summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-29mac80211: remove unnecessary NULL checkJohannes Berg
We don't need to check if he_oper is NULL before calling ieee80211_verify_sta_he_mcs_support() as it - now - will correctly check this itself. Remove the redundant check. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29mac80211: fix potential null pointer dereferenceGustavo A. R. Silva
he_op is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after he_op has been properly null checked. Notice that, currently, he_op is already being null checked before calling this function at 4593: 4593 if (!he_oper || 4594 !ieee80211_verify_sta_he_mcs_support(sband, he_oper)) 4595 ifmgd->flags |= IEEE80211_STA_DISABLE_HE; but in case ieee80211_verify_sta_he_mcs_support is ever called without verifying he_oper is not null, we will end up having a null pointer dereference. So, we better don't take any chances. Addresses-Coverity-ID: 1470068 ("Dereference before null check") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29cfg80211: track time using boottimeArnd Bergmann
The cfg80211 layer uses get_seconds() to read the current time in its supend handling. This function is deprecated because of the 32-bit time_t overflow, and it can cause unexpected behavior when the time changes due to settimeofday() calls or leap second updates. In many cases, we want to use monotonic time instead, however cfg80211 explicitly tracks the time spent in suspend, so this changes the driver over to use ktime_get_boottime_seconds(), which is slightly slower, but not used in a fastpath here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29nl80211: check nla_parse_nested() return valuesJohannes Berg
At the very least we should check the return value if nla_parse_nested() is called with a non-NULL policy. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29nl80211: relax ht operation checks for meshBob Copeland
Commit 9757235f451c, "nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT operation field in meshconf, while also adding checks requiring the non-greenfield and non-ht-sta bits to be set in certain circumstances. The latter bit is actually reserved for mesh BSSes according to Table 9-168 in 802.11-2016, so in fact it should not be set. wpa_supplicant sets these bits because the mesh and AP code share the same implementation, but authsae does not. As a result, some meshconf updates from authsae which set only the NONHT_MIXED protection bits were being rejected. In order to avoid breaking userspace by changing the rules again, simply accept the values with or without the bits set, and mask off the reserved bit to match the spec. While in here, update the 802.11-2012 reference to 802.11-2016. Fixes: 9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Cc: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Bob Copeland <bobcopeland@fb.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Reviewed-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29mac80211: disable BHs/preemption in ieee80211_tx_control_port()Denis Kenzior
On pre-emption enabled kernels the following print was being seen due to missing local_bh_disable/local_bh_enable calls. mac80211 assumes that pre-emption is disabled in the data path. BUG: using smp_processor_id() in preemptible [00000000] code: iwd/517 caller is __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] [...] Call Trace: dump_stack+0x5c/0x80 check_preemption_disabled.cold.0+0x46/0x51 __ieee80211_subif_start_xmit+0x144/0x210 [mac80211] Fixes: 911806491425 ("mac80211: Add support for tx_control_port") Signed-off-by: Denis Kenzior <denkenz@gmail.com> [commit message rewrite, fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-29i2c: gpio: initialize SCL to HIGH againWolfram Sang
It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfersPeter Rosin
If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: algos: bit: mention our experience about initial statesWolfram Sang
So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-06-29Revert "i2c: algo-bit: init the bus to a known state"Wolfram Sang
This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru> Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29Merge branch 'ila-Cleanup'David S. Miller
Tom Herbert says: ==================== ila: Cleanup Perform some cleanup in ILA code. This includes: - Fix rhashtable walk for cases where nl dumps are done with muliple function calls. Add a skip index to skip over entries in a node that have been previously visitied. Call rhashtable_walk_peek to avoid dropping items between calls to ila_nl_dump. - Call alloc_bucket_spinlocks to create bucket locks. - Split out module initialization and netlink definitions into separate files. - Add ILA_CMD_FLUSH netlink command to clear the ILA translation table. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29ila: Flush netlink command to clear xlat tableTom Herbert
Add ILA_CMD_FLUSH netlink command to clear the ILA translation table. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29ila: Create main ila source fileTom Herbert
Create a main ila file that contains the module initialization functions as well as netlink definitions. Previously these were defined in ila_xlat and ila_common. This approach allows better extensibility. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29ila: Call library function alloc_bucket_locksTom Herbert
To allocate the array of bucket locks for the hash table we now call library function alloc_bucket_spinlocks. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29ila: Fix use of rhashtable walk in ila_xlat.cTom Herbert
Perform better EAGAIN handling, handle case where ila_dump_info fails and we missed objects in the dump, and add a skip index to skip over ila entires in a list on a rhashtable node that have already been visited (by a previous call to ila_nl_dump). Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29Merge branch 'hns3-a-few-code-improvements'David S. Miller
Peng Li says: ==================== net: hns3: a few code improvements This patchset fixes a few code stylistic issues from concentrated review, no functional changes introduced. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: use lower_32_bits and upper_32_bitsHuazhong Tan
MACRO lower_32_bits and upper_32_bits can help to get bits 0-31 and bits 32-63 of a number, so just use it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: remove back in struct hclge_hwHuazhong Tan
hclge_hw is embedded in hclge_dev, so use container_of instead of back to get hclge_dev. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: remove the Redundant put_vector in hns3_client_uninitPeng Li
The interface h->ae_algo->ops->put_vector is called in both hns3_nic_dealloc_vector_data and hns3_nic_uninit_vector_data in hns3_client_uninit, this will cause vector freed twice. This patch remove the Redundant put_vector to make vector freed only once. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: print the ret value in error informationPeng Li
Print the ret value in error information can help find the reason. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: extraction an interface for state init|uninitPeng Li
Extraction an interface for state init|uninit to make the code easier to read. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: remove unused head file in hnae3.cPeng Li
linux/slab.h is not used in hnae3.h, this patch removes it. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: add unlikely for error checkPeng Li
The first bd of a packet is invalid and invalid ring head for tx IRQ is not offen, they may occur when there is error, Add unlikely for error check branch is better for performance. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: add l4_type check for both ipv4 and ipv6Peng Li
HW supports UDP, TCP and SCTP packets checksum for both ipv4 and ipv6, but do not support other type packets checksum for ipv4 or ipv6. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: add vector status check before free vectorPeng Li
If the hdev->vector_status[vector_id] is already HCLGE_INVALID_VPORT, should log the error and return. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: rename the interface for init_client_instance and ↵Peng Li
uninit_client_instance The interface init_client_instance and uninit_client_instance do not register anything, only initialize the client instance. This patch rename the related interface to make the function name to indicate the purpose. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-29net: hns3: remove hclge_get_vector_index from hclge_bind_ring_with_vectorPeng Li
In hclge_unmap_ring_frm_vector, there are 2 steps: step 1: get vector index. step 2 unbind ring with vector. But it gets vector id again in step 2 interface. This patch removes hclge_get_vector_index from hclge_bind_ring_with_vector, and make the step the same with hns3 PF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28selinux: move user accesses in selinuxfs out of locked regionsJann Horn
If a user is accessing a file in selinuxfs with a pointer to a userspace buffer that is backed by e.g. a userfaultfd, the userspace access can stall indefinitely, which can block fsi->mutex if it is held. For sel_read_policy(), remove the locking, since this method doesn't seem to access anything that requires locking. For sel_read_bool(), move the user access below the locked region. For sel_write_bool() and sel_commit_bools_write(), move the user access up above the locked region. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: removed an unused variable in sel_read_policy()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-06-29bpf: Change bpf_fib_lookup to return lookup statusDavid Ahern
For ACLs implemented using either FIB rules or FIB entries, the BPF program needs the FIB lookup status to be able to drop the packet. Since the bpf_fib_lookup API has not reached a released kernel yet, change the return code to contain an encoding of the FIB lookup result and return the nexthop device index in the params struct. In addition, inform the BPF program of any post FIB lookup reason as to why the packet needs to go up the stack. The fib result for unicast routes must have an egress device, so remove the check that it is non-NULL. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28test_bpf: flag tests that cannot be jited on s390Kleber Sacilotto de Souza
Flag with FLAG_EXPECTED_FAIL the BPF_MAXINSNS tests that cannot be jited on s390 because they exceed BPF_SIZE_MAX and fail when CONFIG_BPF_JIT_ALWAYS_ON is set. Also set .expected_errcode to -ENOTSUPP so the tests pass in that case. Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28samples/bpf: xdp_rxq_info action XDP_TX must adjust MAC-addrsJesper Dangaard Brouer
XDP_TX requires also changing the MAC-addrs, else some hardware may drop the TX packet before reaching the wire. This was observed with driver mlx5. If xdp_rxq_info select --action XDP_TX the swapmac functionality is activated. It is also possible to manually enable via cmdline option --swapmac. This is practical if wanting to measure the overhead of writing/updating payload for other action types. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28samples/bpf: extend xdp_rxq_info to read packet payloadJesper Dangaard Brouer
There is a cost associated with reading the packet data payload that this test ignored. Add option --read to allow enabling reading part of the payload. This sample/tool helps us analyse an issue observed with a NIC mlx5 (ConnectX-5 Ex) and an Intel(R) Xeon(R) CPU E5-1650 v4. With no_touch of data: Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:no_touch XDP stats CPU pps issue-pps XDP-RX CPU 0 14,465,157 0 XDP-RX CPU 1 14,464,728 0 XDP-RX CPU 2 14,465,283 0 XDP-RX CPU 3 14,465,282 0 XDP-RX CPU 4 14,464,159 0 XDP-RX CPU 5 14,465,379 0 XDP-RX CPU total 86,789,992 When not touching data, we observe that the CPUs have idle cycles. When reading data the CPUs are 100% busy in softirq. With reading data: Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:read XDP stats CPU pps issue-pps XDP-RX CPU 0 9,620,639 0 XDP-RX CPU 1 9,489,843 0 XDP-RX CPU 2 9,407,854 0 XDP-RX CPU 3 9,422,289 0 XDP-RX CPU 4 9,321,959 0 XDP-RX CPU 5 9,395,242 0 XDP-RX CPU total 56,657,828 The effect seen above is a result of cache-misses occuring when more RXQs are being used. Based on perf-event observations, our conclusion is that the CPUs DDIO (Direct Data I/O) choose to deliver packet into main memory, instead of L3-cache. We also found, that this can be mitigated by either using less RXQs or by reducing NICs the RX-ring size. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28net/mlx5e: Update NIC HW stats on demand onlySaeed Mahameed
Disable periodic stats update background thread and update stats in background on demand when ndo_get_stats is called. Having a background thread running in the driver all the time is bad for power consumption and normally a user space daemon will query the stats once every specific interval, so ideally the background thread and its interval can be done in user space.. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
2018-06-28net/mlx5e: Add counter for total num of NOP operationsTariq Toukan
A per-ring counter for NOP operations already exists. Here I add a counter that sums them up. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add counter for MPWQE filler stridesTariq Toukan
Add ethtool counter to indicate the number of strides consumed by filler CQEs. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add channel events counterTariq Toukan
Add per-channel and global ethtool counters for channel events. Each event indicates an interrupt on one of the channel's completion queues. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add a counter for congested UMRsTariq Toukan
Add per-ring and global ethtool counters for congested UMR requests. These events indicate congestion in UMR handlers in HW. Such event is concluded when there's an outstanding UMR post, yet the SW consumed at least two additional MPWQEs in the meanwhile. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add NAPI statisticsTariq Toukan
Add per-channel and global ethtool counters for NAPI. This helps us monitor and analyze performance in general. - ch[i]_poll: the number of times the channel's NAPI poll was invoked. - ch[i]_arm: the number of times the channel's NAPI poll completed and armed the completion queues. - ch[i]_aff_change: the number of times the channel's NAPI poll explicitly stopped execution on a cpu due to a change in affinity. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add XDP_TX completions statisticsTariq Toukan
Add per-ring and global ethtool counters for XDP_TX completions. This helps us monitor and analyze XDP_TX flow performance. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add TX completions statisticsTariq Toukan
Add per-ring and global ethtool counters for TX completions. This helps us monitor and analyze TX flow performance. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: RX, Use existing WQ local variableTariq Toukan
Local variable 'wq' already points to &sq->wq, use it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Convert large order kzalloc allocations to kvzallocTariq Toukan
Replace calls to kzalloc_node with kvzalloc_node, as it fallsback to lower-order pages if the higher-order trials fail. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add UDP GSO remaining counterBoris Pismenny
This patch adds a counter for tx UDP GSO packets that contain a segment that is not aligned to MSS - remaining segment. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add UDP GSO supportBoris Pismenny
This patch enables UDP GSO support. We enable this by using two WQEs the first is a UDP LSO WQE for all segments with equal length, and the second is for the last segment in case it has different length. Due to HW limitation, before sending, we must adjust the packet length fields. We measure performance between two Intel(R) Xeon(R) CPU E5-2643 v2 @3.50GHz machines connected back-to-back with Connectx4-Lx (40Gbps) NICs. We compare single stream UDP, UDP GSO and UDP GSO with offload. Performance: | MSS (bytes) | Throughput (Gbps) | CPU utilization (%) UDP GSO offload | 1472 | 35.6 | 8% UDP GSO | 1472 | 25.5 | 17% UDP | 1472 | 10.2 | 17% UDP GSO offload | 1024 | 35.6 | 8% UDP GSO | 1024 | 19.2 | 17% UDP | 1024 | 5.7 | 17% UDP GSO offload | 512 | 33.8 | 16% UDP GSO | 512 | 10.4 | 17% UDP | 512 | 3.5 | 17% Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28parisc: Reduce debug output in unwind codeHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-29Merge tag 'drm-misc-fixes-2018-06-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v4.18-rc3: - A single fix in meson for an unhandled error path in meson_drv_bind_master(). Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/fa740f31-5a8d-ed45-5e8a-aecd3f6f11b7@linux.intel.com
2018-06-29Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few fixes for 4.18: - fix a read past the end of an array due to vega20 changes - fix driver on systems with non-4K pages - fix locking with pageflipping in DC that could lead to a sleep while atomic - fix VCN firmware version reporting for upcoming firmware Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628032641.2765-1-alexander.deucher@amd.com
2018-06-28dm: prevent DAX mounts if not supportedRoss Zwisler
Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-28dax: check for QUEUE_FLAG_DAX in bdev_dax_supported()Ross Zwisler
Add an explicit check for QUEUE_FLAG_DAX to __bdev_dax_supported(). This is needed for DM configurations where the first element in the dm-linear or dm-stripe target supports DAX, but other elements do not. Without this check __bdev_dax_supported() will pass for such devices, letting a filesystem on that device mount with the DAX option. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Mike Snitzer <snitzer@redhat.com> Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-28pmem: only set QUEUE_FLAG_DAX for fsdax modeRoss Zwisler
QUEUE_FLAG_DAX is an indication that a given block device supports filesystem DAX and should not be set for PMEM namespaces which are in "raw" mode. These namespaces lack struct page and are prevented from participating in filesystem DAX as of commit 569d0365f571 ("dax: require 'struct page' by default for filesystem dax"). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Mike Snitzer <snitzer@redhat.com> Fixes: 569d0365f571 ("dax: require 'struct page' by default for filesystem dax") Cc: stable@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-10-01 15:00:11 +0000