| Age | Commit message (Collapse) | Author |
|---|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
make C=1 reports:
warning: Function parameter or struct member 'mrtt' not described in 'ccid2_rtt_estimator'
So document the 'mrtt' parameter.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240505-ccid2_rtt_estimator-kdoc-v1-1-09231fcb9145@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, a Vec<T>'s ptr value, after calling Vec<T>::new(), is
initialized to Unique::dangling(). Hence, in VecExt<T>::reserve(), we're
passing a dangling pointer (instead of NULL) to krealloc() whenever a new
Vec<T>'s backing storage is allocated through VecExt<T> extension
functions.
This only works as long as align_of::<T>(), used by Unique::dangling() to
derive the dangling pointer, resolves to a value between 0x0 and
ZERO_SIZE_PTR (0x10) and krealloc() hence treats it the same as a NULL
pointer however.
This isn't a case we should rely on, since there may be types whose
alignment may exceed the range still covered by krealloc(), plus other
kernel allocators are not as tolerant either.
Instead, pass a real NULL pointer to krealloc_aligned() if Vec<T>'s
capacity is zero.
Fixes: 5ab560ce12ed ("rust: alloc: update `VecExt` to take allocation flags")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240501134834.22323-1-dakr@redhat.com
[ Solved `use` conflict and applied the `if`-instead-of-`match` change
discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The embedded PHYs of the 88E6250 family switches are very basic - they
do not even have an Extended Address / Page register.
This adds support for the PHYs to the driver to set up PHY interrupts
and retrieve error stats. To deal with PHYs without a page register,
"simple" variants of all stat handling functions are introduced.
The code should work with all 88E6250 family switches (6250/6220/6071/
6070/6020). The PHY ID 0x01410db0 was read from a 88E6020, under the
assumption that all switches of this family use the same ID. The spec
only lists the prefix 0x01410c00 and leaves the last 10 bits as reserved,
but that seems too unspecific to be useful, as it would cover several
existing PHY IDs already supported by the driver; therefore, the ID read
from the actual hardware is used.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/0695f699cd942e6e06da9d30daeedfd47785bc01.1714643285.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The list of stat registers is read-only, so we can declare it as const.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/24d7a2f39e0c4c94466e8ad43228fdd798053f3a.1714643285.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cupertino Miranda says:
====================
Fix number of arguments in test
Hi everyone,
This is a new version based on comments.
Regards,
Cupertino
Changes from v1:
- Comment with gcc-bpf replaced by bpf_gcc.
- Used pragma GCC optimize to disable GCC optimization in test.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
====================
Link: https://lore.kernel.org/r/20240507122220.207820-1-cupertino.miranda@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The test_xdp_noinline.c contains 2 functions that use more then 5
arguments. This patch collapses the 2 last arguments in an array.
Also in GCC and ipa_sra optimization increases the number of arguments
used in function encap_v4. This pass disables the optimization for that
particular file.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-3-cupertino.miranda@oracle.com
|
|
This patch adds support to specify CFLAGS per source file and per test
runner.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-2-cupertino.miranda@oracle.com
|
|
The vmlinux.h file generated by bpftool makes use of compiler pragmas
in order to install the CO-RE preserve_access_index in all the struct
types derived from the BTF info:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_t = record
#endif
[... type definitions generated from kernel BTF ... ]
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute pop
#endif
The `clang attribute push/pop' pragmas are specific to clang/llvm and
are not supported by GCC.
At the moment the BTF dumping services in libbpf do not support
dicriminating between types dumped because they are directly referred
and types dumped because they are dependencies. A suitable API is
being worked now. See [1] and [2].
In the interim, this patch changes the selftests/bpf Makefile so it
passes -DBPF_NO_PRESERVE_ACCESS_INDEX to GCC when it builds the
selftests. This workaround is temporary, and may have an impact on
the results of the GCC-built tests.
[1] https://lore.kernel.org/bpf/20240503111836.25275-1-jose.marchesi@oracle.com/T/#u
[2] https://lore.kernel.org/bpf/20240504205510.24785-1-jose.marchesi@oracle.com/T/#u
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507095011.15867-1-jose.marchesi@oracle.com
|
|
Jose E. Marchesi says:
====================
bpf: avoid `attribute ignored' warnings in GCC
These two patches avoid warnings (turned into errors) when building
the BPF selftests with GCC.
[Changes from V1:
- As requested by reviewer, an additional patch has been added in
order to remove __hidden from the `private' macro in
cpumask_common.h.
- Typo bening -> benign fixed in the commit message of the second
patch.]
====================
Link: https://lore.kernel.org/r/20240507074227.4523-1-jose.marchesi@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
This patch modifies selftests/bpf/Makefile to pass -Wno-attributes to
GCC. This is because of the following attributes which are ignored:
- btf_decl_tag
- btf_type_tag
There are many of these. At the moment none of these are
recognized/handled by gcc-bpf.
We are aware that btf_decl_tag is necessary for some of the
selftest harness to communicate test failure/success. Support for
it is in progress in GCC upstream:
https://gcc.gnu.org/pipermail/gcc-patches/2024-May/650482.html
However, the GCC master branch is not yet open, so the series
above (currently under review upstream) wont be able to make it
there until 14.1 gets released, probably mid next week.
As for btf_type_tag, more extensive work will be needed in GCC
upstream to support it in both BTF and DWARF. We have a WIP big
patch for that, but that is not needed to compile/build the
selftests.
- used
There are SEC macros defined in the selftests as:
#define SEC(N) __attribute__((section(N),used))
The SEC macro is used for both functions and global variables.
According to the GCC documentation `used' attribute is really only
meaningful for functions, and it warns when the attribute is used
for other global objects, like for example ctl_array in
test_xdp_noinline.c.
Ignoring this is benign.
- align_value
In progs/test_cls_redirect.c:127 there is:
typedef uint8_t *net_ptr __attribute__((align_value(8)));
GCC warns that it is ignoring this attribute, because it is not
implemented by GCC.
I think ignoring this attribute in GCC is benign, because according
to the clang documentation [1] its purpose seems to be merely
declarative and doesn't seem to translate into extra checks at
run-time, only to perhaps better optimized code ("runtime behavior
is undefined if the pointed memory object is not aligned to the
specified alignment").
[1] https://clang.llvm.org/docs/AttributeReference.html#align-value
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-3-jose.marchesi@oracle.com
|
|
An object defined as `static' defaults to hidden visibility. If
additionally the visibility(__weak__) compiler attribute is applied to
the declaration of the object, GCC warns that the attribute gets
ignored.
This patch removes the only instance of this problem among the BPF
selftests.
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-2-jose.marchesi@oracle.com
|
|
As the comment described in "struct vm_fault":
".address" : 'Faulting virtual address - masked'
".real_address" : 'Faulting virtual address - unmasked'
The link [1] said: "Whatever the routes, all architectures end up to the
invocation of handle_mm_fault() which, in turn, (likely) ends up calling
__handle_mm_fault() to carry out the actual work of allocating the page
tables."
__handle_mm_fault() does address assignment:
.address = address & PAGE_MASK,
.real_address = address,
This is debug dump by running `./test_progs -a "*arena*"`:
[ 69.767494] arena fault: vmf->address = 10000001d000, vmf->real_address = 10000001d008
[ 69.767496] arena fault: vmf->address = 10000001c000, vmf->real_address = 10000001c008
[ 69.767499] arena fault: vmf->address = 10000001b000, vmf->real_address = 10000001b008
[ 69.767501] arena fault: vmf->address = 10000001a000, vmf->real_address = 10000001a008
[ 69.767504] arena fault: vmf->address = 100000019000, vmf->real_address = 100000019008
[ 69.769388] arena fault: vmf->address = 10000001e000, vmf->real_address = 10000001e1e8
So we can use the value of 'vmf->address' to do BPF arena kernel address
space cast directly.
[1] https://docs.kernel.org/mm/page_tables.html
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Link: https://lore.kernel.org/r/20240507063358.8048-1-haiyue.wang@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "i++" was accidentally left out so it just sets qgids[0] over and
over.
This can lead to unexpected problems, as the groups[1:] would be all 0,
leading to later find_qgroup_rb() unable to find a qgroup and cause
snapshot creation failure.
Fixes: 5343cd9364ea ("btrfs: qgroup: simple quota auto hierarchy for nested subvolumes")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
error state
Currently the error status of super block write is tracked in page/folio
status bit Error. For that we need to keep the reference for the whole
duration of write and wait.
Count the number of superblock writeback errors in the btrfs_device.
That means we don't need the folio to stay around until it's waited for,
and can avoid the extra call to folio_get/put.
Also remove a mention of PageError in a comment as it's the last mention
of the page Error state.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Iterate over folios instead of bvecs. Switch the order of unlock and put
to be the usual order; we know this folio can't be put until it's been
waited for, but that's fragile. Remove the calls to ClearPageUptodate /
SetPageUptodate -- if PAGE_SIZE is larger than BTRFS_SUPER_INFO_SIZE,
we'd be marking the entire folio uptodate without having actually
initialised all the bytes in the page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a direct conversion from pages to folios, assuming single page
folio. Also removes some calls to obsolete APIs and some hidden calls to
compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is a direct conversion from pages to folios, assuming single page
folio. Also removes a few calls to compound_head() and calls to
obsolete APIs.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Several modules use __bio_add_page() today and may need to be converted
to bio_add_folio_nofail().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove duplicate included header file linux/blkdev.h .
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the lock_extent tightly coupled with
extent_clear_unlock_delalloc we can add a cached state to
extent_clear_unlock_delalloc and benefit from skipping the extra lookup
when we're doing cow.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to include the time we spend in the allocator under our
extent lock protection, move it after the allocator and make sure we
lock the extent in the error case to ensure we're not clearing these
bits without the extent lock held.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've got the extent lock pushed into cow_file_range() we can
push it further down into the allocation loop. This allows us to only
hold the extent lock during the dropping of the extent map range and
inserting the ordered extent.
This makes the error case a little trickier as we'll now have to lock
the range before clearing any of the other extent bits for the range,
but this is the error path so is less performance critical.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These checks aren't reliant on the extent lock. Move this up into
cow_file_range_inline(), and then update encoded writes to call this
check before calling __cow_file_range_inline(). This will allow us to
skip the extent lock if we're not able to inline the given extent.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've pushed the lock_extent() into cow_file_range() we can
push the extent locking into cow_file_range_inline() and move the
lock_extent in cow_file_range() to after we call
cow_file_range_inline().
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that cow_file_range is the only function that is called with the
range locked, push this call into cow_file_range so we can further
narrow the scope.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is used by zoned but also as the fallback for uncompressed extents
when we fail to compress the ranges. Push the extent lock into
run_dealloc_cow(), and adjust the compression case to take the extent
lock after calling run_delalloc_cow().
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we immediately unlock the extent range when we enter
run_delalloc_compressed() simply move the lock_extent() down to cover
cow_file_range() and then remove the unlock_extent() from
run_delalloc_compressed.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
run_delalloc_nocow is a little special because we use the file extents
to see if we can nocow a range. We don't actually need the protection
of the extent lock to look at the file extents at this point however.
We are currently holding the page lock for this range, so we are
protected from anybody who would simultaneously be modifying the file
extent items for this range.
* mmap() - we're holding the page lock.
* buffered writes - we're holding the page lock.
* direct writes - we're holding the page lock and direct IO has to flush
page cache before it's able to continue.
* fallocate() - all callers flush the range and wait on ordered extents
while holding the inode lock and the mmap lock, so we are again saved
by the page lock.
We want to use the extent lock to protect
1) The mapping tree for the given range.
2) The ordered extents for the given range.
3) The io_tree for the given range.
Push the extent lock down to cover these operations. In the
fallback_to_cow() case we simply lock before doing anything and rely on
the cow_file_range() helper to handle it's range properly.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have the following pattern
while (1) {
if (cur_offset > end)
break;
}
Which is just
while (cur_offset <= end) {
...
}
so adjust the code to be more clear.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
run_delalloc_nocow is a bit special as it walks through the file extents
for the inode and determines what it can nocow and what it can't. This
is the more complicated area for extent locking, so start with this
function.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We want to limit the scope of the extent lock to be around operations
that can change in flight. Currently we hold the extent lock through
the entire writepage operation, which isn't really necessary.
We want to protect to make sure nobody has updated DELALLOC. In
find_lock_delalloc_range we must lock the range in order to validate the
contents of our io_tree. However once we've done that we're safe to
unlock the range and continue, as we have the page lock already held for
the range.
We are protected from all operations at this point.
* mmap() - we're holding the page lock, thus are protected.
* buffered writes - again, we're protected because we take the page lock
for the first and last page in our range for buffered writes so we
won't create new delalloc ranges in this area.
* direct IO - we invalidate pagecache before attempting to write a new
area, which requires the page lock, so again are protected once we're
holding the page lock on this range.
Additionally this behavior actually already exists for compressed, we
unlock the range as soon as we start to process the async extents, and
re-lock it during compression. So this is completely safe, and makes
the locking more consistent.
Make this simple by just pushing the extent lock into
btrfs_run_delalloc_range. From there followup patches will push the
lock further down into its users.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We currently don't lock the extent when we're doing a
cow_file_range_inline() for a compressed extent. This isn't a problem
necessarily, but it's inconsistent with the rest of our usage of
cow_file_range_inline(). This also leads to some extra weird logic
around whether the extent is locked or not. Fix this to lock the extent
before calling cow_file_range_inline() in compression to make it
consistent with the rest of the inline users. In future patches this
will be pushed down into the cow_file_range_inline() helper, so we're
fine with the quick and dirty locking here. This patch exists to make
the behavior change obvious.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We duplicate the extent cleanup for cow_file_range_inline() in the cow
and compressed case. The encoded case doesn't need to do cleanup the
same way, so rename cow_file_range_inline to __cow_file_range_inline and
then make cow_file_range_inline handle the extent cleanup appropriately,
and update the callers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since 4750af3bbe5d ("btrfs: prevent extent_clear_unlock_delalloc() to
unlock page not locked by __process_pages_contig()") we have been
unlocking the locked page manually instead of via
extent_clear_unlock_delalloc() because of subpage blocksize support.
However we actually disable inline extent creation for subpage blocksize
support, so this behavior isn't necessary. Remove this code and
comment, if at some point the subpage blocksize code grows support for
inline extents this can be re-evaluated.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we have a lot of duplicated checks of
if (start == 0 && fs_info->sectorsize == PAGE_SIZE)
cow_file_range_inline();
Instead of duplicating this check everywhere, consolidate all of the
inline extent logic into a helper which documents all of the checks and
then use that helper inside of cow_file_range_inline(). With this we
can clean up all of the calls to either unconditionally call
cow_file_range_inline(), or at least reduce the checks we're doing
before we call cow_file_range_inline();
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the cow path we will clone the reloc csums for relocated data
extents, and if there's an error we already have an ordered extent and
rely on the ordered extent finishing to clean everything up.
There's a problem however, we don't mark the ordered extent with an
error, we pretend like everything was just fine. If we were at the end
of our range we won't actually bubble up this error anywhere, and we
could end up inserting an extent that doesn't have csums where it should
have them.
Fix this by adding a helper to mark the ordered extent with an error,
and then use this when we fail to lookup the csums in
btrfs_reloc_clone_csums. Use this helper in the other place where we
use the same pattern while we're here.
This will prevent us from erroneously inserting the extent that doesn't
have the required checksums.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function create_io_em() is called before we submit an IO, to update
the in-memory extent map for the involved range.
This patch changes the following aspects:
- Does not allow BTRFS_ORDERED_NOCOW type
For real NOCOW (excluding NOCOW writes into preallocated ranges)
writes, we never call create_io_em(), as we does not need to update
the extent map at all.
So remove the sanity check allowing BTRFS_ORDERED_NOCOW type.
- Add extra sanity checks
* PREALLOC
- @block_len == len
For uncompressed writes.
* REGULAR
- @block_len == @orig_block_len == @ram_bytes == @len
We're creating a new uncompressed extent, and referring all of it.
- @orig_start == @start
We haven no offset inside the extent.
* COMPRESSED
- valid @compress_type
- @len <= @ram_bytes
This is to co-operate with encoded writes, which can cause a new
file extent referring only part of a uncompressed extent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With the tree-checker ensuring all inline file extents starts at file
offset 0 and has a length no larger than sectorsize, we can simplify the
calculation to assigned those fixes values directly.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent_map structure is very critical to btrfs, as it is involved
for both read and write paths.
Unfortunately the structure is not properly explained, making it pretty
hard to understand nor to do further improvement.
This patch adds extra comments explaining the major members based on my
code reading. Hopefully we can find more members to cleanup in the
future.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
calcu_metadata_size() has a "reserve" argument, but the only caller always
set it to "1". The other usage (reserve = 0) is dropped by a commit
0647bf564f1e ("Btrfs: improve forever loop when doing balance relocation"),
which is more than 10 years ago. Drop the argument and simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's another return variable wret that is only passed to ret on
error, we can simply use ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
First, drop err instead reuse ret, choose to return the error instead of
goto fail and then return the same error. Do not initialize the ret
until where it has to be initialized. Slight logic change in handling
the btrfs_search_slot() and btrfs_next_leaf() return value.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename ret to ret2 compile and then err to ret. Also, new ret2 is found
to be localized within the 'if (trans)' statement, so move its
declaration there.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In quick_update_accounting() err is used as 2nd return value, which could
be achieved just with ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Coding style fixes the function relocate_tree_blocks(). After the fix,
ret is the return value variable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Code style fix in the function build_backref_tree(). Drop the ret
initialization 0, as we don't need it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename the function's local return variables err and werr to ret.
Also, align the variable declarations with the other declarations in
the function for better function space alignment.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Rename the function's local variable werr and err to ret.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the function btrfs_write_marked_extents() and in __btrfs_wait_marked_extents()
return the actual error if when filemap_fdata<write|wait>_range() fails.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
