| Age | Commit message (Collapse) | Author |
|---|
|
Factor out a drbd_backing_dev_max_segments helper that checks the
backing device limitation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-4-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out a drbd_max_peer_bio_size helper for the peer I/O size,
and condense the various checks to a nested min3(..., max())) instead
of using a lot of local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a queue_limits structure with the max_hw_sectors limit to
blk_alloc_disk instead of updating the limit on the allocated gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret variable in the function has not yet been effective and can be
removed.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240306101444.1244-1-kunyu@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ret is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Link: https://lore.kernel.org/r/20240306100659.106521-1-kunyu@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
err is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20240306100216.69340-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
error is assigned first, so it does not need to initialize the assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20240306095608.26839-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the block_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305-class_cleanup-block-v1-1-130bb27b9c72@marliere.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a notes about the entry argument access at function exit probes for
kprobes and fprobe trace event.
Link: https://lore.kernel.org/all/170952367549.229804.8843506960483577062.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add kretprobe and function exit probe test cases for checking whether
those can access entry arguments at function exit correctly.
Link: https://lore.kernel.org/all/170952366504.229804.11605173085475141091.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.9/block
Pull MD fixes from Song:
"This set fixes two issues:
1. dmraid regression since 6.7 kernels. This issue was initially
reported in [1]. This set of fix has been reviewed and tested by
md and dm folks.
2. raid5 hang since 6.7 kernel, reported in [2]. We haven't got a
better fix for this issue yet. This revert is a workaround. It has
been applied to 6.7 stable kernels [3], and proved to be affective.
We will look more into this issue for a better fix.
[1] https://lore.kernel.org/linux-raid/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
[2] https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
[3] 87165c64fe1a in linux-6.7.y branch."
* tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
dm-raid: fix lockdep waring in "pers->hot_add_disk"
dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
dm-raid: add a new helper prepare_suspend() in md_personality
md/dm-raid: don't call md_reap_sync_thread() directly
dm-raid: really frozen sync_thread during suspend
md: add a new helper reshape_interrupted()
md: export helper md_is_rdwr()
md: export helpers to stop sync_thread
md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
|
|
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Remove redundant #else block for BTF args from README message.
This is a cleanup, so no change on the message.
Link: https://lore.kernel.org/all/170952364558.229804.17285528811097152410.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of incrementing the trace_probe::nr_args, init it at
trace_probe_init(). Without this change, there is no way to get the number
of trace_probe arguments while parsing it.
This is a cleanup, so the behavior is not changed.
Link: https://lore.kernel.org/all/170952363585.229804.13060759900346411951.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Cleanup traceprobe_parse_probe_arg_body() to split out the
type parser and post-processing part of fetch_insn.
This makes no functional change.
Link: https://lore.kernel.org/all/170952362603.229804.9942703761682605372.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot
flag there as well, and then use the commit API to change the transfer
size and logical block size dependent values.
This relies on the assumption that no I/O can be pending before the
devices moves into the ready state and doesn't need extra freezing
for changes to the queue limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most of the code in setup_blk_queue is shared between all disciplines.
Move it to common code and leave a method to query the maximum number
of transferable blocks, and a flag to indicate discard support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reflow dasd_state_basic_to_ready a bit to make it easier to modify.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Despite the fprobe event, "Kretprobe" was commented. So fix it.
Link: https://lore.kernel.org/all/170952361630.229804.10832200172327797860.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix an incorrect number of pages being released for buffers that do not
start at the beginning of a page.
Fixes: 1b151e2435fc ("block: Remove special-casing of compound pages")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Tested-by: Greg Edwards <gedwards@ddn.com>
Link: https://lore.kernel.org/r/86e592a9-98d4-4cff-a646-0c0084328356@cybernetics.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the instruction decoder, we are now able to decode and recognize
instructions with opcode extensions. There are more instructions in
these groups that can be boosted:
Group 2: ROL, ROR, RCL, RCR, SHL/SAL, SHR, SAR
Group 3: TEST, NOT, NEG, MUL, IMUL, DIV, IDIV
Group 4: INC, DEC (byte operation)
Group 5: INC, DEC (word/doubleword/quadword operation)
These instructions are not boosted previously because there are reserved
opcodes within the groups, e.g., group 2 with ModR/M.nnn == 110 is
unmapped. As a result, kprobes attached to them requires two int3 traps
as being non-boostable also prevents jump-optimization.
Some simple tests on QEMU show that after boosting and jump-optimization
a single kprobe on these instructions with an empty pre-handler runs 10x
faster (~1000 cycles vs. ~100 cycles).
Since these instructions are mostly ALU operations and do not touch
special registers like RIP, let's boost them so that we get the
performance benefit.
Link: https://lore.kernel.org/all/20240204031300.830475-4-jinghao7@illinois.edu/
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Both INT (INT n, INT1, INT3, INTO) and UD (UD0, UD1, UD2) serve special
purposes in the kernel, e.g., INT3 is used by KGDB and UD2 is involved
in LLVM-KCFI instrumentation. At the same time, attaching kprobes on
these instructions (particularly UD) will pollute the stack trace dumped
in the kernel ring buffer, since the exception is triggered in the copy
buffer rather than the original location.
Check for INT and UD in can_probe and reject any kprobes trying to
attach to these instructions.
Link: https://lore.kernel.org/all/20240204031300.830475-3-jinghao7@illinois.edu/
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Both can_probe and can_boost have int return type but are using int as
boolean in their context.
Refactor both functions to make them actually return boolean.
Link: https://lore.kernel.org/all/20240204031300.830475-2-jinghao7@illinois.edu/
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
This reverts commit 95bf25bb9ed5dedb7fb39f76489f7d6843ab0475.
Apparently there was a previous discussion about emulation of formats
and it was decided XRGB8888 was the only format to support for legacy
userspace [1]. Remove ARGB8888. Userspace needs to be fixed to accept
XRGB8888.
[1] https://lore.kernel.org/r/60dc7697-d7a0-4bf4-a22e-32f1bbb792c2@suse.de
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306063721.1.I4a32475190334e1fa4eef4700ecd2787a43c94b5@changeid
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
Move registration of the typec switch to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
This could potentially also trigger a bug in the DRM bridge
implementation which does not expect bridges to go away even if device
links may avoid triggering this (when enabled).
Move registration of the DRM aux bridge to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE")
Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The memory allocated for the identification is freed on failure. Set
it to NULL so the caller doesn't have a pointer to that freed address.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
"gpio2" as intended here, not "gpio1".
Fixes: 95daa868f22b ("regulator: lp8788-buck: Fully convert to GPIO descriptors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/19f62cc2-bdcf-46f7-a5c5-971ef05e1ea7@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the event value to the snd_soc_dapm_start and snd_soc_dapm_done trace
events to make them more informative.
Trace before:
aplay-229 [000] 250.140309: snd_soc_dapm_start: card=vscn-2046
aplay-229 [000] 250.167531: snd_soc_dapm_done: card=vscn-2046
aplay-229 [000] 251.169588: snd_soc_dapm_start: card=vscn-2046
aplay-229 [000] 251.195245: snd_soc_dapm_done: card=vscn-2046
Trace after:
aplay-214 [000] 693.290612: snd_soc_dapm_start: card=vscn-2046 event=1
aplay-214 [000] 693.315508: snd_soc_dapm_done: card=vscn-2046 event=1
aplay-214 [000] 694.537349: snd_soc_dapm_start: card=vscn-2046 event=2
aplay-214 [000] 694.563241: snd_soc_dapm_done: card=vscn-2046 event=2
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240306-improve-asoc-trace-events-v1-2-edb252bbeb10@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The snd_soc_bias_level_start and snd_soc_bias_level_done trace events
currently look like:
aplay-229 [000] 1250.140778: snd_soc_bias_level_start: card=vscn-2046 val=1
aplay-229 [000] 1250.140784: snd_soc_bias_level_done: card=vscn-2046 val=1
aplay-229 [000] 1250.140786: snd_soc_bias_level_start: card=vscn-2046 val=2
aplay-229 [000] 1250.140788: snd_soc_bias_level_done: card=vscn-2046 val=2
kworker/u8:1-21 [000] 1250.140871: snd_soc_bias_level_start: card=vscn-2046 val=1
kworker/u8:0-11 [000] 1250.140951: snd_soc_bias_level_start: card=vscn-2046 val=1
kworker/u8:0-11 [000] 1250.140956: snd_soc_bias_level_done: card=vscn-2046 val=1
kworker/u8:0-11 [000] 1250.140959: snd_soc_bias_level_start: card=vscn-2046 val=2
kworker/u8:0-11 [000] 1250.140961: snd_soc_bias_level_done: card=vscn-2046 val=2
kworker/u8:1-21 [000] 1250.167219: snd_soc_bias_level_done: card=vscn-2046 val=1
kworker/u8:1-21 [000] 1250.167222: snd_soc_bias_level_start: card=vscn-2046 val=2
kworker/u8:1-21 [000] 1250.167232: snd_soc_bias_level_done: card=vscn-2046 val=2
kworker/u8:0-11 [000] 1250.167440: snd_soc_bias_level_start: card=vscn-2046 val=3
kworker/u8:0-11 [000] 1250.167444: snd_soc_bias_level_done: card=vscn-2046 val=3
kworker/u8:1-21 [000] 1250.167497: snd_soc_bias_level_start: card=vscn-2046 val=3
kworker/u8:1-21 [000] 1250.167506: snd_soc_bias_level_done: card=vscn-2046 val=3
There are clearly multiple calls, one per component, but they cannot be
discriminated from each other.
Change the ftrace events to also print the component name, to make it clear
which part of the code is involved. This requires changing the passed value
from a struct snd_soc_card, where the DAPM context is not kwown, to a
struct snd_soc_dapm_context where it is obviously known but the a card
pointer is also available.
With this change, the resulting trace becomes:
aplay-247 [000] 1436.357332: snd_soc_bias_level_start: card=vscn-2046 component=(none) val=1
aplay-247 [000] 1436.357338: snd_soc_bias_level_done: card=vscn-2046 component=(none) val=1
aplay-247 [000] 1436.357340: snd_soc_bias_level_start: card=vscn-2046 component=(none) val=2
aplay-247 [000] 1436.357343: snd_soc_bias_level_done: card=vscn-2046 component=(none) val=2
kworker/u8:4-215 [000] 1436.357437: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=1
kworker/u8:5-231 [000] 1436.357518: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=1
kworker/u8:5-231 [000] 1436.357523: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=1
kworker/u8:5-231 [000] 1436.357526: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=2
kworker/u8:5-231 [000] 1436.357528: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=2
kworker/u8:4-215 [000] 1436.383217: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=1
kworker/u8:4-215 [000] 1436.383221: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=2
kworker/u8:4-215 [000] 1436.383231: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=2
kworker/u8:5-231 [000] 1436.383468: snd_soc_bias_level_start: card=vscn-2046 component=ff320000.i2s val=3
kworker/u8:5-231 [000] 1436.383472: snd_soc_bias_level_done: card=vscn-2046 component=ff320000.i2s val=3
kworker/u8:4-215 [000] 1436.383503: snd_soc_bias_level_start: card=vscn-2046 component=ff560000.codec val=3
kworker/u8:4-215 [000] 1436.383513: snd_soc_bias_level_done: card=vscn-2046 component=ff560000.codec val=3
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240306-improve-asoc-trace-events-v1-1-edb252bbeb10@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When nvme_identify_ns() fails, it frees the pointer to the struct
nvme_id_ns before it returns. However, ns_update_nuse() calls kfree()
for the pointer even when nvme_identify_ns() fails. This results in
KASAN double-free, which was observed with blktests nvme/045 with
proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by
skipping kfree() when nvme_identify_ns() fails.
Link: https://lore.kernel.org/linux-block/20240304161303.19681-1-dwagner@suse.de/ [1]
Fixes: a1a825ab6a60 ("nvme: add csi, ms and nuse to sysfs")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When a CPU is the last active in the hierarchy and it tries to enter
into idle, the quick check looking up the next event towards cpuidle
heuristics may report a too late expiry, such as in the following
scenario:
[GRP1:0]
migrator = NONE
active = NONE
nextevt = T0:0, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0, T1 nextevt = T2
/ \ / \
0 1 2 3
idle idle idle idle
0) The whole system is idle, and CPU 0 was the last migrator. CPU 0 has
a timer (T0), CPU 1 has a timer (T1) and CPU 2 has a timer (T2). The
expire order is T0 < T1 < T2.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0(i), T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU0 migrator = NONE
active = CPU0 active = NONE
nextevt = T0(i), T1 nextevt = T2
/ \ / \
0 1 2 3
active idle idle idle
1) CPU 0 becomes active. The (i) means a now ignored timer.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU0 migrator = NONE
active = CPU0 active = NONE
nextevt = T1 nextevt = T2
/ \ / \
0 1 2 3
active idle idle idle
2) CPU 0 handles remote. No timer actually expired but ignored timers
have been cleaned out and their sibling's timers haven't been
propagated. As a result the top level's next event is T2 and not T1.
3) CPU 0 tries to enter idle without any global timer enqueued and calls
tmigr_quick_check(). The expiry of T2 is returned instead of the
expiry of T1.
When the quick check returns an expiry that is too late, the cpuidle
governor may pick up a C-state that is too deep. This may be result into
undesired CPU wake up latency if the next timer is actually close enough.
Fix this with assuming that expiries aren't sorted top-down while
performing the quick check. Pick up instead the earliest encountered one
while walking up the hierarchy.
7ee988770326 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240305002822.18130-1-frederic@kernel.org
|
|
Move psr_init_dpcd() from init-connector to connector-detect
function. The dpcd probe for checking panel replay capability
for external dp connector is causing delay during boot which can
be optimized by moving dpcd probe to connector specific detect().
v1: Initial version.
v2: Add details in commit description. [Jani]
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10284
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Fixes: cceeaa312d39 ("drm/i915/panelreplay: Enable panel replay dpcd initialization for DP")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229043716.4065760-1-animesh.manna@intel.com
(cherry picked from commit 1cca19bf296fae0636a637b48d195ac6b4d430c9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Borislav reported that one of his systems has a broken MADT table which
advertises eight present APICs and 24 non-present APICs in the same
package.
The non-present ones are considered hot-pluggable by the topology
evaluation code, which is obviously bogus as there is no way to hot-plug
within the same package.
As the topology evaluation code accounts for hot-pluggable CPUs in a
package, the maximum number of cores per package is computed wrong, which
in turn causes the uncore performance counter driver to access non-existing
MSRs. It will probably confuse other entities which rely on the maximum
number of cores and threads per package too.
Cure this by ignoring hot-pluggable APIC IDs within a present package.
In theory it would be reasonable to just do this unconditionally, but then
there is this thing called reality^Wvirtualization which ruins
everything. Virtualization is the only existing user of "physical" hotplug
and the virtualization tools allow the above scenario. Whether that is
actually in use or not is unknown.
As it can be argued that the virtualization case is not affected by the
issues which exposed the reported problem, allow the bogosity if the kernel
determined that it is running in a VM for now.
Fixes: 89b0f15f408f ("x86/cpu/topology: Get rid of cpuinfo::x86_max_cores")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/87a5nbvccx.ffs@tglx
|
|
Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ")
also removed the call to free_irq() in pci_remove(), leading to a
leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove()
when unbinding the driver from the device
remove_proc_entry: removing non-empty directory 'irq/136', leaking at
least 'firewire_ohci'
Call Trace:
? remove_proc_entry+0x19c/0x1c0
? __warn+0x81/0x130
? remove_proc_entry+0x19c/0x1c0
? report_bug+0x171/0x1a0
? console_unlock+0x78/0x120
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? remove_proc_entry+0x19c/0x1c0
unregister_irq_proc+0xf4/0x120
free_desc+0x3d/0xe0
? kfree+0x29f/0x2f0
irq_free_descs+0x47/0x70
msi_domain_free_locked.part.0+0x19d/0x1d0
msi_domain_free_irqs_all_locked+0x81/0xc0
pci_free_msi_irqs+0x12/0x40
pci_disable_msi+0x4c/0x60
pci_remove+0x9d/0xc0 [firewire_ohci
01b483699bebf9cb07a3d69df0aa2bee71db1b26]
pci_device_remove+0x37/0xa0
device_release_driver_internal+0x19f/0x200
unbind_store+0xa1/0xb0
remove irq with devm_free_irq() before pci_disable_msi()
also remove it in fail_msi: of pci_probe() as this would lead to
an identical leak
Cc: stable@vger.kernel.org
Fixes: 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ")
Signed-off-by: Edmund Raile <edmund.raile@proton.me>
Link: https://lore.kernel.org/r/20240229144723.13047-2-edmund.raile@proton.me
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The DSC HW state of DP connectors is read out during driver loading and
system resume in intel_modeset_update_connector_atomic_state(). This
function is called for all connectors though and so the state of DSI
connectors will also get updated incorrectly, triggering a WARN there
wrt. the DSC decompression AUX device.
Fix the above by moving the DSC state readout to a new DP connector
specific sync_state() hook. This is anyway the logical place to update
the connector object's state vs. the connector's atomic state.
Fixes: b2608c6b3212 ("drm/i915/dp_mst: Enable MST DSC decompression for all streams")
Reported-and-tested-by: Drew Davenport <ddavenport@chromium.org>
Closes: https://lore.kernel.org/all/Zb0q8IDVXS0HxJyj@chromium.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205132631.1588577-1-imre.deak@intel.com
(cherry picked from commit a62e145981500996ea76af3d740ce0c0d74c5be0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Third argument of i915_request_wait() accepts a timeout value in jiffies.
Most users pass either a simple HZ based expression, or a result of
msecs_to_jiffies(), or MAX_SCHEDULE_TIMEOUT, or a very small number not
exceeding 4 if applicable as that value. However, there is one user --
intel_selftest_wait_for_rq() -- that passes a WAIT_FOR_RESET_TIME symbol,
defined as a large constant value that most probably represents a desired
timeout in ms. While that usage results in the intended value of timeout
on usual x86_64 kernel configurations, it is not portable across different
architectures and custom kernel configs.
Rename the symbol to clearly indicate intended units and convert it to
jiffies before use.
Fixes: 3a4bfa091c46 ("drm/i915/selftest: Fix workarounds selftest for GuC submission")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222113347.648945-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 6ee3f54b880c91ab2e244eb4ffd4bfed37832b25)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code was shuffled around a bit recently. We no longer need to
check the value of "ret" because we know it's zero.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
fanotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-3-vi@endrift.com>
|
|
Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
fsnotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-2-vi@endrift.com>
|
|
Several file system notification system headers have "writable"
misspelled as "writtable" in the comments. This patch fixes it in the
inotify header.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240306020831.1404033-1-vi@endrift.com>
|
|
Jakub Kicinski says:
====================
tools: ynl: add --dbg-small-recv for easier kernel testing
When testing netlink dumps I usually hack some user space up
to constrain its user space buffer size (iproute2, ethtool or ynl).
Netlink will try to fill the messages up, so since these apps use
large buffers by default, the dumps are rarely fragmented.
I was hoping to figure out a way to create a selftest for dump
testing, but so far I have no idea how to do that in a useful
and generic way.
Until someone does that, make manual dump testing easier with YNL.
Create a special option for limiting the buffer size, so I don't
have to make the same edits each time, and maybe others will benefit,
too :)
Example:
$ ./cli.py [...] --dbg-small-recv >/dev/null
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
Now let's make the DONE not fit in the last message:
$ ./cli.py [...] --dbg-small-recv 4499 >/dev/null
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 4480 bytes, 35 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 20 bytes, 1 messages
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
A real test would also have to check the messages are complete
and not duplicated. That part has to be done manually right now.
Note that the first message is always conservatively sized by the kernel.
Still, I think this is good enough to be useful.
v2:
- patch 2:
- move the recv_size setting up
- change the default to 0 so that cli.py doesn't have to worry
what the "unset" value is
v1: https://lore.kernel.org/all/20240301230542.116823-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.
Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).
Example:
$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
(the [...] are edits to shorten the commit message).
Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tools: ynl: clean up make clean
First change renames the clean target which removes build results,
to a more common name. Second one add missing .PHONY targets.
Third one ensures that clean deletes __pycache__.
v2: add patch 2
v1: https://lore.kernel.org/all/20240301235609.147572-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
