| Age | Commit message (Collapse) | Author |
|---|
|
Macronix SPI-NANDs encode the ECC status into two bits. There are three
standard situations (no bitflip, bitflips, error), and an additional
possible situation which is only triggered when configuring the 0x10
configuration register, allowing to know, if there have been bitflips,
whether the maximum amount of bitflips was above a configurable
threshold or not. In all cases, for now, s this configuration register
is unset, it means the same as "there are bitflips".
This value is maybe standard, maybe not. For now, let's define it in the
Macronix driver, we can safely move it to a shared place later if that
is relevant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-9-miquel.raynal@bootlin.com
|
|
With GET_STATUS commands, SPI-NAND devices can tell the status of the
last read operation, in particular if there was:
- no bitflips
- corrected bitflips
- uncorrectable bitflips
The next step then to read an ECC status register and retrieve the
amount of bitflips, when relevant, if possible. The logic used here
works well for now, but will no longer apply to continuous reads. In
order to prepare the introduction of continuous reads, let's factorize
out the code that is specific to single-page reads.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-8-miquel.raynal@bootlin.com
|
|
Use "macronix_" instead of "mx35lf1ge4ab_" as common prefix for the
->get_status() callback name. This callback is used by many different
families, there is no variation in the implementation so far.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-7-miquel.raynal@bootlin.com
|
|
This helper function will soon be used from a vendor driver, let's
export it through the spinand.h header. No need for any export, as there
is currently no reason for any module to need it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-6-miquel.raynal@bootlin.com
|
|
A regular page read consist in:
- Asking one page of content from the NAND array to be loaded in the
chip's SRAM,
- Waiting for the operation to be done,
- Retrieving the data (I/O phase) from the chip's SRAM.
When reading several sequential pages, the above operation is repeated
over and over. There is however a way to optimize these accesses, by
enabling continuous reads. The feature requires the NAND chip to have a
second internal SRAM area plus a bit of additional internal logic to
trigger another internal transfer between the NAND array and the second
SRAM area while the I/O phase is ongoing. Once the first I/O phase is
done, the host can continue reading more data, continuously, as the chip
will automatically switch to the second SRAM content (which has already
been loaded) and in turns trigger the next load into the first SRAM area
again.
From an instruction perspective, the command op-codes are different, but
the same cycles are required. The only difference is that after a
continuous read (which is stopped by a CS deassert), the host must
observe a delay of tRST. However, because there is no guarantee in Linux
regarding the actual state of the CS pin after a transfer (in order to
speed-up the next transfer if targeting the same device), it was
necessary to manually end the continuous read with a configuration
register write operation.
Continuous reads have two main drawbacks:
* They only work on full pages (column address ignored)
* Only the main data area is pulled, out-of-band bytes are not
accessible. Said otherwise, the feature can only be useful with on-die
ECC engines.
Performance wise, measures have been performed on a Zynq platform using
Macronix SPI-NAND controller with a Macronix chip (based on the
flash_speed tool modified for testing sequential reads):
- 1-1-1 mode: performances improved from +3% (2-pages) up to +10% after
a dozen pages.
- 1-1-4 mode: performances improved from +15% (2-pages) up to +40% after
a dozen pages.
This series is based on a previous work from Macronix engineer Jaime
Liao.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-5-miquel.raynal@bootlin.com
|
|
There is currently only a single path for performing page reads as
requested by the MTD layer. Soon there will be two:
- a "regular" page read
- a continuous page read
Let's extract the page read logic in a dedicated helper, so the
introduction of continuous page reads will be as easy as checking whether
continuous reads shall/can be used and calling one helper or the other.
There is not behavioral change intended.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-4-miquel.raynal@bootlin.com
|
|
In order to be able to iterate easily across eraseblocks rather than
pages, let's introduce a block iterator inspired from the page iterator.
The main usage of this iterator will be for continuous/sequential reads,
where it is interesting to use a single request rather than split the
requests in smaller chunks (ie. pages) that can be hardly optimized.
So a "continuous" boolean get's added for this purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-3-miquel.raynal@bootlin.com
|
|
Soon a helper for iterating over blocks will be needed (for continuous
read purposes). In order to clarify the intend of this helper, let's
rename it with the "page" wording inside.
While at it, improve the doc and fix a typo.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826101412.20644-2-miquel.raynal@bootlin.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-11-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-10-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-9-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-8-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-7-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-6-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-5-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_child_of_node_scoped().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-4-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_child_of_node_scoped().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-3-ruanjinjie@huawei.com
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-2-ruanjinjie@huawei.com
|
|
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826080408.2522978-1-ruanjinjie@huawei.com
|
|
The pci_release_regions was miss at error case, just add it.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826024339.476921-1-chenridong@huawei.com
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: ying zuxin <11154159@vivo.com>
Link: https://patch.msgid.link/20240906084841.19248-1-yingzuxin@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The zram_table_entry::flags member is of type long and uses 8 bytes on a
64bit architecture. With a PAGE_SIZE of 256KiB we have PAGE_SHIFT of 18
which in turn leads to __NR_ZRAM_PAGEFLAGS = 27. This still fits in an
ordinary integer.
By reducing the size of `flags' to four bytes, the size of the struct
goes back to 16 bytes. The padding between the lock and ac_time (if
enabled) is also gone.
Make zram_table_entry::flags an unsigned int and update the build test
to reflect the change.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20240906141520.730009-4-bigeasy@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ZRAM_LOCK was used for locking and after the addition of spinlock_t
the bit set and cleared but there no reader of it.
Remove the ZRAM_LOCK bit.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20240906141520.730009-3-bigeasy@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bit spinlock disables preemption. The spinlock_t lock becomes a sleeping
lock on PREEMPT_RT and it can not be acquired in this context. In this locked
section, zs_free() acquires a zs_pool::lock, and there is access to
zram::wb_limit_lock.
Add a spinlock_t for locking. Keep the set/ clear ZRAM_LOCK bit after
the lock has been acquired/ dropped. The size of struct zram_table_entry
increases by 4 bytes due to lock and additional 4 bytes padding with
CONFIG_ZRAM_TRACK_ENTRY_ACTIME enabled.
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20240906141520.730009-2-bigeasy@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A segmentation fault can be triggered when running
'perf mem record -e ldlat-loads'
The commit 35b38a71c92fa033 ("perf mem: Rework command option handling")
moves the OPT_CALLBACK of event from __cmd_record() to cmd_mem().
When invoking the __cmd_record(), the 'mem' has been referenced (&).
So the &mem passed into the parse_record_events() is a double reference
(&&) of the original struct perf_mem mem.
But in the cmd_mem(), the &mem is the single reference (&) of the
original struct perf_mem mem.
Fixes: 35b38a71c92fa033 ("perf mem: Rework command option handling")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240905170737.4070743-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The p-core mem events are missed when launching 'perf mem record' on ADL
and RPL.
root@number:~# perf mem record sleep 1
Memory events are enabled on a subset of CPUs: 16-27
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.032 MB perf.data ]
root@number:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
A variable 'record' in the 'struct perf_mem_event' is to indicate
whether a mem event in a mem_events[] should be recorded. The current
code only configure the variable for the first eligible PMU.
It's good enough for a non-hybrid machine or a hybrid machine which has
the same mem_events[].
However, if a different mem_events[] is used for different PMUs on a
hybrid machine, e.g., ADL or RPL, the 'record' for the second PMU never
get a chance to be set.
The mem_events[] of the second PMU are always ignored.
'perf mem' doesn't support the per-PMU configuration now. A per-PMU
mem_events[] 'record' variable doesn't make sense. Make it global.
That could also avoid searching for the per-PMU mem_events[] via
perf_pmu__mem_events_ptr every time.
Committer testing:
root@number:~# perf evlist -g
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
{cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}
cpu_core/mem-stores/P
dummy:u
root@number:~#
The :S for '{cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}' is
not being added by 'perf evlist -g', to be checked.
Fixes: abbdd79b786e036e ("perf mem: Clean up perf_mem_events__name()")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/lkml/Zthu81fA3kLC2CS2@x1/
Link: https://lore.kernel.org/r/20240905170737.4070743-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current perf_pmu__mem_events_init() only checks the availability of
the mem_events for the first eligible PMU. It works for non-hybrid
machines and hybrid machines that have the same mem_events.
However, it may bring issues if a hybrid machine has a different
mem_events on different PMU, e.g., Alder Lake and Raptor Lake. A
mem-loads-aux event is only required for the p-core. The mem_events on
both e-core and p-core should be checked and marked.
The issue was not found, because it's hidden by another bug, which only
records the mem-events for the e-core. The wrong check for the p-core
events didn't yell.
Fixes: abbdd79b786e036e ("perf mem: Clean up perf_mem_events__name()")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240905170737.4070743-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Running a script that processes PEBS records gives buffer overflows
in valgrind.
The problem is that the allocation of the register string doesn't
include the terminating 0 byte. Fix this.
I also replaced the very magic "28" with a more reasonable larger buffer
that should fit all registers. There's no need to conserve memory here.
==2106591== Memcheck, a memory error detector
==2106591== Copyright (C) 2002-2022, and GNU GPL'd, by Julian Seward et al.
==2106591== Using Valgrind-3.22.0 and LibVEX; rerun with -h for copyright info
==2106591== Command: ../perf script -i tcall.data gcov.py tcall.gcov
==2106591==
==2106591== Invalid write of size 1
==2106591== at 0x713354: regs_map (trace-event-python.c:748)
==2106591== by 0x7134EB: set_regs_in_dict (trace-event-python.c:784)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591== Address 0x7186fe0 is 0 bytes after a block of size 0 alloc'd
==2106591== at 0x484280F: malloc (vg_replace_malloc.c:442)
==2106591== by 0x7134AD: set_regs_in_dict (trace-event-python.c:780)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591==
==2106591== Invalid read of size 1
==2106591== at 0x484B6C6: strlen (vg_replace_strmem.c:502)
==2106591== by 0x555D494: PyUnicode_FromString (unicodeobject.c:1899)
==2106591== by 0x7134F7: set_regs_in_dict (trace-event-python.c:786)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== Address 0x7186fe0 is 0 bytes after a block of size 0 alloc'd
==2106591== at 0x484280F: malloc (vg_replace_malloc.c:442)
==2106591== by 0x7134AD: set_regs_in_dict (trace-event-python.c:780)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591==
==2106591== Invalid write of size 1
==2106591== at 0x713354: regs_map (trace-event-python.c:748)
==2106591== by 0x713539: set_regs_in_dict (trace-event-python.c:789)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591== Address 0x7186fe0 is 0 bytes after a block of size 0 alloc'd
==2106591== at 0x484280F: malloc (vg_replace_malloc.c:442)
==2106591== by 0x7134AD: set_regs_in_dict (trace-event-python.c:780)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591==
==2106591== Invalid read of size 1
==2106591== at 0x484B6C6: strlen (vg_replace_strmem.c:502)
==2106591== by 0x555D494: PyUnicode_FromString (unicodeobject.c:1899)
==2106591== by 0x713545: set_regs_in_dict (trace-event-python.c:791)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== Address 0x7186fe0 is 0 bytes after a block of size 0 alloc'd
==2106591== at 0x484280F: malloc (vg_replace_malloc.c:442)
==2106591== by 0x7134AD: set_regs_in_dict (trace-event-python.c:780)
==2106591== by 0x713E58: get_perf_sample_dict (trace-event-python.c:940)
==2106591== by 0x716327: python_process_general_event (trace-event-python.c:1499)
==2106591== by 0x7164E1: python_process_event (trace-event-python.c:1531)
==2106591== by 0x44F9AF: process_sample_event (builtin-script.c:2549)
==2106591== by 0x6294DC: evlist__deliver_sample (session.c:1534)
==2106591== by 0x6296D0: machines__deliver_event (session.c:1573)
==2106591== by 0x629C39: perf_session__deliver_event (session.c:1655)
==2106591== by 0x625830: ordered_events__deliver_event (session.c:193)
==2106591== by 0x630B23: do_flush (ordered-events.c:245)
==2106591== by 0x630E7A: __ordered_events__flush (ordered-events.c:324)
==2106591==
73056 total, 29 ignored
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240905151058.2127122-2-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Existing sys directories aren't placed under a model directory like
skylake.
Placing a sys directory there causes the `is_leaf_dir` test to fail and
consequently no events or metrics are generated for the model.
Ignore sys directories in this case and update the comments to
reflect why.
This change has no affect, but when testing with a sys directory for a
model people have reported running into the no event/metric issue.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240904211705.915101-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes from perf-tools/perf-tools, some of which were also in
perf-tools-next but were then indentified as being more appropriate to
go sooner, to fix regressions in v6.11.
Resolve a simple merge conflict in tools/perf/tests/pmu.c where a more
future proof approach to initialize all fields of a struct was used in
perf-tools-next, the one that is going into v6.11 is enough for the
segfault it addressed (using an uninitialized test_pmu.alias field).
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The version of the NBD protocol implemented by the kernel driver
currently has a 32 bit field for length values. As the NBD protocol uses
bytes as a unit of length, length values larger than 2^32 bytes cannot
be expressed.
Update the max_hw_discard_sectors field to match that.
Signed-off-by: Wouter Verhelst <w@uter.be>
Fixes: 268283244c0f ("nbd: use the atomic queue limits API in nbd_set_size")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Eric Blake <eblake@redhat.Com>
Link: https://lore.kernel.org/r/20240812133032.115134-8-w@uter.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Also handle NBD_FLAG_ROTATIONAL in our debug helper function
Signed-off-by: Wouter Verhelst <w@uter.be>
Cc: Eric Blake <eblake@redhat.Com>
Link: https://lore.kernel.org/r/20240812133032.115134-6-w@uter.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NBD protocol defines a message for zeroing out a region of an export
Add support to the kernel driver for that message.
Signed-off-by: Wouter Verhelst <w@uter.be>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240812133032.115134-3-w@uter.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids`
with the more readable `!cpumask_intersects(a, b)`.
[ tglx: Massaged change log ]
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/all/20240904134823.777623-2-costa.shul@redhat.com
|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
2372 600 0 2972 b9c drivers/vfio/mdev/mdev_sysfs.o
[After]
text data bss dec hex filename
2436 568 0 3004 bbc drivers/vfio/mdev/mdev_sysfs.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240904011837.2010444-1-lihongbo22@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
'struct kobj_type' is not modified. It is only used in kobject_init()
which takes a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with defconfig:
Before:
======
text data bss dec hex filename
7036 2136 56 9228 240c fs/orangefs/orangefs-sysfs.o
After:
======
text data bss dec hex filename
7484 1880 56 9420 24cc fs/orangefs/orangefs-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
rtd->initialized is used to know whether soc_init_pcm_runtime()
was correctly fined, and used to call snd_soc_link_exit().
We don't need to have it as bool, let's make it bit-field same as
other flags.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/87o752k7gq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
BFQ has been lacking active maintenance for approximately two years, and it
was recently transitioned to the Orphan state. However, there are still
many users, I have decided to step forward and assume the role of
maintainer to ensure continued support and development.
While I may not be the one with the most extensive knowledge of BFQ's
internals, I have been actively involved in its development since 2021.
Moreover, our team continues to rigorously test BFQ in downstream kernels,
ensuring it's stability and performance. Despite my confidence to maintain
BFQ, I believe it is prudent to classify its state as "Odd Fixes" to
accurately reflect my relatively new position as the maintainer.
By assuming this responsibility, I am committed to providing the necessary
support and addressing any issues that may arise with BFQ. As time
progresses, we will reassess the situation and determine the appropriate
state.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240906102153.612997-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since v5.12 the rbtree has gained some simplifying helpers aimed at making
rb tree users write less convoluted boiler plate code. Instead the caller
provides a single comparison function and the helpers generate the prior
open-coded stuff.
Update smmu->streams to use rb_find_add() and rb_find().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-9fef8cdc2ff6+150d1-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pmc_core_acpi_pm_timer_suspend_resume function
Change incorrect kernel-doc comment to regular comment for the
pmc_core_acpi_pm_timer_suspend_resume function.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409031410.a9beukFc-lkp@intel.com/
Link: https://lore.kernel.org/r/20240904094753.1615549-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use request_percpu_irq() instead of request_irq() to solve
the following sparse warning:
jcore-pit.c:173:40: warning: incorrect type in argument 5 (different address spaces)
jcore-pit.c:173:40: expected void *dev
jcore-pit.c:173:40: got struct jcore_pit [noderef] __percpu *static [assigned] [toplevel] jcore_pit_percpu
Compile tested only.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20240902104810.21080-1-ubizjak@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
ttc_setup_clockevent
Add the missing clk_disable_unprepare() before return in
ttc_setup_clockevent().
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240803064253.331946-3-cuigaosheng1@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
asm9260_timer_init
Add the missing clk_disable_unprepare() before return in
asm9260_timer_init().
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240803064253.331946-2-cuigaosheng1@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240820094603.103598-1-link@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Allow to disable ACPI PM Timer on suspend and enable on resume. A
disabled timer helps optimise power consumption when the system is
suspended. On resume the timer is only reactivated if it was activated
prior to suspend, so unless the ACPI PM timer is enabled in the BIOS,
this won't change anything.
The ACPI PM timer is used by Intel's iTCO/wdat_wdt watchdog to drive the
watchdog, so it doesn't need to run during suspend.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184208.1080710-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Provides the capability to register an external callback for the ACPI PM
timer, which is called during the suspend and resume processes.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184150.1079924-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
for_each_available_child_of_node_scoped()
for_each_available_child_of_node_scoped() can put the device_node
automatically. So, using it to make the code logic more simple and
remove the device_node clean up code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240807074655.52157-1-zhangzekun11@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible string for Rockchip RK3576 timer.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240802214612.434179-9-detlev.casanova@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible for smmu representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905193656.3785537-1-quic_nkela@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
