| Age | Commit message (Collapse) | Author |
|---|
|
Merge the few remaining patches stuck into drm-misc-next-fixes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After commit 36008fe6e3dc ("smb: client: don't try following DFS links
in cifs_tree_connect()"), TCP_Server_Info::leaf_fullpath will no
longer be changed, so there is no need to kstrdup() it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the client attempts to tree connect to a domain-based DFS
namespace from a DFS interlink target, the server will return
STATUS_BAD_NETWORK_NAME and the following will appear on dmesg:
CIFS: VFS: BAD_NETWORK_NAME: \\dom\dfs
Since a DFS share might contain several DFS interlinks and they expire
after 10 minutes, the above message might end up being flooded on
dmesg when mounting or accessing them.
Print this only once per share.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers don't respect the DFSREF_STORAGE_SERVER bit, so
unconditionally tree connect to DFS link target and then decide
whether or not continue chasing DFS referrals for DFS interlinks.
Otherwise the client would fail to mount such shares.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Ido Schimmel says:
====================
vxlan: Age FDB entries based on Rx traffic
tl;dr - This patchset prevents VXLAN FDB entries from lingering if
traffic is only forwarded to a silent host.
The VXLAN driver maintains two timestamps for each FDB entry: 'used' and
'updated'. The first is refreshed by both the Rx and Tx paths and the
second is refreshed upon migration.
The driver ages out entries according to their 'used' time which means
that an entry can linger when traffic is only forwarded to a silent host
that might have migrated to a different remote.
This patchset solves the problem by adjusting the above semantics and
aligning them to those of the bridge driver. That is, 'used' time is
refreshed by the Tx path, 'updated' time is refresh by Rx path or user
space updates and entries are aged out according to their 'updated'
time.
Patches #1-#2 perform small changes in how the 'used' and 'updated'
fields are accessed.
Patches #3-#5 refresh the 'updated' time where needed.
Patch #6 flips the driver to age out FDB entries according to their
'updated' time.
Patch #7 removes unnecessary updates to the 'used' time.
Patch #8 extends a test case to cover aging of FDB entries in the
presence of Tx traffic.
====================
Link: https://patch.msgid.link/20250204145549.1216254-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the VXLAN FDB aging test case to verify that FDB entries are aged
out when they only forward traffic and not refreshed by received
traffic.
The test fails before "vxlan: Age out FDB entries based on 'updated'
time":
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
[...]
# echo $?
1
And passes after it:
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [ OK ]
[...]
# echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the VXLAN driver ages out FDB entries based on their 'updated'
time we can remove unnecessary updates of the 'used' time from the Rx
path and the control path, so that the 'used' time is only updated by
the Tx path.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the VXLAN driver ages out FDB entries based on their 'used'
time which is refreshed by both the Tx and Rx paths. This means that an
FDB entry will not age out if traffic is only forwarded to the target
host:
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
# mausezahn vx1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
This is wrong as an FDB entry will remain present when we no longer have
an indication that the host is still behind the current remote. It is
also inconsistent with the bridge driver:
# ip link add name br1 up type bridge ageing_time $((10 * 100))
# ip link add name swp1 up master br1 type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic
# bridge fdb get 00:11:22:33:44:55 br br1
00:11:22:33:44:55 dev swp1 master br1
# mausezahn br1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br br1
Error: Fdb entry not found.
Solve this by aging out entries based on their 'updated' time, which is
not refreshed by the Tx path:
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge fdb get 00:11:22:33:44:55 br vx1 self
00:11:22:33:44:55 dev vx1 dst 198.51.100.1 self
# mausezahn vx1 -a own -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:11:22:33:44:55 br vx1 self
Error: Fdb entry not found.
But is refreshed by the Rx path:
# ip address add 192.0.2.1/32 dev lo
# ip link add name vx1 up type vxlan id 10010 local 192.0.2.1 dstport 4789 localbypass
# ip link add name vx2 up type vxlan id 20010 local 192.0.2.1 dstport 4789 learning ageing 10
# bridge fdb add 00:11:22:33:44:55 dev vx1 self static dst 127.0.0.1 vni 20010
# mausezahn vx1 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 0 -p 100 -q &
# sleep 20
# bridge fdb get 00:aa:bb:cc:dd:ee br vx2 self
00:aa:bb:cc:dd:ee dev vx2 dst 127.0.0.1 self
# pkill mausezahn
# sleep 20
# bridge fdb get 00:aa:bb:cc:dd:ee br vx2 self
Error: Fdb entry not found.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a host migrates to a different remote and a packet is received from
the new remote, the corresponding FDB entry is updated and its 'updated'
time is refreshed.
However, when user space replaces the remote of an FDB entry, its
'updated' time is not refreshed:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.2
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
This can lead to the entry being aged out prematurely and it is also
inconsistent with the bridge driver:
# ip link add name br1 up type bridge
# ip link add name swp1 master br1 up type dummy
# ip link add name swp2 master br1 up type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# sleep 10
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev swp2 master dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
0
Adjust the VXLAN driver to refresh the 'updated' time of an FDB entry
whenever one of its attributes is changed by user space:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.2
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'NTF_USE' flag can be used by user space to refresh FDB entries so
that they will not age out. Currently, the VXLAN driver implements it by
refreshing the 'used' field in the FDB entry as this is the field
according to which FDB entries are aged out.
Subsequent patches will switch the VXLAN driver to age out entries based
on the 'updated' field. Prepare for this change by refreshing the
'updated' field upon 'NTF_USE'. This is consistent with the bridge
driver's FDB:
# ip link add name br1 up type bridge
# ip link add name swp1 master br1 up type dummy
# bridge fdb add 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev swp1 master dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev swp1 master use dynamic vlan 1
# bridge -s -j fdb get 00:11:22:33:44:55 br br1 vlan 1 | jq '.[]["updated"]'
0
Before:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self use dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
20
After:
# ip link add name vx1 up type vxlan id 10010 dstport 4789
# bridge fdb add 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
10
# sleep 10
# bridge fdb replace 00:11:22:33:44:55 dev vx1 self use dynamic dst 198.51.100.1
# bridge -s -j -p fdb get 00:11:22:33:44:55 br vx1 self | jq '.[]["updated"]'
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when learning is enabled and a packet is received from the
expected remote, the 'updated' field of the FDB entry is not refreshed.
This will become a problem when we switch the VXLAN driver to age out
entries based on the 'updated' field.
Solve this by always refreshing an FDB entry when we receive a packet
with a matching source MAC address, regardless if it was received via
the expected remote or not as it indicates the host is alive. This is
consistent with the bridge driver's FDB.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid two volatile reads in the data path. Instead, read jiffies once
and only if an FDB entry was found.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].
Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().
[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit
write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
vxlan_xmit+0xb29/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
vxlan_xmit+0xadf/0x2380
dev_hard_start_xmit+0x84/0x2f0
__dev_queue_xmit+0x45a/0x1650
packet_xmit+0x100/0x150
packet_sendmsg+0x2114/0x2ac0
__sys_sendto+0x318/0x330
__x64_sys_sendto+0x76/0x90
x64_sys_call+0x14e8/0x1c00
do_syscall_64+0x9e/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f
Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[2]
#!/bin/bash
set +H
echo whitelist > /sys/kernel/debug/kcsan
echo !vxlan_xmit > /sys/kernel/debug/kcsan
ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if CONFIG_NET_IPGRE is enabled, but CONFIG_IPV6 is disabled:
net/ipv4/ip_gre.c: In function ‘ipgre_err’:
net/ipv4/ip_gre.c:144:22: error: variable ‘data_len’ set but not used [-Werror=unused-but-set-variable]
144 | unsigned int data_len = 0;
| ^~~~~~~~
Fix this by moving all data_len processing inside the IPV6-only section
that uses its result.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501121007.2GofXmh5-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d09113cfe2bfaca02f3dddf832fb5f48dd20958b.1738704881.git.geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Howells says:
====================
rxrpc: Call state fixes
Here some call state fixes for AF_RXRPC.
(1) Fix the state of a call to not treat the challenge-response cycle as
part of an incoming call's state set. The problem is that it makes
handling received of the final packet in the receive phase difficult
as that wants to change the call state - but security negotiations may
not yet be complete.
(2) Fix a race between the changing of the call state at the end of the
request reception phase of a service call, recvmsg() collecting the last
data and sendmsg() trying to send the reply before the I/O thread has
advanced the call state.
Link: https://lore.kernel.org/20250203110307.7265-2-dhowells@redhat.com
====================
Link: https://patch.msgid.link/20250204230558.712536-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a race in between the rxrpc I/O thread recording the end of the
receive phase of a call and recvmsg() examining the state of the call to
determine whether it has completed.
The problem is that call->_state records the I/O thread's view of the call,
not the application's view (which may lag), so that alone is not
sufficient. To this end, the application also checks whether there is
anything left in call->recvmsg_queue for it to pick up. The call must be
in state RXRPC_CALL_COMPLETE and the recvmsg_queue empty for the call to be
considered fully complete.
In rxrpc_input_queue_data(), the latest skbuff is added to the queue and
then, if it was marked as LAST_PACKET, the state is advanced... But this
is two separate operations with no locking around them.
As a consequence, the lack of locking means that sendmsg() can jump into
the gap on a service call and attempt to send the reply - but then get
rejected because the I/O thread hasn't advanced the state yet.
Simply flipping the order in which things are done isn't an option as that
impacts the client side, causing the checks in rxrpc_kernel_check_life() as
to whether the call is still alive to race instead.
Fix this by moving the update of call->_state inside the skb queue
spinlocked section where the packet is queued on the I/O thread side.
rxrpc's recvmsg() will then automatically sync against this because it has
to take the call->recvmsg_queue spinlock in order to dequeue the last
packet.
rxrpc's sendmsg() doesn't need amending as the app shouldn't be calling it
to send a reply until recvmsg() indicates it has returned all of the
request.
Fixes: 93368b6bd58a ("rxrpc: Move call state changes from recvmsg to I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250204230558.712536-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RXRPC_CALL_SERVER_SECURING state doesn't really belong with the other
states in the call's state set as the other states govern the call's Rx/Tx
phase transition and govern when packets can and can't be received or
transmitted. The "Securing" state doesn't actually govern the reception of
packets and would need to be split depending on whether or not we've
received the last packet yet (to mirror RECV_REQUEST/ACK_REQUEST).
The "Securing" state is more about whether or not we can start forwarding
packets to the application as recvmsg will need to decode them and the
decoding can't take place until the challenge/response exchange has
completed.
Fix this by removing the RXRPC_CALL_SERVER_SECURING state from the state
set and, instead, using a flag, RXRPC_CALL_CONN_CHALLENGING, to track
whether or not we can queue the call for reception by recvmsg() or notify
the kernel app that data is ready. In the event that we've already
received all the packets, the connection event handler will poke the app
layer in the appropriate manner.
Also there's a race whereby the app layer sees the last packet before rxrpc
has managed to end the rx phase and change the state to one amenable to
allowing a reply. Fix this by queuing the packet after calling
rxrpc_end_rx_phase().
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250204230558.712536-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Which shows that only 64-byte packets were redirected (1370624380864 /
21416005951 = 64).
Fixes: 380407023526 ("net/sched: Enable netdev drivers to update statistics of offloaded actions")
Reported-by: Joe Botha <joe@atomic.ac>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204123839.1151804-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY address is a dummy, because r8169 PHY access registers
don't support a PHY address. Therefore scan address 0 only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/830637dd-4016-4a68-92b3-618fcac6589d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add READ_ONCE() around reads of skb->dev->reg_state, because
this field can be changed from other threads/cpus.
Instead of calling dev_kfree_skb_irq() and kfree_skb()
while interrupts are masked and locks held,
use a temporary list and use __skb_queue_purge_reason()
Use SKB_DROP_REASON_DEV_READY drop reason to better
describe why these skbs are dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250204144825.316785-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The original Open Systems Adapter (OSA) was introduced by IBM in the
mid-90s. These were then superseded by OSA-Express in 1999 which used
Queued Direct IO to greatly improve throughput. The newer cards
retained the older, slower non-QDIO (OSE) modes for compatibility with
older systems. In Linux, the lcs driver was responsible for cards
operating in the older OSE mode and the qeth driver was introduced to
allow the OSA-Express cards to operate in the newer QDIO (OSD) mode.
For an S390 machine from 1998 or later, there is no reason to use the
OSE mode and lcs driver as all OSA cards since 1999 provide the faster
OSD mode. As a result, it's been years since we have heard of a
customer configuration involving the lcs driver.
This patch removes the lcs driver. The technology it supports has been
obsolete for past 25+ years and is irrelevant for current use cases.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204103135.1619097-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct ethtool_dump` is a flexible structure --a structure that
contains a flexible-array member.
Fix the following warning:
./drivers/net/ethernet/chelsio/cxgb4/cxgb4.h:1215:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Z6GBZ4brXYffLkt_@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cong Wang says:
====================
net_sched: two security bug fixes and test cases
This patchset contains two bug fixes reported in security mailing list,
and test cases for both of them.
====================
Link: https://patch.msgid.link/20250204005841.223511-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Integrate the test case provided by Mingi Cho into TDC.
All test results:
1..4
ok 1 ca5e - Check class delete notification for ffff:
ok 2 e4b7 - Check class delete notification for root ffff:
ok 3 33a9 - Check ingress is not searchable on backlog update
ok 4 a4b9 - Test class qlen notification
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-5-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list.
Fixes: f8d4bc455047 ("net/sched: netem: account for backlog updates from child qdisc")
Cc: Martin Ottens <martin.ottens@fau.de>
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When limit == 0, pfifo_tail_enqueue() must drop new packet and
increase dropped packets count of the qdisc.
All test results:
1..16
ok 1 a519 - Add bfifo qdisc with system default parameters on egress
ok 2 585c - Add pfifo qdisc with system default parameters on egress
ok 3 a86e - Add bfifo qdisc with system default parameters on egress with handle of maximum value
ok 4 9ac8 - Add bfifo qdisc on egress with queue size of 3000 bytes
ok 5 f4e6 - Add pfifo qdisc on egress with queue size of 3000 packets
ok 6 b1b1 - Add bfifo qdisc with system default parameters on egress with invalid handle exceeding maximum value
ok 7 8d5e - Add bfifo qdisc on egress with unsupported argument
ok 8 7787 - Add pfifo qdisc on egress with unsupported argument
ok 9 c4b6 - Replace bfifo qdisc on egress with new queue size
ok 10 3df6 - Replace pfifo qdisc on egress with new queue size
ok 11 7a67 - Add bfifo qdisc on egress with queue size in invalid format
ok 12 1298 - Add duplicate bfifo qdisc on egress
ok 13 45a0 - Delete nonexistent bfifo qdisc
ok 14 972b - Add prio qdisc on egress with invalid format for handles
ok 15 4d39 - Delete bfifo qdisc twice
ok 16 d774 - Check pfifo_head_drop qdisc enqueue behaviour when limit == 0
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expected behaviour:
In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a
packet in scheduler's queue and decrease scheduler's qlen by one.
Then, pfifo_tail_enqueue() enqueue new packet and increase
scheduler's qlen by one. Finally, pfifo_tail_enqueue() return
`NET_XMIT_CN` status code.
Weird behaviour:
In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a
scheduler that has no packet, the 'drop a packet' step will do nothing.
This means the scheduler's qlen still has value equal 0.
Then, we continue to enqueue new packet and increase scheduler's qlen by
one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by
one and return `NET_XMIT_CN` status code.
The problem is:
Let's say we have two qdiscs: Qdisc_A and Qdisc_B.
- Qdisc_A's type must have '->graft()' function to create parent/child relationship.
Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`.
- Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`.
- Qdisc_B is configured to have `sch->limit == 0`.
- Qdisc_A is configured to route the enqueued's packet to Qdisc_B.
Enqueue packet through Qdisc_A will lead to:
- hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B)
- Qdisc_B->q.qlen += 1
- pfifo_tail_enqueue() return `NET_XMIT_CN`
- hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A.
The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1.
Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem.
This violate the design where parent's qlen should equal to the sum of its childrens'qlen.
Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable.
Fixes: 57dbb2d83d10 ("sched: add head drop fifo queue")
Reported-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc166321f
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Attempts to replace an MDB group membership of the host itself are
currently bounced:
# ip link add name br up type bridge vlan_filtering 1
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
Error: bridge: Group is already joined by host.
A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.
The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.
Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some selftests need libynl.a. When building it try to skip
generating the ReST documentation, libynl.a does not depend
on them.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203214850.1282291-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antoine Tenart says:
====================
net-sysfs: remove the rtnl_trylock/restart_syscall construction
The series initially aimed at improving spins (and thus delays) while
accessing net sysfs under rtnl lock contention[1]. The culprit was the
trylock/restart_syscall constructions. There wasn't much interest at the
time but it got traction recently for other reasons (lowering the rtnl
lock pressure).
Since v1[2]:
- Do not export rtnl_lock_interruptible [Stephen].
- Add netdev_warn_once messages in rx_queue_add_kobject [Jakub].
Since the RFC[1]:
- Limit the breaking of the sysfs protection to sysfs_rtnl_lock() only
as this is not needed in the whole rtnl locking section thanks to the
additional check on dev_isalive(). This simplifies error handling as
well as the unlocking path.
- Used an interruptible version of rtnl_lock, as done by Jakub in
his experiments.
- Removed a WARN_ONCE_ONCE [Greg].
- Removed explicit inline markers [Stephen].
Most of the reasoning is explained in comments added in patch 1. This
was tested by stress-testing net sysfs attributes (read/write ops) while
adding/removing queues and adding/removing veths, all in parallel. I
also used an OCP single node cluster, spawning lots of pods.
[1] https://lore.kernel.org/all/20231018154804.420823-1-atenart@kernel.org/T/
[2] https://lore.kernel.org/all/20250117102612.132644-1-atenart@kernel.org/T/
====================
Link: https://patch.msgid.link/20250204170314.146022-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the commit removing remove rtnl_trylock from device
attributes we here apply the same technique to networking queues.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-5-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the (upcoming) removal of the rtnl_trylock/restart_syscall logic
and because of how Tx/Rx queues are implemented (and their
requirements), it might happen that a queue is re-added before having
the chance to be cleared. In such rare case, do not complete the queue
addition operation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-4-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rx/tx queues embed their own kobject for registering their per-queue
sysfs files. The issue is they're using the kobject default groups for
this and entirely rely on the kobject refcounting for releasing their
sysfs paths.
In order to remove rtnl_trylock calls we need sysfs files not to rely on
their associated kobject refcounting for their release. Thus we here
move queues sysfs files from the kobject default groups to their own
groups which can be removed separately.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-3-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is an ABBA deadlock between net device unregistration and sysfs
files being accessed[1][2]. To prevent this from happening all paths
taking the rtnl lock after the sysfs one (actually kn->active refcount)
use rtnl_trylock and return early (using restart_syscall)[3], which can
make syscalls to spin for a long time when there is contention on the
rtnl lock[4].
There are not many possibilities to improve the above:
- Rework the entire net/ locking logic.
- Invert two locks in one of the paths — not possible.
But here it's actually possible to drop one of the locks safely: the
kernfs_node refcount. More details in the code itself, which comes with
lots of comments.
Note that we check the device is alive in the added sysfs_rtnl_lock
helper to disallow sysfs operations to run after device dismantle has
started. This also help keeping the same behavior as before. Because of
this calls to dev_isalive in sysfs ops were removed.
[1] https://lore.kernel.org/netdev/49A4D5D5.5090602@trash.net/
[2] https://lore.kernel.org/netdev/m14oyhis31.fsf@fess.ebiederm.org/
[3] https://lore.kernel.org/netdev/20090226084924.16cb3e08@nehalam/
[4] https://lore.kernel.org/all/20210928125500.167943-1-atenart@kernel.org/T/
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250204170314.146022-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with Rust 1.86.0 (currently in nightly, to be released on
2025-04-03), the `missing_abi` lint is warn-by-default [1]:
error: extern declarations without an explicit ABI are deprecated
--> rust/doctests_kernel_generated.rs:3158:1
|
3158 | extern {
| ^^^^^^ help: explicitly specify the C ABI: `extern "C"`
|
= note: `-D missing-abi` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(missing_abi)]`
Thus clean it up.
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 7f8977a7fe6d ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Link: https://github.com/rust-lang/rust/pull/132397 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250121200934.222075-1-ojeda@kernel.org
[ Added 6.13.y to Cc: stable tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
There seems to have been merge skew between commit b2c261fa8629 ("rust:
kbuild: expand rusttest target for macros") and commit 0730422bced5
("rust: use host dylib naming convention to support macOS") ; the latter
replaced `libmacros.so` with `$(libmacros_name)` and the former added an
instance of `libmacros.so`. The former was not yet applied when the
latter was sent, resulting in a stray `libmacros.so`. Replace the stray
with `$(libmacros_name)` to allow `rusttest` to build on macOS.
Fixes: 0730422bced5 ("rust: use host dylib naming convention to support macOS")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250201-fix-mac-build-again-v1-1-ca665f5d7de7@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") added unnecessary strict handler address checks,
causing the PRM module to fail in translating memory error addresses.
Both static data buffer address and ACPI parameter buffer address may
be NULL if they are not needed, as described in section 4.1.2 PRM Handler
Information Structure of Platform Runtime Mechanism specification [1].
Here are two examples from real hardware:
----PRMT.dsl----
- staic data address is not used
[10Ch 0268 2] Revision : 0000
[10Eh 0270 2] Length : 002C
[110h 0272 16] Handler GUID : F6A58D47-E04F-4F5A-86B8-2A50D4AA109B
[120h 0288 8] Handler address : 0000000065CE51F4
[128h 0296 8] Satic Data Address : 0000000000000000
[130h 0304 8] ACPI Parameter Address : 000000006522A718
- ACPI parameter address is not used
[1B0h 0432 2] Revision : 0000
[1B2h 0434 2] Length : 002C
[1B4h 0436 16] Handler GUID : 657E8AE6-A8FC-4877-BB28-42E7DE1899A5
[1C4h 0452 8] Handler address : 0000000065C567C8
[1CCh 0460 8] Satic Data Address : 000000006113FB98
[1D4h 0468 8] ACPI Parameter Address : 0000000000000000
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-and-tested-by: Shi Liu <aurelianliu@tencent.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Reviewed-by: Koba Ko <kobak@nvidia.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20250126022250.3014210-1-aubrey.li@linux.intel.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While analysing code for software and OF node for the corner case when
caller asks to read zero items in the supposed to be an array of values
I found that ACPI behaves differently to what OF does, i.e.
1. It returns -EINVAL when caller asks to read zero items from integer
array, while OF returns 0, if no other errors happened.
2. It returns -EINVAL when caller asks to read zero items from string
array, while OF returns -ENODATA, if no other errors happened.
Amend ACPI implementation to follow what OF does.
Fixes: b31384fa5de3 ("Driver core: Unified device properties interface for platform firmware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250203194629.3731895-1-andriy.shevchenko@linux.intel.com
[ rjw: Added empty line after a conditional ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ensure cpufreq_driver->set_boost is non-NULL before using it in
cpufreq_online() to prevent a potential NULL pointer dereference.
Reported-by: Gautam Menghani <gautam@linux.ibm.com>
Closes: https://lore.kernel.org/all/c9e56c5f54cc33338762c94e9bed7b5a0d5de812.camel@linux.ibm.com/
Fixes: dd016f379ebc ("cpufreq: Introduce a more generic way to set default per-policy boost flag")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/20250205181347.2079272-1-aboorvad@linux.ibm.com
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Compile-testing without CONFIG_OF leads to a harmless build warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.
An earlier commit, b865a8404642 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.
Fix it properly.
Fixes: 84cf9e541ccc ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a8404642 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Passing 0 as the step only works when there are other reasons to break
out of the BPP loop in intel_dp_mtp_tu_compute_config(). Otherwise, an
infinite loop might occur. Fix it by explicitly checking for 0 step.
Fixes: ef0a0757bbea ("drm/i915/dp: compute config for 128b/132b SST w/o DSC")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://lore.kernel.org/r/Z6I0knh2Kt5T0JrT@ideak-desk.fi.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204154925.3001781-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a40e718d34d3d02c781c295466b013415f68c4f1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This patch provides the DT Schema description of:
- powertip,st7272 320 x 240 LCD display
- powertip,hx8238a 320 x 240 LCD display
Used with the different HW revisions of btt3 devices.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109154149.1212631-1-lukma@denx.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In adjust_perf() callback, we are setting the max_perf to highest_perf,
as opposed to the correct limit value i.e. max_limit_perf. Fix that.
Fixes: 3f7b835fa4d0 ("cpufreq/amd-pstate: Move limit updating code")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-3-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b73 ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb63838 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb63838 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
