summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-04RDMA/nes: Change MDIO bus clock to 2.5MHzTatyana Nikolova
Change the PHY clock divisor to make the MDIO clock 2.5MHz, instead of 3.5MHz (which is out of spec). Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04cgroup: move assignement out of condition in cgroup_attach_proc()Dan Carpenter
Gcc complains about this: "kernel/cgroup.c:2179:4: warning: suggest parentheses around assignment used as truth value [-Wparentheses]" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-01-04x86: Fix atomic64_xxx_cx8() functionsEric Dumazet
It appears about all functions in arch/x86/lib/atomic64_cx8_32.S are wrong in case cmpxchg8b must be restarted, because LOCK_PREFIX macro defines a label "1" clashing with other local labels : 1: some_instructions LOCK_PREFIX cmpxchg8b (%ebp) jne 1b / jumps to beginning of LOCK_PREFIX ! A possible fix is to use a magic label "672" in LOCK_PREFIX asm definition, similar to the "671" one we defined in LOCK_PREFIX_HERE. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jan Beulich <JBeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1325608540.2320.103.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04x86: Fix and improve cmpxchg_double{,_local}()Jan Beulich
Just like the per-CPU ones they had several problems/shortcomings: Only the first memory operand was mentioned in the asm() operands, and the 2x64-bit version didn't have a memory clobber while the 2x32-bit one did. The former allowed the compiler to not recognize the need to re-load the data in case it had it cached in some register, while the latter was overly destructive. The types of the local copies of the old and new values were incorrect (the types of the pointed-to variables should be used here, to make sure the respective old/new variable types are compatible). The __dummy/__junk variables were pointless, given that local copies of the inputs already existed (and can hence be used for discarded outputs). The 32-bit variant of cmpxchg_double_local() referenced cmpxchg16b_local(). At once also: - change the return value type to what it really is: 'bool' - unify 32- and 64-bit variants - abstract out the common part of the 'normal' and 'local' variants Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F01F12A020000780006A19B@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04Merge commit 'v3.2-rc7' into x86/asmIngo Molnar
Merge reason: Update from -rc4 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04[CIFS] default ntlmv2 for cifs mount delayed to 3.3Steve French
Turned out the ntlmv2 (default security authentication) upgrade was harder to test than expected, and we ran out of time to test against Apple and a few other servers that we wanted to. Delay upgrade of default security from ntlm to ntlmv2 (on mount) to 3.3. Still works fine to specify it explicitly via "sec=ntlmv2" so this should be fine. Acked-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
2012-01-04Kconfig: acpi: Fix typo in comment.Justin P. Mattock
The below fixes a typo I found in a comment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-04Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2012-01-03IB/cm: Fix layout of APR messageEli Cohen
Add a missing 16-bit reserved field between ap_status and info fields. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoEOr Gerlitz
For IBoE, SLs 0-7 are mapped to Ethernet 802.1Q user priority bits (pbits) which are part of the VLAN tag, SLs 8-15 are reserved. Under Ethernet, the ConnectX firmware treats (decode/encode) the four bit SL field in various constructs such as QPC / UD WQE / CQE as PPP0 and not as 0PPP. This correlates well to the fact that within the vlan tag the pbits are located in bits 15-13 and not 12-14. The current code wasn't consistent around that area - the encoding was correct for the IBoE QPC.path.schedule_queue field, but was wrong for IBoE CQEs and when MLX header was built. These inconsistencies resulted in wrong SL <--> wire 802.1Q pbits mapping, which is fixed by using SL <--> PPP0 all around the place. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Default some module parameters optimallyMike Marciniszyn
Minimize the need for users to have to set module parameters to get good performance. The following two parameters are changed: - rcvhdrcnt to twice the rcvegrcnt - pcie_caps=0x51 The rcvhdrcnt at twice the egrcount allows the preemptive NAK code during reception to function in 100% of the cases rather than a sender jiffies-based timeout. The pcie_caps default of 0x51 will set the proposed MaxPayload and MaxReceiveReqest to 256 and 4096 respectively. The capabilities on the root complex will be used to limit those values. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Optimize locking for get_txreq()Mike Marciniszyn
The current code locks the QP s_lock, followed by the pending_lock, I guess to to protect against the allocate failing. This patch only locks the pending_lock, assuming that the empty case is an exeception, in which case the pending_lock is dropped, and the original code is executed. This will save a lock of s_lock in the normal case. The observation is that the sdma descriptors will deplete at twice the rate of txreq's, so this should be rare. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Fix a possible data corruption when receiving packetsRam Vepa
Prevent a receive data corruption by ensuring that the write to update the rcvhdrheadn register to generate an interrupt is at the very end of the receive processing. Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Eliminate 64-bit jiffies useMike Marciniszyn
The qib driver makes use of the the 64-bit jiffies API. Code inspection reveals that that version of the API is not really required. This patch converts to use the "normal" jiffies. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Fix style issuesMike Marciniszyn
More style issues revealed with checkpatch.pl -f. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/uverbs: Protect QP multicast listEli Cohen
Userspace verbs multicast attach/detach operations on a QP are done while holding the rwsem of the QP for reading. That's not sufficient since a reader lock allows more than one reader to acquire the lock. However, multicast attach/detach does list manipulation that can corrupt the list if multiple threads run in parallel. Fix this by acquiring the rwsem as a writer to serialize attach/detach operations. Add idr_write_qp() and put_qp_write() to encapsulate this. This fixes oops seen when running applications that perform multicast joins/leaves. Reported by: Mike Dubman <miked@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03vfs: trim includes a bitAl Viro
[folded fix for missing magic.h from Tetsuo Handa] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch mnt_namespace ->root to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: take /proc/*/mounts and friends to fs/proc_namespace.cAl Viro
rationale: that stuff is far tighter bound to fs/namespace.c than to the guts of procfs proper. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: opencode mntget() mnt_set_mountpoint()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - remaining argument of next_mnt()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: move fsnotify junk to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: move mnt_devnameAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: move mnt_list to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: switch pnode.h macros to struct mount *Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: move the rest of int fields to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: mnt_id/mnt_group_id movedAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: mnt_ns moved to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - mntput_no_expireAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - do_add_mount and graft_treeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: take mnt_share/mnt_slave/mnt_slave_list and mnt_expire to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: and now we can make ->mnt_master point to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: take mnt_master to struct mountAl Viro
make IS_MNT_SLAVE take struct mount * at the same time Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - remaining argument of mnt_set_mountpoint()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - propagate_mnt()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - shared subtree iteratorsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - get_dominating_id / do_make_slaveAl Viro
next pile of horrors, similar to mnt_parent one; this time it's mnt_master. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: take mnt_child/mnt_mounts to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: all counters taken to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - work with countersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: move mnt_mountpoint to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: now it can be done - make mnt_parent point to struct mountAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: mnt_parent moved to struct mountAl Viro
the second victim... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - is_path_reachableAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - mnt_has_parentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - do_umount/propagate_mount_busyAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount mnt_set_mountpoint child argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: spread struct mount - clone_mnt/copy_tree argumentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>