summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-24tools: hv: use getmntent in hv_vss_daemonOlaf Hering
As suggested by Paolo Bonzini, use getmntent instead of parsing output of mount(1). Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24Tools: hv: Fix a checkpatch warningK. Y. Srinivasan
Fix a checkpatch warning. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24tools: hv: fix checks for origin of netlink message in hv_vss_daemonOlaf Hering
Similar to what commit 95a69adab9acfc3981c504737a2b6578e4d846ef ("tools: hv: Netlink source address validation allows DoS") does in hv_kvp_daemon, improve checks for origin of netlink connector message. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24Tools: hv: fix warnings in hv_vss_daemonOlaf Hering
This change fixes a few compile errors: hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/' hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/' hv_vss_daemon.c: In function 'vss_operate': hv_vss_daemon.c:66: warning: 'return' with no value, in function returning non-void hv_vss_daemon.c: In function 'main': hv_vss_daemon.c:130: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result hv_vss_daemon.c: In function 'vss_operate': hv_vss_daemon.c:47: warning: 'fs_op' may be used uninitialized in this function Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-24efi: Check EFI revision in setup_efi_varsJosh Boyer
We need to check the runtime sys_table for the EFI version the firmware specifies instead of just checking for a NULL QueryVariableInfo. Older implementations of EFI don't have QueryVariableInfo but the runtime is a smaller structure, so the pointer to it may be pointing off into garbage. This is apparently the case with several Apple firmwares that support EFI 1.10, and the current check causes them to no longer boot. Fix based on a suggestion from Matthew Garrett. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-24treewide: Fix typo in printk and commentsMasanari Iida
Fix typo in printk and comments within various drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24ARM: mcpm: provide an interface to set the SMP ops at run timeNicolas Pitre
This is cleaner than exporting the mcpm_smp_ops structure. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jon Medhurst <tixy@linaro.org>
2013-04-24ARM: mcpm: generic SMP secondary bringup and hotplug supportNicolas Pitre
Now that the cluster power API is in place, we can use it for SMP secondary bringup and CPU hotplug in a generic fashion. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: mcpm_head.S: vlock-based first man electionDave Martin
Instead of requiring the first man to be elected in advance (which can be suboptimal in some situations), this patch uses a per- cluster mutex to co-ordinate selection of the first man. This should also make it more feasible to reuse this code path for asynchronous cluster resume (as in CPUidle scenarios). We must ensure that the vlock data doesn't share a cacheline with anything else, or dirty cache eviction could corrupt it. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: mcpm: Add baremetal voting mutexesDave Martin
This patch adds a simple low-level voting mutex implementation to be used to arbitrate during first man selection when no load/store exclusive instructions are usable. For want of a better name, these are called "vlocks". (I was tempted to call them ballot locks, but "block" is way too confusing an abbreviation...) There is no function to wait for the lock to be released, and no vlock_lock() function since we don't need these at the moment. These could straightforwardly be added if vlocks get used for other purposes. For architectural correctness even Strongly-Ordered memory accesses require barriers in order to guarantee that multiple CPUs have a coherent view of the ordering of memory accesses. Whether or not this matters depends on hardware implementation details of the memory system. Since the purpose of this code is to provide a clean, generic locking mechanism with no platform-specific dependencies the barriers should be present to avoid unpleasant surprises on future platforms. Note: * When taking the lock, we don't care about implicit background memory operations and other signalling which may be pending, because those are not part of the critical section anyway. A DMB is sufficient to ensure correctly observed ordering if the explicit memory accesses in vlock_trylock. * No barrier is required after checking the election result, because the result is determined by the store to VLOCK_OWNER_OFFSET and is already globally observed due to the barriers in voting_end. This means that global agreement on the winner is guaranteed, even before the winner is known locally. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: mcpm: introduce helpers for platform coherency exit/setupDave Martin
This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: mcpm: introduce the CPU/cluster power APINicolas Pitre
This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24ARM: multi-cluster PM: secondary kernel entry codeNicolas Pitre
CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24doc: devicetree: Fix various typosMasanari Iida
Fix spelling typos in Documentation/devicetree/bindings. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24ARM: cacheflush: add synchronization helpers for mixed cache state accessesNicolas Pitre
Algorithms used by the MCPM layer rely on state variables which are accessed while the cache is either active or inactive, depending on the code path and the active state. This patch introduces generic cache maintenance helpers to provide the necessary cache synchronization for such state variables to always hit main memory in an ordered way. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Dave Martin <dave.martin@linaro.org>
2013-04-24docbook: fix 8250 naming in device-driversVincent Stehlé
8250 driver has been (re)renamed to 8250_core.c by commit 9196d8acd7f91758872108958dfded7684628444. Follow that change to fix the following error when building htmldocs: docproc: /work/cross/linux//drivers/tty/serial/8250/8250.c: No such file or directory Acked-by: Rob landley <rob@landley.net> Signed-off-by: Vincent Stehlé <v-stehle@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24HID: icade: u16 which never < 0Chen Gang
from is u16 which never < 0. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-24ALSA: sound kconfig typoPavel Machek
Fix english in sound/drivers/Kconfig. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-24SH: cpuidle: use init/exit common routineDaniel Lezcano
Remove the duplicated code and use the cpuidle common code for initialization. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-24ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=yChen Gang
For arm S5pv210 with allmodconfig, ARM_S5PV210_CPUFREQ need CONFIG_CPU_FREQ_TABLE=y, or will cause compiling issue. The related operation: + arm-linux-gnu-ld -EL -p --no-undefined -X --build-id -X -o .tmp_vmlinux1 -T /root/linux-next/arch/arm/kernel/vmlinux.lds arch/arm/kernel/head.o init/built-in.o --start-group usr/built-in.o arch/arm/nwfpe/built-in.o arch/arm/vfp/built-in.o arch/arm/kernel/built-in.o arch/arm/mm/built-in.o arch/arm/common/built-in.o arch/arm/net/built-in.o arch/arm/crypto/built-in.o arch/arm/mach-s5pv210/built-in.o arch/arm/plat-samsung/built-in.o kernel/built-in.o mm/built-in.o fs/built-in.o ipc/built-in.o security/built-in.o crypto/built-in.o block/built-in.o arch/arm/lib/lib.a lib/lib.a arch/arm/lib/built-in.o lib/built-in.o drivers/built-in.o sound/built-in.o firmware/built-in.o net/built-in.o --end-group The related errors: drivers/built-in.o: In function `s5pv210_target': drivers/cpufreq/s5pv210-cpufreq.c:225: undefined reference to `cpufreq_frequency_table_target' drivers/cpufreq/s5pv210-cpufreq.c:237: undefined reference to `cpufreq_frequency_table_target' drivers/built-in.o: In function `s5pv210_verify_speed': drivers/cpufreq/s5pv210-cpufreq.c:182: undefined reference to `cpufreq_frequency_table_verify' drivers/built-in.o: In function `s5pv210_cpu_init': drivers/cpufreq/s5pv210-cpufreq.c:556: undefined reference to `cpufreq_frequency_table_get_attr' drivers/cpufreq/s5pv210-cpufreq.c:560: undefined reference to `cpufreq_frequency_table_cpuinfo' make: *** [vmlinux] Error 1 Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-24ACPI: Fix wrong parameter passed to memblock_reserveWang YanQing
Commit 53aac44 (ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas) introduced acpi_initrd_override() that passes a wrong value as the second argument to memblock_reserve(). Namely, the second argument of memblock_reserve() is the size of the region, not the address of the top of it, so make acpi_initrd_override() pass the size in there as appropriate. [rjw: Changelog] Signed-off-by: Wang YanQing <udknight@gmail.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: 3.8+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-24x86, efi: Fix a build warningBorislav Petkov
Fix this: arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’: arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default] In file included from arch/x86/boot/compressed/eboot.c:12:0: /w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’ after cc5a080c5d40 ("efi: Pass boot services variable info to runtime code"). Reported-by: Paul Bolle <pebolle@tiscali.nl> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-24ARM: dts: add pinctrl property for spi node for atmel SoCWenyou Yang
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24ARM: dts: add spi nodes for the atmel boardsRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: added spi nodes for the sam9263ek, sam9g20ek, sam9m10g45ek and sam9n12ek boards] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24ARM: dts: add spi nodes for atmel SoCRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: add spi nodes for sam9260, sam9263, sam9g45 and sam9n12] [wenyou.yang@atmel.com: remove spi property "cs-gpios" to the board dts files] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24ARM: at91: add clocks for spi dt entriesRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [<wenyou.yang@atmel.com: declare the spi clocks for sam9260, at91sam9g45, and at91sam9n12] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24spi/spi-atmel: add dmaengine supportNicolas Ferre
Add dmaengine support. Using "has_dma_support" member of struct is used to select the transfer mode: dmaengine or pdc. For the dmaengine transfer mode, it supports both 8 bits and 16 bits transfer. For the dmaengine transfer mode, if it fails to config dmaengine, or if the message length is less than 16 bytes, it will use the PIO transfer mode. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: using "has_dma_support" to select dmaengine as the spi xfer mode] [wenyou.yang@atmel.com: fix DMA: OOPS if buffer > 4096 bytes] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [richard.genoud@gmail.com: update with dmaengine interface] [richard.genoud@gmail.com: fix __init/__devinit sections mismatch] [richard.genoud@gmail.com: adapt to slave_config changes] [richard.genoud@gmail.com: add support t0 16 bits transfer] Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24regulator: ab3100: device tree supportLinus Walleij
This implements device tree support for the AB3100 regulators driver. The initial settings are moved out of platform data and into the driver for the device tree case, as it appears that there is no way to supply this as AUXDATA for an I2C device. The style and bindings are heavily inspired by Lee Jones' style for AB8500. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24regulator: ab3100: refactor probe to use IDsLinus Walleij
This refactors the AB3100 regulator probe to use regulator IDs and pass this to a separate registration function. This works much smoother when migrating to device tree, as we can use a match table with this regulator ID encoded in the .driver_data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24regulator: max8973: Don't override control1 variable when set ramp delay bitsAxel Lin
Current code overrides control1 variable when setting ramp delay bits. Fix it by just setting ramp_delay bits. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24Revert "drm/i915: Don't overclock on Haswell"Ben Widawsky
This reverts commit fec46b5eff854df5647a9f4724e45dd33933855a. The latest version of our PM programming doc (which is WAY better than previous versions, and thanks for that) says something along the lines of, "On Haswell overclocking is no long achieved via mailbox registers." Which I misinterpreted as, the driver must done something different than it did on IVB, and SNB. It appears I jumped the gun, and that's all false. We've gotten some clarification, and it appears at least *reading* the overclocking information works in exactly the same manner. Cc: kim.l.saw-chu@intel.com Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-24sched: Prevent to re-select dst-cpu in load_balance()Joonsoo Kim
Commit 88b8dac0 makes load_balance() consider other cpus in its group. But, in that, there is no code for preventing to re-select dst-cpu. So, same dst-cpu can be selected over and over. This patch add functionality to load_balance() in order to exclude cpu which is selected once. We prevent to re-select dst_cpu via env's cpus, so now, env's cpus is a candidate not only for src_cpus, but also dst_cpus. With this patch, we can remove lb_iterations and max_lb_iterations, because we decide whether we can go ahead or not via env's cpus. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-7-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Rename load_balance_tmpmask to load_balance_maskJoonsoo Kim
This name doesn't represent specific meaning. So rename it to imply it's purpose. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-6-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Move up affinity check to mitigate useless redoing overheadJoonsoo Kim
Currently, LBF_ALL_PINNED is cleared after affinity check is passed. So, if task migration is skipped by small load value or small imbalance value in move_tasks(), we don't clear LBF_ALL_PINNED. At last, we trigger 'redo' in load_balance(). Imbalance value is often so small that any tasks cannot be moved to other cpus and, of course, this situation may be continued after we change the target cpu. So this patch move up affinity check code and clear LBF_ALL_PINNED before evaluating load value in order to mitigate useless redoing overhead. In addition, re-order some comments correctly. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Jason Low <jason.low2@hp.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-5-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Don't consider other cpus in our group in case of NEWLY_IDLEJoonsoo Kim
Commit 88b8dac0 makes load_balance() consider other cpus in its group, regardless of idle type. When we do NEWLY_IDLE balancing, we should not consider it, because a motivation of NEWLY_IDLE balancing is to turn this cpu to non idle state if needed. This is not the case of other cpus. So, change code not to consider other cpus for NEWLY_IDLE balancing. With this patch, assign 'if (pulled_task) this_rq->idle_stamp = 0' in idle_balance() is corrected, because NEWLY_IDLE balancing doesn't consider other cpus. Assigning to 'this_rq->idle_stamp' is now valid. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-4-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Explicitly cpu_idle_type checking in rebalance_domains()Joonsoo Kim
After commit 88b8dac0, dst-cpu can be changed in load_balance(), then we can't know cpu_idle_type of dst-cpu when load_balance() return positive. So, add explicit cpu_idle_type checking. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24sched: Change position of resched_cpu() in load_balance()Joonsoo Kim
cur_ld_moved is reset if env.flags hit LBF_NEED_BREAK. So, there is possibility that we miss doing resched_cpu(). Correct it as changing position of resched_cpu() before checking LBF_NEED_BREAK. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Tested-by: Jason Low <jason.low2@hp.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366705662-3587-2-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24x86/iommu/dmar: Remove warning for HPET scope typeLinn Crosetto
ACPI_DMAR_SCOPE_TYPE_HPET is parsed by ir_parse_ioapic_hpet_scope() and should not be flagged as an unsupported type. Signed-off-by: Linn Crosetto <linn@hp.com> Cc: joro@8bytes.org Cc: ddutile@redhat.com Cc: suresh.b.siddha@intel.com Link: http://lkml.kernel.org/r/1366741605-71293-1-git-send-email-linn@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24x86/olpc/xo1/sci: Don't call input_free_device() after input_unregister_device()Wei Yongjun
input_free_device() should only be used if input_register_device() was not called yet or if it failed. Once device was unregistered use input_unregister_device() and memory will be freed once last reference to the device is dropped. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: dsd@laptop.org Cc: pgf@laptop.org Cc: gregkh@linuxfoundation.org Link: http://lkml.kernel.org/r/CAPgLHd84cboeucog%2BYNdHvGqTfTROujDKZgSkh3o0B-Q93ee2A@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-24ALSA: emu10k1: Fix dock firmware loadingTakashi Iwai
The commit [b209c4df: ALSA: emu10k1: cache emu1010 firmware] broke the firmware loading of the dock, just (mistakenly) ignoring a different firmware for docks on some models. This patch revives them again. Bugzilla: https://bugs.archlinux.org/task/34865 Reported-and-tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com> Cc: <stable@vger.kernel.org> [v3.8+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-24fbdev/sgivwfb: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-24fbdev/vermillion: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alan Hourihane <alanh@fairlite.demon.co.uk>
2013-04-24fbdev/sa1100fb: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-24fbdev/fb-puv3: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
2013-04-24fbdev/controlfb: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-24fbdev/omapfb: use vm_iomap_memory()Tomi Valkeinen
Use vm_iomap_memory() instead of [io_]remap_pfn_range(). vm_iomap_memory() gives us much simpler API to map memory to userspace, and reduces possibilities for bugs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-24powerpc/powernv: Fix missing Kconfig dependency for MSIsBenjamin Herrenschmidt
We need PPC_MSI_BITMAP support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-24Merge remote-tracking branch 'origin/master' into nextBenjamin Herrenschmidt
Merge upstream to get the audit fixes
2013-04-24drm/tilcdc: Fix checkpatch error in tilcdc_panel.cSachin Kamat
Fixes the following checkpatch error: ERROR: "foo * bar" should be "foo *bar" Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-22 09:46:14 +0000