summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-30RDMA/mlx5: Initialize QP mutex for the debug kernelsLeon Romanovsky
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and the magic field inside lock was missing. This caused to the following kernel warning for kernels build with CONFIG_DEBUG_MUTEXES. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940 Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw] CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x60e/0x940 Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89 RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028 R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002 R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610 FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? cmd_exec+0x947/0xe60 [mlx5_core] ? __mutex_lock+0x76/0x940 ? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib] __rdma_counter_bind_qp+0x6b/0xa0 [ib_core] rdma_counter_bind_qp_auto+0x363/0x520 [ib_core] _ib_modify_qp+0x316/0x580 [ib_core] ib_modify_qp_with_udata+0x19/0x30 [ib_core] modify_qp+0x4c4/0x600 [ib_uverbs] ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs] ? lock_acquire+0xb9/0x3a0 ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs] ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ksys_ioctl+0x234/0x7d0 ? exc_page_fault+0x202/0x640 ? do_syscall_64+0x1f/0x2e0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x2e0 ? asm_exc_page_fault+0x8/0x30 ? rcu_read_lock_sched_held+0x52/0x60 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/20200730082719.1582397-2-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30arm64/mm: save memory access in check_and_switch_context() fast switch pathPingfan Liu
On arm64, smp_processor_id() reads a per-cpu `cpu_number` variable, using the per-cpu offset stored in the tpidr_el1 system register. In some cases we generate a per-cpu address with a sequence like: cpu_ptr = &per_cpu(ptr, smp_processor_id()); Which potentially incurs a cache miss for both `cpu_number` and the in-memory `__per_cpu_offset` array. This can be written more optimally as: cpu_ptr = this_cpu_ptr(ptr); Which only needs the offset from tpidr_el1, and does not need to load from memory. The following two test cases show a small performance improvement measured on a 46-cpus qualcomm machine with 5.8.0-rc4 kernel. Test 1: (about 0.3% improvement) #cat b.sh make clean && make all -j138 #perf stat --repeat 10 --null --sync sh b.sh - before this patch Performance counter stats for 'sh b.sh' (10 runs): 298.62 +- 1.86 seconds time elapsed ( +- 0.62% ) - after this patch Performance counter stats for 'sh b.sh' (10 runs): 297.734 +- 0.954 seconds time elapsed ( +- 0.32% ) Test 2: (about 1.69% improvement) 'perf stat -r 10 perf bench sched messaging' Then sum the total time of 'sched/messaging' by manual. - before this patch total 0.707 sec for 10 times - after this patch totol 0.695 sec for 10 times Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Steve Capper <steve.capper@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/1594389852-19949-1-git-send-email-kernelfans@gmail.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-30irqchip/loongson-pch-pic: Fix the misused irq flow handlerHuacai Chen
Loongson PCH PIC is a standard level triggered PIC, and it need to clear interrupt during unmask. Fixes: ef8c01eb64ca6719da449dab0 ("irqchip: Add Loongson PCH PIC controller") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/1596099090-23516-6-git-send-email-chenhc@lemote.com
2020-07-30irqchip/loongson-htvec: Support 8 groups of HT vectorsHuacai Chen
The original version can only used by old Loongson-3 which only use 4 groups of HT vectors. Now Loongson-3A R4 can use 8 groups, so improve the driver to support all 8 groups. Fixes: 818e915fbac518e8c78e1877a ("irqchip: Add Loongson HyperTransport Vector support") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/1596099090-23516-5-git-send-email-chenhc@lemote.com
2020-07-30irqchip/loongson-liointc: Fix misuse of gc->mask_cacheHuacai Chen
In gc->mask_cache bits, 1 means enabled and 0 means disabled, but in the loongson-liointc driver mask_cache is misused by reverting its meaning. This patch fix the bug and update the comments as well. Fixes: dbb152267908c4b2c3639492a ("irqchip: Add driver for Loongson I/O Local Interrupt Controller") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1596099090-23516-4-git-send-email-chenhc@lemote.com
2020-07-30dt-bindings: interrupt-controller: Update Loongson HTVEC descriptionHuacai Chen
Loongson HTVEC support 8 parents interrupts in maximum, so update the maxItems description. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/1596099090-23516-2-git-send-email-chenhc@lemote.com
2020-07-30arm64: sigcontext.h: delete duplicated wordRandy Dunlap
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200726003207.20253-4-rdunlap@infradead.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-30arm64: ptrace.h: delete duplicated wordRandy Dunlap
Drop the repeated word "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200726003207.20253-3-rdunlap@infradead.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-30arm64: pgtable-hwdef.h: delete duplicated wordsRandy Dunlap
Drop the repeated words "at" and "the". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200726003207.20253-2-rdunlap@infradead.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-30x86/kvm: Use __xfer_to_guest_mode_work_pending() in kvm_run_vcpu()Thomas Gleixner
The comments explicitely explain that the work flags check and handling in kvm_run_vcpu() is done with preemption and interrupts enabled as KVM invokes the check again right before entering guest mode with interrupts disabled which guarantees that the work flags are observed and handled before VMENTER. Nevertheless the flag pending check in kvm_run_vcpu() uses the helper variant which requires interrupts to be disabled triggering an instant lockdep splat. This was caught in testing before and then not fixed up in the patch before applying. :( Use the relaxed and intentionally racy __xfer_to_guest_mode_work_pending() instead. Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function") Reported-by: Qian Cai <cai@lca.pw> writes: Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/87bljxa2sa.fsf@nanos.tec.linutronix.de
2020-07-30mac80211: remove STA txq pending airtime underflow warningFelix Fietkau
This warning can trigger if there is a mismatch between frames that were sent with the sta pointer set vs tx status frames reported for the sta address. This can happen due to race conditions on re-creating stations, or even in the case of .sta_add/remove being used instead of .sta_state, which can cause frames to be sent to a station that has not been uploaded yet. If there is an actual underflow issue, it should show up in the device airtime warning below, so it is better to remove this one. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: Fix bug in Tx ack status reporting in 802.3 xmit pathVasanthakumar Thiagarajan
Allocated ack_frame id from local->ack_status_frames is not really stored in the tx_info for 802.3 Tx path. Due to this, tx ack status is not reported and ack_frame id is not freed for the buffers requiring tx ack status. Also move the memset to 0 of tx_info before IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30cfg80211: check vendor command doit pointer before useJulian Squires
In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw. I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV. Signed-off-by: Julian Squires <julian@cipht.net> Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free pending skb when destroying a mpathRemi Pommarel
A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386f99c (mac80211: mesh: move path tables into if_mesh) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30mac80211: mesh: Free ie data when leaving meshRemi Pommarel
At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30PM / devfreq: Fix the wrong end with semicolonChanwoo Choi
Fix the wrong grammar at the end of code line by using semicolon. Cc: stable vger.kernel.org Fixes: 490a421bc575 ("PM / devfreq: Add debugfs support with devfreq_summary file") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Fix indentaion of devfreq_summary debugfs nodeChanwoo Choi
The commit 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") roll back the device name from 'devfreqX' to device name explained in DT. After applied commit 66d0e797bf09, the indentation of devfreq_summary debugfs node was broken. So, fix indentaion of devfreq_summary debugfs node as following: For example on Exynos5422-based Odroid-XU3 board, $ cat /sys/kernel/debug/devfreq/devfreq_summary dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ------------------------------ --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller null simple_ondemand 0 413000000 165000000 825000000 soc:bus_wcore null simple_ondemand 50 88700000 88700000 532000000 soc:bus_noc soc:bus_wcore passive 0 66600000 66600000 111000000 soc:bus_fsys_apb soc:bus_wcore passive 0 111000000 111000000 222000000 soc:bus_fsys soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_fsys2 soc:bus_wcore passive 0 75000000 75000000 200000000 soc:bus_mfc soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_gen soc:bus_wcore passive 0 88700000 88700000 266000000 soc:bus_peri soc:bus_wcore passive 0 66600000 66600000 66600000 soc:bus_g2d soc:bus_wcore passive 0 83250000 83250000 333000000 soc:bus_g2d_acp soc:bus_wcore passive 0 0 66500000 266000000 soc:bus_jpeg soc:bus_wcore passive 0 0 75000000 300000000 soc:bus_jpeg_apb soc:bus_wcore passive 0 0 83250000 166500000 soc:bus_disp1_fimd soc:bus_wcore passive 0 0 120000000 200000000 soc:bus_disp1 soc:bus_wcore passive 0 0 120000000 300000000 soc:bus_gscl_scaler soc:bus_wcore passive 0 0 150000000 300000000 soc:bus_mscl soc:bus_wcore passive 0 0 84000000 666000000 Cc: stable@vger.kernel.org Fixes: 66d0e797bf09 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Clean up the devfreq instance name in sysfs attrChanwoo Choi
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance name. In order to keep the consistency and to improve the readabilty, unify the instance name as 'df'. Add add the missing conditional statement to prevent the fault. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30memory: samsung: exynos5422-dmc: Add module param to control IRQ modeLukasz Luba
The driver can operate in two modes relaying on devfreq monitoring mechanism which periodically checks the device status or it can use interrupts when they are provided by loaded Device Tree. The newly introduced module parameter can be used to choose between devfreq monitoring and internal interrupts without modifying the Device Tree. It also sets devfreq monitoring as default when the parameter is not set (also the case for default when the driver is not built as a module). Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30memory: samsung: exynos5422-dmc: Adjust polling interval and uptresholdLukasz Luba
In order to react faster and make better decisions under some workloads, benchmarking the memory subsystem behavior, adjust the polling interval and upthreshold value used by the simple_ondemand governor. Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30memory: samsung: exynos5422-dmc: Use delayed timer as defaultChanwoo Choi
Use delayed timer as default instead of deferrable timer in order to monitor the DMC status regardless of CPU idle. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: Add support delayed timer for polling modeChanwoo Choi
Until now, the devfreq driver using polling mode like simple_ondemand governor have used only deferrable timer for reducing the redundant power consumption. It reduces the CPU wake-up from idle due to polling mode which check the status of Non-CPU device. But, it has a problem for Non-CPU device like DMC device with DMA operation. Some Non-CPU device need to do monitor continuously regardless of CPU state in order to decide the proper next status of Non-CPU device. So, add support the delayed timer for polling mode to support the repetitive monitoring. The devfreq driver and user can select the kind of timer on either deferrable and delayed timer. For example, change the timer type of DMC device based on Exynos5422-based Odroid-XU3 as following: - If want to use deferrable timer as following: echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer - If want to use delayed timer as following: echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandleEnric Balletbo i Serra
The Rockchip DMC (Dynamic Memory Interface) needs to access to the PMU general register files to know the DRAM type, so add a phandle to the syscon that manages these registers. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gaël PORTAY <gael.portay@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: tegra: Add Dmitry as a maintainerDmitry Osipenko
I was contributing to the NVIDIA Tegra20+ devfreq drivers recently and want to help keep them working and evolving in the future. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: event: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absentMarc Zyngier
Booting a recent kernel on a rk3399-based system (nanopc-t4), equipped with a recent u-boot and ATF results in an Oops due to a NULL pointer dereference. This turns out to be due to the rk3399-dmc driver looking for an *undocumented* property (rockchip,pmu), and happily using a NULL pointer when the property isn't there. Instead, make most of what was brought in with 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") conditioned on finding this property in the device-tree, preventing the driver from exploding. Cc: stable@vger.kernel.org Fixes: 9173c5ceb035 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-07-30irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend()Wei Yongjun
Gcc report warning as follows: drivers/irqchip/irq-imx-intmux.c:316:29: warning: variable 'irqchip_data' set but not used [-Wunused-but-set-variable] 316 | struct intmux_irqchip_data irqchip_data; | ^~~~~~~~~~~~ irqdata regs is stored to this variable on the stack in imx_intmux_runtime_suspend(), which means a nop. this commit fix to save regs to the right place. Fixes: bb403111e017 ("irqchip/imx-intmux: Implement intmux runtime power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200729155849.33919-1-weiyongjun1@huawei.com
2020-07-30mac80211: fix warning in 6 GHz IE addition in mesh modeRajkumar Manoharan
The commit 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") failed to check device capability before adding HE 6 GHz capability element. Below warning is reported in 11ac device in mesh. Fix that by checking device capability at HE 6 GHz cap IE addition in mesh beacon and association request. WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878 ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211] [ 3138.720358] Call Trace: [ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211] [ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211] [ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211] [ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211] Fixes: 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") Reported-by: Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-30ALSA: hda/realtek - Fixed HP right speaker no soundKailang Yang
HP NB right speaker had no sound output. This platform was connected to I2S Amp for speaker out.(None Realtek I2S Amp IC) EC need to check codec GPIO1 pin to initial I2S Amp. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/01285f623ac7447187482fb4a8ecaa7c@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-29soc: qcom: geni: Fix unused label warningYueHaibing
If CONFIG_SERIAL_EARLYCON is not set, gcc warns this: drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe' drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label] exit: ^~~~ Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200722020619.25988-1-yuehaibing@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-30espintcp: count packets dropped in espintcp_rcvSabrina Dubroca
Currently, espintcp_rcv drops packets silently, which makes debugging issues difficult. Count packets as either XfrmInHdrError (when the packet was too short or contained invalid data) or XfrmInError (for other issues). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-30espintcp: handle short messages instead of breaking the encap socketSabrina Dubroca
Currently, short messages (less than 4 bytes after the length header) will break the stream of messages. This is unnecessary, since we can still parse messages even if they're too short to contain any usable data. This is also bogus, as keepalive messages (a single 0xff byte), though not needed with TCP encapsulation, should be allowed. This patch changes the stream parser so that short messages are accepted and dropped in the kernel. Messages that contain a valid SPI or non-ESP header are processed as before. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Reported-by: Andrew Cagney <cagney@libreswan.org> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-29random32: remove net_rand_state from the latent entropy gcc pluginLinus Torvalds
It turns out that the plugin right now ends up being really unhappy about the change from 'static' to 'extern' storage that happened in commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity"). This is probably a trivial fix for the latent_entropy plugin, but for now, just remove net_rand_state from the list of things the plugin worries about. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Emese Revfy <re.emese@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-29PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-30selftests/bpf: Extend map-in-map selftest to detect memory leaksAndrii Nakryiko
Add test validating that all inner maps are released properly after skeleton is destroyed. To ensure determinism, trigger kernel-side synchronize_rcu() before checking map existence by their IDs. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200729040913.2815687-2-andriin@fb.com
2020-07-30bpf: Fix map leak in HASH_OF_MAPS mapAndrii Nakryiko
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update() operation. This is due to per-cpu extra_elems optimization, which bypassed free_htab_elem() logic doing proper clean ups. Make sure that inner map is put properly in optimized case as well. Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
2020-07-29ibmvnic: Fix IRQ mapping disposal in error pathThomas Falcon
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ error paths. Fix this and dispose of TX IRQ mappings correctly in case of an error. Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29soc: qcom: smd-rpm: Fix kerneldocKrzysztof Kozlowski
Fix W=1 compile warnings (invalid kerneldoc): drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm' drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-29Merge tag 'audit-pr-20200729' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fixes from Paul Moore: "One small audit fix that you can hopefully merge before v5.8 is released. Unfortunately it is a revert of a patch that went in during the v5.7 window and we just recently started to see some bug reports relating to that commit. We are working on a proper fix, but I'm not yet clear on when that will be ready and we need to fix the v5.7 kernels anyway, so in the interest of time a revert seemed like the best solution right now" * tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: revert: 1320a4052ea1 ("audit: trigger accompanying records when no rules present")
2020-07-29Merge tag '9p-for-5.8-2' of git://github.com/martinetd/linux into masterLinus Torvalds
Pull 9p fixes from Dominique Martinet: "A couple of syzcaller fixes for 5.8 The first one in particular has been quite noisy ("broke" in -rc5) so this would be worth landing even this late even if users likely won't see a difference" * tag '9p-for-5.8-2' of git://github.com/martinetd/linux: 9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work net/9p: validate fds in p9_fd_open
2020-07-29arm64: dts: meson: odroid-n2: add jack audio output supportJerome Brunet
Add support for audio on jack socket of the odroid-n2 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200701094556.194498-3-jbrunet@baylibre.com
2020-07-29arm64: dts: meson: odroid-n2: enable audio loopbackJerome Brunet
Add capture pcm interfaces and loopback routes to the odroid-n2 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200701094556.194498-2-jbrunet@baylibre.com
2020-07-29Merge branch 'mlxsw-fixes'David S. Miller
Ido Schimmel says: ==================== mlxsw fixes This patch set contains various fixes for mlxsw. Patches #1-#2 fix two trap related issues introduced in previous cycle. Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After over a week of fuzzing with the fixes, the bugs did not reproduce. Patch #6 from Amit fixes an issue in the ethtool selftest that was recently discovered after running the test on a new platform that supports only 1Gbps and 10Gbps speeds. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29selftests: ethtool: Fix test when only two speeds are supportedAmit Cohen
The test case check_highest_speed_is_chosen() configures $h1 to advertise a subset of its supported speeds and checks that $h2 chooses the highest speed from the subset. To find the common advertised speeds between $h1 and $h2, common_speeds_get() is called. Currently, the first speed returned from common_speeds_get() is removed claiming "h1 does not advertise this speed". The claim is wrong because the function is called after $h1 already advertised a subset of speeds. In case $h1 supports only two speeds, it will advertise a single speed which will be later removed because of previously mentioned bug. This results in the test needlessly failing. When more than two speeds are supported this is not an issue because the first advertised speed is the lowest one. Fix this by not removing any speed from the list of commonly advertised speeds. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: spectrum_router: Fix use-after-free in router init / de-initIdo Schimmel
Several notifiers are registered as part of router initialization. Since some of these notifiers are registered before the end of the initialization, it is possible for them to access uninitialized or freed memory when processing notifications [1]. Additionally, some of these notifiers queue work items on a workqueue. If these work items are executed after the router was de-initialized, they will access freed memory. Fix both problems by moving the registration of the notifiers to the end of the router initialization and flush the work queue after they are unregistered. [1] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline] BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61 CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 __mutex_lock_common kernel/locking/mutex.c:938 [inline] __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 1298: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074 mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932 __mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375 mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline] mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133 devlink_reload net/core/devlink.c:2959 [inline] devlink_reload+0x281/0x3b0 net/core/devlink.c:2944 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1348: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132 mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474 mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888038c3a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1760 bytes inside of 2048-byte region [ffff888038c3a000, ffff888038c3a800) The buggy address belongs to the page: page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: core: Free EMAD transactions using kfree_rcu()Ido Schimmel
The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is managed using RCU. They are freed using kfree_rcu() once the transaction ends. However, in case the transaction failed it is freed immediately after being removed from the active transactions list. This is problematic because it is still possible for a different CPU to dereference the transaction from an RCU read-side critical section while traversing the active transaction list in mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered [1]. Fix this by freeing the transaction after a grace period by calling kfree_rcu(). [1] BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881 CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline] do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:387 [inline] __irq_exit_rcu kernel/softirq.c:417 [inline] irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587 RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191 Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286 RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9 RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1 R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x473dbd Code: Bad RIP value. RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040 RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80 Allocated by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Freed by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4052 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88800b796400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 232 bytes inside of 512-byte region [ffff88800b796400, ffff88800b796600) The buggy address belongs to the page: page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: core: Increase scope of RCU read-side critical sectionIdo Schimmel
The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: spectrum: Use different trap group for externally routed packetsIdo Schimmel
Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: spectrum_router: Allow programming link-local host routesIdo Schimmel
Cited commit added the ability to program link-local prefix routes to the ASIC so that relevant packets are routed and trapped correctly. However, host routes were not included in the change and thus not programmed to the ASIC. This can result in packets being trapped via an external route trap instead of a local route trap as in IPv4. Fix this by programming all the link-local routes to the ASIC. Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29ipv4: Silence suspicious RCU usage warningIdo Schimmel
fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 22:28:46 +0000