Age | Commit message (Collapse) | Author |
|
Add an if condition for gfx activity because the scaling has been changed after smu fw version 5d4600.
And remove a warning log.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
|
|
Limit the max print event of trace_marker to just 4K string size. This must
also be less than the amount that can be held by a trace_seq along with
the text that is before the output (like the task name, PID, CPU, state,
etc). As trace_seq is made to handle large events (some greater than 4K).
Make the max size of a trace_marker write event be 4K which is guaranteed
to fit in the trace_seq buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240304223433.4ba47dff@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
PAGE_SIZE
The trace_seq buffer is used to print out entire events. It's typically
set to PAGE_SIZE * 2 as there's some events that can be quite large.
As a side effect, writes to trace_marker is limited by both the size of the
trace_seq buffer as well as the ring buffer's sub-buffer size (which is a
power of PAGE_SIZE). By limiting the trace_seq size, it also limits the
size of the largest string written to trace_marker.
trace_seq does not need to be dependent on PAGE_SIZE like the ring buffer
sub-buffers need to be. Hard code it to 8K which is PAGE_SIZE * 2 on most
architectures. This will also limit the size of trace_marker on those
architectures with greater than 4K PAGE_SIZE.
Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240304191342.56fb1087@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This reverts 60be76eeabb3d ("tracing: Add size check when printing
trace_marker output"). The only reason the precision check was added
was because of a bug that miscalculated the write size of the string into
the ring buffer and it truncated it removing the terminating nul byte. On
reading the trace it crashed the kernel. But this was due to the bug in
the code that happened during development and should never happen in
practice. If anything, the precision can hide bugs where the string in the
ring buffer isn't nul terminated and it will not be checked.
Link: https://lore.kernel.org/all/C7E7AF1A-D30F-4D18-B8E5-AF1EF58004F5@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240227125706.04279ac2@gandalf.local.home
Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240304174341.2a561d9f@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 60be76eeabb3d ("tracing: Add size check when printing trace_marker output")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block
Pull MD atomic queue limits changes from Song.
* tag 'md-6.9-20240306' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
|
|
As the chip selects can be configured through ACPI/OF/swnode, and
the set_cs() callback will only be called when a native chip select
is being used, there is no reason for the driver to only support the
native chip select as the first chip select. Remove the check that
introduces this limitation.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161004.2205113-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use source instead of ret, which seems to be unrelated and will always
be zero.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
disk_stack_limits is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-12-hch@lst.de
|
|
Just use the request_queue from the gendisk pointer in the relatively
few places that sill need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-11-hch@lst.de
|
|
Initial queue limits are now set from ->run. Remove the superfluous
initialization in md_alloc and level_store.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-10-hch@lst.de
|
|
Build the queue limits outside the queue and apply them using
queue_limits_set. To make the code more obvious also split the queue
limits handling into separate helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-9-hch@lst.de
|
|
Build the queue limits outside the queue and apply them using
queue_limits_set. To make the code more obvious also split the queue
limits handling into separate helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-8-hch@lst.de
|
|
Build the queue limits outside the queue and apply them using
queue_limits_set. To make the code more obvious also split the queue
limits handling into a separate helper function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-7-hch@lst.de
|
|
Build the queue limits outside the queue and apply them using
queue_limits_set. To make the code more obvious also split the queue
limits handling into a separate helper function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-6-hch@lst.de
|
|
Add a few helpers that wrap the block queue limits API for use in MD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-5-hch@lst.de
|
|
Add a helper to check for a DM-mapped MD device instead of using
the obfuscated ->gendisk or ->queue NULL checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-4-hch@lst.de
|
|
Add a small wrapper around blk_add_trace_msg that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-3-hch@lst.de
|
|
Add a helper to trace bio remapping that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-2-hch@lst.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Get rid of copy_mc flag in iov_iter which really only makes sense for
the core dumping code so move it out of the generic iov iter code and
make it coredump's problem. See the detailed commit description.
- Revert fs/aio: Make io_cancel() generate completions again
The initial fix here was predicated on the assumption that calling
ki_cancel() didn't complete aio requests. However, that turned out to
be wrong since the two drivers that actually make use of this set a
cancellation function that performs the cancellation correctly. So
revert this change.
- Ensure that the test for IOCB_AIO_RW always happens before the read
from ki_ctx.
* tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: get rid of 'copy_mc' flag
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
Revert "fs/aio: Make io_cancel() generate completions again"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm
support, sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero
2w device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor
regression in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig
change"
* tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: Fix over-requested allocation size
tee: optee: Fix kernel panic caused by incorrect error handling
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix potential use-after-frees in rk3288 and sun8i-ce"
* tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rk3288 - Fix use after free in unprepare
crypto: sun8i-ce - Fix use after free in unprepare
|
|
bcache currently calculates the stripe size for the non-cached_dev
case directly in bcache_device_init, but for the cached_dev case it does
it in the caller. Consolidate it in one places, which also enables
setting the io_opt queue_limit before allocating the gendisk so that it
can be passed in instead of changing the limit just after the allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240226104826.283067-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In virtblk_read_zoned_limits(), setting a zoned block device maximum
number of open and active zones using the functions
disk_set_max_open_zones() and disk_set_max_active_zones() is incorrect
as setting the limits for the request queue is now done atomically when
the gendisk is created (with blk_mq_alloc_disk()). The value set by the
disk_set_max_open/active_zones() functions will be overwritten.
Fix this by setting the maximum number of open and active zones directly
in the queue_limits structure passed to virtblk_read_zoned_limits().
Fixes: 8b837256560c ("virtio_blk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240301192639.410183-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd93 ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 6d4e80db4ebe ("block: add capacity validation in
bdev_add_partition()") add check of partition's start and end sectors to
prevent exceeding the size of the disk when adding partitions. However,
there is still no check for resizing partitions now.
Move the check to blkpg_do_ioctl() to cover resizing partitions.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305032132.548958-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch drbd_reconsider_queue_parameters to set up the queue parameters
in an on-stack queue_limits structure and apply the atomically. Remove
various helpers that have become so trivial that they can be folded into
drbd_reconsider_queue_parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to check if discard is supported for a given connection /
backing device combination.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-7-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fixup_write_zeroes always overrides the max_write_zeroes_sectors value
a little further down the callchain, so don't bother to setup a limit
in decide_on_discard_support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-6-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
drbd_setup_queue_param is only called by drbd_reconsider_queue_parameters
and there is no really clear boundary of responsibilities between the
two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-5-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a drbd_backing_dev_max_segments helper that checks the
backing device limitation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-4-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out a drbd_max_peer_bio_size helper for the peer I/O size,
and condense the various checks to a nested min3(..., max())) instead
of using a lot of local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits structure with the max_hw_sectors limit to
blk_alloc_disk instead of updating the limit on the allocated gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret variable in the function has not yet been effective and can be
removed.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240306101444.1244-1-kunyu@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ret is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240306100659.106521-1-kunyu@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
err is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20240306100216.69340-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
error is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20240306095608.26839-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the block_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305-class_cleanup-block-v1-1-130bb27b9c72@marliere.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block
Pull MD fixes from Song:
"This set fixes two issues:
1. dmraid regression since 6.7 kernels. This issue was initially
reported in [1]. This set of fix has been reviewed and tested by
md and dm folks.
2. raid5 hang since 6.7 kernel, reported in [2]. We haven't got a
better fix for this issue yet. This revert is a workaround. It has
been applied to 6.7 stable kernels [3], and proved to be affective.
We will look more into this issue for a better fix.
[1] https://lore.kernel.org/linux-raid/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
[2] https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
[3] 87165c64fe1a in linux-6.7.y branch."
* tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
dm-raid: fix lockdep waring in "pers->hot_add_disk"
dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
dm-raid: add a new helper prepare_suspend() in md_personality
md/dm-raid: don't call md_reap_sync_thread() directly
dm-raid: really frozen sync_thread during suspend
md: add a new helper reshape_interrupted()
md: export helper md_is_rdwr()
md: export helpers to stop sync_thread
md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
|
|
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot
flag there as well, and then use the commit API to change the transfer
size and logical block size dependent values.
This relies on the assumption that no I/O can be pending before the
devices moves into the ready state and doesn't need extra freezing
for changes to the queue limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most of the code in setup_blk_queue is shared between all disciplines.
Move it to common code and leave a method to query the maximum number
of transferable blocks, and a flag to indicate discard support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reflow dasd_state_basic_to_ready a bit to make it easier to modify.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix an incorrect number of pages being released for buffers that do not
start at the beginning of a page.
Fixes: 1b151e2435fc ("block: Remove special-casing of compound pages")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Tested-by: Greg Edwards <gedwards@ddn.com>
Link: https://lore.kernel.org/r/86e592a9-98d4-4cff-a646-0c0084328356@cybernetics.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 95bf25bb9ed5dedb7fb39f76489f7d6843ab0475.
Apparently there was a previous discussion about emulation of formats
and it was decided XRGB8888 was the only format to support for legacy
userspace [1]. Remove ARGB8888. Userspace needs to be fixed to accept
XRGB8888.
[1] https://lore.kernel.org/r/60dc7697-d7a0-4bf4-a22e-32f1bbb792c2@suse.de
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306063721.1.I4a32475190334e1fa4eef4700ecd2787a43c94b5@changeid
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
Move registration of the typec switch to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
This could potentially also trigger a bug in the DRM bridge
implementation which does not expect bridges to go away even if device
links may avoid triggering this (when enabled).
Move registration of the DRM aux bridge to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE")
Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The memory allocated for the identification is freed on failure. Set
it to NULL so the caller doesn't have a pointer to that freed address.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When nvme_identify_ns() fails, it frees the pointer to the struct
nvme_id_ns before it returns. However, ns_update_nuse() calls kfree()
for the pointer even when nvme_identify_ns() fails. This results in
KASAN double-free, which was observed with blktests nvme/045 with
proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by
skipping kfree() when nvme_identify_ns() fails.
Link: https://lore.kernel.org/linux-block/20240304161303.19681-1-dwagner@suse.de/ [1]
Fixes: a1a825ab6a60 ("nvme: add csi, ms and nuse to sysfs")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|