| Age | Commit message (Collapse) | Author |
|---|
|
MCC fills duration limit of a role according to NoA description.
If P2P PS changes during MCC, we don't process P2P PS via normal
flow. Instead, we re-fill duration limit of the role for new NoA
description, and then we do MCC update.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-7-pkshih@realtek.com
|
|
In MCC STA+GC mode, the offset between TBTTs of remote AP and remote GO
might change. If the change is larger than tolerance, we should update
MCC after re-calculating parameters for new things. So, we track that in
rtw89_track_work() now. And, we add MCC update flow to tell FW either to
change durations of roles or to replace entire pattern according to how
MCC plans BT slot.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-6-pkshih@realtek.com
|
|
Each MCC (multi-channel concurrency) role maintains a bitmap of mac IDs.
The bitmap is supposed to contain the two points below.
* mac ID of itself
* mac ID(s) of STA(s) connecting to it
Under STA+GC mode, the bitmaps of both roles should not change. However,
under STA+GO mode, the bitmap of GO may change due to P2P clients which
connect/disconnect to/from it.
FW controls (TDMA-based) MCC things via mac IDs in bitmap of each role.
For example, mac IDs are required by FW when it wants to pause role1's
TX in role0 slot.
So, to sync between driver and FW, we update the new mac ID bitmap of GO
to FW once it's changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-5-pkshih@realtek.com
|
|
DPK is one kind of RF calibration. When MCC (multi-channel concurrency)
start/stop, DPK needs to do extra things to be off/on. We add a chanctx
callback type, RTW89_CHANCTX_CALLBACK_RFK, and register it for RTL8852C
to deal with DPK according to MCC states.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-4-pkshih@realtek.com
|
|
After MCC (multi-channel concurrency) is started, FW will control channel
changes and use the corresponding backup of RF calibration result. And,
driver RF calibration (RF-K) won't be able to keep up with the speed at
which the channels are changing. So, even if we keep tracking it in driver,
the RF-K result might not be good either. To save these unnecessary things,
we disable driver RF-K tracking during MCC.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-3-pkshih@realtek.com
|
|
RF calibration will notify FW to backup the calibration result after it
is done on a channel. For MCC (multi-channel concurrency) flow, when we
at RTW89_ENTITY_MODE_MCC_PREPARE mode, RF calibration should execute on
second channel of MCC, i.e. RTW89_SUB_ENTITY_1, and then, notify FW to
backup the result for the second one.
Originally, the RF calibration flow only fit single channel case. We are
planning to support MCC on RTL8852C, so we refine its RF calibration flow
to fit MCC case.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908031145.20931-2-pkshih@realtek.com
|
|
While converting struct ieee80211_tim_ie::virtual_map to be a flexible
array it was observed that the TIM IE processing in cw1200_rx_cb()
could potentially process a malformed IE in a manner that could result
in a buffer over-read. Add logic to verify that the TIM IE length is
large enough to hold a valid TIM payload before processing it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831-ieee80211_tim_ie-v3-1-e10ff584ab5d@quicinc.com
|
|
Patch eef46ab713f7 introduced a new gfs2 quota=quiet mount option.
Checks for the new option were added to quota.c, but a check in
gfs2_quota_lock_check() was overlooked. This patch adds the missing
check.
Fixes: eef46ab713f7 ("gfs2: Introduce new quota=quiet mount option")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, function gfs2_scan_glock_lru would only try to free
glocks that had a reference count of 0. But if the reference count ever
got to 0, the glock should have already been freed.
Shrinker function gfs2_dispose_glock_lru checks whether glocks on the
LRU are demote_ok, and if so, tries to demote them. But that's only
possible if the reference count is at least 1.
This patch changes gfs2_scan_glock_lru so it will try to demote and/or
dispose of glocks that have a reference count of 1 and which are either
demotable, or are already unlocked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
On a thawed filesystem, the freeze glock is held in shared mode. In
order to initiate a cluster-wide freeze, the node initiating the freeze
drops the freeze glock and grabs it in exclusive mode. The other nodes
recognize this as contention on the freeze glock; function
freeze_go_callback is invoked. This indicates to them that they must
freeze the filesystem locally, drop the freeze glock, and then
re-acquire it in shared mode before being able to unfreeze the
filesystem locally.
While a node is trying to re-acquire the freeze glock in shared mode,
additional contention can occur. In that case, the node must behave in
the same way as above.
Unfortunately, freeze_go_callback() contains a check that causes it to
bail out when the freeze glock isn't held in shared mode. Fix that to
allow the glock to be unlocked or held in shared mode.
In addition, update a reference to trylock_super() which has been
renamed to super_trylock_shared() in the meantime.
Fixes: b77b4a4815a9 ("gfs2: Rework freeze / thaw logic")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Hans has been asking for another person to help as the maintainer of
the x86 platform driver because Mark has not been able to find time to
do that. I got asked for the task and have been reviewing the relevant
patches for a while now but lets make it more official by adding the
MAINTAINERS entries.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230918102901.17669-2-ilpo.jarvinen@linux.intel.com
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC"),
UBSAN_BOUNDS no longer pretends 1-element arrays are unbounded. Walking
'element' and 'channel_list' will trigger warnings, so make them proper
flexible arrays.
False positive warnings were:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:6984:20
index 1 is out of range for type '__le32 [1]'
UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1126:27
index 1 is out of range for type '__le16 [1]'
for these lines of code:
6884 ch.chspec = (u16)le32_to_cpu(list->element[i]);
1126 params_le->channel_list[i] = cpu_to_le16(chanspec);
Cc: stable@vger.kernel.org # 6.5+
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230914070227.12028-1-juerg.haefliger@canonical.com
|
|
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org
|
|
The MAC address is stored at offset 0x107 in the EEPROM, like correctly
stated in the comment. Add a two bytes reserved field right before the
MAC address to shift it from offset 0x105 to 0x107.
With this the MAC address returned from my RTL8723du wifi stick can be
correctly decoded as "Shenzhen Four Seas Global Link Network Technology
Co., Ltd."
Fixes: 87caeef032fc ("wifi: rtw88: Add rtw8723du chipset support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Yanik Fuchs <Yanik.fuchs@mbv.ch>
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230907071614.2032404-1-s.hauer@pengutronix.de
|
|
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
intel_scu_ipc_dev_simple_command()
Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ipc_wait_for_interrupt()
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847c9 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The IMX spi driver has a hardcoded 8, breaking the driver for word
lengths other than 8.
Signed-off-by: Stefan Moring <stefanmoring@gmail.com>
Reported-by: Sebastian Reichel <sre@kernel.org>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Tested-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230917164037.29284-1-stefanmoring@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Peter Lafreniere says:
====================
ax25: Update link for linux-ax25.org
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update all references to the dead link to its replacement.
As the three touched files are in different areas of the tree, this is
being sent with one patch per file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Change all references to
the old site in the ax25 Kconfig to its replacement.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Update all links to the
new URL.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update the documentation to point there instead. And acknowledge that
while the linux-hams list isn't entirely dead, it isn't what most would
call 'active'. Remove that word.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matthieu Baerts says:
====================
mptcp: fix stalled connections
Daire reported a few issues with MPTCP where some connections were
stalled in different states. Paolo did a great job fixing them.
Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due
to a race condition and unlucky circumstances, that may lead to
TCP-level window shrinkage, and the connection being stalled on the
sender end.
Patch 2 is a preparation for patch 3 which processes pending subflow
errors on close. Without that and under specific circumstances, the
MPTCP-level socket might not switch to the CLOSE state and stall.
Patch 4 is also a preparation patch for the next one. Patch 5 fixes
MPTCP connections not switching to the CLOSE state when all subflows
have been closed but no DATA_FIN have been exchanged to explicitly close
the MPTCP connection. Now connections in such state will switch to the
CLOSE state after a timeout, still allowing the "make-after-break"
feature but making sure connections don't stall forever. It will be
possible to modify this timeout -- currently matching TCP TIMEWAIT value
(60 seconds) -- in a future version.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
|
|
According to RFC 8684 section 3.3:
A connection is not closed unless [...] or an implementation-specific
connection-level send timeout.
Currently the MPTCP protocol does not implement such timeout, and
connection timing-out at the TCP-level never move to close state.
Introduces a catch-up condition at subflow close time to move the
MPTCP socket to close, too.
That additionally allows removing similar existing inside the worker.
Finally, allow some additional timeout for plain ESTABLISHED mptcp
sockets, as the protocol allows creating new subflows even at that
point and making the connection functional again.
This issue is actually present since the beginning, but it is basically
impossible to solve without a long chain of functional pre-requisites
topped by commit bbd49d114d57 ("mptcp: consolidate transition to
TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current
patch, please also backport this other commit as well.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msk socket uses to different timeout to track close related
events and retransmissions. The existing helpers do not indicate
clearly which timer they actually touch, making the related code
quite confusing.
Change the existing helpers name to avoid such confusion. No
functional change intended.
This patch is linked to the next one ("mptcp: fix dangling connection
hang-up"). The two patches are supposed to be backported together.
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On incoming TCP reset, subflow closing could happen before error
propagation. That in turn could cause the socket error being ignored,
and a missing socket state transition, as reported by Daire-Byrne.
Address the issues explicitly checking for subflow socket error at
close time. To avoid code duplication, factor-out of __mptcp_error_report()
a new helper implementing the relevant bits.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will simplify the next patch ("mptcp: process pending subflow error
on close").
No functional change intended.
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.
To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.
Address the issue feeding to the rcv wnd update the correct value.
Fixes: f3589be0c420 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jisheng Zhang says:
====================
stmmac: convert to devm_stmmac_probe_config_dt
Russell pointed out there's a new devm_stmmac_probe_config_dt()
helper now when reviewing my starfive gmac error handling patch[1].
After greping the code, this nice helper was introduced by Bartosz in
[2], I think it's time to convert all dwmac users to this helper and
finally complete the TODO in [2] "but once all users of the old
stmmac_pltfr_remove() are converted to the devres helper, it will be
renamed back to stmmac_pltfr_remove() and the no_dt function removed."
Link: https://lore.kernel.org/netdev/ZOtWmedBsa6wQQ6+@shell.armlinux.org.uk/ [1]
Link: https://lore.kernel.org/all/20230623100417.93592-1-brgl@bgdev.pl/ [2]
Since v1:
- rebase on new net-next
- add make stmmac_{probe|remove}_config_dt static as suggested by Russell.
====================
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now there's no external users of these two functions, make them static
so that there aren't any new usages of stmmac_probe_config_dt().
To avoid forward declaration, move stmmac_remove_config_dt() location.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now, all users of the old stmmac_pltfr_remove() are converted to the
devres helper, it's time to rename stmmac_pltfr_remove_no_dt() back to
stmmac_pltfr_remove() and remove the old stmmac_pltfr_remove().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The calling of stmmac_pltfr_remove() now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
