summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-04ASoC: imx-sgtl5000: return E_PROBE_DEFER if ssi/codec not foundArnaud Patard (Rtp)
If the ssi or codec drivers are not loaded (for instance, because spi or i2c bus drivers are not loaded), returning -EINVAL will for people to unload and then reload the module to get sound working. Returning E_PROBE_DEFER will mitigate this. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04Merge branches 'for-3.11/wacom-fixed' and 'for-3.11/wiimote' into for-linusJiri Kosina
2013-07-04HID: wacom: Intuos4 battery charging changesPrzemo Firszt
Intuos4 WL is separately reporting power supply and battery charging status - now hid-wacom is using that information. Previously hid-wacom was wrongly treating "battery charging" bit as "power supply connected". Now it should report battery charging, battery discharging, battery full and power supply status. Intuos4 WL sends reports when is in use (obvious) and when unplugging power supply. If means that if the device is being charged, but it's not being used it will never report "battery full". The same problem happens after the device has been connected, but it's not in use - the battery/ac status will be incorrect. Currently there is no mechanism to ask the device to send a report containing battery/ac status. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-04Merge branches 'for-3.11/multitouch', 'for-3.11/sony' and ↵Jiri Kosina
'for-3.11/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2013-07-04Merge branches 'for-3.11/battery', 'for-3.11/elo', 'for-3.11/holtek' and ↵Jiri Kosina
'for-3.11/i2c-hid-fixed' into for-linus
2013-07-04HID: i2c-hid: support sending HID output reports using the output registerAndrew Duggan
The current i2c hid driver does not support sending HID output reports using the output register for devices which support receiving reports through this method. This patch determines which method to use to send output reports based on the value of wMaxOutputLength in the device's HID descriptor. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-04ASoC: Samsung: Remove redundant commentSachin Kamat
There is a typo in the filename (i2c mentioned instead of i2s). However, this is a redundant piece of information. Delete it altogether. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04KVM: VMX: mark unusable segment as nonpresentGleb Natapov
Some userspaces do not preserve unusable property. Since usable segment has to be present according to VMX spec we can use present property to amend userspace bug by making unusable segment always nonpresent. vmx_segment_access_rights() already marks nonpresent segment as unusable. Cc: stable@vger.kernel.org # 3.9+ Reported-by: Stefan Pietsch <stefan.pietsch@lsexperts.de> Tested-by: Stefan Pietsch <stefan.pietsch@lsexperts.de> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04arm64: KVM: Kconfig integrationMarc Zyngier
Finally plug KVM/arm64 into the config system, making it possible to enable KVM support on AArch64 CPUs. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB supportTom Rini
As this config must support boards which cannot support separate device trees, enable support for appended ones. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfigJoel Fernandes
Build EDMA in by default to avoid fewer people stepping on their toes with broken DMA on drivers needing EDMA. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by defaultEduardo Valentin
Make DRA752 thermal support enabled on omap2plus_defconfig Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driverEduardo Valentin
Enable the bandgap driver for TI SoCs thermal support. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: devices: remove duplicated include from devices.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.Enric Balletbo i Serra
Platform code used to depend on bootloadres for correctly setting the mux pin modes. But bootloaders should only set the minimum required mux pins. So, DSS mux pins are not set in U-Boot anymore and video display is broken on IGEPv2 when booting with newer U-Boot versions. Setup the DSS pin muxes to enable display functionality. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabledPavel Machek
We still need video & sound drivers with device tree enabled. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"Thomas Meyer
Cocci spatch "ptr_ret.spatch" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: Remove obsolete Makefile linePaul Bolle
The OMAP runtime PM implementation was removed in v3.0. But one Makefile line, which was used to tweak CFLAGS, was overlooked. Remove it too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP5: Enable Cortex A15 errata 798181Santosh Shilimkar
ARM errata 798181 is applicable for OMAP5 based devices. So enable the same in the build. Errata extract and workaround information is as below. On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not adequately shooting down all use of the old entries. The ARM_ERRATA_798181 option enables the Linux kernel workaround for this erratum which sends an IPI to the CPUs that are running the same ASID as the one being invalidated. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: scu: provide inline dummy functions when SCU is not presentNishanth Menon
On platforms such as Cortex-A15 based OMAP5, SCU is not used, however since much code is shared between Cortex-A9 based OMAP4 (which uses SCU) and OMAP5, It does help to have inline functions returning error values when SCU is not present on the platform. arch/arm/mach-omap2/omap-smp.c which is common between OMAP4 and 5 handles the SCU usage only for OMAP4. This fixes the following build failure with OMAP5 only build: arch/arm/mach-omap2/built-in.o: In function `omap4_smp_init_cpus': arch/arm/mach-omap2/omap-smp.c:185: undefined reference to `scu_get_core_count' arch/arm/mach-omap2/built-in.o: In function `omap4_smp_prepare_cpus': arch/arm/mach-omap2/omap-smp.c:211: undefined reference to `scu_enable' Reported-by: Pekon Gupta <pekon@ti.com> Reported-by: Vincent Stehlé <v-stehle@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4Nishanth Menon
CPU sleep and resume functions for Cortex-A9 based OMAP4 and Cortex-A15 based OMAP5 are different. Hence, even though we reuse most of the remaining file as part of OMAP4/5 consolidation, build OMAP4 specific sleep/resume operations only for OMAP4. SCU is not used OMAP5. This fixes the following build failure with OMAP5 only build: arch/arm/mach-omap2/built-in.o: In function `scu_gp_set': arch/arm/mach-omap2/sleep44xx.S:132: undefined reference to `scu_power_mode' arch/arm/mach-omap2/built-in.o: In function `scu_gp_clear': arch/arm/mach-omap2/sleep44xx.S:229: undefined reference to `scu_power_mode' Reported-by: Pekon Gupta <pekon@ti.com> Reported-by: Vincent Stehlé <v-stehle@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04xen/arm and xen/arm64: implement HYPERVISOR_tmem_opStefano Stabellini
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-04ACPI / fan: Initialize acpi_state variableNaresh Bhat
Make the following compiler warning go away: CC drivers/acpi/fan.o drivers/acpi/fan.c: In function ‘fan_get_cur_state’: drivers/acpi/fan.c:96:9: warning: ‘acpi_state’ may be used uninitialized in this function [-Wuninitialized] by initializing the local variable acpi_state in fan_get_cur_state(). [rjw: Changelog] Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-04ACPI / scan: remove unused LIST_HEAD(acpi_device_list)Haicheng Li
The acpi_device_list list is not used, so removed it. [rjw: Changelog] Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-04ACPI / dock: Actually define acpi_dock_init() as voidRafael J. Wysocki
Commit 94add0f (ACPI / dock: Initialize ACPI dock subsystem upfront) changed the header of acpi_dock_init() in internal.h so that it is supposed to be a void function now, but it forgot to update its actual definition in dock.c according to which it still is supposed to return int. Although that didn't cause any visible breakage or even a compiler warning to be thrown, which is odd enough, fix it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.10+ <stable@vger.kernel.org>
2013-07-04ARM: OMAP2+: timer: initialize before using oh_nameAfzal Mohammed
of_property_read_string_index(...,&oh_name) in omap_dm_timer_init_one does not alter the value of 'oh_name' even if the relevant function fails and as 'oh_name' in stack may have a non-zero value, it would be misunderstood by timer code that DT has specified "ti,hwmod" property for timer. 'oh_name' in this scenario would be a junk value, this would result in module not being enabled by hwmod API's for timer, and in turn crash. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Jon Hunter <jgchunter@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ACPI / PM: Fix corner case in acpi_bus_update_power()Rafael J. Wysocki
The role of acpi_bus_update_power() is to update the given ACPI device object's power.state field to reflect the current physical state of the device (as inferred from the configuration of power resources and _PSC, if available). For this purpose it calls acpi_device_set_power() that should update the power resources' reference counters and set power.state as appropriate. However, that doesn't work if the "new" state is D1, D2 or D3hot and the the current value of power.state means D3cold, because in that case acpi_device_set_power() will refuse to transition the device from D3cold to non-D0. To address this problem, make acpi_bus_update_power() call acpi_power_transition() directly to update the power resources' reference counters and only use acpi_device_set_power() to put the device into D0 if the current physical state of it cannot be determined. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org>
2013-07-04cpufreq: Fix serialization of frequency transitionsViresh Kumar
Commit 7c30ed ("cpufreq: make sure frequency transitions are serialized") interacts poorly with systems that have a single core freqency for all cores. On such systems we have a single policy for all cores with several CPUs. When we do a frequency transition the governor calls the pre and post change notifiers which causes cpufreq_notify_transition() per CPU. Since the policy is the same for all of them all CPUs after the first and the warnings added are generated by checking a per-policy flag the warnings will be triggered for all cores after the first. Fix this by allowing notifier to be called for n times. Where n is the number of cpus in policy->cpus. Reported-and-tested-by: Mark Brown <broonie@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-04ALSA: hda - Fix EAPD vmaster hook for AD1884 & coTakashi Iwai
ad1884_fixup_hp_eapd() tries to set the NID for controlling the speaker EAPD from the pin configuration. But the current code can't work expectedly since it sets spec->eapd_nid before calling the generic parser where the autocfg pins are set up. This patch changes the function to set spec->eapd_nid after the generic parser call while it sets vmaster hook unconditionally. The spec->eapd_nid check is moved in the hook function itself instead. Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-04Merge remote-tracking branch 'regulator/fix/sec' into regulator-linusMark Brown
2013-07-04Merge remote-tracking branch 'regulator/fix/s5m8767' into regulator-linusMark Brown
2013-07-04Merge remote-tracking branch 'regulator/fix/max8997' into regulator-linusMark Brown
2013-07-04MAINTAINERS: Update git repositorySachin Kamat
The current git repository hasn't been updated since quite a long time. Update it with Mark's git repo which is the currently maintained one. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04regulator: max8997: Fix a trivial typo in documentationSachin Kamat
Changed volatage to voltage. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04regulator: s5m8767: Fix a trivial typo in documentationSachin Kamat
Changed volatage to voltage. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04metag: move EXPORT_SYMBOL(csum_partial) to metag_ksyms.cJames Hogan
Move EXPORT_SYMBOL(csum_partial) from lib/checksum.c into metag_ksyms.c so that it doesn't get omitted by the static linker if it's not used by any other statically linked code, which can result in undefined symbols when building modules. For example a randconfig caused the following error: ERROR: "csum_partial" [fs/reiserfs/reiserfs.ko] undefined! Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-07-04drm/exynos: remove duplicated error routine and unnecessary assignSeung-Woo Kim
There were duplicated error handling routines during allocating pages in lowlevel_buffer_allocate() and g2d_userptr_get_dma_addr(). Also unnecessary NULL assignments for variable used not any more are removed from g2d_userptr_get_dma_addr() and g2d_userptr_put_dma_addr(). Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: fix pages allocation size in lowlevel_buffer_allocateYoungJun Cho
When IOMMU is not supported, buf->pages has to be allocated to assign the result of phys_to_page() which return type is struct page *. So it is sufficient to allocate buf->pages with the size of multiple struct page pointers. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: use drm_calloc_large when allocates pointer arrayYoungJun Cho
If the type of object is pointer array, the drm_calloc_large() is more suitable than kzalloc() for its allocation function. And uses drm_free_large() instead of kfree() also. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: add error check routine in exynos_drm_openYoungJun Cho
When the exynos_drm_subdrv_open() returns error, the file_priv should be released and file->driver_priv set to NULL. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: initialize the buf_num in vp_video_bufferYoungJun Cho
The buf_num in vp_video_buffer() should be 1 or 2, but it is not initialized, and only set to 2 in NV12M or NV12MT cases. So this patch initializes the buf_num with 1 as default. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: remove dead code in vidi_power_onYoungJun Cho
The type of input parameter enable is bool, so it does not need to check whether true or false. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04drm/exynos: fix not to remain exynos_gem_obj as a leakYoungJun Cho
The exynos_drm_gem_create() only calls drm_gem_object_release() when exynos_drm_alloc_buf() is failed, and exynos_gem_obj remains as a leak, which is allocated in exynos_drm_gem_init(). So this patch fixes it not to remain as a leak. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04of/documentation: Update hpd gpio property for exynos_hdmiSachin Kamat
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-07-04md/raid10: fix bug which causes all RAID10 reshapes to move no data.NeilBrown
The recent comment: commit 7e83ccbecd608b971f340e951c9e84cd0343002f md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-04md/raid5: allow 5-device RAID6 to be reshaped to 4-device.NeilBrown
There is a bug in 'check_reshape' for raid5.c To checks that the new minimum number of devices is large enough (which is good), but it does so also after the reshape has started (bad). This is bad because - the calculation is now wrong as mddev->raid_disks has changed already, and - it is pointless because it is now too late to stop. So only perform that test when reshape has not been committed to. Signed-off-by: NeilBrown <neilb@suse.de>
2013-07-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver to support GMT G762/G763 pwm fan controllers - add support for DS1631, DS1721, and DS1731 to ds1621 driver - remove detect function from ds1621 driver as unreliable - bug fixes in nct6775, iio_hwmon, and adm1021 drivers - remove redundant platform_set_drvdata in various drivers - add device tree support to ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ds1621) Fix temperature rounding operations hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775 hwmon: (nct6775) Fix temperature alarm attributes Add support for GMT G762/G763 PWM fan controllers hwmon: (ina2xx) Add device tree support to pass the shunt resistor hwmon: (ds1621) Update documentation hwmon: (ds1621) Add DS1731 chip support to ds1621 driver hwmon: (iio_hwmon) add alias table hwmon: (adm1021) Do not create min sysfs attributes for LM84 hwmon: (ds1621) Remove detect function hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation hwmon: (ds1621) Add ds1721 update interval sysfs attribute hwmon: (ds1621) Add ds1721 chip support hwmon: (w83627ehf) Remove redundant platform_set_drvdata() hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata() hwmon: (i5k_amb) Remove redundant platform_set_drvdata() hwmon: (coretemp) Remove redundant platform_set_drvdata() hwmon: (abituguru3) Remove redundant platform_set_drvdata()
2013-07-03Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: - lp55xx device tree updates - mc13xxx driver updates - some clean up * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: mc13783: Fix "uninitialized variable" warning leds: Convert led class driver from legacy pm ops to dev_pm_ops leds: leds-mc13783: Add MC13892 LED support leds: leds-mc13783: Prepare driver to support MC13892 LEDs leds: renesas-tpu: cleanup a small type issue leds: use platform_{get,set}_drvdata() leds: leds-gpio: Let device core handle pinctrl leds: lp5562: Properly setup of_device_id table leds: lp5523: Properly setup of_device_id table leds: lp5521: Properly setup of_device_id table leds: lp5562: support the device tree feature leds: lp55xx: support dynamic channel settings in the device tree structure leds: leds-ns2: remove unnecessary platform_set_drvdata() leds: leds-mc13783: remove unnecessary platform_set_drvdata() leds: leds-gpio: remove unnecessary platform_set_drvdata() leds: atmel-pwm: remove unnecessary platform_set_drvdata() leds: lp55xx: add support for Device Tree bindings
2013-07-03Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
2013-07-03Merge branch 'for-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ...
generated by cgit (git 2.34.1) at 2025-09-16 01:05:03 +0000