summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-18f2fs: support FIEMAP_FLAG_XATTRChao Yu
This patch enables ->fiemap to handle FIEMAP_FLAG_XATTR flag for xattr mapping info lookup purpose. It makes f2fs passing generic/425 test in fstest. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-18f2fs: fix to cover f2fs_inline_data_fiemap with inode_lockChao Yu
This patch fix to cover f2fs_inline_data_fiemap with inode_lock in order to make that interface avoiding race with mapping change. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-18f2fs: check node page again in write end ioYunlei He
Check node page again in write end io in case of data corruption during inflght IO. Signed-off-by: Yunlei He <heyunlei@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-18f2fs: fix to caclulate required free section correctlyChao Yu
When calculating required free section during file defragmenting, we should skip holes in file, otherwise we will probably fail to defrag sparse file with large size. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-18f2fs: handle newly created page when revoking inmem pagesDaeho Jeong
When committing inmem pages is successful, we revoke already committed blocks in __revoke_inmem_pages() and finally replace the committed ones with the old blocks using f2fs_replace_block(). However, if the committed block was newly created one, the address of the old block is NEW_ADDR and __f2fs_replace_block() cannot handle NEW_ADDR as new_blkaddr properly and a kernel panic occurrs. Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Tested-by: Shu Tan <shu.tan@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-19xfrm: fix error flow in case of add state failsAviad Yehezkel
If add state fails in case of device offload, netdev refcount will be negative since gc task is attempting to dev_free this state. This is fixed by putting NULL in state dev field. Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Boris Pismeny <borisp@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-19dmaengine: stm32-dmamux: Remove unnecessary platform_get_resource() error checkWei Yongjun
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-01-19KVM: PPC: Book3S: Provide information about hardware/firmware CVE workaroundsPaul Mackerras
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace information about the underlying machine's level of vulnerability to the recently announced vulnerabilities CVE-2017-5715, CVE-2017-5753 and CVE-2017-5754, and whether the machine provides instructions to assist software to work around the vulnerabilities. The ioctl returns two u64 words describing characteristics of the CPU and required software behaviour respectively, plus two mask words which indicate which bits have been filled in by the kernel, for extensibility. The bit definitions are the same as for the new H_GET_CPU_CHARACTERISTICS hypercall. There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which indicates whether the new ioctl is available. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-18blk-throttle: track read and write request individuallyJoseph Qi
In mixed read/write workload on SSD, write latency is much lower than read. But now we only track and record read latency and then use it as threshold base for both read and write io latency accounting. As a result, write io latency will always be considered as good and bad_bio_cnt is much smaller than 20% of bio_cnt. That is to mean, the tg to be checked will be treated as idle most of the time and still let others dispatch more ios, even it is truly running under low limit and wants its low limit to be guaranteed, which is not we expected in fact. So track read and write request individually, which can bring more precise latency control for low limit idle detection. Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com> Reviewed-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-19Merge tag 'drm-intel-fixes-2018-01-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Display corruption regression bugfix with both a prep patch and a follow-up fix * tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix deadlock in i830_disable_pipe() drm/i915: Redo plane sanitation during readout drm/i915: Add .get_hw_state() method for planes
2018-01-18ibmvnic: Fix IPv6 packet descriptorsThomas Falcon
Packet descriptor generation for IPv6 is broken. Properly set L3 and L4 protocol flags for IPv6 descriptors. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18ibmvnic: Fix IP offload control bufferThomas Falcon
Set some missing fields in the IP control offload buffer. This buffer is used to enable checksum and TCP segmentation offload in the VNIC server. The buffer length field and the checksum offloading bits were not set properly, so fix that here. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18Merge tag 'linux-can-fixes-for-4.15-20180118' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-01-18 ==================== this is a pull reqeust of two patches for net/master: The syzkaller project triggered two WARN_ONCE() in the af_can code from userspace and we decided to replace it by a pr_warn_once(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18ipv6: don't let tb6_root node share routes with other nodeWei Wang
After commit 4512c43eac7e, if we add a route to the subtree of tb6_root which does not have any route attached to it yet, the current code will let tb6_root and the node in the subtree share the same route. This could cause problem cause tb6_root has RTN_INFO flag marked and the tree repair and clean up code will not work properly. This commit makes sure tb6_root->leaf points back to null_entry instead of sharing route with other node. It fixes the following syzkaller reported issue: BUG: KASAN: use-after-free in ipv6_prefix_equal include/net/ipv6.h:540 [inline] BUG: KASAN: use-after-free in fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618 Read of size 8 at addr ffff8801bc043498 by task syz-executor5/19819 CPU: 1 PID: 19819 Comm: syz-executor5 Not tainted 4.15.0-rc7+ #186 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 ipv6_prefix_equal include/net/ipv6.h:540 [inline] fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618 fib6_add+0x5fa/0x1540 net/ipv6/ip6_fib.c:1214 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1003 ip6_route_add+0x141/0x190 net/ipv6/route.c:2790 ipv6_route_ioctl+0x4db/0x6b0 net/ipv6/route.c:3299 inet6_ioctl+0xef/0x1e0 net/ipv6/af_inet6.c:520 sock_do_ioctl+0x65/0xb0 net/socket.c:958 sock_ioctl+0x2c2/0x440 net/socket.c:1055 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686 SYSC_ioctl fs/ioctl.c:701 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692 entry_SYSCALL_64_fastpath+0x23/0x9a RIP: 0033:0x452ac9 RSP: 002b:00007fd42b321c58 EFLAGS: 00000212 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000000071bea0 RCX: 0000000000452ac9 RDX: 0000000020fd7000 RSI: 000000000000890b RDI: 0000000000000013 RBP: 000000000000049e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006f4f70 R13: 00000000ffffffff R14: 00007fd42b3226d4 R15: 0000000000000000 Fixes: 4512c43eac7e ("ipv6: remove null_entry before adding default route") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Thought I'd try my luck getting one more in: - Two fixes for Tegra (one is to common code, but our userspace doesn't hit it). - One for NV5x-class MCPs * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling drm/nouveau/bar/gk20a: Avoid bar teardown during init drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
2018-01-18net/sched/sch_prio.c: work around gcc-4.4.4 union initializer issuesAndrew Morton
gcc-4.4.4 has problems witn anon union initializers. Work around this. net/sched/sch_prio.c: In function 'prio_dump_offload': net/sched/sch_prio.c:260: error: unknown field 'stats' specified in initializer net/sched/sch_prio.c:260: warning: initialization makes integer from pointer without a cast net/sched/sch_prio.c:261: error: unknown field 'stats' specified in initializer net/sched/sch_prio.c:261: warning: initialization makes integer from pointer without a cast Fixes: 7fdb61b44c0c95 ("net: sch: prio: Add offload ability to PRIO qdisc") Cc: Nogah Frankel <nogahf@mellanox.com> Cc: Yuval Mintz <yuvalm@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18ip6_gre: init dev->mtu and dev->hard_header_len correctlyAlexey Kodanev
Commit b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") moved dev->mtu initialization from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a result, the previously set values, before ndo_init(), are reset in the following cases: * rtnl_create_link() can update dev->mtu from IFLA_MTU parameter. * ip6gre_tnl_link_config() is invoked before ndo_init() in netlink and ioctl setup, so ndo_init() can reset MTU adjustments with the lower device MTU as well, dev->mtu and dev->hard_header_len. Not applicable for ip6gretap because it has one more call to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init(). Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]' parameter if a user sets it manually on a device creation, and fix the second one by moving ip6gre_tnl_link_config() call after register_netdevice(). Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Fixes: db2ec95d1ba4 ("ip6_gre: Fix MTU setting") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-18mlxsw: spectrum_router: Free LPM tree upon failureIdo Schimmel
When a new LPM tree is created, we try to replace the trees in the existing virtual routers with it. If we fail, the tree needs to be freed. Currently, this does not happen in the unlikely case where we fail to bind the tree to the first virtual router, since its reference count never transitions from 1 to 0. Fix that by taking a reference before binding the tree. Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19drm/nouveau/mmu/mcp77: fix regressions in stolen memory handlingBen Skeggs
- Fixes addition of stolen memory base address to PTEs. - Removes support for compression. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Pierre Moreau <pierre.morrow@free.fr>
2018-01-19drm/nouveau/bar/gk20a: Avoid bar teardown during initJon Hunter
Commit bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown") introduced add a teardown helper function for BAR1. During initialisation of the Nouveau, initially all the teardown helpers are called once, before calling their init counterparts. For gk20a, after the BAR1 teardown function is called, the device is hanging during the initialisation of the FB sub-device. At this point it is unclear why this is happening and this is still under investigation. However, this change is preventing Tegra124 devices from booting when Nouveau is enabled. To allow Tegra124 to boot, remove the teardown helper for gk20a. This is based upon a previous patch by Guillaume Tucker but limits the workaround to only gk20a GPUs. Fixes: bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown") Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-01-19drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()Thierry Reding
This is obviously wrong in the current code. Make sure to record the correct size of the arguments and pass the actual arguments to the nvif_object_map_handle() function. Suggested-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-01-19KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless cededBenjamin Herrenschmidt
This works on top of the single escalation support. When in single escalation, with this change, we will keep the escalation interrupt disabled unless the VCPU is in H_CEDE (idle). In any other case, we know the VCPU will be rescheduled and thus there is no need to take escalation interrupts in the host whenever a guest interrupt fires. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19KVM: PPC: Book3S HV: Make xive_pushed a byte, not a wordBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19KVM: PPC: Book3S HV: Check DR not IR to chose real vs virt mode MMIOsBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19KVM: PPC: Book3S HV: Don't use existing "prodded" flag for XIVE escalationsBenjamin Herrenschmidt
The prodded flag is only cleared at the beginning of H_CEDE, so every time we have an escalation, we will cause the *next* H_CEDE to return immediately. Instead use a dedicated "irq_pending" flag to indicate that a guest interrupt is pending for the VCPU. We don't reuse the existing exception bitmap so as to avoid expensive atomic ops. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19KVM: PPC: Book3S HV: Enable use of the new XIVE "single escalation" featureBenjamin Herrenschmidt
That feature, provided by Power9 DD2.0 and later, when supported by newer OPAL versions, allows us to sacrifice a queue (priority 7) in favor of merging all the escalation interrupts of the queues of a single VP into a single interrupt. This reduces the number of host interrupts used up by KVM guests especially when those guests use multiple priorities. It will also enable a future change to control the masking of the escalation interrupts more precisely to avoid spurious ones. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19KVM: PPC: Book3S HV: Add more info about XIVE queues in debugfsBenjamin Herrenschmidt
Add details about enabled queues and escalation interrupts. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-19Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-nextPaul Mackerras
This merges in the ppc-kvm topic branch of the powerpc tree to get two patches which are prerequisites for the following patch series, plus another patch which touches both powerpc and KVM code. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-01-18MIPS: Use proper kernel-doc Return keywordMathieu Malaterre
For reference: * https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation Fix non-fatal warning: arch/mips/kernel/branch.c:418: warning: Excess function parameter 'returns' description in '__compute_return_epc_for_insn' Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Maciej W. Rozycki <macro@mips.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18031/ [jhogan@kernel.org: Expand subject slightly] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Loongson64: Drop 32-bit support for Loongson 2E/2F devicesJiaxun Yang
The 32-bit support was broken at runtime, it doesn't boot anymore, witch is hard to debug because even early printk isn't working, also there are some build warnings. Some newer bootloader may not support 32-bit ELF. So we decide to drop 32-bit support. Make loongson64 a pure 64-bit arch. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18174/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial GCW Zero supportPaul Cercueil
The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused handheld game console, successfully kickstarted in ~2012, running Linux. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Mathieu Malaterre <malat@debian.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18490/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18devicetree/bindings: Add GCW vendor prefixPaul Cercueil
Game Consoles Worldwide, mostly known under the acronym GCW, is the creator of the GCW Zero open-source video game system. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18489/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: JZ4770: Work around config2 misreporting associativityMaarten ter Huurne
According to config2, the associativity would be 5-ways, but the documentation states 4-ways, which also matches the documented L2 cache size of 256 kB. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18488/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial JZ4770 supportPaul Cercueil
Provide just enough bits (clocks, clocksource, uart) to allow a kernel to boot on the JZ4770 SoC to a initramfs userspace. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18487/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Detect machtype from SoC compatible stringPaul Cercueil
Previously, the mips_machtype variable was always initialized to MACH_INGENIC_JZ4740 even if running on different SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18486/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: platform: add machtype IDs for more Ingenic SoCsPaul Cercueil
Add a machtype ID for the JZ4780 SoC, which was missing, and one for the newly supported JZ4770 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18485/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Use common cmdline handling codePaul Burton
jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to arcs_cmdline, up to argc (in fw_arg0). The common code in fw_init_cmdline will do the exact same thing when run on a system where fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't use it). Remove the custom implementation & use the generic code. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18484/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Setup boot_command_line before plat_mem_setupPaul Burton
Platforms using DT will typically call __dt_setup_arch from plat_mem_setup. This in turn calls early_init_dt_scan. When CONFIG_CMDLINE is set, this leads to its value being copied into boot_command_line by early_init_dt_scan_chosen. If this happens before the code setting up boot_command_line in arch_mem_init runs, that code will go on to append CONFIG_CMDLINE (via builtin_cmdline) to boot_command_line again, duplicating it. For some command line parameters (eg. earlycon) this can be a problem. Set up boot_command_line before early_init_dt_scan_chosen gets called such that it will not write CONFIG_CMDLINE in this scenario & the arguments aren't duplicated. Signed-off-by: Paul Burton <paul.burton@mips.com> Acked-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18483/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: Add Ingenic jz4770 CGU driverPaul Cercueil
Add support for the clocks provided by the CGU in the Ingenic JZ4770 SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18482/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18dt-bindings: clock: Add jz4770-cgu.h headerPaul Cercueil
This will be used from the devicetree bindings to specify the clocks that should be obtained from the jz4770-cgu driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18481/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: ingenic: Add code to enable/disable PLLsPaul Cercueil
This commit permits the PLLs to be dynamically enabled and disabled when their children clocks are enabled and disabled. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18480/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: ingenic: support PLLs with no bypass bitPaul Cercueil
The second PLL of the JZ4770 does not have a bypass bit. This commit makes it possible to support it with the current common CGU code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18479/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: ingenic: Fix recalc_rate for clocks with fixed dividerPaul Cercueil
Previously, the clocks with a fixed divider would report their rate as being the same as the one of their parent, independently of the divider in use. This commit fixes this behaviour. This went unnoticed as neither the jz4740 nor the jz4780 CGU code have clocks with fixed dividers yet. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18477/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18clk: ingenic: Use const pointer to clk_ops in structPaul Cercueil
The CGU common code does not modify the pointed clk_ops structure, so it should be marked as const. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18476/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ftrace: Remove pointer comparison to 0 in prepare_ftrace_returnMathieu Malaterre
Replace pointer comparison to 0 with NULL in prepare_ftrace_return to improve code readability. Identified with coccinelle script 'badzero.cocci'. Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18494/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIANCorentin Labbe
MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does not exist. Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig name. Note that BMIPS_GENERIC does the same which confirms that this patch is needed. Fixes: eed0eabd12ef0 ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.9+ Patchwork: https://patchwork.linux-mips.org/patch/18495/ [jhogan@kernel.org: Clean up commit message] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18Merge branch 'bpf-array-map-offload-and-tests'Daniel Borkmann
Jakub Kicinski says: ==================== This set brings in the rest of map offload code held up by urgent fixes and improvements to the BPF arrays. The first 3 patches take care of array map offload, similarly to hash maps the attribute validation is split out to a separate map op, and used for both offloaded and non-offloaded case (allocation only happens if map is on the host). Offload support comes down to allowing this map type through the offload check in the core. NFP driver also rejects the delete operation in case of array maps. Subsequent patches add reporting of target device in a very similar way target device of programs is reported (ifindex+netns dev/ino). Netdevsim is extended with a trivial map implementation allowing us to test the offload in test_offload.py. Last patch adds a small busy wait to NFP map IO, this improves the response times which is especially useful for map dumps. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-18nfp: bpf: add short busy wait for FW repliesJakub Kicinski
Scheduling out and in for every FW message can slow us down unnecessarily. Our experiments show that even under heavy load the FW responds to 99.9% messages within 200 us. Add a short busy wait before entering the wait queue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-18selftest/bpf: extend the offload test with map checksJakub Kicinski
Check map device information is reported correctly, and perform basic map operations. Check device destruction gets rid of the maps and map allocation failure path by telling netdevsim to reject map offload via DebugFS. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-18netdevsim: bpf: support fake map offloadJakub Kicinski
Add to netdevsim ability to pretend it's offloading BPF maps. We only allow allocation of tiny 2 entry maps, to keep things simple. Mutex lock may seem heavy for the operations we perform, but we want to make sure callbacks can sleep. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-10-01 13:01:52 +0000