summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-24igb: display a warning message when SmartSpeed worksKoki Sanagi
Current igb driver doesn't tell nothing when Link Speed is downgraded due to SmartSpeed. As a result, users suspect that there is something wrong with NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This patch make igb notify users that SmartSpeed worked. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24igb: Use pci_vfs_assigned instead of igb_vfs_are_assignedAlexander Duyck
This change makes it so that the igb driver uses the generic helper pci_vfs_assigned instead of the igb specific function igb_vfs_are_assigned. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24pci: Add SRIOV helper function to determine if VFs are assigned to guestAlexander Duyck
This function is meant to add a helper function that will determine if a PF has any VFs that are currently assigned to a guest. We currently have been implementing this function per driver, and going forward I would like to avoid that by making this function generic and using this helper. v2: Removed extern from declaration of pci_vfs_assigned in pci.h and return 0 if SR-IOV is disabled with is inline with other PCI SRIOV functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24igb: Add SMBI semaphore to I210/I211Matthew Vick
It was previously thought that, since I210/I211 are single port devices, they did not need the SMBI semaphore. This is not the case. Add support for the SMBI semaphore. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24igb: SERDES loopback sigdetect bit on i210 devicesAkeem G. Abodunrin
This patch implements SERDES loopback configuration for i210 devices by unsetting sigdetect bit, so as to fix Ethtool loopback test failure. Old sigdetect code is also simplified to take care of all devices newer than 82580 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: add WOL support for new subdevice IDEmil Tantilov
This patch adds a define and WOL support for a new subdevice ID. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: add SFP+ LX module supportDon Skidmore
This patch adds LX support to 82599 devices. This is an alternate patch to the one suggested by Stefan Behte <s.behte@babiel.com> In addition this patch includes some cleanups such as: - removed parenthesis around "x == y ||" lines inside an if statement for consistency. - grouped the sx/lx sfp types along with srlr in ixgbe_get_settings() since they all have the same supported, advertised and port values. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Stefan Behte <s.behte@babiel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: rename wol_supported to more fitting wol_enabledJacob Keller
The variable wol_supported really is just checking whether it is enabled, rather than whether it is supported. If it is enabled it will be supported, but this does not necessarily hold true the other way around. This patch renames the variable to avoid confusion. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: add driver support for x520 OCP adapter.Don Skidmore
This patch adds support for the new OCP x520 adapter. This support includes WoL. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24ixgbe: fix possible divide by zero in ixgbe_update_itrDon Skidmore
Protect the code by bailing out of ixgbe_update_itr() when this occurs. The next call to ixgbe_update_itr will continue to dynamically update ITR. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fix from David Miller: "Brown paper bag fix for sparc64" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
2013-04-24Merge tag 'gpio-v3.9-lastminute' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpi fix from Linus Walleij: "This is a last minute revert for the GPIO tree, as Mike Dunn noticed breakage on some older PXA machines due to moving PXA GPIO initcalls to the module_init initlevel" * tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: pxa: set initcall level to module init"
2013-04-25netfilter: nf_nat: missing condition in nf_xfrm_me_harder()Dan Carpenter
This if statement was accidentally dropped in (aaa795a netfilter: nat: propagate errors from xfrm_me_harder()) so now it returns unconditionally. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-24sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.David S. Miller
Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24be2net: Fix PVID tag offload for packets with inline VLAN tag.Ajit Khaparde
BE3 HW in UMC mode could wrongly double tag a packet with PVID when the packet already has a inlined VLAN tag. In UMC mode, When HW finds that a packet is already VLAN tagged PVID should not be inserted into the packet. To fix this use the FW hack to instruct the HW to skip PVID tagging. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24be2net: fix a Tx stall bug caused by a specific ipv6 packetAjit Khaparde
The ASIC could lockup in the transmit path when it tries to insert VLAN in a specific ipv6 packet. 1) Identify the packet which can cause this. 2) Check if the firmware provides a workaround to prevent this. 3) If workaround is not present, drop the packet. 4) If the firmware provides a workaround, insert the VLAN tag in the packet and inform the firmware to skip further VLAN insertions. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24be2net: Remove an incorrect pvid check in TxAjit Khaparde
To work-around a HW bug that corrupts certain packets while inserting a pvid, the driver needs to invoke a special hack in firmware to avoid the VLAN tagging in the HW. Since this logic is missing from the driver, removing the check for pvid. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'qlcnic'David S. Miller
Jitendra Kalsaria says: ==================== This set of patches has following updates: * Enhanced channel configuration logs by adding logs for various cases. * Take EPORT out of reset before disabling pause frame generation in the adapter. * Add eSwitch statistics support in ethtool stats. * Enable interrupt coalescing for 83xx adapter. * Rename IRQ description. * Added PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_834X and PCI_DEVICE_ID_QLOGIC_824X for the patch "qlcnic: Add identifying string for 83xx adapter" as per Francois comment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Update version to 5.2.42Shahed Shaikh
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Add identifying string for 83xx adapterHimanshu Madhani
o Added identifying strings for 8300 Series of adapters. o updated PCI_VENDOR_ID_QLOGIC and PCI_DEVICE_ID_824X for 8200 Series adapter. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Rename the IRQ description.Himanshu Madhani
Here's what modified vectors will look like in the /proc/interrupts MSIx INTx ----------------------------------------- 83xx qlcnic[MB] qlcnic-ethX[Rx0] qlcnic-ethX[Rx1] .. qlcnic-ethX[RxN] qlcnic-ethx[Tx0] qlcnic[MB+Tx0+Rx0] 82xx qlcnic-ethX[Rx0] qlcnic-ethX[Rx1] .. qlcnic-ethX[Tx0+RxN] qlcnic-ethX[Tx0+Rx0] Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Enable Interrupt Coalescing for 83xx adapterHimanshu Madhani
Enable Interrupt coalescing through ethtool on 83xx adapter. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Add eSwitch statistics supportShahed Shaikh
o Read eSwitch statistics from adapter and display them as part of ethtool statistics. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Take EPORT out of reset sequence before disabling PAUSEManish Chopra
o Disabling PAUSE requires access to EPORT registers, which may cause a wedge, if EPORT is in reset. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Enhance channel configuration logsManish Chopra
o Add logs for various failure conditions during channel configuration. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24arch/tile: Fix syscall return value passed to tracepointSimon Marchi
Currently the syscall number is passed, but it should be the return value, which is kept in r0. Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [using a raw 0 value]
2013-04-24Merge branch 'bnx2x'David S. Miller
Yuval Mintz says: ==================== This patch series contains several enhancements, as well as small fixes: - Patch [1/5] - Prevent a theoretical problem in our GRO implementation. - Patch [2/5] - Support Rx/Tx pause control configuration in autoneg. - Patch [3/5] - Enhance support for VF's MAC setting and removal. - Patch [4/5] - Fix a small memory leak between bnx2x and cnic. - Patch [5/5] - Allow bnx2x to recover after a second slot reset. Please consider applying these patches to `net-next'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24bnx2x: Allow recovery from second slot resetYuval Mintz
As part of PCIe Advanced Error Reporting flow, if a fatal PCI error occurs, the AER driver will cause bnx2x's PCI-core to reset. The driver's PCI error handlers will in turn restore the PCI configuration space values by calling `pci_restore_state'. However, as bnx2x does not save the PCI configuration after restoration, An additional fatal PCI error will leave the function in an unstable state until reboot, as the registers in the PCI configuration space will contain reset values. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24bnx2x: Fix memory leakYuval Mintz
There exists an `allocation race' between the CNIC and bnx2x drivers, in which both drivers allocate the same t2 memory while disregarding a possible previous allocation. Additionally, due to the current order of memory releases, some of the ILT memory in the driver is not released correctly when unloading the driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24bnx2x: Enhance MAC configuration for VFsDmitry Kravkov
Improved support for adding/removing vf mac addresses. This includes the case where HyperVisor forced the address (sampled from bulletin board), and the case where it did not in which the VF can configure its own mac address. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24bnx2x: Allow RX/TX pause control in autonegYaniv Rosner
Currently, when link is configured to auto-negotiate the flow control, disabling RX/TX pause via ethtool doesn't work. This fixes the behaviour, advertising asymmetric pause in case either one is exclusively enabled. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24bnx2x: prevent GRO false checksum claimsYuval Mintz
This patch introduces a more robust error handling flow in case of incorrect behaviour by the FW when passing on GRO aggregations. Although this should never happen (i.e., this is merely a theoretical fix), if the bnx2x driver was to receive a GRO from FW with protocol other than IPv4/IPv6, the driver would falsely claim to have performed partial checksum and set various incorrect fields in the skb header. Current behaviour of the bnx2x driver (i.e., print an error) is insufficient. This patch remedies this by simply preventing the false claims. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'mlx4'David S. Miller
Or Gerlitz says: ==================== This series adds support for the SRIOV ndo_set_vf callbacks to the mlx4 driver. Series done against the net-next tree as of commit 0c501345c "batman-adv: fix global protection fault during soft_iface destruction". We have successfully tested the series on net-next, except for getting the VF link info issue I have reported earlier today on netdev, we see the problem for both ixgbe and mlx4 VFs. Just to make sure get VF config is working OK with patch #6 - we have run it over 3.8.8 too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_en: Add a service taskAmir Vadai
Add a service task to run tasks that needed to be executed periodically. Currently the only task is a watchdog to catch NIC clock overflow, to make timestamping accurate. Will move the statistics task into this framework in a later patch. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_en: Support software timestampingAmir Vadai
Kernel software timestamping requires that the driver calls skb_tx_timestamp just before passing the skb to the HW MAC layer. This patch adds this call. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_en: Add HW timestamping (TS) supportAmir Vadai
The patch allows to enable/disable HW timestamping for incoming and/or outgoing packets. It adds and initializes all structs and callbacks needed by kernel TS API. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. When enabling TS on receive flow - VLAN stripping will be disabled. Also were made all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Read HCA frequency and map internal clockEugenia Emantayev
Read HCA frequency, read PCI clock bar and offset, map internal clock to PCI bar. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Add timestamping device capabilityEugenia Emantayev
Add new device capability for timestamping support and query FW to retrieve it. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is one last(?) big wireless bits pull request before the merge window... Regarding the mac80211 bits, Johannes says: "Here's another big pull request for the -next stream. This one has a ton of driver updates, which hopefully addresses all drivers, but maybe you have more new drivers than I have in my tree? Not entirely sure, let me know if this is the case and then I can merge wireless-next. I'm including a large number of small changes, see the shortlog. The two bigger things are making VHT compatible with not using channel contexts (from Karl) and the stop-while-suspended fixes I developed together with Stanislaw." ...and... "This time I have a relatively large number of fixes and small improvements, the most important one being Bob's RCU fix. The two big things are Felix's work on rate scaling tables (with a big thanks to Karl too) and my own work on CSA handling to finally properly handle HT (and some VHT.)" As for the iwlwifi bits, Johannes says: "The biggest work here is Bluetooth coexistence and power saving. Other than that, I have a few small fixes that weren't really needed for 3.9 and a new PCI ID." About the NFC bits, Samuel says: "With this one we have: - A major pn533 update. The pn533 framing support has been changed in order to easily support all pn533 derivatives. For example we now support the ACR122 USB dongle. - An NFC MEI physical layer code factorization through the mei_phy NFC API. Both the microread and the pn544 drivers now use it. - LLCP aggregation support. This allows NFC p2p devices to send aggregated frames containing all sort of LLCP frames except SYMM and aggregation frames. - More LLCP socket options for getting the remote device link parameters. - Fixes for the LLCP socket option code added with the first pull request for 3.10. - Some support for LLCP corner cases like 0 length SDUs and general DISC (tagged with a 0,0 dsap ssap couple) handling. - RFKILL support for NFC." For the b43 bits, Rafał says: "Let me remind the changes for b43: > Changes include: > 1) Minor improvements for HT-PHY code (BCM4331) > 2) Code cleaning for HT-PHY and N-PHY" Concerning the bluetooth bits, Gustavo says: "A set of changes intended for 3.10. The biggest changes here are from David Herrmann, he rewrote most of the HIDP layer making it more reliable. Marcel added a driver setup stage for device that need special handling on their early initialization. Other than that we have the usual clean ups, bugfixes and small improvements." Along with all that, there is the usual collection of random/various updates to ath9k, mwifiex, brcmfmac, brcmsmac, rt2x00, and wil6210. I also included a pull of the wireless tree to resolve a merge conflict. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24ktest: Reset grub menu cache with different machinesSteven Rostedt (Red Hat)
Different tests may use a different machine. In such cases, we need to try to get the current grub menu index. If the same grub menu is used for two different machines, it may not be at the same index on the second machine. A search for the index must be performed again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-24Revert "gpio: pxa: set initcall level to module init"Linus Walleij
This reverts commit 6c7e660a27da7494c670bfba21cfeba30457656c. The commit causes breakage on several older PXA machines. Reported-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-24Merge branch 'linus' into timers/coreThomas Gleixner
Reason: Get upstream fixes before adding conflicting code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-24netlink: fix compilation after memory mapped patchesNicolas Dichtel
Depending of the kernel configuration (CONFIG_UIDGID_STRICT_TYPE_CHECKS), we can get the following errors: net/netlink/af_netlink.c: In function ‘netlink_queue_mmaped_skb’: net/netlink/af_netlink.c:663:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’ net/netlink/af_netlink.c:664:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’ net/netlink/af_netlink.c: In function ‘netlink_ring_set_copied’: net/netlink/af_netlink.c:693:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’ net/netlink/af_netlink.c:694:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’ We must use the helpers to get the uid and gid, and also take care of user_ns. Fix suggested by Eric W. Biederman <ebiederm@xmission.com>. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'pci/gavin-msi-cleanup' into nextBjorn Helgaas
* pci/gavin-msi-cleanup: vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability
2013-04-24vfio-pci: Use cached MSI/MSI-X capabilitiesBjorn Helgaas
We now cache the MSI/MSI-X capability offsets in the struct pci_dev, so no need to find the capabilities again. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASKBjorn Helgaas
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the Table Offset register, not the flags ("Message Control" per spec) register. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24USB: ftdi_sio: enable two UART ports on ST Microconnect LiteAdrian Thomasset
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24Tools: hv: Fix a checkpatch warningK. Y. Srinivasan
Fix a checkpatch warning. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24tools: hv: skip iso9660 mounts in hv_vss_daemonOlaf Hering
fsreeze does not work for iso9660 filesystems. A ENOSUPP may be caught in the freeze case, but the subsequent thaw call would fail and leads to a false error. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24tools: hv: use FIFREEZE/FITHAW in hv_vss_daemonOlaf Hering
As suggested by Paolo Bonzini, use ioctl instead of calling fsfreeze. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 03:27:12 +0000