summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-02Merge branch 'migrate from bpf_prog_test_run{,_xattr}'Andrii Nakryiko
Delyan Kratunov says: ==================== Fairly straight-forward mechanical transformation from bpf_prog_test_run and bpf_prog_test_run_xattr to the bpf_prog_test_run_opts goodness. I did a fair amount of drive-by CHECK/CHECK_ATTR cleanups as well, though certainly not everything possible. Primarily, I did not want to just change arguments to CHECK calls, though I had to do a bit more than that in some cases (overall, -119 CHECK calls and all CHECK_ATTR calls). v2 -> v3: Don't introduce CHECK_OPTS, replace CHECK/CHECK_ATTR usages we need to touch with ASSERT_* calls instead. Don't be prescriptive about the opts var name and keep old names where that would minimize unnecessary code churn. Drop _xattr-specific checks in prog_run_xattr and rename accordingly. v1 -> v2: Split selftests/bpf changes into two commits to appease the mailing list. ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2022-02-02libbpf: Deprecate bpf_prog_test_run_xattr and bpf_prog_test_runDelyan Kratunov
Deprecate non-extendable bpf_prog_test_run{,_xattr} in favor of OPTS-based bpf_prog_test_run_opts ([0]). [0] Closes: https://github.com/libbpf/libbpf/issues/286 Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-5-delyank@fb.com
2022-02-02bpftool: Migrate from bpf_prog_test_run_xattrDelyan Kratunov
bpf_prog_test_run is being deprecated in favor of the OPTS-based bpf_prog_test_run_opts. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-4-delyank@fb.com
2022-02-02selftests/bpf: Migrate from bpf_prog_test_run_xattrDelyan Kratunov
bpf_prog_test_run_xattr is being deprecated in favor of the OPTS-based bpf_prog_test_run_opts. We end up unable to use CHECK_ATTR so replace usages with ASSERT_* calls. Also, prog_run_xattr is now prog_run_opts. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-3-delyank@fb.com
2022-02-02selftests/bpf: Migrate from bpf_prog_test_runDelyan Kratunov
bpf_prog_test_run is being deprecated in favor of the OPTS-based bpf_prog_test_run_opts. We end up unable to use CHECK in most cases, so replace usages with ASSERT_* calls. Signed-off-by: Delyan Kratunov <delyank@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220202235423.1097270-2-delyank@fb.com
2022-02-02Merge branch 'net-ipa-support-variable-rx-buffer-size'Jakub Kicinski
Alex Elder says: ==================== net: ipa: support variable RX buffer size Specify the size of receive buffers used for RX endpoints in the configuration data, rather than using 8192 bytes for all of them. Increase the size of the AP receive buffer for the modem to 32KB. ==================== Link: https://lore.kernel.org/r/20220201153737.601149-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02net: ipa: set IPA v4.11 AP<-modem RX buffer size to 32KBAlex Elder
Increase the receive buffer size used for data received from the modem to 32KB, to improve download performance by allowing much greater aggregation. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02net: ipa: define per-endpoint receive buffer sizeAlex Elder
Allow RX endpoints to have differing receive buffer sizes. Define the receive buffer size in the configuration data, and use that rather than IPA_RX_BUFFER_SIZE when configuring the endpoint. Add verification in ipa_endpoint_data_valid_one() that the receive buffer specified for AP RX endpoints is both big enough to handle at least one full packet, and not so big in an aggregating endpoint that its size can't be represented when programming the hardware. Move aggr_byte_limit_max() up in "ipa_endpoint.c" so it can be used earlier in the file without a forward-reference. Initially we'll just keep the 8KB receive buffer size already in use for all AP RX endpoints.. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02net, neigh: Do not trigger immediate probes on NUD_FAILED from ↵Daniel Borkmann
neigh_managed_work syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]: kworker/0:16/14617 is trying to acquire lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 [...] but task is already holding lock: ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572 The neighbor entry turned to NUD_FAILED state, where __neigh_event_send() triggered an immediate probe as per commit cd28ca0a3dd1 ("neigh: reduce arp latency") via neigh_probe() given table lock was held. One option to fix this situation is to defer the neigh_probe() back to the neigh_timer_handler() similarly as pre cd28ca0a3dd1. For the case of NTF_MANAGED, this deferral is acceptable given this only happens on actual failure state and regular / expected state is NUD_VALID with the entry already present. The fix adds a parameter to __neigh_event_send() in order to communicate whether immediate probe is allowed or disallowed. Existing call-sites of neigh_event_send() default as-is to immediate probe. However, the neigh_managed_work() disables it via use of neigh_event_send_probe(). [0] <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2956 [inline] check_deadlock kernel/locking/lockdep.c:2999 [inline] validate_chain kernel/locking/lockdep.c:3788 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027 lock_acquire kernel/locking/lockdep.c:5639 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604 __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline] _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334 ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652 ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508 ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650 ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742 neigh_probe+0xc2/0x110 net/core/neighbour.c:1040 __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201 neigh_event_send include/net/neighbour.h:470 [inline] neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Fixes: 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries") Reported-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Tested-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()Eric Dumazet
tcp_shift_skb_data() might collapse three packets into a larger one. P_A, P_B, P_C -> P_ABC Historically, it used a single tcp_skb_can_collapse_to(P_A) call, because it was enough. In commit 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions"), this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B) But the now needed test over P_C has been missed. This probably broke MPTCP. Then later, commit 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") added an extra condition to tcp_skb_can_collapse(), but the missing call from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C might have different skb_zcopy_pure() status. Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions") Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02Merge tag 'nfsd-5.17-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable bug fixes: - Ensure SM_NOTIFY doesn't crash the NFS server host - Ensure NLM locks are cleaned up after client reboot - Fix a leak of internal NFSv4 lease information" * tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client. lockd: fix failure to cleanup client locks lockd: fix server crash on reboot of client holding lock
2022-02-02Merge tag 'fsnotify_for_v5.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify fix from Jan Kara: "Fix stale file descriptor in copy_event_to_user" * tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Fix stale file descriptor in copy_event_to_user()
2022-02-02Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "A single fix to an error seen on qemu due to a missing import" * tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Import missing importlib.abc
2022-02-02Merge tag 'pinctrl-v5.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Most interesting and urgent is the Intel stuff affecting Chromebooks and laptops. - Fix up group name building on the Intel Thunderbay - Fix interrupt problems on the Intel Cherryview - Fix some pin data on the Sunxi H616 - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the merge window - Fix an unexpected interrupt problem on the Intel Sunrisepoint - Fix a glitch when updating IRQ flags on all Intel pin controllers - Revert a Zynqmp patch to unify the pin naming, let's find some better solution - Fix some error paths in the Broadcom BCM2835 driver - Fix a Kconfig problem pertaining to the BCM63XX drivers - Fix the regmap support in the Microchip SGPIO driver" * tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: microchip-sgpio: Fix support for regmap pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP pinctrl: bcm2835: Fix a few error paths pinctrl: zynqmp: Revert "Unify pin naming" pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line pinctrl: intel: fix unexpected interrupt pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile pinctrl: sunxi: Fix H616 I2S3 pin data pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping pinctrl: thunderbay: rework loops looking for groups names pinctrl: thunderbay: comment process of building functions a bit
2022-02-02net: sparx5: do not refer to skb after passing it onSteen Hegelund
Do not try to use any SKB fields after the packet has been passed up in the receive stack. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02drivers: net: Replace acpi_bus_get_device()Rafael J. Wysocki
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/11918902.O9o76ZdvQC@kreacher Link: https://lore.kernel.org/r/11920660.O9o76ZdvQC@kreacher Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02selinux: fix double free of cond_list on error pathsVratislav Bendel
On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: stable@vger.kernel.org Signed-off-by: Vratislav Bendel <vbendel@redhat.com> [PM: fix line lengths in the description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-02-02Partially revert "net/smc: Add netlink net namespace support"Dmitry V. Levin
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4 ("net/smc: Add netlink net namespace support") introduced an ABI regression: since struct smc_diag_lgrinfo contains an object of type "struct smc_diag_linkinfo", offset of all subsequent members of struct smc_diag_lgrinfo was changed by that change. As result, applications compiled with the old version of struct smc_diag_linkinfo will receive garbage in struct smc_diag_lgrinfo.role if the kernel implements this new version of struct smc_diag_linkinfo. Fix this regression by reverting the part of commit 79d39fc503b4 that changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK interface which is good enough, so there is probably no need to touch the smc_diag ABI in the first place. Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02tcp: Use BPF timeout setting for SYN ACK RTOAkhmat Karakotov
When setting RTO through BPF program, some SYN ACK packets were unaffected and continued to use TCP_TIMEOUT_INIT constant. This patch adds timeout option to struct request_sock. Option is initialized with TCP_TIMEOUT_INIT and is reassigned through BPF using tcp_timeout_init call. SYN ACK retransmits now use newly added timeout option. Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Acked-by: Martin KaFai Lau <kafai@fb.com> v2: - Add timeout option to struct request_sock. Do not call tcp_timeout_init on every syn ack retransmit. v3: - Use unsigned long for min. Bound tcp_timeout_init to TCP_RTO_MAX. v4: - Refactor duplicate code by adding reqsk_timeout function. Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02Merge branch 'qca8k-mdio'David S. Miller
Ansuel Smith says: ==================== Add support for qca8k mdio rw in Ethernet packet The main reason for this is that we notice some routing problem in the switch and it seems assisted learning is needed. Considering mdio is quite slow due to the indirect write using this Ethernet alternative way seems to be quicker. The qca8k switch supports a special way to pass mdio read/write request using specially crafted Ethernet packet. This works by putting some defined data in the Ethernet header where the mac source and dst should be placed. The Ethernet type header is set to qca header and is set to a mdio read/write type. This is used to communicate to the switch that this is a special packet and should be parsed differently. Currently we use Ethernet packet for - MIB counter - mdio read/write configuration - phy read/write for each port Current implementation of this use completion API to wait for the packet to be processed by the tagger and has a timeout that fallback to the legacy mdio way and mutex to enforce one transaction at time. We now have connect()/disconnect() ops for the tagger. They are used to allocate priv data in the dsa priv. The header still has to be put in global include to make it usable by a dsa driver. They are called when the tag is connect to the dst and the data is freed using discconect on tagger change. (if someone wonder why the bind function is put at in the general setup function it's because tag is set in the cpu port where the notifier is still not available and we require the notifier to sen the tag_proto_connect() event. We now have a tag_proto_connect() for the dsa driver used to put additional data in the tagger priv (that is actually the dsa priv). This is called using a switch event DSA_NOTIFIER_TAG_PROTO_CONNECT. Current use for this is adding handler for the Ethernet packet to keep the tagger code as dumb as possible. The tagger priv implement only the handler for the special packet. All the other stuff is placed in the qca8k_priv and the tagger has to access it under lock. We use the new API from Vladimir to track if the master port is operational or not. We had to track many thing to reach a usable state. Checking if the port is UP is not enough and tracking a NETDEV_CHANGE is also not enough since it use also for other task. The correct way was both track for interface UP and if a qdisc was assigned to the interface. That tells us the port (and the tagger indirectly) is ready to accept and process packet. I tested this with multicpu port and with port6 set as the unique port and it's sad. It seems they implemented this feature in a bad way and this is only supported with cpu port0. When cpu port6 is the unique port, the switch doesn't send ack packet. With multicpu port, packet ack are not duplicated and only cpu port0 sends them. This is the same for the MIB counter. For this reason this feature is enabled only when cpu port0 is enabled and operational. v8: - Reworked to rolling counter for the seq_num - Reworked the hi/lo cache patch - Fix multiple missing skb free and mutex lock errors - Fix some spelling mistake - Add macro build check for mgmt packet size - Change some struct naming to make them more descriptive v7: - Rebase on net-next changes - Add bulk patches to speedup this even more v6: - Fix some error in ethtool handler caused by rebase/cleanup v5: - Adapt to new API fixes - Fix a wrong logic for noop - Add additional lock for master_state change - Limit mdio Ethernet to cpu port0 (switch limitation) - Add priority to these special packet - Move mdio cache to qca8k_priv v4: - Remove duplicate patch sent by mistake. v3: - Include MIB with Ethernet packet. - Include phy read/write with Ethernet packet. - Reorganize code with new API. - Introuce master tracking by Vladimir v2: - Address all suggestion from Vladimir. Try to generilize this with connect/disconnect function from the tagger and tag_proto_connect for the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: introduce qca8k_bulk_read/write functionAnsuel Smith
Introduce qca8k_bulk_read/write() function to use mgmt Ethernet way to read/write packet in bulk. Make use of this new function in the fdb function and while at it reduce the reg for fdb_read from 4 to 3 as the max bit for the ARL(fdb) table is 83 bits. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: add support for larger read/write size with mgmt EthernetAnsuel Smith
mgmt Ethernet packet can read/write up to 16byte at times. The len reg is limited to 15 (0xf). The switch actually sends and accepts data in 4 different steps of len values. Len steps: - 0: nothing - 1-4: first 4 byte - 5-6: first 12 byte - 7-15: all 16 byte In the alloc skb function we check if the len is 16 and we fix it to a len of 15. It the read/write function interest to extract the real asked data. The tagger handler will always copy the fully 16byte with a READ command. This is useful for some big regs like the fdb reg that are more than 4byte of data. This permits to introduce a bulk function that will send and request the entire entry in one go. Write function is changed and it does now require to pass the pointer to val to also handle array val. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: cache lo and hi for mdio writeAnsuel Smith
From Documentation, we can cache lo and hi the same way we do with the page. This massively reduce the mdio write as 3/4 of the time as we only require to write the lo or hi part for a mdio write. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: move page cache to driver privAnsuel Smith
There can be multiple qca8k switch on the same system. Move the static qca8k_current_page to qca8k_priv and make it specific for each switch. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: add support for phy read/write with mgmt EthernetAnsuel Smith
Use mgmt Ethernet also for phy read/write if availabale. Use a different seq number to make sure we receive the correct packet. On any error, we fallback to the legacy mdio read/write. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: add support for mib autocast in Ethernet packetAnsuel Smith
The switch can autocast MIB counter using Ethernet packet. Add support for this and provide a handler for the tagger. The switch will send packet with MIB counter for each port, the switch will use completion API to wait for the correct packet to be received and will complete the task only when each packet is received. Although the handler will drop all the other packet, we still have to consume each MIB packet to complete the request. This is done to prevent mixed data with concurrent ethtool request. connect_tag_protocol() is used to add the handler to the tag_qca tagger, master_state_change() use the MIB lock to make sure no MIB Ethernet is in progress. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: add support for mgmt read/write in Ethernet packetAnsuel Smith
Add qca8k side support for mgmt read/write in Ethernet packet. qca8k supports some specially crafted Ethernet packet that can be used for mgmt read/write instead of the legacy method uart/internal mdio. This add support for the qca8k side to craft the packet and enqueue it. Each port and the qca8k_priv have a special struct to put data in it. The completion API is used to wait for the packet to be received back with the requested data. The various steps are: 1. Craft the special packet with the qca hdr set to mgmt read/write mode. 2. Set the lock in the dedicated mgmt struct. 3. Increment the seq number and set it in the mgmt pkt 4. Reinit the completion. 5. Enqueue the packet. 6. Wait the packet to be received. 7. Use the data set by the tagger to complete the mdio operation. If the completion timeouts or the ack value is not true, the legacy mdio way is used. It has to be considered that in the initial setup mdio is still used and mdio is still used until DSA is ready to accept and tag packet. tag_proto_connect() is used to fill the required handler for the tagger to correctly parse and elaborate the special Ethernet mdio packet. Locking is added to qca8k_master_change() to make sure no mgmt Ethernet are in progress. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: qca8k: add tracking state of master portAnsuel Smith
MDIO/MIB Ethernet require the master port and the tagger availabale to correctly work. Use the new api master_state_change to track when master is operational or not and set a bool in qca8k_priv. We cache the first cached master available and we check if other cpu port are operational when the cached one goes down. This cached master will later be used by mdio read/write and mib request to correctly use the working function. qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only one that answers with the ack packet or sends MIB Ethernet packets. For this reason the master_state_change ignore CPU port6 and only checks CPU port0 if it's operational and enables this mode. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: add support for handling mgmt and MIB Ethernet packetAnsuel Smith
Add connect/disconnect helper to assign private struct to the DSA switch. Add support for Ethernet mgmt and MIB if the DSA driver provide an handler to correctly parse and elaborate the data. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: add define for handling MIB packetAnsuel Smith
Add struct to correctly parse a mib Ethernet packet. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: add define for handling mgmt Ethernet packetAnsuel Smith
Add all the required define to prepare support for mgmt read/write in Ethernet packet. Any packet of this type has to be dropped as the only use of these special packet is receive ack for an mgmt write request or receive data for an mgmt read request. A struct is used that emulates the Ethernet header but is used for a different purpose. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: enable promisc_on_master flagAnsuel Smith
Ethernet MDIO packets are non-standard and DSA master expects the first 6 octets to be the MAC DA. To address these kind of packet, enable promisc_on_master flag for the tagger. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: move define to include linux/dsaAnsuel Smith
Move tag_qca define to include dir linux/dsa as the qca8k require access to the tagger define to support in-band mdio read/write using ethernet packet. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: tag_qca: convert to FIELD macroAnsuel Smith
Convert driver to FIELD macro to drop redundant define. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: replay master state events in dsa_tree_{setup,teardown}_masterVladimir Oltean
In order for switch driver to be able to make simple and reliable use of the master tracking operations, they must also be notified of the initial state of the DSA master, not just of the changes. This is because they might enable certain features only during the time when they know that the DSA master is up and running. Therefore, this change explicitly checks the state of the DSA master under the same rtnl_mutex as we were holding during the dsa_master_setup() and dsa_master_teardown() call. The idea being that if the DSA master became operational in between the moment in which it became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment when we checked for the master being up, there is a chance that we would emit a ->master_state_change() call with no actual state change. We need to avoid that by serializing the concurrent netdevice event with us. If the netdevice event started before, we force it to finish before we begin, because we take rtnl_lock before making netdev_uses_dsa() return true. So we also handle that early event and do nothing on it. Similarly, if the dev_open() attempt is concurrent with us, it will attempt to take the rtnl_mutex, but we're holding it. We'll see that the master flag IFF_UP isn't set, then when we release the rtnl_mutex we'll process the NETDEV_UP notifier. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02net: dsa: provide switch operations for tracking the master stateVladimir Oltean
Certain drivers may need to send management traffic to the switch for things like register access, FDB dump, etc, to accelerate what their slow bus (SPI, I2C, MDIO) can already do. Ethernet is faster (especially in bulk transactions) but is also more unreliable, since the user may decide to bring the DSA master down (or not bring it up), therefore severing the link between the host and the attached switch. Drivers needing Ethernet-based register access already should have fallback logic to the slow bus if the Ethernet method fails, but that fallback may be based on a timeout, and the I/O to the switch may slow down to a halt if the master is down, because every Ethernet packet will have to time out. The driver also doesn't have the option to turn off Ethernet-based I/O momentarily, because it wouldn't know when to turn it back on. Which is where this change comes in. By tracking NETDEV_CHANGE, NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know the exact interval of time during which this interface is reliably available for traffic. Provide this information to switches so they can use it as they wish. An helper is added dsa_port_master_is_operational() to check if a master port is operational. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02Merge tag 'mlx5-fixes-2022-02-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-02-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. Sorry about the long series, but I had to move the top two patches from net-next to net to help avoiding a build break when kspp branch is merged into linus-next on next merge window. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-02Merge branch 'bpf-btf-dwarf5'Daniel Borkmann
Nathan Chancellor says: ==================== This series allows CONFIG_DEBUG_INFO_DWARF5 to be selected with CONFIG_DEBUG_INFO_BTF=y by checking the pahole version. The first four patches add CONFIG_PAHOLE_VERSION and scripts/pahole-version.sh to clean up all the places that pahole's version is transformed into a 3-digit form. The fourth patch adds a PAHOLE_VERSION dependency to DEBUG_INFO_DWARF5 so that there are no build errors when it is selected with DEBUG_INFO_BTF. I build tested Fedora's aarch64 and x86_64 config with ToT clang 14.0.0 and GCC 11 with CONFIG_DEBUG_INFO_DWARF5 enabled with both pahole 1.21 and 1.23. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2022-02-02lib/Kconfig.debug: Allow BTF + DWARF5 with pahole 1.21+Nathan Chancellor
Commit 98cd6f521f10 ("Kconfig: allow explicit opt in to DWARF v5") prevented CONFIG_DEBUG_INFO_DWARF5 from being selected when CONFIG_DEBUG_INFO_BTF is enabled because pahole had issues with clang's DWARF5 info. This was resolved by [1], which is in pahole v1.21. Allow DEBUG_INFO_DWARF5 to be selected with DEBUG_INFO_BTF when using pahole v1.21 or newer. [1]: https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=7d8e829f636f47aba2e1b6eda57e74d8e31f733c Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-6-nathan@kernel.org
2022-02-02lib/Kconfig.debug: Use CONFIG_PAHOLE_VERSIONNathan Chancellor
Now that CONFIG_PAHOLE_VERSION exists, use it in the definition of CONFIG_PAHOLE_HAS_SPLIT_BTF and CONFIG_PAHOLE_HAS_BTF_TAG to reduce the amount of duplication across the tree. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-5-nathan@kernel.org
2022-02-02scripts/pahole-flags.sh: Use pahole-version.shNathan Chancellor
Use pahole-version.sh to get pahole's version code to reduce the amount of duplication across the tree. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-4-nathan@kernel.org
2022-02-02kbuild: Add CONFIG_PAHOLE_VERSIONNathan Chancellor
There are a few different places where pahole's version is turned into a three digit form with the exact same command. Move this command into scripts/pahole-version.sh to reduce the amount of duplication across the tree. Create CONFIG_PAHOLE_VERSION so the version code can be used in Kconfig to enable and disable configuration options based on the pahole version, which is already done in a couple of places. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-3-nathan@kernel.org
2022-02-02MAINTAINERS: Add scripts/pahole-flags.sh to BPF sectionNathan Chancellor
Currently, scripts/pahole-flags.sh has no formal maintainer. Add it to the BPF section so that patches to it can be properly reviewed and picked up. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220201205624.652313-2-nathan@kernel.org
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net/mlx5e: Avoid field-overflowing memcpy()Kees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Use struct_group() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct vlan_ethhdr around members h_dest and h_source, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of h_dest. "pahole" shows no size nor member offset changes to struct vlan_ethhdr. "objdump -d" shows no object code changes. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan
Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem
IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem
IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-13 01:25:53 +0000