summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-28mlxsw: spectrum: Dump LAG FDB records only onceIdo Schimmel
LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Use correct netdev when notifying bridgeIdo Schimmel
LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a440887 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't report VLAN for 802.1D FDB entriesIdo Schimmel
When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a732018d8e ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Notify bridge's FDB only based on learning_syncIdo Schimmel
When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d76639 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Disable learning according to STP stateIdo Schimmel
When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Don't forward packets when STP state is DISABLEDIdo Schimmel
When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Flush FDB when leaving bridgeIdo Schimmel
As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: reg: Add the Switch Filtering DB Flush registerIdo Schimmel
When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28mlxsw: spectrum: Handle port leaving LAG while bridgedIdo Schimmel
It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28spi: atmel: fix gpio chip-select in case of non-DT platformCyrille Pitchen
The non-DT platform that uses this driver (actually the AVR32) was taking a bad branch for determining if the IP would use gpio for CS. Adding the presence of DT as a condition fixes this issue. Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller") Reported-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: extract from ml discussion] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-01-28perf: Fix race in perf_event_exit_task_context()Peter Zijlstra
There is a race between perf_event_exit_task_context() and orphans_remove_work() which results in a use-after-free. We mark ctx->task with TASK_TOMBSTONE to indicate a context is 'dead', under ctx->lock. After which point event_function_call() on any event of that context will NOP A concurrent orphans_remove_work() will only hold ctx->mutex for the list iteration and not serialize against this. Therefore its possible that orphans_remove_work()'s perf_remove_from_context() call will fail, but we'll continue to free the event, with the result of free'd memory still being on lists and everything. Once perf_event_exit_task_context() gets around to acquiring ctx->mutex it too will iterate the event list, encounter the already free'd event and proceed to free it _again_. This fails with the WARN in free_event(). Plug the race by having perf_event_exit_task_context() hold ctx::mutex over the whole tear-down, thereby 'naturally' serializing against all other sites, including the orphan work. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: alexander.shishkin@linux.intel.com Cc: dsahern@gmail.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/20160125130954.GY6357@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-28perf: Fix orphan holePeter Zijlstra
We should set event->owner before we install the event, otherwise there is a hole where the target task can fork() and we'll not inherit the event because it thinks the event is orphaned. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-28drm/i915: Fix intel_tile_width() parametersVille Syrjälä
The fb_modifiers and cpp arguments passed to intel_tile_width() in intel_fill_fb_ggtt_view() got accidentally swapped around. I'm pretty sure I fixed this already, but could be I lost the fix accidentally during some rebases or something. Anyway, fix it up for real. Fixes: d9b3288ecf2f ("drm/i915: change intel_fill_fb_ggtt_view() to use the real tile size") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-8-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_rotation_crc/primary-rotation-90 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org
2016-01-28drm/i915: Standardize on 'cpp' for bytes per pixelVille Syrjälä
We more or less randomly call the "bytes per pixel" value 'cpp', 'bytes_per_pixel', 'pixel_size', or even 'bpp'. Let's just pick one and stick to it. I've chosen 'cpp'. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-6-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28drm/i915: Make display gtt offsets u32Ville Syrjälä
Using 'unsigned long' for ggtt offsets doesn't make much sense. Use 'u32' instead since we've not yet seen a >4GiB ggtt. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-5-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28drm/i915: Pass rotation_info to intel_rotate_fb_obj_pages()Ville Syrjälä
intel_rotate_fb_obj_pages() doens't need the entire gtt view, just the rotation info suffices. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28drm/i915: Pass stride to rotate_pages()Ville Syrjälä
Pass stride in addition to width and height to rotate_pages(). For now width and stride are the same, but once framebuffer offsets enter the scene that may no longer be the case. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28drm/i915: Rename the rotated gtt view member to 'rotated'Ville Syrjälä
Also rename 'rotation_info' to 'rotated' to match the view type exactly, this should avoid confusion which union members is valid for each view type. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28Fix pointer tests in error-handling pathsDave Gordon
In the error-handling paths of i915_gem_do_execbuffer() and intel_crtc_page_flip(), the local pointer-to-request variables were expected to be either valid pointers or NULL. Since 2682708 drm/i915: simplify allocation of driver-internal requests they could also be ERR_PTR() values, so the tests need to be updated to accommodate this case. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453978089-29127-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-01-28drm/i915: Fix premature LRC unpin in GuC modeTvrtko Ursulin
In GuC mode LRC pinning lifetime depends exclusively on the request liftime. Since that is terminated by the seqno update that opens up a race condition between GPU finishing writing out the context image and the driver unpinning the LRC. To extend the LRC lifetime we will employ a similar approach to what legacy ringbuffer submission does. We will start tracking the last submitted context per engine and keep it pinned until it is replaced by another one. Note that the driver unload path is a bit fragile and could benefit greatly from efforts to unify the legacy and exec list submission code paths. At the moment i915_gem_context_fini has special casing for the two which are potentialy not needed, and also depends on i915_gem_cleanup_ringbuffer running before itself. v2: * Move pinning into engine->emit_request and actually fix the reference/unreference logic. (Chris Wilson) * ring->dev can be NULL on driver unload so use a different route towards it. v3: * Rebase. * Handle the reset path. (Chris Wilson) * Exclude default context from the pinning - it is impossible to get it right before default context special casing in general is eliminated. v4: * Rebased & moved context tracking to intel_logical_ring_advance_and_submit. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Issue: VIZ-4277 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nick Hoath <nicholas.hoath@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453976997-25424-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-01-28drm/i915: Extract context unpinning to its own functionTvrtko Ursulin
Will enable cleaner implementation of a following fix and easier code unification in the future. Idea and code by Chris Wilson. v2: Do not return before last_contexts on engines are unpinned. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk>
2016-01-28drm/i915: Make LRC pinning own a reference to the contextTvrtko Ursulin
Will simplify the following fix and sounds logical. v2: Add some whitespace to separate logic better. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nick Hoath <nicholas.hoath@intel.com>
2016-01-28drm/i915: Make LRC (un)pinning work on context and engineTvrtko Ursulin
Previously intel_lr_context_(un)pin were operating on requests which is in conflict with their names. If we make them take a context and an engine, it makes the names make more sense and it also makes future fixes possible. v2: Rebase for default_context/kernel_context change. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nick Hoath <nicholas.hoath@intel.com>
2016-01-28drm/amdgpu: only move pt bos in LRU list on successNicolai Hähnle
This fixes a race condition in the error case: since the pt bos have not necessarily been reserved in case of an error, we could move a pt bo that is currently in the middle of being evicted/moved by another process, which then resulted in a BUG_ON in ttm_bo_add_to_lru. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-28Merge tag 'usb-serial-4.5-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.5-rc2 Here are two fixes of crashes in the visor driver that could be triggered using bad (malicious) descriptors, a fix for two memory leaks in the new mxu11x0 driver, and an interface-blacklist fix for the option driver. Included are also some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-28powerpc/mm: Fixup _HPAGE_CHG_MASKAneesh Kumar K.V
This was wrongly updated by commit 7aa9a23c69ea ("powerpc, thp: remove infrastructure for handling splitting PMDs") during the last merge window. Fix it up. This could lead to incorrect behaviour in THP and/or mprotect(), at a minimum. Fixes: 7aa9a23c69ea ("powerpc, thp: remove infrastructure for handling splitting PMDs") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-28powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8Madhavan Srinivasan
Commit 7a7868326d77 ("powerpc/perf: Add an explict flag indicating presence of SLOT field") introduced the PPMU_HAS_SSLOT flag to remove the assumption that MMCRA[SLOT] was present when PPMU_ALT_SIPR was not set. That commit's changelog also mentions that Power8 does not support MMCRA[SLOT]. However when the Power8 PMU support was merged, it errnoeously included the PPMU_HAS_SSLOT flag. So remove PPMU_HAS_SSLOT from the Power8 flags. mpe: On systems where MMCRA[SLOT] exists, the field occupies bits 37:39 (IBM numbering). On Power8 bit 37 is reserved, and 38:39 overlap with the high bits of the Threshold Event Counter Mantissa. I am not aware of any published events which use the threshold counting mechanism, which would cause the mantissa bits to be set. So in practice this bug is unlikely to trigger. Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-28drm/amdkfd: Remove unnecessary cast in kfreeAmitoj Kaur Chawla
Remove an unnecassary cast in the argument to kfree. Found using Coccinelle. The semantic patch used to find this is as follows: //<smpl> @@ type T; expression *f; @@ - kfree((T *)(f)); + kfree(f); //</smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2016-01-28drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()Colin Ian King
amdgpu_amdkfd_gfx_7_get_functions and amdgpu_amdkfd_gfx_8_0_get_functions have no parameters, so use the normal void parameter convention to make them match their prototypes in the header file drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2016-01-28pinctrl: nomadik: hide unused functionsArnd Bergmann
The nomadik pinctrl driver has two functions that are only used for debugfs output and are otherwise unused: drivers/pinctrl/nomadik/pinctrl-abx500.c:194:12: error: 'abx500_get_pull_updown' defined but not used drivers/pinctrl/nomadik/pinctrl-abx500.c:471:12: error: 'abx500_get_mode' defined but not used This makes the function definitions conditional to avoid the harmless warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-28drm/i915: Fix VCS ring selection after uapi decouplingTvrtko Ursulin
This got broken in: commit de1add360522c876c25ef2bbbbab1c94bdb509ab Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Fri Jan 15 15:12:50 2016 +0000 drm/i915: Decouple execbuf uAPI from internal implementation BSD ring flags need to be shifted before they can be considered indices into the ring array. Reported by Zhipeng Gong. v2: Simplify the code. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1453902069-31353-1-git-send-email-tvrtko.ursulin@linux.intel.com Testcase: igt/gem_exec_basic # bdw-gt3
2016-01-28drm/vmwgfx: fix a NULL dereferenceDan Carpenter
We dereference "eaction->event" inside the call to drm_send_event_locked() so should hold off on setting it to NULL until afterward. Fixes: fb740cf2492c ("drm: Create drm_send_event helpers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160128090646.GA5824@mwanda Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-28ARM: dts: imx6: remove bogus interrupt-parent from CAAM nodeLucas Stach
The interrupt-parent property is not needed as it is inherited from the parent bus and in the case of the CAAM node actively points to the wrong interrupt controller (GIC instead of GPC). This leads to the CAAM IRQs not getting unmasked at the GPC level, leaving them unable to wake the CPU from wait mode, potentially impacting performance of the CAAM unit when CPUidle is enabled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-28ALSA: dummy: Disable switching timer backend via sysfsTakashi Iwai
ALSA dummy driver can switch the timer backend between system timer and hrtimer via its hrtimer module option. This can be also switched dynamically via sysfs, but it may lead to a memory corruption when switching is done while a PCM stream is running; the stream instance for the newly switched timer method tries to access the memory that was allocated by another timer method although the sizes differ. As the simplest fix, this patch just disables the switch via sysfs by dropping the writable bit. BugLink: http://lkml.kernel.org/r/CACT4Y+ZGEeEBntHW5WHn2GoeE0G_kRrCmUh6=dWyy-wfzvuJLg@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-28ALSA: timer: fix SND_PCM_TIMER Kconfig textRandy Dunlap
Fix spelling and typos for SND_PCM_TIMER. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-27hwmon: (fam15h_power) Add bit masking for tdp_limitGioh Kim
Add bit masking to read ApmTdpLimit precisely Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-27NFS: Cleanup - rename NFS_LAYOUT_RETURN_BEFORE_CLOSETrond Myklebust
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a layoutreturn is needed, either due to a layout recall or to a layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order to clarify its purpose. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-01-27Input: vmmouse - fix absolute device registrationDmitry Torokhov
We should set device's capabilities first, and then register it, otherwise various handlers already present in the kernel will not be able to connect to the device. Reported-by: Lauri Kasanen <cand@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()Grygorii Strashko
Now serio_find_driver() will print warnings in case device_attach() returns -EPROBE_DEFER. Those warnings are obsolete, in genral, because: - DD core can report the same if required - since commit 013c074f8642 ("PM / sleep: prohibit devices probing during suspend/hibernation") the devices probing is prohibited during System suspend and deferred device will be carefully reprobed once Resume is finished. Hence, drop warnings in case of EPROBE_DEFER from serio_find_driver(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cap11xx - add missing of_node_putAmitoj Kaur Chawla
for_each_child_of_node performs an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: sirfsoc-onkey - allow modular buildArnd Bergmann
CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: xpad - remove unused functionArnd Bergmann
There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-28Merge tag 'seccomp-4.5-rc2' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into for-linus
2016-01-28KEYS: Only apply KEY_FLAG_KEEP to a key if a parent keyring has it setDavid Howells
KEY_FLAG_KEEP should only be applied to a key if the keyring it is being linked into has KEY_FLAG_KEEP set. To this end, partially revert the following patch: commit 1d6d167c2efcfe9539d9cffb1a1be9c92e39c2c0 Author: Mimi Zohar <zohar@linux.vnet.ibm.com> Date: Thu Jan 7 07:46:36 2016 -0500 KEYS: refcount bug fix to undo the change that made it unconditional (Mimi got it right the first time). Without undoing this change, it becomes impossible to delete, revoke or invalidate keys added to keyrings through __key_instantiate_and_link() where the keyring has itself been linked to. To test this, run the following command sequence: keyctl newring foo @s keyctl add user a a %:foo keyctl unlink %user:a %:foo keyctl clear %:foo With the commit mentioned above the third and fourth commands fail with EPERM when they should succeed. Reported-by: Stephen Gallager <sgallagh@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> cc: Mimi Zohar <zohar@linux.vnet.ibm.com> cc: keyrings@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-01-27PCI: iproc: Allow multiple devices except on PAXCRay Jui
Commit 943ebae781f5 ("PCI: iproc: Add PAXC interface support") only allowed device 0, which is a regression on BCMA-based platforms. All systems support only one device, a Root Port at 00:00.0, on the root bus. PAXC-based systems support only the Root Port (00:00.0) and a single device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc. Non-PAXC systems support arbitrary devices below the Root Port. [bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check] Fixes: 943ebae781f5 ("PCI: iproc: Add PAXC interface support") Reported-by: Rafal Milecki <zajec5@gmail.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-01-27cpufreq: cpufreq-dt: avoid uninitialized variable warnings:Arnd Bergmann
gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c: cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls. This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototypeArnd Bergmann
There are two definitions of pxa_cpufreq_change_voltage, with slightly different prototypes after one of them had its argument marked 'const'. Now the other one (for !CONFIG_REGULATOR) produces a harmless warning: drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target': drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); ^ drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *' static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) ^ This changes the prototype in the same way as the other, which avoids the warning. Fixes: 03c229906311 (cpufreq: pxa: make pxa_freqs arrays const) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM: APM_EMULATION does not depend on PMArnd Bergmann
The APM emulation code does multiple things, and some of them depend on PM_SLEEP, while the battery management does not. However, selecting the symbol like SHARPSL_PM does causes a Kconfig warning: warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION) From all I can tell, this is completely harmless, and we can simply allow APM_EMULATION to be enabled here, even if PM is not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Use list_is_last() to check last entry of the policy listGautham R Shenoy
Currently next_policy() explicitly checks if a policy is the last policy in the cpufreq_policy_list. Use the standard list_is_last primitive instead. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Fix NULL reference crash while accessing policy->governor_dataViresh Kumar
There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [<c058f1bc>] lr : [<c058ae88>] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60) [<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc) [<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38) [<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4) [<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0) [<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0) [<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104) [<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90) [<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Reported-and-tested-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-10-01 09:13:56 +0000