summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-30netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorderwenxu
Get the vlan_proto of ingress bridge in network byteorder as userspace expects. Otherwise this is inconsistent with NFT_META_PROTOCOL. Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-29Merge branch 'r8169-add-support-for-RTL8125'David S. Miller
Heiner Kallweit says: ==================== r8169: add support for RTL8125 This series adds support for the 2.5Gbps chip RTl8125. It can be found on PCIe network cards, and on an increasing number of consumer gaming mainboards. Series is partially based on the r8125 vendor driver. Tested with a Delock 89531 PCIe card against a Netgear GS110MX Multi-Gig switch. Firmware isn't strictly needed, but on some systems there may be compatibility issues w/o firmware. Firmware has been submitted to linux-firmware. v2: - split first patch into 6 smaller ones to facilitate bisecting ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: add support for EEE on RTL8125Heiner Kallweit
This adds EEE support for RTL8125 based on the vendor driver. Supported is EEE for 100Mbps and 1Gbps. Realtek recommended to not yet enable EEE for 2.5Gbps due to potential compatibility issues. Also ethtool doesn't support yet controlling EEE for 2.5Gbps and 5Gbps. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: add RTL8125 PHY initializationHeiner Kallweit
This patch adds PHY initialization magic copied from the r8125 vendor driver. In addition it supports loading the firmware for chip version RTL_GIGA_MAC_VER_61. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: add support for RTL8125Heiner Kallweit
This adds support for 2.5Gbps chip RTL8125, it's partially based on the r8125 vendor driver. Tested with a Delock 89531 PCIe card against a Netgear GS110MX Multi-Gig switch. Firmware isn't strictly needed, but on some systems there may be compatibility issues w/o firmware. Firmware has been submitted to linux-firmware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: don't use bit LastFrag in tx descriptor after sendHeiner Kallweit
On RTL8125 this bit is always cleared after send. Therefore check for tx_skb->skb being set what is functionally equivalent. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: read common register for PCI commitHeiner Kallweit
RTL8125 uses a different register number for IntrMask. To net have side effects by reading a random register let's use a register that is the same on all supported chip families. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: move disabling interrupt coalescing to RTL8169/RTL8168 initHeiner Kallweit
RTL8125 doesn't support the same coalescing registers, therefore move this initialization to the 8168/6169-specific init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: factor out reading MAC address from registersHeiner Kallweit
For RTL8125 we will have to read the MAC address also from another register range, therefore create a small helper. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: restrict rtl_is_8168evl_up to RTL8168 chip versionsHeiner Kallweit
Extend helper rtl_is_8168evl_up to properly work once we add mac version numbers >51 for RTL8125. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29r8169: change interrupt mask type to u32Heiner Kallweit
RTL8125 uses a 32 bit interrupt mask even though only bits in the lower 16 bits are used. Change interrupt mask size to u32 to be prepared and reintroduce helper rtl_get_events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30Merge tag 'drm-misc-fixes-2019-08-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.3 (rc7?): - Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode. - Fix omap port lookup for SDI output - Use virtio_max_dma_size to fix an issue with swiotlb. - Compiler fixes to komeda. - Add missing of_node_get() call in komeda. - Reorder the komeda de-init functions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f187c28b-6279-2c4f-3e53-296ee899133b@linux.intel.com
2019-08-29Merge tag 'mlx5-updates-2019-08-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-08-22 Misc updates for mlx5e net device driver 1) Maxim and Tariq add the support for LAG TX port affinity distribution When VF LAG is enabled, VFs netdevs will round-robin the TX affinity of their tx queues among the different LAG ports. 2) Aya adds the support for ip-in-ip RSS. 3) Marina adds the support for ip-in-ip TX TSO and checksum offloads. 4) Moshe adds a device internal drop counter to mlx5 ethtool stats. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: dsa: mv88e6xxx: fix freeing unused SERDES IRQVivien Didelot
Now mv88e6xxx does not enable its ports at setup itself and let the DSA core handle this, unused ports are disabled without being powered on first. While that is expected, the SERDES powering code was assuming that a port was already set up before powering it down, resulting in freeing an unused IRQ. The patch fixes this assumption. Fixes: b759f528ca3d ("net: dsa: mv88e6xxx: enable SERDES after setup") Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: dsa: mv88e6xxx: keep CMODE writable code privateVivien Didelot
This is a follow-up patch for commit 7a3007d22e8d ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family"). Since .port_set_cmode is only called from mv88e6xxx_port_setup_mac and mv88e6xxx_phylink_mac_config, it is fine to keep this "make writable" code private to the mv88e6341_port_set_cmode implementation, instead of adding yet another operation to the switch info structure. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: dsa: mv88e6xxx: get serdes lane after lockVivien Didelot
This is a follow-up patch for commit 17deaf5cb37a ("net: dsa: mv88e6xxx: create serdes_get_lane chip operation"). The .serdes_get_lane implementations access the CMODE of a port, even though it is cached at the moment, it is safer to call them after the mutex is locked, not before. At the same time, check for an eventual error and return IRQ_DONE, instead of blindly ignoring it. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29Merge branch 'net-hns3-add-some-cleanups-and-optimizations'David S. Miller
Huazhong Tan says: ==================== net: hns3: add some cleanups and optimizations This patch-set includes cleanups, optimizations and bugfix for the HNS3 ethernet controller driver. [patch 01/12] adds code optimization for debugfs command "dump reg". [patch 02/12] fixes magic number issues. [patch 03/12] modifies some parameters about hclge_dbg_dump_tm_map(). [patch 04/12] removes some unused parameters. [patch 05/12] refactors some logs to make them more readable. [patch 06/12] makes some resusable codes into functions. [patch 07/12] fixes some type errors. [patch 08/12] reduces the waiting time for per TQP reset. [patch 09/12] implements .process_hw_error for hns3 client. [patch 10/12] adds phy selftest for HNS3 driver. [patch 11/12] adds checking for reset interrupt status when reset fails. [patch 12/12] prevents SSU loopback when running ethtool -t. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: not allow SSU loopback while execute ethtool -t devYufeng Mo
The current loopback mode is to add 0x1F to the SMAC address as the DMAC address and enable the promiscuous mode. However, if the VF address is the same as the DMAC address, the loopback test fails. Loopback can be enabled in three places: SSU, MAC, and serdes. By default, SSU loopback is enabled, so if the SMAC and the DMAC are the same, the packets are looped back in the SSU. If SSU loopback is disabled, packets can reach MAC even if SMAC is the same as DMAC. Therefore, this patch disables the SSU loopback before the loopback test. In this way, the SMAC and DMAC can be the same, and the promiscuous mode does not need to be enabled. And this is not valid in version 0x20. This patch also uses a macro to replace 0x1F. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: check reset interrupt status when reset failsHuazhong Tan
Currently, the reset interrupt will be cleared firstly, so when reset fails, if interrupt status register has reset interrupt, it means there is a new coming reset. Fixes: 72e2fb07997c ("net: hns3: clear reset interrupt status in hclge_irq_handle()") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: add phy selftest functionYufeng Mo
Currently, the loopback test supports only mac selftest and serdes selftest. This patch adds phy selftest. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: implement .process_hw_error for hns3 clientWeihang Li
When hardware or IMP get specified error it may need the client to take some special operations. This patch implements the hns3 client's process_hw_errorx. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: optimize waiting time for TQP resetZhongzhu Liu
This patch optimizes the waiting time for TQP reset. Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: fix incorrect type in assignment.Guojia Liao
This patch fixes some incorrect type in assignment reported by sparse. Those sparse warning as below: - warning : restricted __le16 degrades to integer - warning : cast from restricted __le32 - warning : expected restricted __le32 - warning : cast from restricted __be32 - warning : cast from restricted __be16 - warning : cast to restricted __le16 Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: make some reusable codes into a functionYonglong Liu
In hclge_dcb.c, these pair of codes: hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); and hclge_notify_client(hdev, HNAE3_INIT_CLIENT); hclge_notify_client(hdev, HNAE3_UP_CLIENT); are called many times, so make them into a function. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: optimize some log printingsYufeng Mo
To better identify abnormal conditions, this patch modifies or adds some logs to show driver status more accurately. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: reduce the parameters of some functionsGuojia Liao
This patch simplifies parameters of some functions by deleting unused parameter. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: modify base parameter of kstrtouint in hclge_dbg_dump_tm_mapHuazhong Tan
This patch replaces kstrtouint()'s patameter base with 0 in the hclge_dbg_dump_tm_mac(), which makes it more flexible. Also uses a macro to replace string "dump tm map", since it has been used multiple times. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: use macro instead of magic numberHuazhong Tan
This patch uses macro to replace some magic number. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29net: hns3: code optimization for debugfs related to "dump reg"Zhongzhu Liu
For making the code more readable, this patch uses a array to keep the information about the dumping register, and then uses it to parse the parameter cmd_buf which passing into hclge_dbg_dump_reg_cmd(). Also replaces parameter "base" of kstrtouint with 0 in the hclge_dbg_dump_reg_common(), which makes it more flexible. Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Add pause frame supportIoana Radulescu
Starting with firmware version MC10.18.0, we have support for L2 flow control. Asymmetrical configuration (Rx or Tx only) is supported, but not pause frame autonegotioation. Pause frame configuration is done via ethtool. By default, we start with flow control enabled on both Rx and Tx. Changes are propagated to hardware through firmware commands, using two flags (PAUSE, ASYM_PAUSE) to specify Rx and Tx pause configuration, as follows: PAUSE | ASYM_PAUSE | Rx pause | Tx pause ---------------------------------------- 0 | 0 | disabled | disabled 0 | 1 | disabled | enabled 1 | 0 | enabled | enabled 1 | 1 | enabled | disabled The hardware can automatically send pause frames when the number of buffers in the pool goes below a predefined threshold. Due to this, flow control is incompatible with Rx frame queue taildrop (both mechanisms target the case when processing of ingress frames can't keep up with the Rx rate; for large frames, the number of buffers in the pool may never get low enough to trigger pause frames as long as taildrop is enabled). So we set pause frame generation and Rx FQ taildrop as mutually exclusive. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Use stored link settingsIoana Radulescu
Whenever a link state change occurs, we get notified and save the new link settings in the device's private data. In ethtool get_link_ksettings, use the stored state instead of interrogating the firmware each time. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29dpaa2-eth: Remove support for changing link settingsIoana Radulescu
We only support fixed-link for now, so there is no point in offering users the option to change link settings via ethtool. Functionally there is no change, since firmware prevents us from changing link parameters anyway. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29Merge tag 'mac80211-for-davem-2019-08-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have * one fix for a driver as I'm covering for Kalle while he's on vacation * two fixes for eapol-over-nl80211 work ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29i2c: piix4: Fix port selection for AMD Family 16h Model 30hAndrew Cooks
Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips") commit 6befa3fde65f ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here. The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides: 50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different: 51192 - Bolton Register Reference Guide We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID: Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A. The following additional public AMD BKDG documents were checked and do not share the same port selection register: 42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any 48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel textThomas Gleixner
ftrace does not use text_poke() for enabling trace functionality. It uses its own mechanism and flips the whole kernel text to RW and back to RO. The CPA rework removed a loop based check of 4k pages which tried to preserve a large page by checking each 4k page whether the change would actually cover all pages in the large page. This resulted in endless loops for nothing as in testing it turned out that it actually never preserved anything. Of course testing missed to include ftrace, which is the one and only case which benefitted from the 4k loop. As a consequence enabling function tracing or ftrace based kprobes results in a full 4k split of the kernel text, which affects iTLB performance. The kernel RO protection is the only valid case where this can actually preserve large pages. All other static protections (RO data, data NX, PCI, BIOS) are truly static. So a conflict with those protections which results in a split should only ever happen when a change of memory next to a protected region is attempted. But these conflicts are rightfully splitting the large page to preserve the protected regions. In fact a change to the protected regions itself is a bug and is warned about. Add an exception for the static protection check for kernel text RO when the to be changed region spawns a full large page which allows to preserve the large mappings. This also prevents the syslog to be spammed about CPA violations when ftrace is used. The exception needs to be removed once ftrace switched over to text_poke() which avoids the whole issue. Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely") Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de
2019-08-29i2c: designware: Synchronize IRQs when unregistering slave clientJarkko Nikula
Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29i2c: i801: Avoid memory leak in check_acpi_smo88xx_device()Andy Shevchenko
check_acpi_smo88xx_device() utilizes acpi_get_object_info() which in its turn allocates a buffer. User is responsible to clean allocated resources. The last has been missed in the original code. Fix it here. While here, replace !ACPI_SUCCESS() with ACPI_FAILURE(). Fixes: 19b07cb4a187 ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29i2c: make i2c_unregister_device() ERR_PTR safeWolfram Sang
We are moving towards returning ERR_PTRs when i2c_new_*_device() calls fail. Make sure its counterpart for unregistering handles ERR_PTRs as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29Merge tag 'Wimplicit-fallthrough-5.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arc and nds32 for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: nds32: Mark expected switch fall-throughs ARC: unwind: Mark expected switch fall-through
2019-08-29Merge tag 'mtd/fixes-for-5.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Miquel Raynal: "Add a 'depends on' in the core Hyperbus Kconfig entry to avoid build errors" * tag 'mtd/fixes-for-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: fix dependency and build error
2019-08-29nds32: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: allmodconfig nds32): include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:362:20: warning: this statement may fall through [-Wimplicit-fallthrough=] arch/nds32/kernel/signal.c:315:7: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/soft-fp.h:124:8: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:417:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:430:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:310:11: warning: this statement may fall through [-Wimplicit-fallthrough=] include/math-emu/op-common.h:320:11: warning: this statement may fall through [-Wimplicit-fallthrough=] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-29ARC: unwind: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: haps_hs_defconfig arc): arch/arc/kernel/unwind.c: In function ‘read_pointer’: ./include/linux/compiler.h:328:5: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/compiler.h:338:2: note: in expansion of macro ‘__compiletime_assert’ __compiletime_assert(condition, msg, prefix, suffix) ^~~~~~~~~~~~~~~~~~~~ ./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’ _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^~~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^~~~~~~~~~~~~~~~~~ ./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~ arch/arc/kernel/unwind.c:573:3: note: in expansion of macro ‘BUILD_BUG_ON’ BUILD_BUG_ON(sizeof(u32) != sizeof(value)); ^~~~~~~~~~~~ arch/arc/kernel/unwind.c:575:2: note: here case DW_EH_PE_native: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-29soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TESTGeert Uytterhoeven
The move of the IXP4xx SoC drivers exposed their config options on all platforms. Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block. Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org Fixes: fcf2d8978cd538a5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29Merge tag 'sunxi-fixes-for-5.3-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A single patch to change my MAINTAINERS address * tag 'sunxi-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: MAINTAINERS: Update my email address Link: https://lore.kernel.org/r/8c04a96b-4a75-4e1f-b3ac-05fe091f251e.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into ↵Arnd Bergmann
arm/fixes Hisilicon fixes for v5.3-rc - Fixed RCU usage in logical PIO - Added a function to unregister a logical PIO range in logical PIO to support the fixes in the hisi-lpc driver - Fixed and optimized hisi-lpc driver to avoid potential use-after-free and driver unbind crash * tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi: bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29mac80211: Correctly set noencrypt for PAE framesDenis Kenzior
The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29mac80211: Don't memset RXCB prior to PAE interceptDenis Kenzior
In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29iwlwifi: pcie: handle switching killer Qu B0 NICs to C0Luca Coelho
We need to use a different firmware for C0 versions of killer Qu NICs. Add structures for them and handle them in the if block that detects C0 revisions. Additionally, instead of having an inclusive check for QnJ devices, make the selection exclusive, so that switching to QnJ is the exception, not the default. This prevents us from having to add all the non-QnJ cards to an exclusion list. To do so, only go into the QnJ block if the device has an RF ID type HR and HW revision QnJ. Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-29netfilter: nf_flow_table: clear skb tstamp before xmitFlorian Westphal
If 'fq' qdisc is used and a program has requested timestamps, skb->tstamp needs to be cleared, else fq will treat these as 'transmit time'. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-29mtd: hyperbus: fix dependency and build errorRandy Dunlap
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on UML builds): WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=m] && HAS_IOMEM [=n] Selected by [m]: - MTD_HYPERBUS [=m] && MTD [=m] ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined! Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mtd@lists.infradead.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit (git 2.34.1) at 2025-09-19 20:00:34 +0000