summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-13wifi: mac80211: add flush_sta methodJohannes Berg
Some drivers like iwlwifi might have per-STA queues, so we may want to flush/drop just those queues rather than all when removing a station. Add a separate method for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: mac80211: flush queues on STA removalJohannes Berg
When we remove a station, we first make it unreachable, then we (must) remove its keys, and then remove the station itself. Depending on the hardware design, if we have hardware crypto at all, frames still sitting on hardware queues may then be transmitted without a valid key, possibly unencrypted or with a fixed key. Fix this by flushing the queues when removing stations so this cannot happen. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: ieee80211: correctly mark FTM frames non-bufferableJohannes Berg
The checks of whether or not a frame is bufferable were not taking into account that some action frames aren't, such as FTM. Check this, which requires some changes to the function ieee80211_is_bufferable_mmpdu() since we need the whole skb for the checks now. Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: ieee80211: clean up public action codesJohannes Berg
WLAN_PUBLIC_ACTION_FTM_RESPONSE is duplicated with WLAN_PUB_ACTION_FTM, but that might better be called WLAN_PUB_ACTION_FTM_RESPONSE; clean up here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: don't set CHECKSUM_COMPLETE for unsupported protocolsAvraham Stern
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols which results in a warning. Fix it. Fixes: b6f5b647f694 ("iwlwifi: mvm: handle RX checksum on Bz devices") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: trans: don't trigger d3 interrupt twiceAvraham Stern
When the IPC registers are used for sleep control, setting the IPC sleep bit already triggers an interrupt to the fw, so there is no need to also set the doorbell. Setting also the doorbell triggers the sleep interrupt twice which lead to an assert. Fixes: af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configurations for Bnj-a0 and specific rf devicesMukesh Sisodiya
Correction in config data is done for loading the ucode. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.879b654c8d83.I7dbea9f411a0b6f47908c4ad6321c7e55cbeb636@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update init sequence if tx diversity supportedMukesh Sisodiya
PHY configuration command need to be sent to FW if the tx diversity with SISO is supported. This need to be sent to get the init notification from FW. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: move function sequenceMukesh Sisodiya
Need to move a function definition and actual changes will be done in following commit. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.00a6c203712f.I7c099e5c1954f1daa5a5039b98149b6f081e46ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm: Update HE capabilities on 6GHz band for EHT deviceDaniel Gabay
Max A-MPDU length exponent shall be set to 2 for EHT capable device on 6GHz band in order to support 4MB aggregation. Update HE MAC capabilities accordingly for station and softap interfaces. This change requires to add another ieee80211_sband_iftype_data for uhb since high/uhb are no longer the same. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.1eee32cfd199.I9c5ff3a6956d509137deca620814935149516fbc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: refactor TX csum mode checkJohannes Berg
There are two modes now, and we have two places checking that must be in sync. Refactor the logic into a new small helper function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ef6246f4b73b.I44820ec095634dd0bba3007465cf25e4ce1c77c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: fix A-MSDU checksJohannes Berg
Since Gl A-step devices use the old checksum hardware, we shouldn't use the Bz code to check for A-MSDU combining ability; fix that. Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: enable bz hw checksum from c stepGolan Ben Ami
B step doesn't support full checksum yet, move to c step. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.697a9d74e84d.I6724874112692a04e29287cac9dad7140532557f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: use OFDM rate if IEEE80211_TX_CTL_NO_CCK_RATE is setAvraham Stern
IEEE80211_TX_CTL_NO_CCK_RATE indicates that CCK rates should not be used, but is ignored by the driver. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a322d18b5eb1.Icc46027a03f90feffb6fab49a5d82e54829d3dd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: convert TID to FW value on queue removeJohannes Berg
On queue remove, we should convert the TID value to the firmware value (8 -> 15) just like we do on queue add. Otherwise, the firmware will not be able to find the correct queue to remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configuration for SO,SOF MAC and HR RFMukesh Sisodiya
update the device configuration for HR1 device for SO and SOF device. QuZ device configuration is corrected to support specific CRF. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: add a validity check of queue_id in iwl_txq_reclaimMiri Korenblit
This function receives the queue id to reclaim packets from. Currently we're passing to it the queue id we received from the FW in the flush response. We don't do any check of this value and it might be invalid. In such case we will refer to a pointer to a queue which might be NULL. Fix this by adding a validity check of the queue id before using it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a9c3fd32bce7.I5fbdcf3b1b80eb96a907116c166f19dc0aae7cb8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm-parse: enable 160/320 MHz for AP modeJohannes Berg
Initially, 160/320 MHz in AP mode were not supported. After testing, enable the wider bandwidths in AP mode as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ed04de3a2833.Ie3991179dfaf24880b96a0904a625dbf6b8fd579@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: debug: fix crash in __iwl_err()Johannes Berg
In __iwl_err(), if we rate-limit the message away, then vaf.va is still NULL-initialized by the time we get to the tracing code, which then crashes. When it doesn't get rate-limited out, it's still wrong to reuse the old args2 that was already printed, which is why we bother making a copy in the first place. Assign vaf.va properly to fix this. Fixes: e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13sunrpc: Fix RFC6803 encryption testDavid Howells
The usage_data[] array in rfc6803_encrypt_case() is uninitialised, so clear it as it may cause the tests to fail otherwise. Fixes: b958cff6b27b ("SUNRPC: Add encryption KUnit tests for the RFC 6803 encryption types") Link: https://lore.kernel.org/r/380323.1681314997@warthog.procyon.org.uk/ Signed-off-by: David Howells <dhowells@redhat.com> cc: Chuck Lever <chuck.lever@oracle.com> cc: Scott Mayhew <smayhew@redhat.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: linux-nfs@vger.kernel.org cc: linux-crypto@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-13samples/bpf: Fix fout leak in hbm's run_bpf_progHao Zeng
Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope. Signed-off-by: Hao Zeng <zenghao@kylinos.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn
2023-04-13xsk: Elide base_addr comparison in xp_unaligned_validate_descKal Conley
Remove redundant (base_addr >= pool->addrs_cnt) comparison from the conditional. In particular, addr is computed as: addr = base_addr + offset ... where base_addr and offset are stored as 48-bit and 16-bit unsigned integers, respectively. The above sum cannot overflow u64 since base_addr has a maximum value of 0x0000ffffffffffff and offset has a maximum value of 0xffff (implying a maximum sum of 0x000100000000fffe). Since overflow is impossible, it follows that addr >= base_addr. Now if (base_addr >= pool->addrs_cnt), then clearly: addr >= base_addr >= pool->addrs_cnt Thus, (base_addr >= pool->addrs_cnt) implies (addr >= pool->addrs_cnt). Subsequently, the former comparison is unnecessary in the conditional since for any boolean expressions A and B, (A || B) && (A -> B) is equivalent to B. Signed-off-by: Kal Conley <kal.conley@dectris.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20230411130025.19704-1-kal.conley@dectris.com
2023-04-13selftests/bpf: Fix compiler warnings in bpf_testmod for kfuncsAndrii Nakryiko
Add -Wmissing-prototypes ignore in bpf_testmod.c, similarly to what we do in kernel code proper. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/oe-kbuild-all/202304080951.l14IDv3n-lkp@intel.com/ Link: https://lore.kernel.org/bpf/20230412034647.3968143-1-andrii@kernel.org
2023-04-13xsk: Simplify xp_aligned_validate_desc implementationKal Conley
Perform the chunk boundary check like the page boundary check in xp_desc_crosses_non_contig_pg(). This simplifies the implementation and reduces the number of branches. Signed-off-by: Kal Conley <kal.conley@dectris.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20230410121841.643254-1-kal.conley@dectris.com
2023-04-13x86/rtc: Remove __init for runtime functionsMatija Glavinic Pecotic
set_rtc_noop(), get_rtc_noop() are after booting, therefore their __init annotation is wrong. A crash was observed on an x86 platform where CMOS RTC is unused and disabled via device tree. set_rtc_noop() was invoked from ntp: sync_hw_clock(), although CONFIG_RTC_SYSTOHC=n, however sync_cmos_clock() doesn't honour that. Workqueue: events_power_efficient sync_hw_clock RIP: 0010:set_rtc_noop Call Trace: update_persistent_clock64 sync_hw_clock Fix this by dropping the __init annotation from set/get_rtc_noop(). Fixes: c311ed6183f4 ("x86/init: Allow DT configured systems to disable RTC at boot time") Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/59f7ceb1-446b-1d3d-0bc8-1f0ee94b1e18@nokia.com
2023-04-13selftests/bpf: Remove stand-along test_verifier_log test binaryAndrii Nakryiko
test_prog's prog_tests/verifier_log.c is superseding test_verifier_log stand-alone test. It cover same checks and adds more, and is also integrated into test_progs test runner. Just remove test_verifier_log.c. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412170655.1866831-1-andrii@kernel.org
2023-04-13selftests/bpf: Keep the loop in bpf_testmod_loop_testSong Liu
Some compilers (for example clang-15) optimize bpf_testmod_loop_test and remove the loop: gcc version (gdb) disassemble bpf_testmod_loop_test Dump of assembler code for function bpf_testmod_loop_test: 0x0000000000000570 <+0>: callq 0x575 <bpf_testmod_loop_test+5> 0x0000000000000575 <+5>: xor %eax,%eax 0x0000000000000577 <+7>: test %edi,%edi 0x0000000000000579 <+9>: jle 0x587 <bpf_testmod_loop_test+23> 0x000000000000057b <+11>: xor %edx,%edx 0x000000000000057d <+13>: add %edx,%eax 0x000000000000057f <+15>: add $0x1,%edx 0x0000000000000582 <+18>: cmp %edx,%edi 0x0000000000000584 <+20>: jne 0x57d <bpf_testmod_loop_test+13> 0x0000000000000586 <+22>: retq 0x0000000000000587 <+23>: retq clang-15 version (gdb) disassemble bpf_testmod_loop_test Dump of assembler code for function bpf_testmod_loop_test: 0x0000000000000450 <+0>: nopl 0x0(%rax,%rax,1) 0x0000000000000455 <+5>: test %edi,%edi 0x0000000000000457 <+7>: jle 0x46b <bpf_testmod_loop_test+27> 0x0000000000000459 <+9>: lea -0x1(%rdi),%eax 0x000000000000045c <+12>: lea -0x2(%rdi),%ecx 0x000000000000045f <+15>: imul %rax,%rcx 0x0000000000000463 <+19>: shr %rcx 0x0000000000000466 <+22>: lea -0x1(%rdi,%rcx,1),%eax 0x000000000000046a <+26>: retq 0x000000000000046b <+27>: xor %eax,%eax 0x000000000000046d <+29>: retq Note: The jne instruction is removed in clang-15 version. Force the compile to keep the loop by making sum volatile. Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-4-song@kernel.org
2023-04-13selftests/bpf: Fix leaked bpf_link in get_stackid_cannot_attachSong Liu
skel->links.oncpu is leaked in one case. This causes test perf_branches fails when it runs after get_stackid_cannot_attach: ./test_progs -t get_stackid_cannot_attach,perf_branches 84 get_stackid_cannot_attach:OK test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146/2 perf_branches/perf_branches_no_hw:OK 146 perf_branches:FAIL All error logs: test_perf_branches_common:PASS:test_perf_branches_load 0 nsec test_perf_branches_common:PASS:attach_perf_event 0 nsec test_perf_branches_common:PASS:set_affinity 0 nsec check_good_sample:FAIL:output not valid no valid sample from prog 146/1 perf_branches/perf_branches_hw:FAIL 146 perf_branches:FAIL Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED Fix this by adding the missing bpf_link__destroy(). Fixes: 346938e9380c ("selftests/bpf: Add get_stackid_cannot_attach") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org
2023-04-13selftests/bpf: Use read_perf_max_sample_freq() in perf_event_stackmapSong Liu
Currently, perf_event sample period in perf_event_stackmap is set too low that the test fails randomly. Fix this by using the max sample frequency, from read_perf_max_sample_freq(). Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK() with if-printf, as CHECK is not available in testing_helpers.c. Fixes: 1da4864c2b20 ("selftests/bpf: Add callchain_stackid") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org
2023-04-13Merge tag 'drm-intel-fixes-2023-04-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.3-rc7: - Fix dual link DSI for TGL+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877cugckzu.fsf@intel.com
2023-04-13selftests/bpf: Fix use of uninitialized op_name in log testsLorenz Bauer
One of the test assertions uses an uninitialized op_name, which leads to some headscratching if it fails. Use a string constant instead. Fixes: b1a7a480a112 ("selftests/bpf: Add fixed vs rotating verifier log tests") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230413094740.18041-1-lmb@isovalent.com
2023-04-13Merge branch 'net-use-read_once-write_once-for-ring-index-accesses'Paolo Abeni
Jakub Kicinski says: ==================== net: use READ_ONCE/WRITE_ONCE for ring index accesses Small follow up to the lockless ring stop/start macros. Update the doc and the drivers suggested by Eric: https://lore.kernel.org/all/CANn89iJrBGSybMX1FqrhCEMWT3Nnz2=2+aStsbbwpWzKHjk51g@mail.gmail.com/ ==================== Link: https://lore.kernel.org/r/20230412015038.674023-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13mlx4: use READ_ONCE/WRITE_ONCE for ring indexesJakub Kicinski
Eric points out that we should make sure that ring index updates are wrapped in the appropriate READ_ONCE/WRITE_ONCE macros. Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13bnxt: use READ_ONCE/WRITE_ONCE for ring indexesJakub Kicinski
Eric points out that we should make sure that ring index updates are wrapped in the appropriate READ_ONCE/WRITE_ONCE macros. Suggested-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: docs: update the sample code in driver.rstJakub Kicinski
The sample code talks about single-queue devices and uses locks. Update it to something resembling more modern code. Make sure we mention use of READ_ONCE() / WRITE_ONCE(). Change the comment which talked about consumer on the xmit side. AFAIU xmit is the producer and completions are a consumer. Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13Merge branch 'add-emac3-support-for-sa8540p-ride'Paolo Abeni
Andrew Halaney says: ==================== Add EMAC3 support for sa8540p-ride This is a forward port / upstream refactor of code delivered downstream by Qualcomm over at [0] to enable the DWMAC5 based implementation called EMAC3 on the sa8540p-ride dev board. From what I can tell with the board schematic in hand, as well as the code delivered, the main changes needed are: 1. A new address space layout for dwmac5/EMAC3 MTL/DMA regs 2. A new programming sequence required for the EMAC3 based platforms This series makes the changes above as well as other housekeeping items such as converting dt-bindings to yaml, etc. As requested[1], it has been split up by compilation deps / maintainer tree. I will post a link to the associated devicetree changes that together with this series get the hardware functioning. Patches 1-3 are clean ups of the currently supported dt-bindings and IMO could be picked up as is independent of the rest of the series to improve the current codebase. They've all been reviewed in prior versions of the series. Patches 5-7 are also clean ups of the driver and are worth picking up independently as well. They don't all have explicit reviews but should be good to go (trivial changes on non-reviewed bits). The rest of the patches have new changes, lack review, or are specificly being made to support the new hardware, so they should wait until the series as a whole is deemed ready to go by the community. ==================== Link: https://lore.kernel.org/r/20230411200409.455355-1-ahalaney@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: dwmac-qcom-ethqos: Add EMAC3 supportAndrew Halaney
Add the new programming sequence needed for EMAC3 based platforms such as the sc8280xp family. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speedsAndrew Halaney
It seems that this variable should be used for all speeds, not just 1000/100. While at it refactor it slightly to be more readable, including fixing the typo in the variable name. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delayAndrew Halaney
The driver currently sets a MAC TX delay of 2 ns no matter what the phy-mode is. If the phy-mode indicates the phy is in charge of the TX delay (rgmii-txid, rgmii-id), don't do it in the MAC. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: dwmac4: Allow platforms to specify some DMA/MTL offsetsAndrew Halaney
Some platforms have dwmac4 implementations that have a different address space layout than the default, resulting in the need to define their own DMA/MTL offsets. Extend the functions to allow a platform driver to indicate what its addresses are, overriding the defaults. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: Pass stmmac_priv in some callbacksAndrew Halaney
Passing stmmac_priv to some of the callbacks allows hwif implementations to grab some data that platforms can customize. Adjust the callbacks accordingly in preparation of such a platform customization. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: Remove some unnecessary void pointersAndrew Halaney
There's a few spots in the hardware interface where a void pointer is used, but what's passed in and later cast out is always the same type. Just use the proper type directly. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: Fix DMA typoAndrew Halaney
DAM is supposed to be DMA. Fix it to improve readability. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: stmmac: Remove unnecessary if statement bracketsAndrew Halaney
The brackets are unnecessary, remove them to match the coding style used in the kernel. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13dt-bindings: net: qcom,ethqos: Add Qualcomm sc8280xp compatiblesAndrew Halaney
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3. Add a compatible for this. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13dt-bindings: net: qcom,ethqos: Convert bindings to yamlBhupesh Sharma
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML. In doing so add a new property for iommus since newer platforms support using one, and without such make dtbs_check fails on them. While at it, also update the MAINTAINERS file to point to the yaml version of the bindings. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> [halaney: Remove duplicated properties, add MAINTAINERS and iommus] Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13dt-bindings: net: snps,dwmac: Add Qualcomm Ethernet ETHQOS compatiblesBhupesh Sharma
Add Qualcomm Ethernet ETHQOS compatible checks in snps,dwmac YAML binding document. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13dt-bindings: net: snps,dwmac: Update interrupt-namesBhupesh Sharma
As commit fc191af1bb0d ("net: stmmac: platform: Fix misleading interrupt error msg") noted, not every stmmac based platform makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts. So, update the 'interrupt-names' inside 'snps,dwmac' YAML bindings to reflect the same. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13net: enetc: workaround for unresponsive pMAC after receiving express trafficVladimir Oltean
I have observed an issue where the RX direction of the LS1028A ENETC pMAC seems unresponsive. The minimal procedure to reproduce the issue is: 1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix switch ports (0). 2. Bring the ports up (MAC Merge layer is not enabled on either end). 3. Send a large quantity of unidirectional (express) traffic from Felix to ENETC. I tried altering frame size and frame count, and it doesn't appear to be specific to either of them, but rather, to the quantity of octets received. Lowering the frame count, the minimum quantity of packets to reproduce relatively consistently seems to be around 37000 frames at 1514 octets (w/o FCS) each. 4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC ports, in both RX and TX directions, and with verification on both ends. 5. Wait for verification to complete on both sides. 6. Configure a traffic class as preemptible on both ends. 7. Send some packets again. The issue is at step 5, where the verification process of ENETC ends (meaning that Felix responds with an SMD-R and ENETC sees the response), but the verification process of Felix never ends (it remains VERIFYING). If step 3 is skipped or if ENETC receives less traffic than approximately that threshold, the test runs all the way through (verification succeeds on both ends, preemptible traffic passes fine). If, between step 4 and 5, the step below is also introduced: 4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN then again, the sequence of steps runs all the way through, and verification succeeds, even if there was the previous RX traffic injected into ENETC. Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer does not seem to influence the verification result, only received traffic does. The LS1028A manual does not mention any relationship between PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to know for now either. The bit that is toggled to work around the issue is also toggled by enetc_mac_enable(), called from phylink's mac_link_down() and mac_link_up() methods - which is how the workaround was found: verification would work after a link down/up. Fixes: c7b9e8086902 ("net: enetc: add support for MAC Merge layer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230411192645.1896048-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-13bnxt_en: Allow to set switchdev mode without existing VFsIvan Vecera
Remove an inability of bnxt_en driver to set eswitch to switchdev mode without existing VFs by: 1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so representors are created only when num_vfs > 0 otherwise just set bp->eswitch_mode 2. Do not automatically change bp->eswitch_mode during bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so the eswitch mode is managed only by an user by devlink. Just set temporarily bp->eswitch_mode to legacy to avoid re-opening of representors during destroy. 3. Create representors in bnxt_sriov_enable() if current eswitch mode is switchdev one Tested by this sequence: 1. Set PF interface up 2. Set PF's eswitch mode to switchdev 3. Created N VFs 4. Checked that N representors were created 5. Set eswitch mode to legacy 6. Checked that representors were deleted 7. Set eswitch mode back to switchdev 8. Checked that representors exist again for VFs 9. Deleted all VFs 10. Checked that all representors were deleted as well 11. Checked that current eswitch mode is still switchdev Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 19:00:37 +0000