summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-01ipv6/addrconf: annotate data-races around devconf fields (I)Eric Dumazet
Annotate lockless reads and writes on following devconf fields: - regen_min_advance - regen_max_retry - dad_transmits - use_tempaddr - max_addresses - max_desync_factor - temp_valid_lft - rtr_solicits - rtr_solicit_max_interval - rtr_solicit_interval - rtr_solicit_delay - enhanced_dad - accept_redirects Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: addrconf_disable_policy() optimizationEric Dumazet
Writing over /proc/sys/net/ipv6/conf/default/disable_policy does not need to hold RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around devconf->disable_policyEric Dumazet
idev->cnf.disable_policy and net->ipv6.devconf_all->disable_policy can be read locklessly. Add appropriate annotations on reads and writes. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around devconf->proxy_ndpEric Dumazet
devconf->proxy_ndp can be read and written locklessly, add appropriate annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races in rt6_probe()Eric Dumazet
Use READ_ONCE() while reading idev->cnf.rtr_probe_interval while its value could be changed. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around idev->cnf.ignore_routes_with_linkdownEric Dumazet
idev->cnf.ignore_routes_with_linkdown can be used without any locks, add appropriate annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races in ndisc_router_discovery()Eric Dumazet
Annotate reads from in6_dev->cnf.XXX fields, as they could change concurrently. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.forwardingEric Dumazet
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.hop_limitEric Dumazet
idev->cnf.hop_limit and net->ipv6.devconf_all->hop_limit might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Westphal <fw@strlen.de> # for netfilter parts Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.mtu6Eric Dumazet
idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: addrconf_disable_ipv6() optimizationEric Dumazet
Writing over /proc/sys/net/ipv6/conf/default/disable_ipv6 does not need to hold RTNL. v3: remove a wrong change (Jakub Kicinski feedback) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: annotate data-races around cnf.disable_ipv6Eric Dumazet
disable_ipv6 is read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. v2: do not preload net before rtnl_trylock() in addrconf_disable_ipv6() (Jiri) Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ipv6: add ipv6_devconf_read_txrx cacheline_groupEric Dumazet
IPv6 TX and RX fast path use the following fields: - disable_ipv6 - hop_limit - mtu6 - forwarding - disable_policy - proxy_ndp Place them in a group to increase data locality. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01net: lan78xx: fix runtime PM count underflow on link stopOleksij Rempel
Current driver has some asymmetry in the runtime PM calls. On lan78xx_open() it will call usb_autopm_get() and unconditionally usb_autopm_put(). And on lan78xx_stop() it will call only usb_autopm_put(). So far, it was working only because this driver do not activate autosuspend by default, so it was visible only by warning "Runtime PM usage count underflow!". Since, with current driver, we can't use runtime PM with active link, execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise, keep ref counting high as long as interface is open. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01x86/hyperv: Allow 15-bit APIC IDs for VTL platformsSaurabh Sengar
The current method for signaling the compatibility of a Hyper-V host with MSIs featuring 15-bit APIC IDs relies on a synthetic cpuid leaf. However, for higher VTLs, this leaf is not reported, due to the absence of an IO-APIC. As an alternative, assume that when running at a high VTL, the host supports 15-bit APIC IDs. This assumption is safe, as Hyper-V does not employ any architectural MSIs at higher VTLs This unblocks startup of VTL2 environments with more than 256 CPUs. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1705341460-18394-1-git-send-email-ssengar@linux.microsoft.com>
2024-03-01gpio: fix resource unwinding order in error pathBartosz Golaszewski
Hogs are added *after* ACPI so should be removed *before* in error path. Fixes: a411e81e61df ("gpiolib: add hogs support for machine code") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-03-01dt-bindings: net: renesas,ethertsn: Document default for delaysNiklas Söderlund
The internal delay properties are not mandatory and should have a documented default value. The device only supports either no delay or a fixed delay and the device reset default is no delay, document the default as no delay. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()Michael Kelley
In a CoCo VM, when transitioning memory from encrypted to decrypted, or vice versa, the caller of set_memory_encrypted() or set_memory_decrypted() is responsible for ensuring the memory isn't in use and isn't referenced while the transition is in progress. The transition has multiple steps, and the memory is in an inconsistent state until all steps are complete. A reference while the state is inconsistent could result in an exception that can't be cleanly fixed up. However, the kernel load_unaligned_zeropad() mechanism could cause a stray reference that can't be prevented by the caller of set_memory_encrypted() or set_memory_decrypted(), so there's specific code to handle this case. But a CoCo VM running on Hyper-V may be configured to run with a paravisor, with the #VC or #VE exception routed to the paravisor. There's no architectural way to forward the exceptions back to the guest kernel, and in such a case, the load_unaligned_zeropad() specific code doesn't work. To avoid this problem, mark pages as "not present" while a transition is in progress. If load_unaligned_zeropad() causes a stray reference, a normal page fault is generated instead of #VC or #VE, and the page-fault-based fixup handlers for load_unaligned_zeropad() resolve the reference. When the encrypted/decrypted transition is complete, mark the pages as "present" again. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240116022008.1023398-4-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240116022008.1023398-4-mhklinux@outlook.com>
2024-03-01x86/mm: Regularize set_memory_p() parameters and make non-staticMichael Kelley
set_memory_p() is currently static. It has parameters that don't match set_memory_p() under arch/powerpc and that aren't congruent with the other set_memory_* functions. There's no good reason for the difference. Fix this by making the parameters consistent, and update the one existing call site. Make the function non-static and add it to include/asm/set_memory.h so that it is completely parallel to set_memory_np() and is usable in other modules. No functional change. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/r/20240116022008.1023398-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240116022008.1023398-3-mhklinux@outlook.com>
2024-03-01x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callbackMichael Kelley
In preparation for temporarily marking pages not present during a transition between encrypted and decrypted, use slow_virt_to_phys() in the hypervisor callback. As long as the PFN is correct, slow_virt_to_phys() works even if the leaf PTE is not present. The existing functions that depend on vmalloc_to_page() all require that the leaf PTE be marked present, so they don't work. Update the comments for slow_virt_to_phys() to note this broader usage and the requirement to work even if the PTE is not marked present. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>
2024-03-01Documentation: hyperv: Add overview of PCI pass-thru device supportMichael Kelley
Add documentation topic for PCI pass-thru devices in Linux guests on Hyper-V and for the associated PCI controller driver (pci-hyperv.c). Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20240222200710.305259-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240222200710.305259-1-mhklinux@outlook.com>
2024-03-01Drivers: hv: vmbus: Update indentation in create_gpadl_header()Michael Kelley
A previous commit left the indentation in create_gpadl_header() unchanged for ease of review. Update the indentation and remove line wrap in two places where it is no longer necessary. No functional change. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240111165451.269418-2-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240111165451.269418-2-mhklinux@outlook.com>
2024-03-01Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()Michael Kelley
create_gpadl_header() creates a message header, and one or more message bodies if the number of GPADL entries exceeds what fits in the header. Currently the code for creating the message header is duplicated in the two halves of the main "if" statement governing whether message bodies are created. Eliminate the duplication by making minor tweaks to the logic and associated comments. While here, simplify the handling of memory allocation errors, and use umin() instead of open coding it. For ease of review, the indentation of sizable chunks of code is *not* changed. A follow-on patch updates only the indentation. No functional change. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240111165451.269418-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240111165451.269418-1-mhklinux@outlook.com>
2024-03-01fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()Michael Kelley
A recent commit removing the use of screen_info introduced a logic error. The error causes hvfb_getmem() to always return -ENOMEM for Generation 2 VMs. As a result, the Hyper-V frame buffer device fails to initialize. The error was introduced by removing an "else if" clause, leaving Gen2 VMs to always take the -ENOMEM error path. Fix the problem by removing the error path "else" clause. Gen 2 VMs now always proceed through the MMIO memory allocation code, but with "base" and "size" defaulting to 0. Fixes: 0aa0838c84da ("fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20240201060022.233666-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240201060022.233666-1-mhklinux@outlook.com>
2024-03-01Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memoryMichael Kelley
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the requested ring buffer size. The header size is always 1 page, and so its size varies based on the PAGE_SIZE for which the kernel is built. If the requested ring buffer size is a large power-of-2 size and the header size is small, the resulting size is inefficient in its use of memory. For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory allocator, and wastes 508 Kbytes of memory. In such situations, the exact size of the ring buffer isn't that important, and it's OK to allocate the 4 Kbyte header at the beginning of the 512 Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted. Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer sizes. "Large" is somewhat arbitrarily defined as 8 times the size of the ring buffer header (which is of size PAGE_SIZE). For example, for 4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first 4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer header. In both cases, smaller sizes add space for the header so the ring size isn't reduced too much by using part of the space for the header. For example, with a 64 Kbyte page size, we don't want a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half of the space for the header. In such a case, the memory allocation is less efficient, but it's the best that can be done. While the new algorithm slightly changes the amount of space allocated for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't known to be sensitive to small changes in ring buffer size, so there shouldn't be any effect. Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL") Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502 Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240229004533.313662-1-mhklinux@outlook.com>
2024-03-01hv_utils: Allow implicit ICTIMESYNCFLAG_SYNCPeter Martincic
Hyper-V hosts can omit the _SYNC flag to due a bug on resume from modern suspend. In such a case, the guest may fail to update its time-of-day to account for the period when it was suspended, and could proceed with a significantly wrong time-of-day. In such a case when the guest is significantly behind, fix it by treating a _SAMPLE the same as if _SYNC was received so that the guest time-of-day is updated. This is hidden behind param hv_utils.timesync_implicit. Signed-off-by: Peter Martincic <pmartincic@microsoft.com> Acked-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20231127213524.52783-1-pmartincic@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20231127213524.52783-1-pmartincic@linux.microsoft.com>
2024-03-01dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schemaAndrew Jeffery
Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/gpio@1e780000: failed to match any schema with compatible: ['aspeed,ast2400-gpio'] ``` Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-01gpio: acpi: Make acpi_gpio_count() take firmware node as a parameterAndy Shevchenko
Make acpi_gpio_count() take firmware node as a parameter in order to be aligned with other functions and decouple from unused device pointer. The latter helps to create a common fwnode_gpio_count() in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-01gpio: of: Make of_gpio_get_count() take firmware node as a parameterAndy Shevchenko
Make of_gpio_get_count() take firmware node as a parameter in order to be aligned with other functions and decouple from unused device pointer. The latter helps to create a common fwnode_gpio_count() in the future. While at it, rename to be of_gpio_count() to be aligned with the others. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-01gpiolib: Fix the error path order in gpiochip_add_data_with_key()Andy Shevchenko
After shuffling the code, error path wasn't updated correctly. Fix it here. Fixes: 2f4133bb5f14 ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-03-01gpio: 74x164: Enable output pins after registers are resetArturas Moskvinas
Chip outputs are enabled[1] before actual reset is performed[2] which might cause pin output value to flip flop if previous pin value was set to 1. Fix that behavior by making sure chip is fully reset before all outputs are enabled. Flip-flop can be noticed when module is removed and inserted again and one of the pins was changed to 1 before removal. 100 microsecond flipping is noticeable on oscilloscope (100khz SPI bus). For a properly reset chip - output is enabled around 100 microseconds (on 100khz SPI bus) later during probing process hence should be irrelevant behavioral change. Fixes: 7ebc194d0fd4 (gpio: 74x164: Introduce 'enable-gpios' property) Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1] Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2] Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-29Merge branch 'raid1-read_balance' into md-6.9Song Liu
From: Yu Kuai <yukuai3@huawei.com> Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> The original idea is that Paul want to optimize raid1 read performance([1]), however, we think that the original code for read_balance() is quite complex, and we don't want to add more complexity. Hence we decide to refactor read_balance() first, to make code cleaner and easier for follow up. Before this patchset, read_balance() has many local variables and many branches, it want to consider all the scenarios in one iteration. The idea of this patch is to divide them into 4 different steps: 1) If resync is in progress, find the first usable disk, patch 5; Otherwise: 2) Loop through all disks and skipping slow disks and disks with bad blocks, choose the best disk, patch 10. If no disk is found: 3) Look for disks with bad blocks and choose the one with most number of sectors, patch 8. If no disk is found: 4) Choose first found slow disk with no bad blocks, or slow disk with most number of sectors, patch 7. Note that step 3) and step 4) are super code path, and performance should not be considered. And after this patchset, we'll continue to optimize read_balance for step 2), specifically how to choose the best rdev to read. [1] https://lore.kernel.org/all/20240102125115.129261-1-paul.e.luse@linux.intel.com/ Yu Kuai (11): md: add a new helper rdev_has_badblock() md/raid1: factor out helpers to add rdev to conf md/raid1: record nonrot rdevs while adding/removing rdevs to conf md/raid1: fix choose next idle in read_balance() md/raid1-10: add a helper raid1_check_read_range() md/raid1-10: factor out a new helper raid1_should_read_first() md/raid1: factor out read_first_rdev() from read_balance() md/raid1: factor out choose_slow_rdev() from read_balance() md/raid1: factor out choose_bb_rdev() from read_balance() md/raid1: factor out the code to manage sequential IO md/raid1: factor out helpers to choose the best rdev from read_balance()
2024-02-29md/raid1: factor out helpers to choose the best rdev from read_balance()Yu Kuai
The way that best rdev is chosen: 1) If the read is sequential from one rdev: - if rdev is rotational, use this rdev; - if rdev is non-rotational, use this rdev until total read length exceed disk opt io size; 2) If the read is not sequential: - if there is idle disk, use it, otherwise: - if the array has non-rotational disk, choose the rdev with minimal inflight IO; - if all the underlaying disks are rotational disk, choose the rdev with closest IO; There are no functional changes, just to make code cleaner and prepare for following refactor. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-12-yukuai1@huaweicloud.com
2024-02-29md/raid1: factor out the code to manage sequential IOYu Kuai
There is no functional change for now, make read_balance() cleaner and prepare to fix problems and refactor the handler of sequential IO. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-11-yukuai1@huaweicloud.com
2024-02-29md/raid1: factor out choose_bb_rdev() from read_balance()Yu Kuai
read_balance() is hard to understand because there are too many status and branches, and it's overlong. This patch factor out the case to read the rdev with bad blocks from read_balance(), there are no functional changes. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-10-yukuai1@huaweicloud.com
2024-02-29md/raid1: factor out choose_slow_rdev() from read_balance()Yu Kuai
read_balance() is hard to understand because there are too many status and branches, and it's overlong. This patch factor out the case to read the slow rdev from read_balance(), there are no functional changes. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-9-yukuai1@huaweicloud.com
2024-02-29md/raid1: factor out read_first_rdev() from read_balance()Yu Kuai
read_balance() is hard to understand because there are too many status and branches, and it's overlong. This patch factor out the case to read the first rdev from read_balance(), there are no functional changes. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-8-yukuai1@huaweicloud.com
2024-02-29md/raid1-10: factor out a new helper raid1_should_read_first()Yu Kuai
If resync is in progress, read_balance() should find the first usable disk, otherwise, data could be inconsistent after resync is done. raid1 and raid10 implement the same checking, hence factor out the checking to make code cleaner. Noted that raid1 is using 'mddev->recovery_cp', which is updated after all resync IO is done, while raid10 is using 'conf->next_resync', which is inaccurate because raid10 update it before submitting resync IO. Fortunately, raid10 read IO can't concurrent with resync IO, hence there is no problem. And this patch also switch raid10 to use 'mddev->recovery_cp'. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-7-yukuai1@huaweicloud.com
2024-02-29md/raid1-10: add a helper raid1_check_read_range()Yu Kuai
The checking and handler of bad blocks appear many timers during read_balance() in raid1 and raid10. This helper will be used in later patches to simplify read_balance() a lot. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-6-yukuai1@huaweicloud.com
2024-02-29md/raid1: fix choose next idle in read_balance()Yu Kuai
Commit 12cee5a8a29e ("md/raid1: prevent merging too large request") add the case choose next idle in read_balance(): read_balance: for_each_rdev if(next_seq_sect == this_sector || dist == 0) -> sequential reads best_disk = disk; if (...) choose_next_idle = 1 continue; for_each_rdev -> iterate next rdev if (pending == 0) best_disk = disk; -> choose the next idle disk break; if (choose_next_idle) -> keep using this rdev if there are no other idle disk contine However, commit 2e52d449bcec ("md/raid1: add failfast handling for reads.") remove the code: - /* If device is idle, use it */ - if (pending == 0) { - best_disk = disk; - break; - } Hence choose next idle will never work now, fix this problem by following: 1) don't set best_disk in this case, read_balance() will choose the best disk after iterating all the disks; 2) add 'pending' so that other idle disk will be chosen; 3) add a new local variable 'sequential_disk' to record the disk, and if there is no other idle disk, 'sequential_disk' will be chosen; Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.") Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-5-yukuai1@huaweicloud.com
2024-02-29md/raid1: record nonrot rdevs while adding/removing rdevs to confYu Kuai
For raid1, each read will iterate all the rdevs from conf and check if any rdev is non-rotational, then choose rdev with minimal IO inflight if so, or rdev with closest distance otherwise. Disk nonrot info can be changed through sysfs entry: /sys/block/[disk_name]/queue/rotational However, consider that this should only be used for testing, and user really shouldn't do this in real life. Record the number of non-rotational disks in conf, to avoid checking each rdev in IO fast path and simplify read_balance() a little bit. Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-4-yukuai1@huaweicloud.com
2024-02-29md/raid1: factor out helpers to add rdev to confYu Kuai
There are no functional changes, just make code cleaner and prepare to record disk non-rotational information while adding and removing rdev to conf Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-3-yukuai1@huaweicloud.com
2024-02-29md: add a new helper rdev_has_badblock()Yu Kuai
The current api is_badblock() must pass in 'first_bad' and 'bad_sectors', however, many caller just want to know if there are badblocks or not, and these caller must define two local variable that will never be used. Add a new helper rdev_has_badblock() that will only return if there are badblocks or not, remove unnecessary local variables and replace is_badblock() with the new helper in many places. There are no functional changes, and the new helper will also be used later to refactor read_balance(). Co-developed-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Paul Luse <paul.e.luse@linux.intel.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240229095714.926789-2-yukuai1@huaweicloud.com
2024-02-29lib/string_helpers: Add flags param to string_get_size()Andy Shevchenko
The new flags parameter allows controlling - Whether or not the units suffix is separated by a space, for compatibility with sort -h - Whether or not to append a B suffix - we're not always printing bytes. Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20240229205345.93902-1-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-29x86, relocs: Ignore relocations in .notes sectionKees Cook
When building with CONFIG_XEN_PV=y, .text symbols are emitted into the .notes section so that Xen can find the "startup_xen" entry point. This information is used prior to booting the kernel, so relocations are not useful. In fact, performing relocations against the .notes section means that the KASLR base is exposed since /sys/kernel/notes is world-readable. To avoid leaking the KASLR base without breaking unprivileged tools that are expecting to read /sys/kernel/notes, skip performing relocations in the .notes section. The values readable in .notes are then identical to those found in System.map. Reported-by: Guixiong Wei <guixiongwei@gmail.com> Closes: https://lore.kernel.org/all/20240218073501.54555-1-guixiongwei@gmail.com/ Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Fixes: da1a679cde9b ("Add /sys/kernel/notes") Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-29objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocksJosh Poimboeuf
If SAVE and RESTORE unwind hints are in different basic blocks, and objtool sees the RESTORE before the SAVE, it errors out with: vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo In such a case, defer following the RESTORE block until the straight-line path gets followed later. Fixes: 8faea26e6111 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/ Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble Signed-off-by: Kees Cook <keescook@chromium.org>
2024-03-01Merge tag 'drm-misc-next-2024-02-29' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: backlight: - corgi: include backlight header fbdev: - Cleanup includes in public header file - fbtft: Include backlight header Core Changes: edid: - Remove built-in EDID data dp: - Avoid AUX transfers on powered-down displays - Add VSC SDP helpers modesetting: - Add sanity checks for polling - Cleanups scheduler: - Cleanups tests: - Add helpers for mode-setting tests Driver Changes: i915: - Use shared VSC SDP helper mgag200: - Work around PCI write bursts mxsfb: - Use managed mode config nouveau: - Include backlight header where necessary qiac: - Cleanups sun4: - HDMI: updates to atomic mode setting tegra: - Fix GEM refounting in error paths tidss: - Fix multi display - Fix initial Z position v3d: - Support display MMU page size Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240229084806.GA21616@localhost.localdomain
2024-03-01drm/nouveau: keep DMA buffers required for suspend/resumeSid Pranjale
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly. This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze. This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init. Fixes: 042b5f83841fb ("drm/nouveau: fix several DMA buffer leaks") Signed-off-by: Sid Pranjale <sidpranjale127@protonmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-03-01nouveau: report byte usage in VRAM usage.Dave Airlie
Turns out usage is always in bytes not shifted. Fixes: 72fa02fdf833 ("nouveau: add an ioctl to report vram usage") Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-03-01Merge tag 'amd-drm-fixes-6.8-2024-02-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-02-29: amdgpu: - Fix potential buffer overflow - Fix power min cap - Suspend/resume fix - SI PM fix - eDP fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240229152424.6646-1-alexander.deucher@amd.com
generated by cgit (git 2.34.1) at 2025-09-21 21:36:13 +0000