summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-20serial: imx: restore handshaking irq for imx1Uwe Kleine-König
Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20powerpc/pkeys: Fix reading of ibm, processor-storage-keys propertyThiago Jung Bauermann
scan_pkey_feature() uses of_property_read_u32_array() to read the ibm,processor-storage-keys property and calls be32_to_cpu() on the value it gets. The problem is that of_property_read_u32_array() already returns the value converted to the CPU byte order. The value of pkeys_total ends up more or less sane because there's a min() call in pkey_initialize() which reduces pkeys_total to 32. So in practice the kernel ignores the fact that the hypervisor reserved one key for itself (the device tree advertises 31 keys in my test VM). This is wrong, but the effect in practice is that when a process tries to allocate the 32nd key, it gets an -EINVAL error instead of -ENOSPC which would indicate that there aren't any keys available Fixes: cf43d3b26452 ("powerpc: Enable pkey subsystem") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-20b43: fix DMA error related regression with proprietary firmwareLarry Finger
In commit 66cffd6daab7 ("b43: fix transmit failure when VT is switched"), a condition is noted where the network controller needs to be reset. Note that this situation happens when running the open-source firmware (http://netweb.ing.unibs.it/~openfwwf/), plus a number of other special conditions. for a different card model, it is reported that this change breaks operation running the proprietary firmware (https://marc.info/?l=linux-wireless&m=153504546924558&w=2). Rather than reverting the previous patch, the code is tweaked to avoid the reset unless the open-source firmware is being used. Fixes: 66cffd6daab7 ("b43: fix transmit failure when VT is switched") Cc: Stable <stable@vger.kernel.org> # 4.18+ Cc: Taketo Kabe <kabe@sra-tohoku.co.jp> Reported-and-tested-by: D. Prabhu <d.praabhu@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-20usb: typec: mux: Take care of driver module reference countingHeikki Krogerus
Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: core: safely deal with the dynamic quirk listsHarry Pan
Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <harry.pan@intel.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: roles: Take care of driver module reference countingHeikki Krogerus
This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: <stable@vger.kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20powerpc: fix csum_ipv6_magic() on little endian platformsChristophe Leroy
On little endian platforms, csum_ipv6_magic() keeps len and proto in CPU byte order. This generates a bad results leading to ICMPv6 packets from other hosts being dropped by powerpc64le platforms. In order to fix this, len and proto should be converted to network byte order ie bigendian byte order. However checksumming 0x12345678 and 0x56341278 provide the exact same result so it is enough to rotate the sum of len and proto by 1 byte. PPC32 only support bigendian so the fix is needed for PPC64 only Fixes: e9c4943a107b ("powerpc: Implement csum_ipv6_magic in assembly") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Xin Long <lucien.xin@gmail.com> Cc: <stable@vger.kernel.org> # 4.18+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-20USB: handle NULL config in usb_find_alt_setting()Alan Stern
usb_find_alt_setting() takes a pointer to a struct usb_host_config as an argument; it searches for an interface with specified interface and alternate setting numbers in that config. However, it crashes if the usb_host_config pointer argument is NULL. Since this is a general-purpose routine, available for use in many places, we want to to be more robust. This patch makes it return NULL whenever the config argument is NULL. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+19c3aaef85a89d451eac@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: fix error handling in usb_driver_claim_interface()Alan Stern
The syzbot fuzzing project found a use-after-free bug in the USB core. The bug was caused by usbfs not unbinding from an interface when the USB device file was closed, which led another process to attempt the unbind later on, after the private data structure had been deallocated. The reason usbfs did not unbind the interface at the appropriate time was because it thought the interface had never been claimed in the first place. This was caused by the fact that usb_driver_claim_interface() does not clean up properly when device_bind_driver() returns an error. Although the error code gets passed back to the caller, the iface->dev.driver pointer remains set and iface->condition remains equal to USB_INTERFACE_BOUND. This patch adds proper error handling to usb_driver_claim_interface(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+f84aa7209ccec829536f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: remove LPM management from usb_driver_claim_interface()Alan Stern
usb_driver_claim_interface() disables and re-enables Link Power Management, but it shouldn't do either one, for the reasons listed below. This patch removes the two LPM-related function calls from the routine. The reason for disabling LPM in the analogous function usb_probe_interface() is so that drivers won't have to deal with unwanted LPM transitions in their probe routine. But usb_driver_claim_interface() doesn't call the driver's probe routine (or any other callbacks), so that reason doesn't apply here. Furthermore, no driver other than usbfs will ever call usb_driver_claim_interface() unless it is already bound to another interface in the same device, which means disabling LPM here would be redundant. usbfs doesn't interact with LPM at all. Lastly, the error return from usb_unlocked_disable_lpm() isn't handled properly; the code doesn't clean up its earlier actions before returning. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: restore warning for nonsensical flagsOliver Neukum
If we filter flags before they reach the core we need to generate our own warnings. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: sanitize flags moreOliver Neukum
Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Sebastian Andrzej Siewior
service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: musb: dsps: do not disable CPPI41 irq in driver teardownBin Liu
TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts in both musb controllers. So disabling the CPPI irq in one musb driver breaks the other musb module. Since musb is already disabled before tearing down dma controller in musb_remove(), it is safe to not disable CPPI irq in musb_dma_controller_destroy(). Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Merge tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtdGreg Kroah-Hartman
Boris writes: "- Fixes a bug in the ->read/write_reg() implementation of the m25p80 driver - Make sure of_node_get/put() calls are balanced in the partition parsing code - Fix a race in the denali NAND controller driver - Fix false positive WARN_ON() in the marvell NAND controller driver" * tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd: mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able mtd: partitions: fix unbalanced of_node_get/put() mtd: rawnand: denali: fix a race condition when DMA is kicked mtd: rawnand: marvell: prevent harmless warnings
2018-09-20Merge tag 'sound-4.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Takashi writes: "sound fixes for 4.19-rc5 here comes a collection of various fixes, mostly for stable-tree or regression fixes. Two relatively high LOCs are about the (rather simple) conversion of uapi integer types in topology API, and a regression fix about HDMI hotplug notification on AMD HD-audio. The rest are all small individual fixes like ASoC Intel Skylake race condition, minor uninitialized page leak in emu10k1 ioctl, Firewire audio error paths, and so on." * tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: fireworks: fix memory leak of response buffer at error path ALSA: oxfw: fix memory leak of discovered stream formats at error path ALSA: oxfw: fix memory leak for model-dependent data at error path ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path ALSA: hda - Enable runtime PM only for discrete GPU ALSA: oxfw: fix memory leak of private data ALSA: firewire-tascam: fix memory leak of private data ALSA: firewire-digi00x: fix memory leak of private data sound: don't call skl_init_chip() to reset intel skl soc sound: enable interrupt after dma buffer initialization Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO ASoC: cs4265: fix MMTLR Data switch control ASoC: AMD: Ensure reset bit is cleared before configuring ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER ASoC: rsnd: adg: care clock-frequency size ASoC: uniphier: change status to orphan ASoC: rsnd: fixup not to call clk_get/set under non-atomic ...
2018-09-20xfrm: validate template modeSean Tranchetti
XFRM mode parameters passed as part of the user templates in the IP_XFRM_POLICY are never properly validated. Passing values other than valid XFRM modes can cause stack-out-of-bounds reads to occur later in the XFRM processing: [ 140.535608] ================================================================ [ 140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4 [ 140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148 [ 140.557369] [ 140.558927] Call trace: [ 140.558936] dump_backtrace+0x0/0x388 [ 140.558940] show_stack+0x24/0x30 [ 140.558946] __dump_stack+0x24/0x2c [ 140.558949] dump_stack+0x8c/0xd0 [ 140.558956] print_address_description+0x74/0x234 [ 140.558960] kasan_report+0x240/0x264 [ 140.558963] __asan_report_load4_noabort+0x2c/0x38 [ 140.558967] xfrm_state_find+0x17e4/0x1cc4 [ 140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8 [ 140.558975] xfrm_lookup+0x238/0x1444 [ 140.558977] xfrm_lookup_route+0x48/0x11c [ 140.558984] ip_route_output_flow+0x88/0xc4 [ 140.558991] raw_sendmsg+0xa74/0x266c [ 140.558996] inet_sendmsg+0x258/0x3b0 [ 140.559002] sock_sendmsg+0xbc/0xec [ 140.559005] SyS_sendto+0x3a8/0x5a8 [ 140.559008] el0_svc_naked+0x34/0x38 [ 140.559009] [ 140.592245] page dumped because: kasan: bad access detected [ 140.597981] page_owner info is not active (free page?) [ 140.603267] [ 140.653503] ================================================================ Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-19Merge branch 'qed-fixes'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed: Fix series for multi-function mode implementation. The patch series addresses few issues in the switch dependent multi-function modes. Please consider applying it to 'net' tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Add missing device config for RoCE EDPM in UFP mode.Sudarsana Reddy Kalluru
This patch adds support to configure the DORQ to use vlan-id/priority for roce EDPM. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Do not add VLAN 0 tag to untagged frames in multi-function mode.Sudarsana Reddy Kalluru
In certain multi-function switch dependent modes, firmware adds vlan tag 0 to the untagged frames. This leads to double tagging for the traffic if the dcbx is enabled, which is not the desired behavior. To avoid this, driver needs to set "dcb_dont_add_vlan0" flag. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19qed: Fix populating the invalid stag value in multi function mode.Sudarsana Reddy Kalluru
In multi-function mode, driver receives the stag value (outer vlan) for a PF from management FW (MFW). If the stag value is negotiated prior to the driver load, then the stag is not notified to the driver and hence driver will have the invalid stag value. The fix is to request the MFW for STAG value during the driver load time. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20drm/vmwgfx: Fix buffer object evictionThomas Hellstrom
Commit 19be55701071 ("drm/ttm: add operation ctx to ttm_bo_validate v2") introduced a regression where the vmwgfx driver refused to evict a buffer that was still busy instead of waiting for it to become idle. Fix this. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2018-09-20drm/vmwgfx: Don't impose STDU limits on framebuffer sizeDeepak Rawat
If framebuffers are larger, we create bounce surfaces that are within STDU limits. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: limit mode size for all display unit to texture_maxDeepak Rawat
For all display units, limit mode size exposed to texture_max_width/ height as this is the maximum framebuffer size that virtual device can create. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: limit screen size to stdu_max during check_modesetDeepak Rawat
For STDU individual screen target size is limited by SVGA_REG_SCREENTARGET_MAX_WIDTH/HEIGHT registers so add that limit during atomic check_modeset. An additional limit is placed in the update_layout ioctl to avoid requesting layouts that current user-space typically can't support. Also modified the comments to reflect current limitation on topology. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20drm/vmwgfx: don't check for old_crtc_state enable statusDeepak Rawat
During atomic check to prepare the new topology no need to check if old_crtc_state was enabled or not. This will cause atomic_check to fail because due to connector routing a crtc can be in atomic_state even if there was no change to enable status. Detected this issue with igt run. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-09-20powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again)Alexey Kardashevskiy
mpe: This was fixed originally in commit d3d4ffaae439 ("powerpc/powernv/ioda2: Reduce upper limit for DMA window size"), but contrary to what the merge commit says was inadvertently lost by me in commit ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next") which brought in changes that moved the code to a new file. So reapply it to the new file. Original commit message follows: We use PHB in mode1 which uses bit 59 to select a correct DMA window. However there is mode2 which uses bits 59:55 and allows up to 32 DMA windows per a PE. Even though documentation does not clearly specify that, it seems that the actual hardware does not support bits 59:55 even in mode1, in other words we can create a window as big as 1<<58 but DMA simply won't work. This reduces the upper limit from 59 to 55 bits to let the userspace know about the hardware limits. Fixes: ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-19net: mvneta: fix the Rx desc buffer DMA unmappingAntoine Tenart
With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19ip6_tunnel: be careful when accessing the inner headerPaolo Abeni
the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DTIcenowy Zheng
The R40 HDMI PHY seems to be different to the A64 one, the A64 one has no input mux, but the R40 one has. Drop the A64 fallback compatible from the HDMI PHY node in R40 DT. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [wens@csie.org: Fix subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-19drm/amdgpu: add new polaris pci idAlex Deucher
Add new pci id. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-09-19Merge tag 'batadv-net-for-davem-20180919' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== pull request for net: batman-adv 2018-09-19 here are some bugfixes which we would like to see integrated into net. We forgot to bump the version number in the last round for net-next, so the belated patch to do that is included - we hope you can adopt it. This will most likely create a merge conflict later when merging into net-next with this rounds net-next patchset, but net-next should keep the 2018.4 version[1]. [1] resolution: --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -25,11 +25,7 @@ #define BATADV_DRIVER_DEVICE "batman-adv" #ifndef BATADV_SOURCE_VERSION -<<<<<<< -#define BATADV_SOURCE_VERSION "2018.3" -======= #define BATADV_SOURCE_VERSION "2018.4" ->>>>>>> #endif /* B.A.T.M.A.N. parameters */ Please pull or let me know of any problem! Here are some batman-adv bugfixes: - Avoid ELP information leak, by Sven Eckelmann - Fix sysfs segfault issues, by Sven Eckelmann (2 patches) - Fix locking when adding entries in various lists, by Sven Eckelmann (5 patches) - Fix refcount if queue_work() fails, by Marek Lindner (2 patches) - Fixup forgotten version bump, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20Merge tag 'drm-intel-fixes-2018-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only fixes coming from gvt containing "Two more BXT fixes from Colin, one srcu locking fix and one fix for GGTT clear when destroy vGPU." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919151915.GA6309@intel.com
2018-09-20Merge tag 'drm-misc-fixes-2018-09-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v4.19-rc5: - Fix crash in vgem in drm_drv_uses_atomic_modeset. - Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries. - Fix compiler warning for unused connector_funcs. - Fix null pointer deref on UDL unplug. - Disable DRM support for sun4i's R40 for now. (Not all patches went in for v4.19, so it has to wait a cycle.) - NULL-terminate the of_device_id table in pl111. - Make sure vc4 NV12 planar format works when displaying an unscaled fb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dda393bb-f13f-8d36-711b-cacfc578e5a3@linux.intel.com
2018-09-20kvm: selftests: Add platform_info_testDrew Schmitt
Test guest access to MSR_PLATFORM_INFO when the capability is enabled or disabled. Signed-off-by: Drew Schmitt <dasch@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: x86: Control guest reads of MSR_PLATFORM_INFODrew Schmitt
Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access to reads of MSR_PLATFORM_INFO. Disabling access to reads of this MSR gives userspace the control to "expose" this platform-dependent information to guests in a clear way. As it exists today, guests that read this MSR would get unpopulated information if userspace hadn't already set it (and prior to this patch series, only the CPUID faulting information could have been populated). This existing interface could be confusing if guests don't handle the potential for incorrect/incomplete information gracefully (e.g. zero reported for base frequency). Signed-off-by: Drew Schmitt <dasch@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: x86: Turbo bits in MSR_PLATFORM_INFODrew Schmitt
Allow userspace to set turbo bits in MSR_PLATFORM_INFO. Previously, only the CPUID faulting bit was settable. But now any bit in MSR_PLATFORM_INFO would be settable. This can be used, for example, to convey frequency information about the platform on which the guest is running. Signed-off-by: Drew Schmitt <dasch@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20nVMX x86: Check VPID value on vmentry of L2 guestsKrish Sadhukhan
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check needs to be enforced on vmentry of L2 guests: If the 'enable VPID' VM-execution control is 1, the value of the of the VPID VM-execution control field must not be 0000H. Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2Krish Sadhukhan
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check needs to be enforced on vmentry of L2 guests: - Bits 5:0 of the posted-interrupt descriptor address are all 0. - The posted-interrupt descriptor address does not set any bits beyond the processor's physical-address width. Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICvLiran Alon
In case L1 do not intercept L2 HLT or enter L2 in HLT activity-state, it is possible for a vCPU to be blocked while it is in guest-mode. According to Intel SDM 26.6.5 Interrupt-Window Exiting and Virtual-Interrupt Delivery: "These events wake the logical processor if it just entered the HLT state because of a VM entry". Therefore, if L1 enters L2 in HLT activity-state and L2 has a pending deliverable interrupt in vmcs12->guest_intr_status.RVI, then the vCPU should be waken from the HLT state and injected with the interrupt. In addition, if while the vCPU is blocked (while it is in guest-mode), it receives a nested posted-interrupt, then the vCPU should also be waken and injected with the posted interrupt. To handle these cases, this patch enhances kvm_vcpu_has_events() to also check if there is a pending interrupt in L2 virtual APICv provided by L1. That is, it evaluates if there is a pending virtual interrupt for L2 by checking RVI[7:4] > VPPR[7:4] as specified in Intel SDM 29.2.1 Evaluation of Pending Interrupts. Note that this also handles the case of nested posted-interrupt by the fact RVI is updated in vmx_complete_nested_posted_interrupt() which is called from kvm_vcpu_check_block() -> kvm_arch_vcpu_runnable() -> kvm_vcpu_running() -> vmx_check_nested_events() -> vmx_complete_nested_posted_interrupt(). Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: VMX: check nested state and CR4.VMXE against SMMPaolo Bonzini
VMX cannot be enabled under SMM, check it when CR4 is set and when nested virtualization state is restored. This should fix some WARNs reported by syzkaller, mostly around alloc_shadow_vmcs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20kvm: x86: make kvm_{load|put}_guest_fpu() staticSebastian Andrzej Siewior
The functions kvm_load_guest_fpu() kvm_put_guest_fpu() are only used locally, make them static. This requires also that both functions are moved because they are used before their implementation. Those functions were exported (via EXPORT_SYMBOL) before commit e5bb40251a920 ("KVM: Drop kvm_{load,put}_guest_fpu() exports"). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20x86/hyper-v: rename ipi_arg_{ex,non_ex} structuresVitaly Kuznetsov
These structures are going to be used from KVM code so let's make their names reflect their Hyper-V origin. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: VMX: use preemption timer to force immediate VMExitSean Christopherson
A VMX preemption timer value of '0' is guaranteed to cause a VMExit prior to the CPU executing any instructions in the guest. Use the preemption timer (if it's supported) to trigger immediate VMExit in place of the current method of sending a self-IPI. This ensures that pending VMExit injection to L1 occurs prior to executing any instructions in the guest (regardless of nesting level). When deferring VMExit injection, KVM generates an immediate VMExit from the (possibly nested) guest by sending itself an IPI. Because hardware interrupts are blocked prior to VMEnter and are unblocked (in hardware) after VMEnter, this results in taking a VMExit(INTR) before any guest instruction is executed. But, as this approach relies on the IPI being received before VMEnter executes, it only works as intended when KVM is running as L0. Because there are no architectural guarantees regarding when IPIs are delivered, when running nested the INTR may "arrive" long after L2 is running e.g. L0 KVM doesn't force an immediate switch to L1 to deliver an INTR. For the most part, this unintended delay is not an issue since the events being injected to L1 also do not have architectural guarantees regarding their timing. The notable exception is the VMX preemption timer[1], which is architecturally guaranteed to cause a VMExit prior to executing any instructions in the guest if the timer value is '0' at VMEnter. Specifically, the delay in injecting the VMExit causes the preemption timer KVM unit test to fail when run in a nested guest. Note: this approach is viable even on CPUs with a broken preemption timer, as broken in this context only means the timer counts at the wrong rate. There are no known errata affecting timer value of '0'. [1] I/O SMIs also have guarantees on when they arrive, but I have no idea if/how those are emulated in KVM. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> [Use a hook for SVM instead of leaving the default in x86.c - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: VMX: modify preemption timer bit only when arming timerSean Christopherson
Provide a singular location where the VMX preemption timer bit is set/cleared so that future usages of the preemption timer can ensure the VMCS bit is up-to-date without having to modify unrelated code paths. For example, the preemption timer can be used to force an immediate VMExit. Cache the status of the timer to avoid redundant VMREAD and VMWRITE, e.g. if the timer stays armed across multiple VMEnters/VMExits. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: VMX: immediately mark preemption timer expired only for zero valueSean Christopherson
A VMX preemption timer value of '0' at the time of VMEnter is architecturally guaranteed to cause a VMExit prior to the CPU executing any instructions in the guest. This architectural definition is in place to ensure that a previously expired timer is correctly recognized by the CPU as it is possible for the timer to reach zero and not trigger a VMexit due to a higher priority VMExit being signalled instead, e.g. a pending #DB that morphs into a VMExit. Whether by design or coincidence, commit f4124500c2c1 ("KVM: nVMX: Fully emulate preemption timer") special cased timer values of '0' and '1' to ensure prompt delivery of the VMExit. Unlike '0', a timer value of '1' has no has no architectural guarantees regarding when it is delivered. Modify the timer emulation to trigger immediate VMExit if and only if the timer value is '0', and document precisely why '0' is special. Do this even if calibration of the virtual TSC failed, i.e. VMExit will occur immediately regardless of the frequency of the timer. Making only '0' a special case gives KVM leeway to be more aggressive in ensuring the VMExit is injected prior to executing instructions in the nested guest, and also eliminates any ambiguity as to why '1' is a special case, e.g. why wasn't the threshold for a "short timeout" set to 10, 100, 1000, etc... Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: SVM: Switch to bitmap_zalloc()Andy Shevchenko
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM/MMU: Fix comment in walk_shadow_page_lockless_end()Tianyu Lan
kvm_commit_zap_page() has been renamed to kvm_mmu_commit_zap_page() This patch is to fix the commit. Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20kvm: selftests: use -pthread instead of -lpthreadLei Yang
I run into the following error testing/selftests/kvm/dirty_log_test.c:285: undefined reference to `pthread_create' testing/selftests/kvm/dirty_log_test.c:297: undefined reference to `pthread_join' collect2: error: ld returned 1 exit status my gcc version is gcc version 4.8.4 "-pthread" would work everywhere Signed-off-by: Lei Yang <Lei.Yang@windriver.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-20KVM: x86: don't reset root in kvm_mmu_setup()Wei Yang
Here is the code path which shows kvm_mmu_setup() is invoked after kvm_mmu_create(). Since kvm_mmu_setup() is only invoked in this code path, this means the root_hpa and prev_roots are guaranteed to be invalid. And it is not necessary to reset it again. kvm_vm_ioctl_create_vcpu() kvm_arch_vcpu_create() vmx_create_vcpu() kvm_vcpu_init() kvm_arch_vcpu_init() kvm_mmu_create() kvm_arch_vcpu_setup() kvm_mmu_setup() kvm_init_mmu() This patch set reset_roots to false in kmv_mmu_setup(). Fixes: 50c28f21d045dde8c52548f8482d456b3f0956f5 Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:32:51 +0000