| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
|
|
|
|
Two problems exist in the current i.MX5 pm suspend/resume and idle
functions. The first is the current i.MX5 suspend routine will call
tzic_enable_wake(1) to set wake source, this will set all enabled
irq as wake source rather than those wake capable. The second
is i.MX5 idle will call mx5_cpu_lp_set() to prepare enter low power
mode, but it forgets to call wfi instruction to enter this mode.
To fix these two problems, using generic irq chip pm interface and
modify function imx5_idle().
[Tested by Shawn Guo on imx51 babbage board.
Tested by Hui Wang on imx51 pdk board.]
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
This patch adds the match that allows to perform extended
accounting. It requires the new nfnetlink_acct infrastructure.
# iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic
# iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We currently have two ways to account traffic in netfilter:
- iptables chain and rule counters:
# iptables -L -n -v
Chain INPUT (policy DROP 3 packets, 867 bytes)
pkts bytes target prot opt in out source destination
8 1104 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
- use flow-based accounting provided by ctnetlink:
# conntrack -L
tcp 6 431999 ESTABLISHED src=192.168.1.130 dst=212.106.219.168 sport=58152 dport=80 packets=47 bytes=7654 src=212.106.219.168 dst=192.168.1.130 sport=80 dport=58152 packets=49 bytes=66340 [ASSURED] mark=0 use=1
While trying to display real-time accounting statistics, we require
to pool the kernel periodically to obtain this information. This is
OK if the number of flows is relatively low. However, in case that
the number of flows is huge, we can spend a considerable amount of
cycles to iterate over the list of flows that have been obtained.
Moreover, if we want to obtain the sum of the flow accounting results
that match some criteria, we have to iterate over the whole list of
existing flows, look for matchings and update the counters.
This patch adds the extended accounting infrastructure for
nfnetlink which aims to allow displaying real-time traffic accounting
without the need of complicated and resource-consuming implementation
in user-space. Basically, this new infrastructure allows you to create
accounting objects. One accounting object is composed of packet and
byte counters.
In order to manipulate create accounting objects, you require the
new libnetfilter_acct library. It contains several examples of use:
libnetfilter_acct/examples# ./nfacct-add http-traffic
libnetfilter_acct/examples# ./nfacct-get
http-traffic = { pkts = 000000000000, bytes = 000000000000 };
Then, you can use one of this accounting objects in several iptables
rules using the new nfacct match (which comes in a follow-up patch):
# iptables -I INPUT -p tcp --sport 80 -m nfacct --nfacct-name http-traffic
# iptables -I OUTPUT -p tcp --dport 80 -m nfacct --nfacct-name http-traffic
The idea is simple: if one packet matches the rule, the nfacct match
updates the counters.
Thanks to Patrick McHardy, Eric Dumazet, Changli Gao for reviewing and
providing feedback for this contribution.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create()
drm/radeon/kms: bail on BTC parts if MC ucode is missing
|
|
Aim of this patch is to provide full range of rps_flow_cnt on 64bit arches.
Theorical limit on number of flows is 2^32
Fix some buggy RPS/RFS macros as well.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
CC: Xi Wang <xi.wang@gmail.com>
CC: Laurent Chavey <chavey@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
commit 6373a9a286 (netem: use vmalloc for distribution table) added a
regression, since vfree() is called while holding a spinlock and BH
being disabled.
Fix this by doing the pointers swap in critical section, and freeing
after spinlock release.
Also add __GFP_NOWARN to the kmalloc() try, since we fallback to
vmalloc().
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes one scheduling while atomic error:
[ 385.565186] ctnetlink v0.93: registering with nfnetlink.
[ 385.565349] BUG: scheduling while atomic: lt-expect_creat/16163/0x00000200
It can be triggered with utils/expect_create included in
libnetfilter_conntrack if the FTP helper is not loaded.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This fixes one bogus error that is returned to user-space:
libnetfilter_conntrack/utils# ./expect_get
TEST: get expectation (-1)(Unknown error 18446744073709551504)
This patch includes the correct handling for EAGAIN (nfnetlink
uses this error value to restart the operation after module
auto-loading).
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The get and zero operations have to be done in an atomic context,
otherwise counters added between them will be lost.
This problem was spotted by Changli Gao while discussing the
nfacct infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The merge of m68knommu left the linker scripts a little disorganized.
Some consistent naming and squashing two of scripts that just include
others can simplify things a lot.
So merge the two simple including scripts, and rename the nommu script
to be consistent with the existing m68k linker scripts.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
The code that used the anchor.h include file has long been removed from
the kernel. Remove it too.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
There is a race on reading the ColdFire slice timer current count and the
total clock count so far. Interrupts are off, and we may have just missed
getting a new timer wrap event interrupt. Check for this and adjust the
cycle count and current read count accordingly.
Also the slice timer counts down from the terminal count. So in read_clk()
we need take the current clock count away from the terminal count.
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
Disbale the CPU cache really early in the ColdFire startup code. We set
up some variables for RAM sizing and we want to make they stick in RAM.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
The traditional 68000 processors and the newer reduced instruction set
ColdFire processors do not support the 32*32->64 multiply or the 64/32->32
divide instructions. This is not a difference based on the presence of
a hardware MMU or not.
Create a new config symbol to mark that a CPU type doesn't support the
longer multiply/divide instructions. Use this then as a basis for using
the fast 64bit based divide (in div64.h) and for linking in the extra
libgcc functions that may be required (mulsi3, divsi3, etc).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
We have two implementations of the IP checksuming code for the m68k arch.
One uses the more advanced instructions available in 68020 and above
processors, the other uses the simpler instructions available on the
original 68000 processors and the modern ColdFire processors.
This simpler code is pretty much the same as the generic lib implementation
of the IP csum functions. So lets just switch over to using that. That
means we can completely remove the checksum_no.c file, and only have the
local fast code used for the more complex 68k CPU family members.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
There is no reason we can't make the saved fp registers the same for all
m68k types and ColdFire. There is a little wasted space, but the code
consistency and cleanliness is a big win.
sigcontext.h is an exported header, but currently there is no in-mainline
users of the !__uClinux__ and __mcoldfire__ case that this change effects.
Even better this change actually makes this structure consistent with
the out-of-mainline ColdFire/MMU code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Commit 61619b12078dc8b85a3d4cbfa16f650daa341bd1 ("m68k: merge mmu and
non-mmu include/asm/entry.h files") made the trap entry code basically
the same for mmu and non-mmu builds. This means we no longer need code
to mark the stack frame as "system-call" type or other in the non-mmu
trap handling entry points. This is done in the SAVE_ALL_INT macro now.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
The non-MMU builds of m68k allow a fixed kernel boot command line to
be configured at configure time. Allow this MMU builds as well.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
Output a table of the kernel memory regions at boot time.
This is taken directly from the ARM architecture code that does this.
The table looks like this:
Virtual kernel memory layout:
vector : 0x00000000 - 0x00000400 ( 0 KiB)
kmap : 0xd0000000 - 0xe0000000 ( 256 MiB)
vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB)
lowmem : 0x00000000 - 0x02000000 ( 32 MiB)
.init : 0x00128000 - 0x00134000 ( 48 KiB)
.text : 0x00020000 - 0x00118d54 ( 996 KiB)
.data : 0x00118d60 - 0x00126000 ( 53 KiB)
.bss : 0x00134000 - 0x001413e0 ( 53 KiB)
This has been very useful while debugging the ColdFire virtual memory
support code. But in general I think it is nice to know extacly where
the kernel has layed everything out on boot.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
The mach_gettod function pointer is only called from the time_no.c
code. So move its actual definition to there too. It is currently in
setup_no.c for no particularly good reason.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
The selection of the CONFIG_GENERIC_ATOMIC64 option is not specific to the
MMU being present and enabled. It is a property of certain CPU families.
So select it based on those CPU types being selected.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
Currently on m68k we have a comeplete thread_info structure stored inside
of the thread_struct, and we also have it in the initial part of the kernel
stack. Mostly the code currently uses the one inside of the thread_struct,
only using the "task" pointer from the stack based one.
This is wasteful and confusing, we should only have the single instance of
thread_info inside the stack page. And this is the norm for all other
architectures.
This change makes m68k handle thread_info consistently on both MMU enabled
and non-MMU setups.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
We have a duplicate name and definition for the offset of the thread.info
struct within the task struct in our asm-offsets.c code. Remove one of them,
and consolidate to use a single define, TASK_INFO.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The init_task code can be the same for both mmu and non-mmu targets.
None of the alignment carried out in the the current init_task code
is necessary. The linker script takes care of aligning the init_thread
structure to a THREAD SIZE boundary, and that is all we need.
So use the init_task.c code for all target types, that makes m68k
code consistent with what most other architectures do.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
The fasthandler code was removed long ago. Remove the now unused
declaration of it.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
gpiolib provides __gpio_to_irq() to map gpiolib gpios to interrupts - hook
that up on m68k.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
Updated to merge the valid bits of the two m68k patches.
This converts the m86k clocksources to use clocksource_register_hz/khz
This is untested, so any assistance in testing would be appreciated!
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
|
|
This will improve the output of the sensor.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
This also changes the devname parameter delivered to
request_threaded_irq() from "mpu_int" to "mpu3050".
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
Adding invn,mpu3050 as the initial id.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Fix race between CPU hotplug and lglocks
|
|
for linus: writeback reason binary tracing format fix
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: show writeback reason with __print_symbolic
|
|
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Angus Ainslie <angus.ainslie@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: adapt update-po-config to new UML layout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: call d_instantiate after all ops are setup
Btrfs: fix worker lock misuse in find_worker
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The defconfig for the Integrator only include the serial drivers
for the PL010 as found in the Integrator/AP, to make sure we
don't loose the serial console we simply select both PL010 and
PL011 drivers from the Integrator Kconfig entries so they are
always included when applicable.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
We don't need to hardcode the peripheral IDs for the Integrator/CP,
the numbers found in the hardware are correct anyway.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: xt_connbytes: handle negation correctly
net: relax rcvbuf limits
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
net: introduce DST_NOPEER dst flag
mqprio: Avoid panic if no options are provided
bridge: provide a mtu() method for fake_dst_ops
|
|
Add a req_running field to the pl330_thread to track which request (if
any) has been submitted to the DMA. This mechanism replaces the old
one in which we tried to guess the same by looking at the PC of the
DMA, which could prevent the driver from sending more requests if it
didn't guess correctly.
Reference: <1323631637-9610-1-git-send-email-javi.merino@arm.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Tested-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h. We can't remove gpio.h yet as asm/gpio.h still
includes it.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
