summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-28octeontx2-pf: Fix reset_task bugsSubbaraya Sundeep
Two bugs exist in the code related to reset_task in PF driver one is the missing protection against network stack ndo_open and ndo_close. Other one is the missing cancel_work. This patch fixes those problems. Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28mlx4: disable device on shutdownJakub Kicinski
It appears that not disabling a PCI device on .shutdown may lead to a Hardware Error with particular (perhaps buggy) BIOS versions: mlx4_en: eth0: Close port called mlx4_en 0000:04:00.0: removed PHC reboot: Restarting system {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 {1}[Hardware Error]: event severity: fatal {1}[Hardware Error]: Error 0, type: fatal {1}[Hardware Error]: section_type: PCIe error {1}[Hardware Error]: port_type: 4, root port {1}[Hardware Error]: version: 1.16 {1}[Hardware Error]: command: 0x4010, status: 0x0143 {1}[Hardware Error]: device_id: 0000:00:02.2 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x04 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f06 {1}[Hardware Error]: class_code: 000604 {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000 {1}[Hardware Error]: aer_uncor_severity: 0x00062030 {1}[Hardware Error]: TLP Header: 40000018 040000ff 791f4080 00000000 [hw error repeats] Kernel panic - not syncing: Fatal hardware error! CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017 Fix the mlx4 driver. This is a very similar problem to what had been fixed in: commit 0d98ba8d70b0 ("scsi: hpsa: disable device during shutdown") to address https://bugzilla.kernel.org/show_bug.cgi?id=199779. Fixes: 2ba5fbd62b25 ("net/mlx4_core: Handle AER flow properly") Reported-by: Jake Lawrence <lawja@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28Merge branch 'rhashtable-Fix-unprotected-RCU-dereference-in-__rht_ptr'David S. Miller
Herbert Xu says: ==================== rhashtable: Fix unprotected RCU dereference in __rht_ptr This patch series fixes an unprotected dereference in __rht_ptr. The first patch is a minimal fix that does not use the correct RCU markings but is suitable for backport, and the second patch cleans up the RCU markings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28rhashtable: Restore RCU marking on rhash_lock_headHerbert Xu
This patch restores the RCU marking on bucket_table->buckets as it really does need RCU protection. Its removal had led to a fatal bug. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28rhashtable: Fix unprotected RCU dereference in __rht_ptrHerbert Xu
The rcu_dereference call in rht_ptr_rcu is completely bogus because we've already dereferenced the value in __rht_ptr and operated on it. This causes potential double readings which could be fatal. The RCU dereference must occur prior to the comparison in __rht_ptr. This patch changes the order of RCU dereference so that it is done first and the result is then fed to __rht_ptr. The RCU marking changes have been minimised using casts which will be removed in a follow-up patch. Fixes: ba6306e3f648 ("rhashtable: Remove RCU marking from...") Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623René van Dorst
Modify mtk_gmac0_rgmii_adjust() so it can always be called. mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks. Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-By: David Woodhouse <dwmw2@infradead.org> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28Merge tag 'mlx5-fixes-2020-07-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes-2020-07-28 This series introduces some fixes to mlx5 driver. v1->v2: - Drop the "Hold reference on mirred devices" patch, until Or's comments are addressed. - Imporve "Modify uplink state" patch commit message per Or's request. Please pull and let me know if there is any problem. For -Stable: For -stable v4.9 ('net/mlx5e: Fix error path of device attach') For -stable v4.15 ('net/mlx5: Verify Hardware supports requested ptp function on a given pin') For -stable v5.3 ('net/mlx5e: Modify uplink state on interface up/down') For -stable v5.4 ('net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev') ('net/mlx5: E-switch, Destroy TSAR when fail to enable the mode') For -stable v5.5 ('net/mlx5: E-switch, Destroy TSAR after reload interface') For -stable v5.7 ('net/mlx5: Fix a bug of using ptp channel index as pin index') ==================== Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28Merge branch 'net-lan78xx-fix-NULL-deref-and-memory-leak'David S. Miller
Johan Hovold says: ==================== net: lan78xx: fix NULL deref and memory leak The first two patches fix a NULL-pointer dereference at probe that can be triggered by a malicious device and a small transfer-buffer memory leak, respectively. For another subsystem I would have marked them: Cc: stable@vger.kernel.org # 4.3 The third one replaces the driver's current broken endpoint lookup helper, which could end up accepting incomplete interfaces and whose results weren't even useeren Johan ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: lan78xx: replace bogus endpoint lookupJohan Hovold
Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings. Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core. Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: lan78xx: fix transfer-buffer memory leakJohan Hovold
The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: lan78xx: add missing endpoint sanity checkJohan Hovold
Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28usb: hso: check for return value in hso_serial_common_create()Rustam Kovhaev
in case of an error tty_register_device_attr() returns ERR_PTR(), add IS_ERR() check Reported-and-tested-by: syzbot+67b2bd0e34f952d0321e@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=67b2bd0e34f952d0321e Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net/mlx5e: Fix kernel crash when setting vf VLANID on a VF devAlaa Hleihel
After the cited commit, function 'mlx5_eswitch_set_vport_vlan' started to acquire esw->state_lock. However, esw is not defined for VF devices, hence attempting to set vf VLANID on a VF dev will cause a kernel panic. Fix it by moving up the (redundant) esw validation from function '__mlx5_eswitch_set_vport_vlan' since the rest of the callers now have and use a valid esw. For example with vf device eth4: # ip link set dev eth4 vf 0 vlan 0 Trace of the panic: [ 411.409842] BUG: unable to handle page fault for address: 00000000000011b8 [ 411.449745] #PF: supervisor read access in kernel mode [ 411.452348] #PF: error_code(0x0000) - not-present page [ 411.454938] PGD 80000004189c9067 P4D 80000004189c9067 PUD 41899a067 PMD 0 [ 411.458382] Oops: 0000 [#1] SMP PTI [ 411.460268] CPU: 4 PID: 5711 Comm: ip Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 [ 411.462447] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 411.464158] RIP: 0010:__mutex_lock+0x4e/0x940 [ 411.464928] Code: fd 41 54 49 89 f4 41 52 53 89 d3 48 83 ec 70 44 8b 1d ee 03 b0 01 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 45 85 db 75 0a <48> 3b 7f 60 0f 85 7e 05 00 00 49 8d 45 68 41 56 41 b8 01 00 00 00 [ 411.467678] RSP: 0018:ffff88841fcd74b0 EFLAGS: 00010246 [ 411.468562] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 411.469715] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000001158 [ 411.470812] RBP: ffff88841fcd7550 R08: ffffffffa00fa1ce R09: 0000000000000000 [ 411.471835] R10: ffff88841fcd7570 R11: 0000000000000000 R12: 0000000000000002 [ 411.472862] R13: 0000000000001158 R14: ffffffffa00fa1ce R15: 0000000000000000 [ 411.474004] FS: 00007faee7ca6b80(0000) GS:ffff88846fc00000(0000) knlGS:0000000000000000 [ 411.475237] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.476129] CR2: 00000000000011b8 CR3: 000000041909c006 CR4: 0000000000360ea0 [ 411.477260] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 411.478340] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 411.479332] Call Trace: [ 411.479760] ? __nla_validate_parse.part.6+0x57/0x8f0 [ 411.482825] ? mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core] [ 411.483804] mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core] [ 411.484733] mlx5e_set_vf_vlan+0x41/0x50 [mlx5_core] [ 411.485545] do_setlink+0x613/0x1000 [ 411.486165] __rtnl_newlink+0x53d/0x8c0 [ 411.486791] ? mark_held_locks+0x49/0x70 [ 411.487429] ? __lock_acquire+0x8fe/0x1eb0 [ 411.488085] ? rcu_read_lock_sched_held+0x52/0x60 [ 411.488998] ? kmem_cache_alloc_trace+0x16d/0x2d0 [ 411.489759] rtnl_newlink+0x47/0x70 [ 411.490357] rtnetlink_rcv_msg+0x24e/0x450 [ 411.490978] ? netlink_deliver_tap+0x92/0x3d0 [ 411.491631] ? validate_linkmsg+0x330/0x330 [ 411.492262] netlink_rcv_skb+0x47/0x110 [ 411.492852] netlink_unicast+0x1ac/0x270 [ 411.493551] netlink_sendmsg+0x336/0x450 [ 411.494209] sock_sendmsg+0x30/0x40 [ 411.494779] ____sys_sendmsg+0x1dd/0x1f0 [ 411.495378] ? copy_msghdr_from_user+0x5c/0x90 [ 411.496082] ___sys_sendmsg+0x87/0xd0 [ 411.496683] ? lock_acquire+0xb9/0x3a0 [ 411.497322] ? lru_cache_add+0x5/0x170 [ 411.497944] ? find_held_lock+0x2d/0x90 [ 411.498568] ? handle_mm_fault+0xe46/0x18c0 [ 411.499205] ? __sys_sendmsg+0x51/0x90 [ 411.499784] __sys_sendmsg+0x51/0x90 [ 411.500341] do_syscall_64+0x59/0x2e0 [ 411.500938] ? asm_exc_page_fault+0x8/0x30 [ 411.501609] ? rcu_read_lock_sched_held+0x52/0x60 [ 411.502350] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 411.503093] RIP: 0033:0x7faee73b85a7 [ 411.503654] Code: Bad RIP value. Fixes: 0e18134f4f9f ("net/mlx5e: Eswitch, use state_lock to synchronize vlan change") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Modify uplink state on interface up/downRon Diskin
When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Query PPS pin operational status before registering itEran Ben Elisha
In a special configuration, a ConnectX6-Dx pin pps-out might be activated when driver is loaded. Fix the driver to always read the operational pin mode when registering it, and advertise it accordingly. Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Fix slab-out-of-bounds in mlx5e_rep_is_lag_netdevRaed Salem
mlx5e_rep_is_lag_netdev is used as first check as part of netdev events handler for bond device of non-uplink representors, this handler can get any netdevice under the same network namespace of mlx5e netdevice. Current code treats the netdev as mlx5e netdev and only later on verifies this, hence causes the following Kasan trace: [15402.744990] ================================================================== [15402.746942] BUG: KASAN: slab-out-of-bounds in mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core] [15402.749009] Read of size 8 at addr ffff880391f3f6b0 by task ovs-vswitchd/5347 [15402.752065] CPU: 7 PID: 5347 Comm: ovs-vswitchd Kdump: loaded Tainted: G B O --------- -t - 4.18.0-g3dcc204d291d-dirty #1 [15402.755349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [15402.757600] Call Trace: [15402.758968] dump_stack+0x71/0xab [15402.760427] print_address_description+0x6a/0x270 [15402.761969] kasan_report+0x179/0x2d0 [15402.763445] ? mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core] [15402.765121] mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core] [15402.766782] mlx5e_rep_esw_bond_netevent+0x129/0x620 [mlx5_core] Fix by deferring the violating access to be post the netdev verify check. Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Verify Hardware supports requested ptp function on a given pinEran Ben Elisha
Fix a bug where driver did not verify Hardware pin capabilities for PTP functions. Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Fix a bug of using ptp channel index as pin indexEran Ben Elisha
On PTP mlx5_ptp_enable(on=0) flow, driver mistakenly used channel index as pin index. After ptp patch marked in fixes tag was introduced, driver can freely call ptp_find_pin() as part of the .enable() callback. Fix driver mlx5_ptp_enable(on=0) flow to always use ptp_find_pin(). With that, Driver will use the correct pin index in mlx5_ptp_enable(on=0) flow. In addition, when initializing the pins, always set channel to zero. As all pins can be attached to all channels, let ptp_set_pinfunc() to move them between the channels. For stable branches, this fix to be applied only on kernels that includes both patches in fixes tag. Otherwise, mlx5_ptp_enable(on=0) will be stuck on pincfg_mux. Fixes: 62582a7ee783 ("ptp: Avoid deadlocks in the programmable pin code.") Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Fix missing cleanup of ethtool steering during rep rx cleanupMaor Dickman
The cited commit add initialization of ethtool steering during representor rx initializations without cleaning it up in representor rx cleanup, this may cause for stale ethtool flows to remain after moving back from switchdev mode to legacy mode. Fixed by calling ethtool steering cleanup during rep rx cleanup. Fixes: 6783e8b29f63 ("net/mlx5e: Init ethtool steering for representors") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5e: Fix error path of device attachAya Levin
On failure to attach the netdev, fix the rollback by re-setting the device's state back to MLX5E_STATE_DESTROYING. Failing to attach doesn't stop statistics polling via .ndo_get_stats64. In this case, although the device is not attached, it falsely continues to query the firmware for counters. Setting the device's state back to MLX5E_STATE_DESTROYING prevents the firmware counters query. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: Fix forward to next namespaceMaor Gottlieb
The steering tree is as follow (nic RX as example): --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)0| | p1 | | pn | ---------- ---------- --------- | | ---------------- --------------- |ns(e.g bypass)| |ns(e.g. lag) | ---------------- --------------- | | | ---- ---- ---- |p0| |p1| |pn| ---- ---- ---- | ---- |FT| ---- find_next_chained_ft(prio) returns the first flow table in the next priority. If prio is a parent of a flow table then it returns the first flow table in the next priority in the same namespace, else if prio is parent of namespace, then it should return the first flow table in the next namespace. Currently if the user requests to forward to next namespace, the code calls to find_next_chained_ft with the prio of the next namespace and not the prio of the namesapce itself. Fixes: 9254f8ed15b6 ("net/mlx5: Add support in forward to namespace") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: E-switch, Destroy TSAR after reload interfaceParav Pandit
When eswitch offloads is enabled, TSAR is created before reloading the interfaces. However when eswitch offloads mode is disabled, TSAR is disabled before reloading the interfaces. To keep the eswitch enable/disable sequence as mirror, destroy TSAR after reloading the interfaces. Fixes: 1bd27b11c1df ("net/mlx5: Introduce E-switch QoS management") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28net/mlx5: E-switch, Destroy TSAR when fail to enable the modeParav Pandit
When either esw_legacy_enable() or esw_offloads_enable() fails, code missed to destroy the created TSAR. Hence, add the missing call to destroy the TSAR. Fixes: 610090ebce92 ("net/mlx5: E-switch, Initialize TSAR Qos hardware block before its user vports") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-28Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some bugfixes for the HNS3 ethernet driver. patch#1 fixes a desc filling bug, patch#2 fixes a false TX timeout issue, and patch#3~#5 fixes some bugs related to VLAN and FD. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix for VLAN config when reset failedGuojia Liao
When device is resetting or reset failed, firmware is unable to handle mailbox. VLAN should not be configured in this case. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix aRFS FD rules leftover after add a user FD ruleGuojia Liao
When user had created a FD rule, all the aRFS rules should be clear up. HNS3 process flow as below: 1.get spin lock of fd_ruls_list 2.clear up all aRFS rules 3.release lock 4.get spin lock of fd_ruls_list 5.creat a rules 6.release lock; There is a short period of time between step 3 and step 4, which would creatting some new aRFS FD rules if driver was receiving packet. So refactor the fd_rule_lock to fix it. Fixes: 441228875706 ("net: hns3: refine the flow director handle") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: add reset check for VF updating port based VLANJian Shen
Currently hclgevf_update_port_base_vlan_info() may be called when VF is resetting, which may cause hns3_nic_net_open() being called twice unexpectedly. So fix it by adding a reset check for it, and extend critical region for rntl_lock in hclgevf_update_port_base_vlan_info(). Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix a TX timeout issueYonglong Liu
When the queue depth and queue parameters are modified, there is a low probability that TX timeout occurs. The two operations cause the link to be down or up when the watchdog is still working. All queues are stopped when the link is down. After the carrier is on, all queues are woken up. If the watchdog detects the link between the carrier on and wakeup queues, a false TX timeout occurs. So fix this issue by modifying the sequence of carrier on and queue wakeup, which is symmetrical to the link down action. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: hns3: fix desc filling bug when skb is expanded or linearedYunsheng Lin
The linear and frag data part may be changed when the skb is expanded or lineared in skb_cow_head() or skb_checksum_help(), which is called by hns3_fill_skb_desc(), so the linear len return by skb_headlen() before the calling of hns3_fill_skb_desc() is unreliable. Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix this bug. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28ARM: socfpga: PM: add missing put_device() call in ↵Yu Kuai
socfpga_setup_ocram_self_refresh() if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 44fd8c7d4005 ("ARM: socfpga: support suspend to ram") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-28Merge tag 'asm-generic-fixes-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic into master Pull asm-generic bugfix from Arnd Bergmann: "A single bugfix for a regression introduced through a typo in the v5.8 merge window, leading to incorrect data returned from inl() on some architectures" * tag 'asm-generic-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: Fix return type of _inb and _inl
2020-07-28Merge tag 'arm-fixes-5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master Pull ARM SoC DT fixes from Arnd Bergmann: "These are the latest device tree fixes for Arm SoCs: - TI Keystone2 ethernet regressed after a driver change broke with incorrect phy-mode in a board's DT source. - A similar fix is needed for two i.MX boards that were missed in an earlier bugfix. - DT change for Armada 38x allowing to add the register needed to fix NETA lockup when repeatedly switching speed. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. - Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6" * tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range
2020-07-28parisc: Do not use an ordered store in pa_tlb_lock()John David Anglin
No need to use an ordered store in pa_tlb_lock() and update the comment regarng usage of the sid register to unlocak a spinlock in tlb_unlock0(). Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.0+
2020-07-28Revert "parisc: Revert "Release spinlocks using ordered store""Helge Deller
This reverts commit 86d4d068df573a8c2105554624796c086d6bec3d. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.0+
2020-07-28Revert "parisc: Use ldcw instruction for SMP spinlock release barrier"Helge Deller
This reverts commit 9e5c602186a692a7e848c0da17aed40f49d30519. No need to use the ldcw instruction as SMP spinlock release barrier. Revert it to gain back speed again. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.2+
2020-07-28Revert "parisc: Drop LDCW barrier in CAS code when running UP"Helge Deller
This reverts commit e6eb5fe9123f05dcbf339ae5c0b6d32fcc0685d5. We need to optimize it differently. A follow up patch will correct it. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.2+
2020-07-28Revert "parisc: Improve interrupt handling in arch_spin_lock_flags()"Helge Deller
This reverts commit 2772f0efd5bbd5413db3d22e363b779ca0fa5310. It turns out that we want to implement the spinlock code differently. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.7+
2020-07-28i2c: slave: add sanity check when unregisteringWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28i2c: slave: improve sanity check when registeringWolfram Sang
Add check for ERR_PTR and simplify code while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-28spi: rockchip: Fix error in SPI slave pio readJon Lin
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it. Fixes: 01b59ce5dac8 ("spi: rockchip: use irq rather than polling") Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Support 64-location deep FIFOsJon Lin
The FIFO depth of SPI V2 is 64 instead of 32, add support for it. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-2-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: rockchip: Config spi rx dma burst size depend on xfer lengthJon Lin
The burst length can be adjusted according to the transmission length to improve the transmission rate Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20200723004356.6390-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spi-topcliff-pch: drop call to wakeup-disableVaibhav Gupta
Before generic upgrade, both .suspend() and .resume() were invoking pci_enable_wake(pci_dev, PCI_D3hot, 0). Hence, disabling wakeup in both states. (Normal trend is .suspend() enables and .resume() disables the wakeup.) This was ambiguous and may be buggy. Instead of replicating the legacy behavior, drop the wakeup-disable call. Fixes: f185bcc77980 ("spi: spi-topcliff-pch: use generic power management") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200727172936.661567-1-vaibhavgupta40@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28spi: spidev: Align buffers for DMAChristian Eggers
Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28block: Remove callback typedefs for blk_mq_opsDaniel Wagner
No need to define typedefs for the callbacks, because there is not a single user except blk_mq_ops. Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28regulator: cros-ec-regulator: Fix double free of desc->name.Pi-Hsun Shih
The desc->name field is allocated with devm_kstrdup, but is also kfreed on the error path, causing it to be double freed. Remove the kfree on the error path. Fixes: 8d9f8d57e023 ("regulator: Add driver for cros-ec-regulator") Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200728091909.2009771-1-pihsun@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-28block: Use non _rcu version of list functions for tag_set_listDaniel Wagner
tag_set_list is only accessed under the tag_set_lock lock. There is no need for using the _rcu list functions. The _rcu list function were introduced to allow read access to the tag_set_list protected under RCU, see 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") and 05b79413946d ("Revert "blk-mq: don't handle TAG_SHARED in restart""). Those changes got reverted later but the cleanup commit missed a couple of places to undo the changes. Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()" Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-28memory: jz4780_nemc: Only request IO memory the driver will usePaul Cercueil
The driver only uses the registers up to offset 0x54. Since the EFUSE registers are in the middle of the NEMC registers, we only request the registers we will use for now - that way the EFUSE driver can probe too. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/20200728152629.28878-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-28bus: fsl-mc: Add ACPI support for fsl-mcMakarand Pawagi
Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table to extract memory and other resources. Interrupt (GIC ITS) information is extracted from the MADT table by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c. IORT table is parsed to configure DMA. Signed-off-by: Makarand Pawagi <makarand.pawagi@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200619082013.13661-13-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-28bus/fsl-mc: Refactor the MSI domain creation in the DPRC driverDiana Craciun
The DPRC driver is not taking into account the msi-map property and assumes that the icid is the same as the stream ID. Although this assumption is correct, generalize the code to include a translation between icid and streamID. Furthermore do not just copy the MSI domain from parent (for child containers), but use the information provided by the msi-map property. If the msi-map property is missing from the device tree retain the old behaviour for backward compatibility ie the child DPRC objects inherit the MSI domain from the parent. Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200619082013.13661-12-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit (git 2.34.1) at 2025-09-12 13:41:41 +0000