summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-08cgroup: implement cgroup_subsys->css_reset()Tejun Heo
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". The previous patches added support for explicitly and implicitly enabled subsystems and showing/hiding their interface files. An explicitly enabled subsystem may become implicitly enabled if it's turned off through "cgroup.subtree_control" but there are subsystems depending on it. In such cases, the subsystem, as it's turned off when seen from userland, shouldn't enforce any resource control. Also, the subsystem may be explicitly turned on later again and its interface files should be as close to the intial state as possible. This patch adds cgroup_subsys->css_reset() which is invoked when a css is hidden. The callback should disable resource control and reset the state to the vanilla state. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08cgroup: make interface files visible iff enabled on cgroup->subtree_controlTejun Heo
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". The preceding patch distinguished cgroup->subtree_control and ->child_subsys_mask where the former is the subsystems explicitly configured by the userland and the latter is all enabled subsystems currently is equal to the former but will include subsystems implicitly enabled through dependency. Subsystems which are enabled due to dependency shouldn't be visible to userland. This patch updates cgroup_subtree_control_write() and create_css() such that interface files are not created for implicitly enabled subsytems. * @visible paramter is added to create_css(). Interface files are created only when true. * If an already implicitly enabled subsystem is turned on through "cgroup.subtree_control", the existing css should be used. css draining is skipped. * cgroup_subtree_control_write() computes the new target cgroup->child_subsys_mask and create/kill or show/hide csses accordingly. As the two subsystem masks are still kept identical, this patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08cgroup: introduce cgroup->subtree_controlTejun Heo
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". Previously, cgroup->child_subsys_mask directly reflected "cgroup.subtree_control" and the enabled subsystems in the child cgroups. This patch adds cgroup->subtree_control which "cgroup.subtree_control" operates on. cgroup->child_subsys_mask is now calculated from cgroup->subtree_control by cgroup_refresh_child_subsys_mask(), which sets it identical to cgroup->subtree_control for now. This will allow using cgroup->child_subsys_mask for all the enabled subsystems including the implicit ones and ->subtree_control for tracking the explicitly requested ones. This patch keeps the two masks identical and doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08cgroup: reorganize cgroup_subtree_control_write()Tejun Heo
Make the following two reorganizations to cgroup_subtree_control_write(). These are to prepare for future changes and shouldn't cause any functional difference. * Move availability above css offlining wait. * Move cgrp->child_subsys_mask update above new css creation. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2014-07-08irqchip: gic: Move some bits of GICv2 to a library-type fileMarc Zyngier
A few GICv2 low-level function are actually very useful to GICv3, and it makes some sense to share them across the two drivers. They end-up in their own file, with an additional parameter used to ensure an optional synchronization (unused on GICv2). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08scripts: Teach get_maintainer.pl about the new "R:" tagJoe Perches
We can now designate reviewers in the MAINTAINERS file with the new "R:" tag, so this commit teaches get_maintainers.pl to add their email addresses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-07-08MAINTAINERS: change IEEE 802.15.4 maintainerAlexander Aring
This patch changes the IEEE 802.15.4 subsystem maintainer to Alexander Aring. We discussed this change before via e-mail and I collected the acks from the current maintainers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Alexander Smirnov <alex.bluesman.sminov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08rcu: Update rcu torture maintainership filename patternsJoe Perches
Commit 51b1130eb582 ("rcutorture: Abstract rcu_torture_random()") moved the file, so this commit updates the patterns. Signed-off-by: Joe Perches <joe@perches.com> cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-07-08rcu: Update RCU maintainershipPaul E. McKenney
Drop Dipankar Sarma at his request (https://lkml.org/lkml/2014/6/2/628), add Josh Triplett based on long-term review, contributions, and agreement to take on this role (https://lkml.org/lkml/2014/6/2/554). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-07-08iio: ti_am335x_adc: Fix: Use same step id at FIFOs both endsJan Kardell
Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org
2014-07-08Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix a number of zero-day bugs, mostly found with module test scripts. Nothing major, but potentially annoying and worthwhile to fix" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adc128d818) Drop write support on inX_input attributes hwmon: (emc2103) Clamp limits instead of bailing out hwmon: (adm1031) Fix writes to limit registers hwmon: (adm1021) Fix cache problem when writing temperature limits hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div hwmon: (amc6821) Fix permissions for temp2_input hwmon: (ntc_thermistor) Correct information printed during probe
2014-07-08perf trace: Fix build on 32-bit systemsArnaldo Carvalho de Melo
CC /tmp/build/perf/builtin-trace.o builtin-trace.c: In function 'print_location': builtin-trace.c:1792:4: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'u64' [-Werror=format] builtin-trace.c:1794:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format] builtin-trace.c:1796:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format] cc1: all warnings being treated as errors make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [install-bin] Error 2 make: Leaving directory `/home/acme/git/linux/tools/perf' acme@linux-goap:~/git/linux> uname -a Linux linux-goap 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-843p3aqbw531eqiu2hah8o9p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08nfs: only show Posix ACLs in listxattr if actually presentChristoph Hellwig
The big ACL switched nfs to use generic_listxattr, which calls all existing ->list handlers. Add a custom .listxattr implementation that only lists the ACLs if they actually are present on the given inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Philippe Troin <phil@fifi.org> Tested-by: Philippe Troin <phil@fifi.org> Fixes: 013cdf1088d7 (nfs: use generic posix ACL infrastructure ...) Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-07-08perf trace: Add pagefault statisticsStanislav Fomichev
'perf trace' can show summary of events using -S option. This commit also reports number of major/minor pagefault events in this summary. $ perf trace -s --pf all -- sleep 1 Summary of events: sleep (18604), 275 events, 99.6%, 197 minfaults, 0.000 msec syscall calls min avg max stddev (msec) (msec) (msec) (%) --------------- -------- --------- --------- --------- ------ read 2 0.000 0.001 0.002 100.00% open 3 0.004 0.005 0.007 21.13% close 3 0.001 0.001 0.001 1.37% fstat 3 0.001 0.002 0.002 10.66% mmap 8 0.002 0.004 0.006 10.69% mprotect 4 0.003 0.005 0.008 24.68% munmap 1 0.005 0.005 0.005 0.00% brk 3 0.001 0.002 0.003 28.08% access 3 0.002 0.003 0.005 24.48% nanosleep 1 1000.747 1000.747 1000.747 0.00% execve 8 0.000 0.033 0.246 91.00% arch_prctl 1 0.001 0.001 0.001 0.00% Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1404842716-19190-1-git-send-email-stfomichev@yandex-team.ru Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08Merge branch 'xen-netfront'David S. Miller
David Vrabel says: ==================== xen-netfront: multi-queue related locking fixes Two fixes to the per-queue locking bugs in xen-netfront that were introduced in 3.16-rc1 with the multi-queue support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08xen-netfront: call netif_carrier_off() only once when disconnectingDavid Vrabel
In xennet_disconnect_backend(), netif_carrier_off() was called once per queue when it needs to only be called once. The queue locking around the netif_carrier_off() call looked very odd. I think they were supposed to synchronize any NAPI instances with the expectation that no further NAPI instances would be scheduled because of the carrier being off (see the check in xennet_rx_interrupt()). But I can't easily tell if this works correctly. Instead, add a napi_synchronize() call after disabling the interrupts. This is obviously correct as with no Rx interrupts, no further NAPI instances will be scheduled. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08xen-netfront: don't nest queue locks in xennet_connect()David Vrabel
The nesting of the per-queue rx_lock and tx_lock in xennet_connect() is confusing to both humans and lockdep. The locking is safe because this is the only place where the locks are nested in this way but lockdep still warns. Instead of adding the missing lockdep annotations, refactor the locking to avoid the confusing nesting. This is still safe, because the xenbus connection state changes are all serialized by the xenwatch thread. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08arm64: implement TASK_SIZE_OFColin Cross
include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Cc: stable@vger.kernel.org Signed-off-by: Colin Cross <ccross@android.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-08arm64: export __cpu_{clear,copy}_user_page functionsMark Salter
The __cpu_clear_user_page() and __cpu_copy_user_page() functions are not currently exported. This prevents modules from using clear_user_page() and copy_user_page(). Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-08ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO ↵Suman Tripathi
mode command. This patch fixes the dma state machine lockup due to the processing of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller has an errata in which it cannot clear the BSY bit after the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate state and locks up. This patch also removes the dma restart workaround from the read_id function as the read_id function is only called by libata layer for ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER and udev, the framework will enumerate using SCSI commands and it will not call read_id function. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08libahci: export ahci_qc_issue() and ahci_start_fix_rx()Suman Tripathi
The subsequent patch will make use of them. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08perf tools: Suggest using -f to override perf.data file ownership messageArnaldo Carvalho de Melo
# id uid=0(root) gid=0(root) groups=0(root) # ls -la perf.data -rw-------. 1 acme acme 20720 Jul 8 11:35 perf.data Previously: # perf report file perf.data not owned by current user or root Now: # perf report File perf.data not owned by current user or root (use -f to override) Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-0j2wuuegnhv3gljbil8ld6kx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08documentation: Add pointer to percpu-ref for RCU and refcountPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2014-07-08documentation: Add acquire/release barriers to pairing rulesPaul E. McKenney
It is possible to pair acquire and release barriers with other barriers, so this commit adds them to the list in the SMP barrier pairing section. Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> [ paulmck: Updated pairing discussion as suggested by Peter Zijlstra. ]
2014-07-08documentation: Update reference, kerneltrap.org no longer worksPranith Kumar
The kerneltrap.org site no longer works, so this commit updates it to a working reference, namely gmane. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-07-08documentation: Clarify wake-up/memory-barrier relationshipPaul E. McKenney
This commit adds an example demonstrating that if a wake_up() doesn't actually wake something up, no memory ordering is provided. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2014-07-08ARM: mvebu: Fix coherency bus notifiers by using separate notifiersEzequiel Garcia
Currently, the coherency fabric support registers two bus notifiers; one for platform, one for pci bus types, with the same notifier block. However, this is illegal and can cause serious issues: the notifier block is also a link in the notifier list and cannot be inserted twice. This commit fixes this by using different notifier blocks (with the same notifier callback) to set the platform and pci bus types notifiers. Fixes: b0063aad5dd8 ("ARM: mvebu: use hardware I/O coherency also for PCI devices") Reported-by: Paolo Pisati <p.pisati@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1404826657-6977-1-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08crypto: drbg - HMAC-SHA1 DRBG has crypto strength of 128 bitsStephan Mueller
The patch corrects the security strength of the HMAC-SHA1 DRBG to 128 bits. This strength defines the size of the seed required for the DRBG. Thus, the patch lowers the seeding requirement from 256 bits to 128 bits for HMAC-SHA1. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: drbg - Mix a time stamp into DRBG stateStephan Mueller
The current locking approach of the DRBG tries to keep the protected code paths very minimal. It is therefore possible that two threads query one DRBG instance at the same time. When thread A requests random numbers, a shadow copy of the DRBG state is created upon which the request for A is processed. After finishing the state for A's request is merged back into the DRBG state. If now thread B requests random numbers from the same DRBG after the request for thread A is received, but before A's shadow state is merged back, the random numbers for B will be identical to the ones for A. Please note that the time window is very small for this scenario. To prevent that there is even a theoretical chance for thread A and B having the same DRBG state, the current time stamp is provided as additional information string for each new request. The addition of the time stamp as additional information string implies that now all generate functions must be capable to process a linked list with additional information strings instead of a scalar. CC: Rafael Aquini <aquini@redhat.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: drbg - Select correct DRBG core for stdrngStephan Mueller
When the DRBG is initialized, the core is looked up using the DRBG name. The name that can be used for the lookup is registered in cra_driver_name. The cra_name value contains stdrng. Thus, the lookup code must use crypto_tfm_alg_driver_name to obtain the precise DRBG name and select the correct DRBG. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: drbg - Call CTR DRBG DF function only onceStephan Mueller
The CTR DRBG requires the update function to be called twice when generating a random number. In both cases, update function must process the additional information string by using the DF function. As the DF produces the same result in both cases, we can save one invocation of the DF function when the first DF function result is reused. The result of the DF function is stored in the scratchpad storage. The patch ensures that the scratchpad is not cleared when we want to reuse the DF result. For achieving this, the CTR DRBG update function must know by whom and in which scenario it is called. This information is provided with the reseed parameter to the update function. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: drbg - Fix format string for debugging statementsStephan Mueller
The initial format strings caused warnings on several architectures. The updated format strings now match the variable types. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> CC: Joe Perches <joe@perches.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: drbg - cleanup of preprocessor macrosStephan Mueller
The structure used to construct the module description line was marked problematic by the sparse code analysis tool. The module line description now does not contain any ifdefs to prevent error reports from sparse. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: qce - add dependancy to KconfigStanimir Varbanov
Make qce crypto driver depend on ARCH_QCOM and make possible to test driver compilation. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: qce - fix sparse warningsStanimir Varbanov
Fix few sparse warnings of type: - sparse: incorrect type in argument - sparse: incorrect type in initializer Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: caam - Enabling multiple caam debug support for C29x platformNitesh Narayan Lal
In the current setup debug file system enables us to debug the operational details for only one CAAM. This patch adds the support for debugging multiple CAAM's. Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Signed-off-by: Vakul Garg <b16394@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08crypto: dts - Addition of missing SEC compatibile property in c29x device treeNitesh Narayan Lal
The driver is compatible with SEC version 4.0, which was missing from device tree resulting that the caam driver doesn't gets probed. Since SEC is backward compatible with older versions, so this patch adds those missing versions in c29x device tree. Signed-off-by: Nitesh Narayan Lal <b44382@freescale.com> Signed-off-by: Vakul Garg <b16394@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-08Merge tag 'tegra-clk-3.17-1' of ↵Mike Turquette
git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next-tegra tegra clk updates for 3.17 including PLLE fixes for xusb
2014-07-08ARM: mvebu: Fix the operand list in the inline asm of ↵Gregory CLEMENT
armada_370_xp_pmsu_idle_enter In the inline asm part of the function armada_370_xp_pmsu_idle_enter() the input operand was used. The intent here was to let the compiler choose this register so it could do the optimization it needed. However an input operand is not supposed to be modified by the inline asm code. This can lead to improper generated instructions. In some case generated instruction the compiler made the choice to reuse the same register to store the return value. But in the assembly part this register was modified, so it can lead to return an wrong value. The fix is to use a clobber. Thanks to this the compiler will know that the value of this register will be modified. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1404483736-16938-1-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-08block: don't assume last put of shared tags is for the hostChristoph Hellwig
There is no inherent reason why the last put of a tag structure must be the one for the Scsi_Host, as device model objects can be held for arbitrary periods. Merge blk_free_tags and __blk_free_tags into a single funtion that just release a references and get rid of the BUG() when the host reference wasn't the last. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-08Merge tag 'signed-for-3.16' of git://github.com/agraf/linux-2.6 into kvm-masterPaolo Bonzini
Patch queue for 3.16 - 2014-07-08 A few bug fixes to make 3.16 work well with KVM on PowerPC: - Fix ppc32 module builds - Fix Little Endian hosts - Fix Book3S HV HPTE lookup with huge pages in guest - Fix BookE lock leak
2014-07-08ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hdaAaron Plattner
Vendor ID 0x10de0070 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-08alarmtimer: Fix bug where relative alarm timers were treated as absoluteJohn Stultz
Sharvil noticed with the posix timer_settime interface, using the CLOCK_REALTIME_ALARM or CLOCK_BOOTTIME_ALARM clockid, if the users tried to specify a relative time timer, it would incorrectly be treated as absolute regardless of the state of the flags argument. This patch corrects this, properly checking the absolute/relative flag, as well as adds further error checking that no invalid flag bits are set. Reported-by: Sharvil Nanavati <sharvil@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Cc: stable <stable@vger.kernel.org> #3.0+ Link: http://lkml.kernel.org/r/1404767171-6902-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-07-08clk: tegra: Use XUSB-compatible SATA PLL sequenceMikko Perttunen
Use a sequence for enabling hardware control of the SATA PLL that works both when using the SATA lane with SATA and when using it with XUSB. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
2014-07-08ARM: OMAP2+: Remove non working OMAP HDMI audio initializationJyri Sarha
This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-08KVM: x86: Check for nested events if there is an injectable interruptBandan Das
With commit b6b8a1451fc40412c57d1 that introduced vmx_check_nested_events, checks for injectable interrupts happen at different points in time for L1 and L2 that could potentially cause a race. The regression occurs because KVM_REQ_EVENT is always set when nested_run_pending is set even if there's no pending interrupt. Consequently, there could be a small window when check_nested_events returns without exiting to L1, but an interrupt comes through soon after and it incorrectly, gets injected to L2 by inject_pending_event Fix this by adding a call to check for nested events too when a check for injectable interrupt returns true Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-08Merge tag 'for-v3.16-rc/omap-fixes-b' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/fixes Some miscellaneous fixes for OMAP clock code, DRA7xx device data, and PRCM code (when DSPBridge is used) for v3.16-rc. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/prcm-a-v3.16-rc/20140706174258/
2014-07-07tcp: fix false undo corner casesYuchung Cheng
The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07net/mlx4_en: Don't configure the HW vxlan parser when vxlan offloading isn't setOr Gerlitz
The add_vxlan_port ndo driver code was wrongly testing whether HW vxlan offloads are supported by the device instead of checking if they are currently enabled. This causes the driver to configure the HW parser to conduct matching for vxlan packets but since no steering rules were set, vxlan packets are dropped on RX. Fix that by doing the right test, as done in the del_vxlan_port ndo handler. Fixes: 1b136de ('net/mlx4: Implement vxlan ndo calls') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07igmp: fix the problem when mc leave groupdingtianhong
The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 07:33:18 +0000