| Age | Commit message (Collapse) | Author |
|---|
|
Use consistent terminology and structured RST elements to better document
these two oddball instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-4-hch@lst.de
|
|
Add a separate section and a little intro blurb for the regular load and
store instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-3-hch@lst.de
|
|
Add a section to document the byte swapping instructions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220131183638.3934982-2-hch@lst.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Eric's fix for a long standing cgroup1 permission issue where it only
checks for uid 0 instead of CAP which inadvertently allows
unprivileged userns roots to modify release_agent userhelper
- Fixes for the fallout from Waiman's recent cpuset work
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
cgroup-v1: Require capabilities to set release_agent
cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
|
|
Alex Elder says:
====================
net: ipa: enable register retention
With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse. This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================
Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Andrii Nakryiko says:
====================
Clean up remaining missed uses of deprecated libbpf APIs across samples/bpf,
selftests/bpf, libbpf, and bpftool.
Also fix uninit variable warning in bpftool.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Remove all the remaining uses of deprecated bpf_prog_load_xattr() API.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-7-andrii@kernel.org
|
|
Switch to using new bpf_xdp_*() APIs across all selftests. Take
advantage of a more straightforward and user-friendly semantics of
old_prog_fd (0 means "don't care") in few places.
This is a redo of 544356524dd6 ("selftests/bpf: switch to new libbpf XDP
APIs"), which was previously reverted to minimize conflicts during bpf
and bpf-next tree merge.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-6-andrii@kernel.org
|
|
Switch to libbpf_probe_*() APIs instead of the deprecated ones.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-5-andrii@kernel.org
|
|
Newer GCC complains about capturing the address of unitialized variable.
While there is nothing wrong with the code (the variable is filled out
by the kernel), initialize the variable anyway to make compiler happy.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-4-andrii@kernel.org
|
|
libbpf 1.0 is not going to support passing ifindex to BPF
prog/map/helper feature probing APIs. Remove the support for BPF offload
feature probing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-3-andrii@kernel.org
|
|
Open-code bpf_map__is_offload_neutral() logic in one place in
to-be-deprecated bpf_prog_load_xattr2.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220202225916.3313522-2-andrii@kernel.org
|
|
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
|
|
This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a
That commit did a refactoring that effectively combined fast and slow
gup paths (again). And that was again incorrect, for two reasons:
a) Fast gup and slow gup get reference counts on pages in different
ways and with different goals: see Linus' writeup in commit
cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call
try_get_compound_head() directly""), and
b) try_grab_compound_head() also has a specific check for
"FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
can fall back to slow gup. This resulted in new failures, as
recently report by Will McVicker [1].
But (a) has problems too, even though they may not have been reported
yet. So just revert this.
Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1]
Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix missed change for PTR->PTR_WD conversion
- kernel-doc fixes
* tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: KVM: fix vz.c kernel-doc notation
MIPS: octeon: Fix missed PTR->PTR_WD conversion
|
|
Russell King says:
====================
net: dsa: mv88e6xxx: convert to phylink_generic_validate()
The overall objective of this series is to convert the mv88e6xxx DSA
driver to use phylink_generic_validate().
Patch 1 adds a new helper mv88e6352_g2_scratch_port_has_serdes() which
indicates whether an 88e6352 port has a serdes associated with it. This
is necessary as ports 4 and 5 will normally be in automedia mode, where
the CMODE field in the port status register will change e.g. between 15
(internal PHY) and 9 (1000base-X) depending on whether the serdes has
link.
The existing code caches the cmode field, and depending whether the
serdes has link at probe time, determines whether we allow things such
as the serdes statistics to be accessed. This means if the link isn't
up at probe time, the serdes is essentially unavailable.
Patch 1 addresses this by reading the pin configuration to find out
whether the serdes is attached to port 4 or port 5.
Patch 2 is a joint effort between myself and Marek Behún, adding the
supported interfaces and MAC capabilities to all mv88e6xxx supported
switch devices. This is slightly more restrictive than the original
code as we didn't used to care too much about the interface mode, but
with this we do - which is why we must know if there's a serdes
associated now.
Patch 3 switches mv88e6xxx to use the generic validation by removing
the initialisation of the phylink_validate pointer in the dsa_ops
struct.
Patch 4 updates the statistics code to use the new helper in patch 1,
so the serdes statistics are available even if the link was down at
driver probe time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The decision whether to report serdes statistics currently depends on
the cached C_Mode value for the port, read at probe time or updated by
configuration. However, port 4 can be in "automedia" mode when it is
used as a serdes port, meaning it switches between the internal PHY and
the serdes, changing the read-only C_Mode value depending on which
first gains link. Consequently, the C_Mode value read at probe does not
accurately reflect whether the port has the serdes associated with it.
In "net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()",
we added a way to read the hardware configuration to determine which
port has the serdes associated with it. Use this to determine which
port reports the serdes statistics.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the mv88e6xxx chip drivers are supplying the supported
interfaces and MAC capabilities, switch the driver to use the generic
phylink validation implementation by removing our own validation
implementations. This causes DSA to call phylink_generic_validate()
on our behalf.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the
Marvell MV88E6xxx DSA switches in preparation to using these for the
validation functionality.
Patch co-authored by Marek.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org> [ fixed 6341 and 6393x ]
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Read the hardware configuration to determine which port is attached
to the serdes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tobias Waldekranz says:
====================
net: dsa: mv88e6xxx: Improve standalone port isolation
The ideal isolation between standalone ports satisfies two properties:
1. Packets from one standalone port must not be forwarded to any other
port.
2. Packets from a standalone port must be sent to the CPU port.
mv88e6xxx solves (1) by isolating standalone ports using the PVT. Up
to this point though, (2) has not guaranteed; as the ATU is still
consulted, there is a chance that incoming packets never reach the CPU
if its DA has previously been used as the SA of an earlier packet (see
1/5 for more details). This is typically not a problem, except for one
very useful setup in which switch ports are looped in order to run the
bridge kselftests in tools/testing/selftests/net/forwarding. This
series attempts to solve (2).
Ideally, we could simply use the "ForceMap" bit of more modern chips
(Agate and newer) to classify all incoming packets as MGMT. This is
not available on older silicon that is still widely used (Opal Plus
chips like the 6097 for example).
Instead, this series takes a two pronged approach:
1/5: Always clear MapDA on standalone ports to make sure that no ATU
entry can lead packets astray. This solves (2) for single-chip
systems.
2/5: Trivial prep work for 4/5.
3/5: Trivial prep work for 4/5.
4/5: On multi-chip systems though, this is not enough. On the incoming
chip, the packet will be forced out towards the CPU thanks to
1/5, but on any intermediate chips the ATU is still consulted. We
override this behavior by marking the reserved standalone VID (0)
as a policy VID, the DSA ports' VID policy is set to TRAP. This
will cause the packet to be reclassified as MGMT on the first
intermediate chip, after which it's a straight shot towards the
CPU.
Finally, we allow more tests to be run on mv88e6xxx:
5/5: The bridge_vlan{,un}aware suites sets an ageing_time of 10s on
the bridge it creates, but mv88e6xxx has a minimum supported time
of 15s. Allow this time to be overridden in forwarding.config.
With this series in place, mv88e6xxx passes the following kselftest
suites:
- bridge_port_isolation.sh
- bridge_sticky_fdb.sh
- bridge_vlan_aware.sh
- bridge_vlan_unaware.sh
v1 -> v2:
- Wording/spelling (Vladimir)
- Use standard iterator in dsa_switch_upstream_port (Vladimir)
- Limit enabling of VTU port policy to downstream DSA ports (Vladimir)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the ageing timeout that is set on bridges to be customized from
forwarding.config. This allows the tests to be run on hardware which
does not support a 10s timeout (e.g. mv88e6xxx).
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Given that standalone ports are now configured to bypass the ATU and
forward all frames towards the upstream port, extend the ATU bypass to
multichip systems.
Load VID 0 (standalone) into the VTU with the policy bit set. Since
VID 4095 (bridged) is already loaded, we now know that all VIDs in use
are always available in all VTUs. Therefore, we can safely enable
802.1Q on DSA ports.
Setting the DSA ports' VTU policy to TRAP means that all incoming
frames on VID 0 will be classified as MGMT - as a result, the ATU is
bypassed on all subsequent switches.
With this isolation in place, we are able to support configurations
that are simultaneously very quirky and very useful. Quirky because it
involves looping cables between local switchports like in this
example:
CPU
| .------.
.---0---. | .----0----.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-3-4-'
$ @ '---' $ @ % %
We have three physically looped pairs ($, @, and %).
This is very useful because it allows us to run the kernel's
kselftests for the bridge on mv88e6xxx hardware.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A VTU entry with policy enabled is used in combination with a port's
VTU policy setting to override normal switching behavior for frames
assigned to the entry's VID.
A typical example is to Treat all frames in a particular VLAN as
control traffic, and trap them to the CPU. In which case the relevant
user port's VTU policy would be set to TRAP.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear MapDA on standalone ports to bypass any ATU lookup that might
point the packet in the wrong direction. This means that all packets
are flooded using the PVT config. So make sure that standalone ports
are only allowed to communicate with the local upstream port.
Here is a scenario in which this is needed:
CPU
| .----.
.---0---. | .--0--.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-'
'---'
- sw0p1 and sw1p1 are bridged
- sw0p2 and sw1p2 are in standalone mode
- Learning must be enabled on sw0p3 in order for hardware forwarding
to work properly between bridged ports
1. A packet with SA :aa comes in on sw1p2
1a. Egresses sw1p0
1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3
1c. Egresses sw0p0
2. A packet with DA :aa comes in on sw0p2
2a. If an ATU lookup is done at this point, the packet will be
incorrectly forwarded towards sw0p3. With this change in place,
the ATU is bypassed and the packet is forwarded in accordance
with the PVT, which only contains the CPU port.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miroslav Lichvar says:
====================
Virtual PTP clock improvements and fix
v2:
- dropped patch changing initial time of virtual clocks
The first patch fixes an oops when unloading a driver with PTP clock and
enabled virtual clocks.
The other patches add missing features to make synchronization with
virtual clocks work as well as with the physical clock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the physical clock supports cross timestamping (it has the
getcrosststamp() function), provide a wrapper in the virtual clock to
enable cross timestamping.
This adds support for the PTP_SYS_OFFSET_PRECISE ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the physical clock has the gettimex64() function, provide a
gettimex64() wrapper in the virtual clock to enable more accurate
and stable synchronization.
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Increase the maximum frequency offset of virtual clocks to 50% to enable
faster slewing corrections.
This value cannot be represented as scaled ppm when long has 32 bits,
but that is already the case for other drivers, even those that provide
the adjfine() function, i.e. 32-bit applications are expected to check
for the limit.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change is meant to permit a driver to perform "fragmenting" of the
page from within the driver instead of the current model which requires
pre-partitioning the page. The main motivation behind this is to support
use cases where the page will be split up by the driver after DMA instead
of before.
With this change it becomes possible to start using page pool to replace
some of the existing use cases where multiple references were being used
for a single page, but the number needed was unknown as the size could be
dynamic.
For example, with this code it would be possible to do something like
the following to handle allocation:
page = page_pool_alloc_pages();
if (!page)
return NULL;
page_pool_fragment_page(page, DRIVER_PAGECNT_BIAS_MAX);
rx_buf->page = page;
rx_buf->pagecnt_bias = DRIVER_PAGECNT_BIAS_MAX;
Then we would process a received buffer by handling it with:
rx_buf->pagecnt_bias--;
Once the page has been fully consumed we could then flush the remaining
instances with:
if (page_pool_defrag_page(page, rx_buf->pagecnt_bias))
continue;
page_pool_put_defragged_page(pool, page -1, !!budget);
The general idea is that we want to have the ability to allocate a page
with excess fragment count and then trim off the unneeded fragments.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
Trivial DSA conversions to phylink_generic_validate()
This series converts five DSA drivers to use phylink_generic_validate().
No feedback or testing reports were received from the CFT posting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the xrs700x
family of DSA switches and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.
According to commit ee00b24f32eb ("net: dsa: add Arrow SpeedChips
XRS700x driver") the switch supports one RMII port and up to three
RGMII ports. This commit assumes that port 0 is the RMII port and the
remainder are RGMII.
This commit also results in the Autoneg bit being set in the ethtool
link modes, which wasn't in the original; if this switch supports
RGMII to a 10/100/1G PHY, then surely we want to allow Autoneg on the
PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the QCA8K
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
In making this change, we bring consistency to the ethtool linkmodes
that phylink's validate step produces, thereby following the expected
behaviour as the phylink documentation has explained. Specifically, the
ethtool 1000baseX_Full capability is now permitted for all interface
modes, as it is a property of the PHY driver whether 1000baseX fiber
connections can be supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the
Microchip KSZ8795 DSA switch and remove the old validate implementation
to allow DSA to use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the bcm_sf2
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII and Reverse MII links is
handled within phylink_generic_validate() in phylink, so there is no
need to make them conditional on the interface mode in the driver.
Thanks to Florian Fainelli for suggesting how to populate the supported
interfaces.
Link: https://lore.kernel.org/r/3b3fed98-0c82-99e9-dc72-09fe01c2bcf3@gmail.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the AR9331
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.18
Patch 1 has some minor cleanup in mptcp_write_options().
Patch 2 moves a rarely-needed branch to optimize mptcp_write_options().
Patch 3 adds a comment explaining which combinations of MPTCP option
headers are expected.
Patch 4 adds a pr_debug() for the MPTCP_RST option.
Patches 5-7 allow setting MPTCP_PM_ADDR_FLAG_FULLMESH with the "set
flags" netlink command. This allows changing the behavior of existing
path manager endpoints. The flag was previously only set at endpoint
creation time. Associated selftests also updated.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh setting and clearing selftests in
mptcp_join.sh.
Now we can set both backup and fullmesh flags, so avoid using the
words 'backup' and 'bkup'.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh flag setting and clearing support in
pm_nl_ctl:
# pm_nl_ctl set ip flags fullmesh
# pm_nl_ctl set ip flags nofullmesh
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh flag setting support in pm_netlink.
If the fullmesh flag of the address is changed, remove all the related
subflows, update the fullmesh flag and create subflows again.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch printed out the reset infos, reset_transient and reset_reason,
of MP_RST in mptcp_parse_option() to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC8684 doesn't seem to clearly specify which MPTCP options can be used
together.
Some options are mutually exclusive -- e.g. MP_CAPABLE and MP_JOIN --,
some can be used together -- e.g. DSS + MP_PRIO --, some can but we
prefer not to -- e.g. DSS + ADD_ADDR -- and some have to be used
together at some points -- e.g. MP_FAIL and DSS.
We need to clarify this as a base before allowing other modifications.
For example, does it make sense to send a RM_ADDR with an MPC or MPJ?
This remains open for possible future discussions.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MP_FAIL should be use in very rare cases, either when the TCP RST flag
is set -- with or without an MP_RST -- or with a DSS, see
mptcp_established_options().
Here, we do the same in mptcp_write_options().
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the declarations of ssk and subflow in MP_FAIL and MP_PRIO to the
beginning of the function mptcp_write_options().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.
After the change, info in /proc/vmallocinfo also changes from
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
[start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com
|
