summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-25vxlan: do not modify the shared tunnel info when PMTU triggers an ICMP replyAntoine Tenart
When the interface is part of a bridge or an Open vSwitch port and a packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When using the external mode (collect metadata) the source and destination addresses are reversed, so that Open vSwitch can match the packet against an existing (reverse) flow. But inverting the source and destination addresses in the shared ip_tunnel_info will make following packets of the flow to use a wrong destination address (packets will be tunnelled to itself), if the flow isn't updated. Which happens with Open vSwitch, until the flow times out. Fixes this by uncloning the skb's ip_tunnel_info before inverting its source and destination addresses, so that the modification will only be made for the PTMU packet, not the following ones. Fixes: fc68c99577cc ("vxlan: Support for PMTU discovery on directly bridged links") Tested-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge branch 'nfc-fixes'David S. Miller
Xiaoming Ni says: ==================== nfc: fix Resource leakage and endless loop fix Resource leakage and endless loop in net/nfc/llcp_sock.c, reported by "kiyin(尹亮)". Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 ==================== math: Export mul_u64_u64_div_u64 Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25nfc: Avoid endless loops caused by repeated llcp_sock_connect()Xiaoming Ni
When sock_wait_state() returns -EINPROGRESS, "sk->sk_state" is LLCP_CONNECTING. In this case, llcp_sock_connect() is repeatedly invoked, nfc_llcp_sock_link() will add sk to local->connecting_sockets twice. sk->sk_node->next will point to itself, that will make an endless loop and hang-up the system. To fix it, check whether sk->sk_state is LLCP_CONNECTING in llcp_sock_connect() to avoid repeated invoking. Fixes: b4011239a08e ("NFC: llcp: Fix non blocking sockets connections") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.11 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25nfc: fix memory leak in llcp_sock_connect()Xiaoming Ni
In llcp_sock_connect(), use kmemdup to allocate memory for "llcp_sock->service_name". The memory is not released in the sock_unlink label of the subsequent failure branch. As a result, memory leakage occurs. fix CVE-2020-25672 Fixes: d646960f7986 ("NFC: Initial LLCP support") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.3 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25nfc: fix refcount leak in llcp_sock_connect()Xiaoming Ni
nfc_llcp_local_get() is invoked in llcp_sock_connect(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25671 Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25nfc: fix refcount leak in llcp_sock_bind()Xiaoming Ni
nfc_llcp_local_get() is invoked in llcp_sock_bind(), but nfc_llcp_local_put() is not invoked in subsequent failure branches. As a result, refcount leakage occurs. To fix it, add calling nfc_llcp_local_put(). fix CVE-2020-25670 Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reported-by: "kiyin(尹亮)" <kiyin@tencent.com> Link: https://www.openwall.com/lists/oss-security/2020/11/01/1 Cc: <stable@vger.kernel.org> #v3.6 Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25amd-xgbe: Update DMA coherency valuesShyam Sundar S K
Based on the IOMMU configuration, the current cache control settings can result in possible coherency issues. The hardware team has recommended new settings for the PCI device path to eliminate the issue. Fixes: 6f595959c095 ("amd-xgbe: Adjust register settings to improve performance") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clockMartin Blumenstingl
The xMII interface clock depends on the PHY interface (MII, RMII, RGMII) as well as the current link speed. Explicitly configure the GSWIP to automatically select the appropriate xMII interface clock. This fixes an issue seen by some users where ports using an external RMII or RGMII PHY were deaf (no RX or TX traffic could be seen). Most likely this is due to an "invalid" xMII clock being selected either by the bootloader or hardware-defaults. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25dt-bindings: net: micrel-ksz90x1.txt: correct documentationDinh Nguyen
Correct the Micrel phy documentation for the ksz9021 and ksz9031 phys for how the phy skews are set. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: axienet: allow setups without MDIODaniel Mack
In setups with fixed-link settings there is no mdio node in DTS. axienet_probe() already handles that gracefully but lp->mii_bus is then NULL. Fix code that tries to blindly grab the MDIO lock by introducing two helper functions that make the locking conditional. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: dsa: only unset VLAN filtering when last port leaves last VLAN-aware bridgeVladimir Oltean
DSA is aware of switches with global VLAN filtering since the blamed commit, but it makes a bad decision when multiple bridges are spanning the same switch: ip link add br0 type bridge vlan_filtering 1 ip link add br1 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br0 ip link set swp4 master br1 ip link set swp5 master br1 ip link set swp5 nomaster ip link set swp4 nomaster [138665.939930] sja1105 spi0.1: port 3: dsa_core: VLAN filtering is a global setting [138665.947514] DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE When all ports leave br1, DSA blindly attempts to disable VLAN filtering on the switch, ignoring the fact that br0 still exists and is VLAN-aware too. It fails while doing that. This patch checks whether any port exists at all and is under a VLAN-aware bridge. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge tag 'integrity-v5.12-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fix from Mimi Zohar: "Just one patch to address a NULL ptr dereferencing when there is a mismatch between the user enabled LSMs and IMA/EVM" * tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: double check iint_cache was initialized
2021-03-25hostfs: fix memory handling in follow_link()Al Viro
1) argument should not be freed in any case - the caller already has it as ->s_fs_info (and uses it a lot afterwards) 2) allocate readlink buffer with kmalloc() - the caller has no way to tell if it's got that (on absolute symlink) or a result of kasprintf(). Sure, for SLAB and SLUB kfree() works on results of kmem_cache_alloc(), but that's not documented anywhere, might change in the future *and* is already not true for SLOB. Fixes: 52b209f7b848 ("get rid of hostfs_read_inode()") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-03-25Merge tag 'for-5.12-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Fixes for issues that have some user visibility and are simple enough for this time of development cycle: - a few fixes for rescue= mount option, adding more checks for missing trees - fix sleeping in atomic context on qgroup deletion - fix subvolume deletion on mount - fix build with M= syntax - fix checksum mismatch error message for direct io" * tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix check_data_csum() error message for direct I/O btrfs: fix sleep while in non-sleep context during qgroup removal btrfs: fix subvolume/snapshot deletion not triggered on mount btrfs: fix build when using M=fs/btrfs btrfs: do not initialize dev replace for bad dev root btrfs: initialize device::fs_info always btrfs: do not initialize dev stats if we have no dev_root btrfs: zoned: remove outdated WARN_ON in direct IO
2021-03-25s390/vdso: fix initializing and updating of vdso_dataHeiko Carstens
Li Wang reported that clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns incorrect values when time is provided via vdso instead of system call: vdso_ts_nsec = 4484351380985507, vdso_ts.tv_sec = 4484351, vdso_ts.tv_nsec = 380985507 sys_ts_nsec = 1446923235377, sys_ts.tv_sec = 1446, sys_ts.tv_nsec = 923235377 Within the s390 specific vdso function __arch_get_hw_counter() reads tod clock steering values from the arch_data member of the passed in vdso_data structure. Problem is that only for the CS_HRES_COARSE vdso_data arch_data is initialized and gets updated. The CS_RAW specific vdso_data does not contain any valid tod_clock_steering information, which explains the different values. Fix this by initializing and updating all vdso_datas. Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Fixes: 1ba2d6c0fd4e ("s390/vdso: simplify __arch_get_hw_counter()") Link: https://lore.kernel.org/linux-s390/YFnxr1ZlMIOIqjfq@osiris Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25s390/vdso: fix tod_steering_delta typeHeiko Carstens
The s390 specific vdso function __arch_get_hw_counter() is supposed to consider tod clock steering. If a tod clock steering event happens and the tod clock is set to a new value __arch_get_hw_counter() will not return the real tod clock value but slowly drift it from the old delta until the returned value finally matches the real tod clock value again. Unfortunately the type of tod_steering_delta unsigned while it is supposed to be signed. It depends on if tod_steering_delta is negative or positive in which direction the vdso code drifts the clock value. Worst case is now that instead of drifting the clock slowly it will jump into the opposite direction by a factor of two. Fix this by simply making tod_steering_delta signed. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Cc: <stable@vger.kernel.org> # 5.10 Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25s390/vdso: copy tod_steering_delta value to vdso_data pageHeiko Carstens
When converting the vdso assembler code to C it was forgotten to actually copy the tod_steering_delta value to vdso_data page. Which in turn means that tod clock steering will not work correctly. Fix this by simply copying the value whenever it is updated. Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Cc: <stable@vger.kernel.org> # 5.10 Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-26Merge tag 'amd-drm-fixes-5.12-2021-03-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.12-2021-03-24: amdgpu: - S0ix fixes - Add PCI ID - Polaris PCIe DPM fix - Display fix for high refresh rate monitors Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324210630.3949-1-alexander.deucher@amd.com
2021-03-26Merge branch 'linux-5.12' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
- cursor size fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7js90N_PYc8JncQA9Hu0yjbg+vPw109FKxJ538nZ=fag@mail.gmail.com
2021-03-26Merge tag 'drm-intel-fixes-2021-03-25-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - DisplayPort LTTPR fixes around link training and limiting it according to supported spec version. (Imre) - Fix enabled_planes bitmask to really represent only logically enabled planes (Ville). - Fix DSS CTL registers for ICL DSI transcoders (Jani) - Fix the GT fence revocation runtime PM logic. (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YFxYdrjqeUtSu+3p@intel.com
2021-03-26Merge tag 'drm-misc-fixes-2021-03-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.12: - Use FOLL_FORCE and FOLL_LONGTERM in etnaviv Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/72d4c9ce-6709-4e0f-a715-79fdcebb48e7@linux.intel.com
2021-03-25i40e: Fix oops at i40e_rebuild()Arkadiusz Kubalewski
Setup TC before the i40e_setup_pf_switch() call. Memory must be initialized for all the queues before using its resources. Previously it could be possible that a call: xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, rx_ring->queue_index, rx_ring->q_vector->napi.napi_id); was made with q_vector being null. Oops could show up with the following sequence: - no driver loaded - FW LLDP agent is on (flag disable-fw-lldp:off) - link is up - DCB configured with number of Traffic Classes that will not divide completely the default number of queues (usually cpu cores) - driver load - set private flag: disable-fw-lldp:on Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25i40e: Fix kernel oops when i40e driver removes VF'sEryk Rybak
Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25io_uring: maintain CQE order of a failed linkPavel Begunkov
Arguably we want CQEs of linked requests be in a strict order of submission as it always was. Now if init of a request fails its CQE may be posted before all prior linked requests including the head of the link. Fix it by failing it last. Fixes: de59bc104c24f ("io_uring: fail links more in io_submit_sqe()") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b7a96b05832e7ab23ad55f84092a2548c4a888b0.1616699075.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-25vfio/type1: Empty batch for pfnmap pagesDaniel Jordan
When vfio_pin_pages_remote() returns with a partial batch consisting of a single VM_PFNMAP pfn, a subsequent call will unfortunately try restoring it from batch->pages, resulting in vfio mapping the wrong page and unbalancing the page refcount. Prevent the function from returning with this kind of partial batch to avoid the issue. There's no explicit check for a VM_PFNMAP pfn because it's awkward to do so, so infer it from characteristics of the batch instead. This may result in occasional false positives but keeps the code simpler. Fixes: 4d83de6da265 ("vfio/type1: Batch page pinning") Link: https://lkml.kernel.org/r/20210323133254.33ed9161@omen.home.shazbot.org/ Reported-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Message-Id: <20210325010552.185481-1-daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (hugetlb, kasan, gup, selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64, gcov, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: update Andrey Konovalov's email address mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm: memblock: fix section mismatch warning again kfence: make compatible with kmemleak gcov: fix clang-11+ support ia64: fix format strings for err_inject ia64: mca: allocate early mca with GFP_ATOMIC squashfs: fix xattr id and id lookup sanity checks squashfs: fix inode lookup sanity checks z3fold: prevent reclaim/free race for headless pages selftests/vm: fix out-of-tree build mm/mmu_notifiers: ensure range_end() is paired with range_start() kasan: fix per-page tags for non-page_alloc pages hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
2021-03-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Not much going on, just some small bug fixes: - Typo causing a regression in mlx5 devx - Regression in the recent hns rework causing the HW to get out of sync - Long-standing cxgb4 adaptor crash when destroying cm ids" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server RDMA/hns: Fix bug during CMDQ initialization RDMA/mlx5: Fix typo in destroy_mkey inbox
2021-03-25Merge tag 'mfd-fixes-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfs fix from Lee Jones: "Unconstify editable placeholder structures" * tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"
2021-03-25Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Minor fixes all over, ranging from typos to tests to errata workarounds: - Fix possible memory hotplug failure with KASLR - Fix FFR value in SVE kselftest - Fix backtraces reported in /proc/$pid/stack - Disable broken CnP implementation on NVIDIA Carmel - Typo fixes and ACPI documentation clarification - Fix some W=1 warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: disable CNP on Carmel arm64/process.c: fix Wmissing-prototypes build warnings kselftest/arm64: sve: Do not use non-canonical FFR register value arm64: mm: correct the inside linear map range during hotplug check arm64: kdump: update ppos when reading elfcorehdr arm64: cpuinfo: Fix a typo Documentation: arm64/acpi : clarify arm64 support of IBFT arm64: stacktrace: don't trace arch_stack_walk() arm64: csum: cast to the proper type
2021-03-25mailmap: update the email address for Chris ChiuChris Chiu
Redirect my older email addresses in the git logs. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25gfs2: report "already frozen/thawed" errorsBob Peterson
Before this patch, gfs2's freeze function failed to report an error when the target file system was already frozen as it should (and as generic vfs function freeze_super does. Similarly, gfs2's thaw function failed to report an error when trying to thaw a file system that is not frozen, as vfs function thaw_super does. The errors were checked, but it always returned a 0 return code. This patch adds the missing error return codes to gfs2 freeze and thaw. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2021-03-25i40e: Added Asym_Pause to supported link modesMateusz Palczewski
Add Asym_Pause to supported link modes (it is supported by HW). Lack of Asym_Pause in supported modes can cause several problems, i.e. it won't be possible to turn the autonegotiation on with asymmetric pause settings (i.e. Tx on, Rx off). Fixes: 4e91bcd5d47a ("i40e: Finish implementation of ethtool get settings") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25virtchnl: Fix layout of RSS structuresNorbert Ciosek
Remove padding from RSS structures. Previous layout could lead to unwanted compiler optimizations in loops when iterating over key and lut arrays. Fixes: 65ece6de0114 ("virtchnl: Add missing explicit padding to structures") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25mailmap: update Andrey Konovalov's email addressAndrey Konovalov
Use my personal email, the @google.com one will stop functioning soon. Link: https://lkml.kernel.org/r/ead0e9c32a2f70e0bde6f63b3b9470e0ef13d2ee.1616107969.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAPIra Weiny
The kernel test robot found that __kmap_local_sched_out() was not correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was set.[1] This was due to DEBUG_HIGHMEM check being used. Change the configuration check to be correct. [1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com Fixes: 0e91a0c6984c ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oliver Sang <oliver.sang@intel.com> Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Cc: David Sterba <dsterba@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25mm: memblock: fix section mismatch warning againMike Rapoport
Commit 34dc2efb39a2 ("memblock: fix section mismatch warning") marked memblock_bottom_up() and memblock_set_bottom_up() as __init, but they could be referenced from non-init functions like memblock_find_in_range_node() on architectures that enable CONFIG_ARCH_KEEP_MEMBLOCK. For such builds kernel test robot reports: WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up() The function memblock_find_in_range_node() references the function __init memblock_bottom_up(). This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong. Replace __init annotations with __init_memblock annotations so that the appropriate section will be selected depending on CONFIG_ARCH_KEEP_MEMBLOCK. Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org Fixes: 34dc2efb39a2 ("memblock: fix section mismatch warning") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25kfence: make compatible with kmemleakMarco Elver
Because memblock allocations are registered with kmemleak, the KFENCE pool was seen by kmemleak as one large object. Later allocations through kfence_alloc() that were registered with kmemleak via slab_post_alloc_hook() would then overlap and trigger a warning. Therefore, once the pool is initialized, we can remove (free) it from kmemleak again, since it should be treated as allocator-internal and be seen as "free memory". The second problem is that kmemleak is passed the rounded size, and not the originally requested size, which is also the size of KFENCE objects. To avoid kmemleak scanning past the end of an object and trigger a KFENCE out-of-bounds error, fix the size if it is a KFENCE object. For simplicity, to avoid a call to kfence_ksize() in slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK) guard), just call kfence_ksize() in mm/kmemleak.c:create_object(). Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Luis Henriques <lhenriques@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25gcov: fix clang-11+ supportNick Desaulniers
LLVM changed the expected function signatures for llvm_gcda_start_file() and llvm_gcda_emit_function() in the clang-11 release. Users of clang-11 or newer may have noticed their kernels failing to boot due to a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y. Fix up the function signatures so calling these functions doesn't panic the kernel. Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041 Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44 Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Prasad Sodagudi <psodagud@quicinc.com> Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: <stable@vger.kernel.org> [5.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25ia64: fix format strings for err_injectSergei Trofimovich
Fix warning with %lx / u64 mismatch: arch/ia64/kernel/err_inject.c: In function 'show_resources': arch/ia64/kernel/err_inject.c:62:22: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' {aka 'long long unsigned int'} 62 | return sprintf(buf, "%lx", name[cpu]); \ | ^~~~~~~ Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25ia64: mca: allocate early mca with GFP_ATOMICSergei Trofimovich
The sleep warning happens at early boot right at secondary CPU activation bootup: smp: Bringing up secondary CPUs ... BUG: sleeping function called from invalid context at mm/page_alloc.c:4942 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99 .. Call Trace: show_stack+0x90/0xc0 dump_stack+0x150/0x1c0 ___might_sleep+0x1c0/0x2a0 __might_sleep+0xa0/0x160 __alloc_pages_nodemask+0x1a0/0x600 alloc_page_interleave+0x30/0x1c0 alloc_pages_current+0x2c0/0x340 __get_free_pages+0x30/0xa0 ia64_mca_cpu_init+0x2d0/0x3a0 cpu_init+0x8b0/0x1440 start_secondary+0x60/0x700 start_ap+0x750/0x780 Fixed BSP b0 value from CPU 1 As I understand interrupts are not enabled yet and system has a lot of memory. There is little chance to sleep and switch to GFP_ATOMIC should be a no-op. Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25squashfs: fix xattr id and id lookup sanity checksPhillip Lougher
The checks for maximum metadata block size is missing SQUASHFS_BLOCK_OFFSET (the two byte length count). Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk Fixes: f37aa4c7366e23f ("squashfs: add more sanity checks in id lookup") Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: Sean Nyekjaer <sean@geanix.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25squashfs: fix inode lookup sanity checksSean Nyekjaer
When mouting a squashfs image created without inode compression it fails with: "unable to read inode lookup table" It turns out that the BLOCK_OFFSET is missing when checking the SQUASHFS_METADATA_SIZE agaist the actual size. Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com Fixes: eabac19e40c0 ("squashfs: add more sanity checks in inode lookup") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25z3fold: prevent reclaim/free race for headless pagesThomas Hebb
Commit ca0246bb97c2 ("z3fold: fix possible reclaim races") introduced the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page release." By atomically testing and setting the bit in each of z3fold_free() and z3fold_reclaim_page(), a double-free was avoided. However, commit dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim") appears to have unintentionally broken this behavior by moving the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock gets taken, which only happens for non-headless pages. For headless pages, the check is now skipped entirely and races can occur again. I have observed such a race on my system: page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316 flags: 0x2ffff0000000000() raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000 raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:707! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G B 5.10.7-arch1-1-kasan #1 Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016 Workqueue: zswap-shrink shrink_worker RIP: 0010:__free_pages+0x10a/0x130 Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07 RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000 RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8 RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4 R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588 FS: 0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0 Call Trace: z3fold_zpool_shrink+0x9b6/0x1240 shrink_worker+0x35/0x90 process_one_work+0x70c/0x1210 worker_thread+0x539/0x1200 kthread+0x330/0x400 ret_from_fork+0x22/0x30 Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart ---[ end trace 126d646fc3dc0ad8 ]--- To fix the issue, re-add the earlier test and set in the case where we have a headless page. Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com Fixes: dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Jongseok Kim <ks77sj@gmail.com> Cc: Snild Dolkow <snild@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25selftests/vm: fix out-of-tree buildRong Chen
When building out-of-tree, attempting to make target from $(OUTPUT) directory: make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'. Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com Signed-off-by: Rong Chen <rong.a.chen@intel.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25mm/mmu_notifiers: ensure range_end() is paired with range_start()Sean Christopherson
If one or more notifiers fails .invalidate_range_start(), invoke .invalidate_range_end() for "all" notifiers. If there are multiple notifiers, those that did not fail are expecting _start() and _end() to be paired, e.g. KVM's mmu_notifier_count would become imbalanced. Disallow notifiers that can fail _start() from implementing _end() so that it's unnecessary to either track which notifiers rejected _start(), or had already succeeded prior to a failed _start(). Note, the existing behavior of calling _start() on all notifiers even after a previous notifier failed _start() was an unintented "feature". Make it canon now that the behavior is depended on for correctness. As of today, the bug is likely benign: 1. The only caller of the non-blocking notifier is OOM kill. 2. The only notifiers that can fail _start() are the i915 and Nouveau drivers. 3. The only notifiers that utilize _end() are the SGI UV GRU driver and KVM. 4. The GRU driver will never coincide with the i195/Nouveau drivers. 5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the _guest_, and the guest is already doomed due to being an OOM victim. Fix the bug now to play nice with future usage, e.g. KVM has a potential use case for blocking memslot updates in KVM while an invalidation is in-progress, and failure to unblock would result in said updates being blocked indefinitely and hanging. Found by inspection. Verified by adding a second notifier in KVM that periodically returns -EAGAIN on non-blockable ranges, triggering OOM, and observing that KVM exits with an elevated notifier count. Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") Signed-off-by: Sean Christopherson <seanjc@google.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: David Rientjes <rientjes@google.com> Cc: Ben Gardon <bgardon@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25kasan: fix per-page tags for non-page_alloc pagesAndrey Konovalov
To allow performing tag checks on page_alloc addresses obtained via page_address(), tag-based KASAN modes store tags for page_alloc allocations in page->flags. Currently, the default tag value stored in page->flags is 0x00. Therefore, page_address() returns a 0x00ffff... address for pages that were not allocated via page_alloc. This might cause problems. A particular case we encountered is a conflict with KFENCE. If a KFENCE-allocated slab object is being freed via kfree(page_address(page) + offset), the address passed to kfree() will get tagged with 0x00 (as slab pages keep the default per-page tags). This leads to is_kfence_address() check failing, and a KFENCE object ending up in normal slab freelist, which causes memory corruptions. This patch changes the way KASAN stores tag in page-flags: they are now stored xor'ed with 0xff. This way, KASAN doesn't need to initialize per-page flags for every created page, which might be slow. With this change, page_address() returns natively-tagged (with 0xff) pointers for pages that didn't have tags set explicitly. This patch fixes the encountered conflict with KFENCE and prevents more similar issues that can occur in the future. Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappingsMiaohe Lin
The current implementation of hugetlb_cgroup for shared mappings could have different behavior. Consider the following two scenarios: 1.Assume initial css reference count of hugetlb_cgroup is 1: 1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference count is 2 associated with 1 file_region. 1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference count is 3 associated with 2 file_region. 1.3 coalesce_file_region will coalesce these two file_regions into one. So css reference count is 3 associated with 1 file_region now. 2.Assume initial css reference count of hugetlb_cgroup is 1 again: 2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference count is 2 associated with 1 file_region. Therefore, we might have one file_region while holding one or more css reference counts. This inconsistency could lead to imbalanced css_get() and css_put() pair. If we do css_put one by one (i.g. hole punch case), scenario 2 would put one more css reference. If we do css_put all together (i.g. truncate case), scenario 1 will leak one css reference. The imbalanced css_get() and css_put() pair would result in a non-zero reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup directory is removed __but__ associated resource is not freed. This might result in OOM or can not create a new hugetlb cgroup in a busy workload ultimately. In order to fix this, we have to make sure that one file_region must hold exactly one css reference. So in coalesce_file_region case, we should release one css reference before coalescence. Also only put css reference when the entire file_region is removed. The last thing to note is that the caller of region_add() will only hold one reference to h_cg->css for the whole contiguous reservation region. But this area might be scattered when there are already some file_regions reside in it. As a result, many file_regions may share only one h_cg->css reference. In order to ensure that one file_region must hold exactly one css reference, we should do css_get() for each file_region and release the reference held by caller when they are done. [linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings] Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings") Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR) Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Wanpeng Li <liwp.linux@gmail.com> Cc: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-25io-wq: fix race around pending work on teardownJens Axboe
syzbot reports that it's triggering the warning condition on having pending work on shutdown: WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_destroy fs/io-wq.c:1061 [inline] WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_put+0x153/0x260 fs/io-wq.c:1072 Modules linked in: CPU: 1 PID: 12346 Comm: syz-executor.5 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_wq_destroy fs/io-wq.c:1061 [inline] RIP: 0010:io_wq_put+0x153/0x260 fs/io-wq.c:1072 Code: 8d e8 71 90 ea 01 49 89 c4 41 83 fc 40 7d 4f e8 33 4d 97 ff 42 80 7c 2d 00 00 0f 85 77 ff ff ff e9 7a ff ff ff e8 1d 4d 97 ff <0f> 0b eb b9 8d 6b ff 89 ee 09 de bf ff ff ff ff e8 18 51 97 ff 09 RSP: 0018:ffffc90001ebfb08 EFLAGS: 00010293 RAX: ffffffff81e16083 RBX: ffff888019038040 RCX: ffff88801e86b780 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000040 RBP: 1ffff1100b2f8a80 R08: ffffffff81e15fce R09: ffffed100b2f8a82 R10: ffffed100b2f8a82 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffff8880597c5400 R15: ffff888019038000 FS: 00007f8dcd89c700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e9a054e160 CR3: 000000001dfb8000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_uring_clean_tctx+0x1b7/0x210 fs/io_uring.c:8802 __io_uring_files_cancel+0x13c/0x170 fs/io_uring.c:8820 io_uring_files_cancel include/linux/io_uring.h:47 [inline] do_exit+0x258/0x2340 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x1734/0x1ef0 kernel/signal.c:2773 arch_do_signal_or_restart+0x3c/0x610 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x48/0x180 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x465f69 which shouldn't happen, but seems to be possible due to a race on whether or not the io-wq manager sees a fatal signal first, or whether the io-wq workers do. If we race with queueing work and then send a fatal signal to the owning task, and the io-wq worker sees that before the manager sets IO_WQ_BIT_EXIT, then it's possible to have the worker exit and leave work behind. Just turn the WARN_ON_ONCE() into a cancelation condition instead. Reported-by: syzbot+77a738a6bc947bf639ca@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-25ASoC: max98373: Added 30ms turn on/off time delayRyan Lee
Amp requires 10 ~ 30ms for the power ON and OFF. Added 30ms delay for stability. Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20210325033555.29377-2-ryans.lee@maximintegrated.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25ASoC: max98373: Changed amp shutdown register as volatileRyan Lee
0x20FF(amp global enable) register was defined as non-volatile, but it is not. Overheating, overcurrent can cause amp shutdown in hardware. 'regmap_write' compare register readback value before writing to avoid same value writing. 'regmap_read' just read cache not actual hardware value for the non-volatile register. When amp is internally shutdown by some reason, next 'AMP ON' command can be ignored because regmap think amp is already ON. Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20210325033555.29377-1-ryans.lee@maximintegrated.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 12:49:53 +0000