| Age | Commit message (Collapse) | Author |
|---|
|
The sg_miter used to loop over the returned sglist from a
transfer in the esdhc subdriver for SDHCI can be called
from atomic context so the miter needs to be atomic.
sdhci_request_done() is always called from process context,
either as a work or as part of the threaded interrupt handler,
but the one case when we are actually calling .request_done()
from an atomic context is in sdhci_irq().
Fix this by flagging the miter atomic so we always use
kmap_atomic().
Fixes: e8a167b84886 ("mmc: sdhci-esdhc-mcf: Use sg_miter for swapping")
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240228-fix-sdhci-esdhc-mcf-2-v2-1-4ebb3fd691ea@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some devices support only the default and the 100MHz case, add the
support for this to the binding to avoid warnings.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221184602.3639619-1-m.felsch@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Andrew Lunn says:
====================
drivers: net: Convert EEE handling to use linkmode bitmaps
EEE has until recently been limited to lower speeds due to the use of
the legacy u32 for link speeds. This restriction has been lifted, with
the use of linkmode bitmaps, added in the following patches:
1f069de63602 ethtool: add linkmode bitmap support to struct ethtool_keee
1d756ff13da6 ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keee
285cc15cc555 ethtool: adjust struct ethtool_keee to kernel needs
0b3100bc8fa7 ethtool: switch back from ethtool_keee to ethtool_eee for ioctl
d80a52335374 ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side
This patchset converts the remaining MAC drivers still using the old
_u32 to link modes.
A couple of Intel drivers do odd things with EEE, setting the autoneg
bit. It is unclear why, no other driver does, ethtool does not display
it, and EEE is always negotiated. One patch in this series deletes
this code.
With all users of the legacy _u32 changed to link modes, the _u32
values are removed from keee, and support for them in the ethtool core
is removed.
---
Changes in v5:
- Restore zeroing eee_data.advertised in ax8817_178a
- Fix lp_advertised -> supported in ixgdb
- Link to v4: https://lore.kernel.org/r/20240218-keee-u32-cleanup-v4-0-71f13b7c3e60@lunn.ch
Changes in v4:
- Add missing conversion in igb
- Add missing conversion in r8152
- Add patch to remove now unused _u32 members
- Link to v3: https://lore.kernel.org/r/20240217-keee-u32-cleanup-v3-0-fcf6b62a0c7f@lunn.ch
Changes in v3:
- Add list of commits adding linkmodes to EEE to cover letter
- Fix grammar error in cover letter.
- Add Reviewed-by from Jacob Keller
- Link to v2: https://lore.kernel.org/r/20240214-keee-u32-cleanup-v2-0-4ac534b83d66@lunn.ch
Changes in v2:
- igb: Fix type 100BaseT to 1000BaseT.
- Link to v1: https://lore.kernel.org/r/20240204-keee-u32-cleanup-v1-0-fb6e08329d9a@lunn.ch
====================
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is enough to make eMMC, networking, UART (console), RTC and a hard
disk accessible. Still missing are (at least): USB, LEDs, regulators,
fan.
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Link: https://lore.kernel.org/r/0d9fa5d730ac1cb91261b25b6809fcef3a12f03a.1709034476.git.ukleinek@debian.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This is a SOHO NAS with 4 hd bays and 4 GB of RAM.
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a583992a896c80962b820803526eb593122c1692.1709034476.git.ukleinek@debian.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a
video connector for a MIPI-DSI/CSI adapter.
This dts is for usage with the RK3588-Q7 SoM Tiger.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240227164659.705271-5-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3588.
It provides the following feature set:
* up to 16GB LPDDR4x
* on-module eMMC
* SD card (on a baseboard) via edge connector
* Gigabit Ethernet with on-module GbE PHY
* HDMI/eDP
* MIPI-DSI
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
* HDMI input over FPC connector
* CAN
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 host
* PCIe
- 1x PCIe 2.1 Gen3, 4 lanes
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
* on-module ATtiny816 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
* on-module Secure Element with Global Platform 2.2.1 compliant
JavaCard environment
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240227164659.705271-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add binding for the Tiger Q7 SoM when used in conjunction with the Haikou
baseboard.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240227164659.705271-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The rockchip,trcm-sync-tx-only property is at this time only documented
for the tdm variant of Rockchip i2s controllers.
While there was a series [0] adding code and binding for the property,
it doesn't seem to have gone forward back in 2021.
So for now fix the devicetree check by removing the property from rk3588
i2s controllers until support for it gets merged.
[0] https://patchwork.kernel.org/project/linux-rockchip/patch/1629796734-4243-5-git-send-email-sugar.zhang@rock-chips.com/
Fixes: 8ae112a5554f ("arm64: dts: rockchip: Add rk3588s I2S nodes")
Cc: Sugar Zhang <sugar.zhang@rock-chips.com>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240227164659.705271-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Considering that amd_sfh exists only on AMD platforms, set the AMD SFH
driver to depend on x86 to avoid build warnings or errors on other
architectures, as shown below.
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c: In function 'amd_mp2_pci_probe':
drivers/hid/amd-sfh-hid/amd_sfh_pcie.c:413:21: error: 'boot_cpu_data'
undeclared (first use in this function); did you mean 'boot_cpu_hwid'?
413 | if (boot_cpu_data.x86 >= 0x1A)
| ^~~~~~~~~~~~~
| boot_cpu_hwid
Fixes: 6296562f30b1 ("HID: amd_sfh: Extend MP2 register access to SFH")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240228145648.41c493ec@canb.auug.org.au/
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
We mistakenly always fire lock contention tracepoints in the writer path,
while it should be conditional on the trylock result.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20231108215322.2845536-1-namhyung@kernel.org
|
|
The debugging code enabled by CONFIG_DEBUG_RWSEMS=y will only be
compiled in when CONFIG_PREEMPT_RT isn't set. There is no point to
allow CONFIG_DEBUG_RWSEMS to be set in a kernel configuration where
CONFIG_PREEMPT_RT is also set. Make them mutually exclusive.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222150540.79981-5-longman@redhat.com
|
|
Clarify in the comments that the RWSEM_READER_OWNED bit in the owner
field is just a hint, not an authoritative state of the rwsem.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240222150540.79981-4-longman@redhat.com
|
|
CONFIG_DEBUG_MUTEXES and CONFIG_PREEMPT_RT are mutually exclusive. They
can't be both set at the same time. Move up the mutex_destroy() function
declaration and the __DEBUG_MUTEX_INITIALIZER() macro above the "#ifndef
CONFIG_PREEMPT_RT" section to eliminate duplicated mutex_destroy()
declaration.
Also remove the duplicated mutex_trylock() function declaration in the
CONFIG_PREEMPT_RT section.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240222150540.79981-3-longman@redhat.com
|
|
When CONFIG_LOCK_EVENT_COUNTS is off, the wait_early variable will be
set but not used. This is expected. Recent compilers will not generate
wait_early code in this case.
Add the __maybe_unused attribute to wait_early for suppressing this
W=1 warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240222150540.79981-2-longman@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202312260422.f4pK3f9m-lkp@intel.com/
|
|
There's a somewhat common pattern of using FIELD_PREP()
even for single bits, e.g.
cmd->info1 |= FIELD_PREP(HTT_SRNG_SETUP_CMD_INFO1_RING_FLAGS_MSI_SWAP,
!!(params.flags & HAL_SRNG_FLAGS_MSI_SWAP));
which might as well be written as
if (params.flags & HAL_SRNG_FLAGS_MSI_SWAP)
cmd->info1 |= HTT_SRNG_SETUP_CMD_INFO1_RING_FLAGS_MSI_SWAP;
(since info1 is fully initialized to start with), but in
a long chain of FIELD_PREP() this really seems fine.
However, it triggers a sparse warning, in the check in
the macro for whether a constant value fits into the mask,
as this contains a "& (_val)". In this case, this really
is always intentional, so just suppress the warning by
adding "0+" to the expression, indicating explicitly that
this is correct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223100146.d243b6b1a9a1.I033828b1187c6bccf086e31400f7e933bb8373e7@changeid
|
|
Moving struct ieee80211_sta *sta variable definition to the front
of the code to fix the ISO C90 forbids mixed declarations and code
warning.
Fixes: 43532c050f8e ("wifi: rtl8xxxu: support multiple interfaces in set_aifs()")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/TYAP286MB03157A408E0D69F2F6FBD88ABC552@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
This code wants to compare the obtained value, but as it also
has a special type for register addresses to find places doing
such compares and calculations wrong, we need explicit casts
here to silence sparse.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.976fcd59e97a.I0bba4ef7dc2847ce8ab5ec229149e1a09413b8b9@changeid
|
|
Clearly writing __le32 was intended here, so just put the
right casts into the code to silence sparse about it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.ce0c714124e9.I2b5710b761f63522574fbe7654d37151c31e0b77@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.06e5ade90bcd.I41a0cbae1fa259cfbf5fa117ddfce908877475a2@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.c64e2d348453.Iccc4ace1116721a044e5f31f40ea7709e72145f3@changeid
|
|
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct type in the hsr_forward_do() comment.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Justin Iurman says:
====================
ioam6: netlink multicast event
v5:
- remove the "must be the destination" check before sending an ioam6
event
v4:
- rebase on top of net merge
v3:
- patchset was mistakenly superseded due to same cover title used for
iproute2-next equivalent patch -> resend (renamed)
v2:
- fix warnings
Add generic netlink multicast event support to ioam6 as another solution
to share IOAM data with user space. The other one being via IPv6 raw
sockets combined with ancillary data (or packet socket, if the listener
does not need the processing of the IOAM Option-Type, since the hook is
before in that case). This patchset focuses on the IOAM Pre-allocated
Trace (the only Option-Type currently supported in the kernel), and so
on IOAM "trace" events. See an example of a consumer here [1].
[1] https://github.com/Advanced-Observability/ioam-agent-python/blob/netlink_event/ioam-agent.py
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new api to support ioam6 events for generic netlink multicast. A
first "trace" event is added to the list of ioam6 events, which will
represent an IOAM Pre-allocated Trace Option-Type. It provides another
solution to share IOAM data with user space.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The drm_num_crtcs() helper determines the number of CRTCs by iterating
over the list of CRTCs that have been registered with the mode config.
However, we already keep track of that number in the mode config's
num_crtcs field, so we can simply retrieve the value from that and
remove the extra helper function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227112038.411846-1-thierry.reding@gmail.com
|
|
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.
Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason Xing says:
====================
introduce drop reasons for tcp receive path
When I was debugging the reason about why the skb should be dropped in
syn cookie mode, I found out that this NOT_SPECIFIED reason is too
general. Thus I decided to refine it.
v10
Link: https://lore.kernel.org/netdev/20240223193321.6549-1-kuniyu@amazon.com/
1. fix three nit problems (Kuniyuki)
2. add reviewed-by tag (Kuniyuki)
v9
Link: https://lore.kernel.org/netdev/20240222113003.67558-1-kerneljasonxing@gmail.com/
1. nit: remove one unneeded 'else' (David)
2. add reviewed-by tags (Eric, David)
v8
Link: https://lore.kernel.org/netdev/20240221025732.68157-1-kerneljasonxing@gmail.com/
1. refine part of codes in patch [03/10] and patch [10/10] (Eric)
2. squash patch [11/11] in the last version into patch [10/11] (Eric)
3. add reviewed-by tags (Eric)
v7
Link: https://lore.kernel.org/all/20240219032838.91723-1-kerneljasonxing@gmail.com/
1. fix some misspelled problem (Kuniyuki)
2. remove redundant codes in tcp_v6_do_rcv() (Kuniyuki)
3. add reviewed-by tag in patch [02/11] (Kuniyuki)
v6
Link: https://lore.kernel.org/all/c987d2c79e4a4655166eb8eafef473384edb37fb.camel@redhat.com/
Link: https://lore.kernel.org/all/CAL+tcoAgSjwsmFnDh_Gs9ZgMi-y5awtVx+4VhJPNRADjo7LLSA@mail.gmail.com/
1. Take one case into consideration in tcp_v6_do_rcv(), behave like old
days, or else it will trigger errors (Paolo).
2. Extend NO_SOCKET reason to consider two more reasons for request
socket and child socket.
v5:
Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
1. Use SKB_DROP_REASON_IP_OUTNOROUTES instead of introducing a new
one (Eric, David)
2. Reuse SKB_DROP_REASON_NOMEM to handle failure of request socket
allocation (Eric)
3. Reuse NO_SOCKET instead of introducing COOKIE_NOCHILD
4. avoid duplication of these opt_skb tests/actions (Eric)
5. Use new name (TCP_ABORT_ON_DATA) for readability (David)
6. Reuse IP_OUTNOROUTES instead of INVALID_DST (Eric)
---
HISTORY
This series is combined with 2 series sent before suggested by Jakub. So
I'm going to separately write changelogs for each of them.
PATCH 1/11 - 5/11
preivious Link: https://lore.kernel.org/netdev/20240213134205.8705-1-kerneljasonxing@gmail.com/
Summary
1. introduce all the dropreasons we need, [1/11] patch.
2. use new dropreasons in ipv4 cookie check, [2/11],[3/11] patch.
3. use new dropreasons ipv6 cookie check, [4/11],[5/11] patch.
v4:
Link: https://lore.kernel.org/netdev/20240212172302.3f95e454@kernel.org/
1. Fix misspelled name in Kdoc as suggested by Jakub.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
PATCH 6/11 - 11/11
previous Link: https://lore.kernel.org/netdev/20240213140508.10878-1-kerneljasonxing@gmail.com/
v4:
Link: https://lore.kernel.org/netdev/CANn89iJar+H3XkQ8HpsirH7b-_sbFe9NBUdAAO3pNJK3CKr_bg@mail.gmail.com/
Link: https://lore.kernel.org/netdev/20240213131205.4309-1-kerneljasonxing@gmail.com/
Already got rid of @acceptable in tcp_rcv_state_process(), so I need to
remove *TCP_CONNREQNOTACCEPTABLE related codes which I wrote in the v3
series.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/20240204104601.55760-1-kerneljasonxing@gmail.com/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch does two things:
1) add two more new reasons
2) only change the return value(1) to various drop reason values
for the future use
For now, we still cannot trace those two reasons. We'll implement the full
function in the subsequent patch in this series.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
