED node from the CM3 DTS since there is no driver for that LED yet and leds-gpio cannot drive it either * tag 'arm-soc/for-5.4/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Link: https://lore.kernel.org/r/20191021194302.21024-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.4, please pull the following: - Stefan fixes the MMC controller bus-width property for the Raspberry Pi Zero Wireless which was incorrect after a prior refactoring * tag 'arm-soc/for-5.4/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci Link: https://lore.kernel.org/r/20191015172356.9650-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'davinci-fixes-for-v5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes DaVinci fixes for v5.4 ====================== * fix GPIO backlight support on DA850 by enabling the needed config in davinci_all_defconfig. This is a fix because the driver and board support got converted to use BACKLIGHT_GPIO driver, but defconfig update is still missing in v5.4. * fix for McBSP DMA on DM365 * tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'v5.4-rockchip-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A number of fixes for individual boards like the rockpro64, and Hugsun X99 as well as a fix for the Gru-Kevin display override and fixing the dt- binding for Theobroma boards to the correct naming that is also actually used in the wild. * tag 'v5.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix override mode for rk3399-kevin panel arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box arm64: dts: rockchip: fix RockPro64 sdmmc settings arm64: dts: rockchip: fix RockPro64 sdhci settings arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings dt-bindings: arm: rockchip: fix Theobroma-System board bindings arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Link: https://lore.kernel.org/r/1599050.HRXuSXmxRg@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'imx-fixes-5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4: - Re-enable SNVS power key for imx6q-logicpd board which was accidentally disabled by a SoC level change. - Fix I2C switches on vf610-zii-scu4-aib board by specifying property i2c-mux-idle-disconnect. - A fix on imx-scu API that reads UID from firmware to avoid kernel NULL pointer dump. - A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock. - A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option explicitly into imx_v6_v7_defconfig. - Fix ARM regulator states issue for zii-ultra board, which is impacting stability of the board. - A correction on CPU core idle state name for LayerScape LX2160A SoC. * tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'omap-for-v5.4/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle More fixes for omap variants: - Update more panel options in omap2plus_defconfig that got changed as we moved to use generic LCD panels - Remove unused twl_keypad for logicpd-torpedo-som to avoid boot time warnings. This is only a cosmetic fix, but at least dmesg output is now getting more readable after all the fixes to remove pointless warnings - Fix gpu_cm node name as we still have a non-standard node name dependency for clocks. This should eventually get fixed by use of domain specific compatible property - Fix use of i2c-mux-idle-disconnect for m3874-iceboard - Use level interrupt for omap4 & 5 wlcore to avoid lost edge interrupts * tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use level interrupt for omap4 & 5 wlcore ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage ARM: dts: omap5: fix gpu_cm clock provider name ARM: dts: logicpd-torpedo-som: Remove twl_keypad ARM: omap2plus_defconfig: Fix selected panels after generic panel changes Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2Kazutoshi Noguchi
This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 5.4, please pull the following: - Rayangonda fixes the GPIO pins assignment for the Stringray SoCs * tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: Fix gpio to pinmux mapping Link: https://lore.kernel.org/r/20191015172356.9650-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21net/sched: act_police: re-use tcf_tm_dump()Davide Caratti
Use tcf_tm_dump(), instead of an open coded variant (no functional change in this patch). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21ipv4: fix IPSKB_FRAG_PMTU handling with fragmentationEric Dumazet
This patch removes the iph field from the state structure, which is not properly initialized. Instead, add a new field to make the "do we want to set DF" be the state bit and move the code to set the DF flag from ip_frag_next(). Joint work with Pablo and Linus. Fixes: 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") Reported-by: Patrick Schönthaler <patrick@notvads.ovh> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge branch 'phy-marvell-support-downshift-as-PHY-tunable'David S. Miller
Heiner Kallweit says: ==================== net: phy: marvell: support downshift as PHY tunable So far downshift is implemented for one small use case only and can't be controlled from userspace. So let's implement this feature properly as a PHY tunable so that it can be controlled via ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: phy: marvell: remove superseded function marvell_set_downshiftHeiner Kallweit
Instead of superseded function marvell_set_downshift() we can use new function m88e1111_set_downshift() in m88e1116r_config_init(). For this m88e1116r_config_init() has to be moved in the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: phy: marvell: support downshift as PHY tunableHeiner Kallweit
So far downshift is implemented for one small use case only and can't be controlled from userspace. So let's implement this feature properly as a PHY tunable so that it can be controlled via ethtool. More Marvell PHY's may support downshift, but I restricted it for now to the ones where I have the datasheet. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21ARM: 8926/1: v7m: remove register save to stack before svcafzal mohammed
r0-r3 & r12 registers are saved & restored, before & after svc respectively. Intention was to preserve those registers across thread to handler mode switch. On v7-M, hardware saves the register context upon exception in AAPCS complaint way. Restoring r0-r3 & r12 is done from stack location where hardware saves it, not from the location on stack where these registers were saved. To clarify, on stm32f429 discovery board: 1. before svc, sp - 0x90009ff8 2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b 3. upon svc, h/w decrements sp by 32 & pushes registers onto stack 4. after svc, sp - 0x90009fd8 5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb Above means r0-r3,r12 is not restored from the location where they are saved, but since hardware pushes the registers onto stack, the registers are restored correctly. Note that during register saving to stack (step 2), it goes past 0x9000a000. And it seems, based on objdump, there are global symbols residing there, and it perhaps can cause issues on a non-XIP Kernel (on XIP, data section is setup later). Based on the analysis above, manually saving registers onto stack is at best no-op and at worst can cause data section corruption. Hence remove storing of registers onto stack before svc. Fixes: b70cd406d7fe ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode") Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-21tc-testing: updated pedit TDC testsRoman Mashak
Added test cases for IP header operations: - set tos/precedence - add value to tos/precedence - clear tos/precedence - invert tos/precedence Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge branch 'mvneta-xdp'David S. Miller
Lorenzo Bianconi says: ==================== add XDP support to mvneta driver Add XDP support to mvneta driver for devices that rely on software buffer management. Supported verdicts are: - XDP_DROP - XDP_PASS - XDP_REDIRECT - XDP_TX Moreover set ndo_xdp_xmit net_device_ops function pointer in order to support redirecting from other device (e.g. virtio-net). Convert mvneta driver to page_pool API. This series is based on previous work done by Jesper and Ilias. We will send follow-up patches to reduce DMA-sync operations. Changes since v4: - reset page_pool pointer to NULL in mvneta_rxq_drop_pkts and in mvneta_create_page_pool error path - move dma sync in mvneta_rx_refill() in patch 2/7 - verify bpf prog pointer in mvneta_xdp_setup to double-check if stop/start is really necessary - coding style fixes Changes since v3: - rename MVNETA_XDP_CONSUMED in MVNETA_XDP_DROPPED - squash patch 4/8 and patch 3/8 - fix dma sync for XDP_TX verdict - fix queue_index in xdp_rxq_info_reg - cosmetics Changes since v2: - rely on page_pool_recycle_direct instead of xdp_return_buff for XDP_DROP - define xdp buffer in mvneta_rx_swbm and avoid default initializations - use dma_sync_single_for_cpu instead of dma_sync_single_range_for_cpu - run page_pool_release_page in mvneta_swbm_add_rx_fragment even if the buffer contains just ETH_FCS Changes since v1: - sync dma buffers before refilling hw queues - fix stats accounting Changes since RFC: - implement XDP_TX - make tx pending buffer list agnostic - code refactoring - check if device is running in mvneta_xdp_setup ==================== Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: add XDP_TX supportLorenzo Bianconi
Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: make tx buffer array agnosticLorenzo Bianconi
Allow tx buffer array to contain both skb and xdp buffers in order to enable xdp frame recycling adding XDP_TX verdict support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: move header prefetch in mvneta_swbm_rx_frameLorenzo Bianconi
Move data buffer prefetch in mvneta_swbm_rx_frame after dma_sync_single_range_for_cpu Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: add basic XDP supportLorenzo Bianconi
Add basic XDP support to mvneta driver for devices that rely on software buffer management. Currently supported verdicts are: - XDP_DROP - XDP_PASS - XDP_REDIRECT - XDP_ABORTED - iptables drop: $iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP $nstat -n && sleep 1 && nstat IpInReceives 151169 0.0 IpExtInOctets 6953544 0.0 IpExtInNoECTPkts 151165 0.0 - XDP_DROP via xdp1 $./samples/bpf/xdp1 3 proto 0: 421419 pkt/s proto 0: 421444 pkt/s proto 0: 421393 pkt/s proto 0: 421440 pkt/s proto 0: 421184 pkt/s Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: rely on build_skb in mvneta_rx_swbm poll routineLorenzo Bianconi
Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to allocate skb since the previous patch introduced buffer recycling using the page_pool API. This patch fixes even an issue in the original driver where dma buffers are accessed before dma sync. mvneta driver can run on not cache coherent devices so it is necessary to sync DMA buffers before sending them to the device in order to avoid memory corruptions. Running perf analysis we can see a performance cost associated with this DMA-sync (anyway it is already there in the original driver code). In follow up patches we will add more logic to reduce DMA-sync as much as possible. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: introduce page pool API for sw buffer managerLorenzo Bianconi
Use the page_pool api for allocations and DMA handling instead of __dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page(). Pages are unmapped using page_pool_release_page before packets go into the network stack. The page_pool API offers buffer recycling capabilities for XDP but allocates one page per packet, unless the driver splits and manages the allocated page. This is a preliminary patch to add XDP support to mvneta driver Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: introduce mvneta_update_stats routineLorenzo Bianconi
Introduce mvneta_update_stats routine to collect {rx/tx} statistics (packets and bytes). This is a preliminary patch to add XDP support to mvneta driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21igc: Clean up unused shadow_vfta pointerSasha Neftin
VLAN filter table array not implemented yet and shadow_vfta pointer not used. Clean up the code and remove the unused shadow_vfta pointer. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add Rx checksum supportSasha Neftin
Extend the socket buffer field process and add Rx checksum functionality Minor: fix indentation with tab instead of spaces. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add set_rx_mode supportSasha Neftin
Add multicast addresses list to the MTA table. Implement basic Rx mode support. Add option for IPv6 address settings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21e1000e: Add support for S0ixSasha Neftin
Implement flow for S0ix support. Modern SoCs support S0ix low power states during idle periods, which are sub-states of ACPI S0 that increase power saving while supporting an instant-on experience for providing lower latency that ACPI S0. The S0ix states shut off parts of the SoC when they are not in use, while still maintaning optimal performance. This patch add support for S0ix started from an Ice Lake platform. Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add SCTP CRC checksumming functionalitySasha Neftin
Add stream control transmission protocol CRC checksum. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21Input: st1232 - fix reporting multitouch coordinatesDixit Parmar
For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data. Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: stable@vger.kernel.org Fixes: 351e0592bfea ("Input: st1232 - add support for st1633") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561 Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-21Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: add some cleanups & optimizations This patchset includes some cleanups and optimizations for the HNS3 ethernet driver. [patch 1/8] removes unused and unnecessary structures. [patch 2/8] uses a ETH_ALEN u8 array to replace two mac_addr_* field in struct hclge_mac_mgr_tbl_entry_cmd. [patch 3/8] optimizes the barrier used in the IO path. [patch 4/8] introduces macro ring_to_netdev() to get netdevive from struct hns3_enet_ring variable. [patch 5/8] makes struct hns3_enet_ring to be cacheline aligned [patch 6/8] adds a minor cleanup for hns3_handle_rx_bd(). [patch 7/8] removes linear data allocating for fraglist SKB. [patch 8/8] clears hardware error when resetting. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: log and clear hardware error after reset completeJian Shen
When device is resetting, the CMDQ service may be stopped until reset completed. If a new RAS error occurs at this moment, it will no be able to clear the RAS source. This patch fixes it by clear the RAS source after reset complete. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: do not allocate linear data for fraglist skbYunsheng Lin
Currently, napi_alloc_skb() is used to allocate skb for fraglist when the head skb is not enough to hold the remaining data, and the remaining data is added to the frags part of the fraglist skb, leaving the linear part unused. So this patch passes length of 0 to allocate fraglist skb with zero size of linear data. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: minor cleanup for hns3_handle_rx_bd()Yunsheng Lin
Since commit e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll"), ring->skb is used to record the current SKB when processing the RX BD in hns3_handle_rx_bd(), so the parameter out_skb is unnecessary. This patch also adjusts the err checking to reduce duplication in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put it in the unlikely annotation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: make struct hns3_enet_ring cacheline alignedYunsheng Lin
Since struct hns3_enet_ring is a frequently used in critical data path, so make it cacheline aligned as struct hns3_enet_tqp_vector. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: introduce ring_to_netdev() in enet moduleYunsheng Lin
There are a few places that need to access the netdev of a ring through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct which both in enet and hclge modules, it is better to use the struct that is only used in enet module. This patch adds the ring_to_netdev() to access the netdev of ring through ring->tqp_vector->napi.dev. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: minor optimization for barrier in IO pathYunsheng Lin
Currently, the TX and RX ring in a queue is bounded to the same IRQ, there may be unnecessary barrier op when only one of the ring need to be processed. This patch adjusts the location of rmb() in hns3_clean_tx_ring() and adds a checking in hns3_clean_rx_ring() to avoid unnecessary barrier op when there is nothing to do for the ring. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: optimized MAC address in management table.Guojia Liao
mac_addr_hi32 and mac_addr_lo16 are used to store the MAC address for management table. But using array of mac_addr[ETH_ALEN] would be more general and not need to care about the big-endian mode of the CPU. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: remove struct hns3_nic_ring_data in hns3_enet moduleYunsheng Lin
Only the queue_index field in struct hns3_nic_ring_data is used, other field is unused and unnecessary for hns3 driver, so this patch removes it and move the queue_index field to hns3_enet_ring. This patch also removes an unused struct hns_queue declaration. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge tag 'mlx5-fixes-2019-10-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 kTLS fixes 18-10-2019 This series introduces kTLS related fixes to mlx5 driver from Tariq, and two misc memory leak fixes form Navid Emamdoost. Please pull and let me know if there is any problem. I would appreciate it if you queue up kTLS fixes from the list below to stable kernel v5.3 ! For -stable v4.13: nett/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Bluetooth: hci_bcm: Fix RTS handling during startupStefan Wahren
The RPi 4 uses the hardware handshake lines for CYW43455, but the chip doesn't react to HCI requests during DT probe. The reason is the inproper handling of the RTS line during startup. According to the startup signaling sequence in the CYW43455 datasheet, the hosts RTS line must be driven after BT_REG_ON and BT_HOST_WAKE. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-21Revert "Bluetooth: hci_qca: Add delay for wcn3990 stability"Jeffrey Hugo
This reverts commit cde9dde6e11a5ab54b6462cd46d82878926783bc. The frame reassembly errors were root caused to a transient gpio issue. The missing response was root caused to an issue with properly managing RFR in the uart driver. Addressing those root causes occurs outside of hci_qca and eliminates the need for the 50ms delay, so remove it. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-21mmc: mxs: fix flags passed to dmaengine_prep_slave_sgSascha Hauer
Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not changed all users to this flag though. This patch fixes it for the mxs-mmc driver. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Fabio Estevam <festevam@gmail.com> Reported-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-10-21virtiofs: Retry request submission from worker contextVivek Goyal
If regular request queue gets full, currently we sleep for a bit and retrying submission in submitter's context. This assumes submitter is not holding any spin lock. But this assumption is not true for background requests. For background requests, we are called with fc->bg_lock held. This can lead to deadlock where one thread is trying submission with fc->bg_lock held while request completion thread has called fuse_request_end() which tries to acquire fc->bg_lock and gets blocked. As request completion thread gets blocked, it does not make further progress and that means queue does not get empty and submitter can't submit more requests. To solve this issue, retry submission with the help of a worker, instead of retrying in submitter's context. We already do this for hiprio/forget requests. Reported-by: Chirantan Ekbote <chirantan@chromium.org> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: Count pending forgets as in_flight forgetsVivek Goyal
If virtqueue is full, we put forget requests on a list and these forgets are dispatched later using a worker. As of now we don't count these forgets in fsvq->in_flight variable. This means when queue is being drained, we have to have special logic to first drain these pending requests and then wait for fsvq->in_flight to go to zero. By counting pending forgets in fsvq->in_flight, we can get rid of special logic and just wait for in_flight to go to zero. Worker thread will kick and drain all the forgets anyway, leading in_flight to zero. I also need similar logic for normal request queue in next patch where I am about to defer request submission in the worker context if queue is full. This simplifies the code a bit. Also add two helper functions to inc/dec in_flight. Decrement in_flight helper will later used to call completion when in_flight reaches zero. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: Set FR_SENT flag only after request has been sentVivek Goyal
FR_SENT flag should be set when request has been sent successfully sent over virtqueue. This is used by interrupt logic to figure out if interrupt request should be sent or not. Also add it to fqp->processing list after sending it successfully. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: No need to check fpq->connected stateVivek Goyal
In virtiofs we keep per queue connected state in virtio_fs_vq->connected and use that to end request if queue is not connected. And virtiofs does not even touch fpq->connected state. We probably need to merge these two at some point of time. For now, simplify the code a bit and do not worry about checking state of fpq->connected. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 17:04:32 +0000