summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-24RDMA/hns: Increase checking CMQ status timeout valueWei Hu(Xavier)
This patch increases checking CMQ status timeout value and uses the same value with NIC driver to avoid deficiency of time. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/hns: Modify uar allocation algorithm to avoid bitmap exhaustWei Hu(Xavier)
This patch modified uar allocation algorithm in hns_roce_uar_alloc function to avoid bitmap exhaust. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24Merge tag 'mlx5-updates-2018-05-17' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into for-next mlx5-updates-2018-05-17 mlx5 core dirver updates for both net-next and rdma-next branches. From Christophe JAILLET, first three patche to use kvfree where needed. From: Or Gerlitz <ogerlitz@mellanox.com> Next six patches from Roi and Co adds support for merged sriov e-switch which comes to serve cases where both PFs, VFs set on them and both uplinks are to be used in single v-switch SW model. When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. This model allows to offload TC eswitch rules between VFs belonging to different PFs (and hence have different eswitch affinity), it also sets the some of the foundations needed for uplink LAG support. * tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5e: Explicitly set source e-switch in offloaded TC rules net/mlx5: Add source e-switch owner net/mlx5e: Explicitly set destination e-switch in FDB rules net/mlx5: Add destination e-switch owner net/mlx5: Properly handle a vport destination when setting FTE net/mlx5: Add merged e-switch cap IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
2018-05-24IB/core: Introduce and use rdma_gid_table()Parav Pandit
There are several places a gid table is accessed. Have a helper tiny function rdma_gid_table() to avoid code duplication at such places. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Reduce the places that use zgidParav Pandit
Instead of open coding memcmp() to check whether a given GID is zero or not, use a helper function to do so, and replace instances of memcpy(z,&zgid) with memset. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/mlx5: Fetch soft WQE's on fatal error stateErez Shitrit
On fatal error the driver simulates CQE's for ULPs that rely on completion of all their posted work-request. For the GSI traffic, the mlx5 has its own mechanism that sends the completions via software CQE's directly to the relevant CQ. This should be kept in fatal error too, so the driver should simulate such CQE's with the specified error state in order to complete GSI QP work requests. Without the fix the next deadlock might appears: schedule_timeout+0x274/0x350 wait_for_common+0xec/0x240 mcast_remove_one+0xd0/0x120 [ib_core] ib_unregister_device+0x12c/0x230 [ib_core] mlx5_ib_remove+0xc4/0x270 [mlx5_ib] mlx5_detach_device+0x184/0x1a0 [mlx5_core] mlx5_unload_one+0x308/0x340 [mlx5_core] mlx5_pci_err_detected+0x74/0xe0 [mlx5_core] Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/ucm: Mark UCM interface as BROKENLeon Romanovsky
In commit 357d23c811a7 ("Remove the obsolete libibcm library") in rdma-core [1], we removed obsolete library which used the /dev/infiniband/ucmX interface. Following multiple syzkaller reports about non-sanitized user input in the UCMA module, the short audit reveals the same issues in UCM module too. It is better to disable this interface in the kernel, before syzkaller team invests time and energy to harden this unused interface. [1] https://github.com/linux-rdma/rdma-core/pull/279 Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Remove duplicate declaration of gid_cache_wqParav Pandit
Remove duplicate declaration of gid_cache_wq. Fixes: d41861942 ("IB/core: Add generic function to extract IB speed from netdev") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/mlx5: Remove debug prints of VMA pointersLeon Romanovsky
Remove various prints of VMA pointers. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/hns: Rename the idx field of dboulijun
The lower 15 bit of paramter of db structure means different meanings when db type is sq, rq and srq. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/qib: Fix DMA api warning with debug kernelMike Marciniszyn
The following error occurs in a debug build when running MPI PSM: [ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158 check_unmap+0x4ee/0xa20 [ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page] [ 307.517494] Modules linked in: [ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core [ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod [ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013 [ 307.944206] Call Trace: [ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b [ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100 [ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20 [ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0 [ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0 [ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0 [ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib] [ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib] [ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80 [ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0 [ 308.266025] qib_ib0.8006: multicast join failed for ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22 [ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0 [ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510 [ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100 [ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21 The code calls a qib_map_page() which has never correctly tested for a mapping error. Fix by testing for pci_dma_mapping_error() in all cases and properly handling the failure in the caller. Additionally, streamline qib_map_page() arguments to satisfy just the single caller. Cc: <stable@vger.kernel.org> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Tested-by: Don Dutile <ddutile@redhat.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/isert: Fix for lib/dma_debug check_sync warningAlex Estrin
The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/{rdmavt,hfi1}: Change hrtimer add to use pinned versionMike Marciniszyn
Given we are dealing with nano-second level timers, when the timer pops, ensure it happens on the CPU which caused the timer to be set in the first place. This avoids excessive jitter from the desired expiration time by avoiding the cost of switching our context to another CPU that is cache cold for this given timer. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Set port number for errorinfo MAD responseMichael J. Ruhl
For errorinfo MAD requests, the response has a 0 port number left over from a memset. Instead we should always set the port number in the response. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Cleanup of exp_rcvMike Marciniszyn
The knowledge of the internal workings of the expect receive is too distributed. Fix by: - right size several rcd fields associated with expect receive - making an init entrance to init all the lists - consolidate all the allocations into an array anchored in the rcd Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Add 16B Management Packet trace supportDon Hiatt
Add trace support for 16B Management Packets. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Add support for 16B Management PacketsDon Hiatt
16B Management Packets (L4=0x08) replace the BTH and DETH of normal MAD packet packets with a header containing the the source and destination queue pair numbers; fields that were originally retrieved from the BTH/DETH are now populated from this header as well as from the 16B LRH (e.g. pkey). 16B Management Packets are used as an optimized management format on 16B fabrics. These management packets have an opcode of IB_OPCODE_UD_SEND_ONLY, a fixed 3Byte pad, and a header length of 24Bytes. The decision as to when we send a management packet is based upon either the source or destination queue pair number being 0 or 1. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Define 16B Management PacketsDon Hiatt
Add 16B Management Packet definition. This optimized packet format replaces the ib_other_headers and BTH with a source and destination QP number. To support these packets we introduce struct opa_16b_mgmt into the struct hfi1_16b_header. This packet format is only used for MAD packets using the IB_OPCODE_UD_SEND_ONLY opcode on QP0/1. The original 16B implementation failed to use 16B management packets so now we add their definition. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed driver-specific MR informationSteve Wise
Add a table of important fields from the fw_ri_tpte structure to the mr resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed driver-specific CQ informationSteve Wise
Add a table of important fields from the c4iw_cq* structures to the cq resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed provider-specific CM_ID informationSteve Wise
Add a table of important fields from the c4iw_ep* structures to the cm_id resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-23RDMA/hns: Move the location for initializing tmp_lenoulijun
When posted work request, it need to compute the length of all sges of every wr and fill it into the msg_len field of send wqe. Thus, While posting multiple wr, tmp_len should be reinitialized to zero. Fixes: 8b9b8d143b46 ("RDMA/hns: Fix the endian problem for hns") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-23RDMA/hns: Bugfix for cq record db for kerneloulijun
When use cq record db for kernel, it needs to set the hr_cq->db_en to 1 and configure the dma address of record cq db of qp context. Fixes: 86188a8810ed ("RDMA/hns: Support cq record doorbell for kernel space") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-23IB/uverbs: Fix uverbs_attr_get_objJason Gunthorpe
The err pointer comes from uverbs_attr_get, not from the uobject member, which does not store an ERR_PTR. Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-05-23RDMA/qedr: Fix doorbell bar mapping for dpi > 1Kalderon, Michal
Each user_context receives a separate dpi value and thus a different address on the doorbell bar. The qedr_mmap function needs to validate the address and map the doorbell bar accordingly. The current implementation always checked against dpi=0 doorbell range leading to a wrong mapping for doorbell bar. (It entered an else case that mapped the address differently). qedr_mmap should only be used for doorbells, so the else was actually wrong in the first place. This only has an affect on arm architecture and not an issue on a x86 based architecture. This lead to doorbells not occurring on arm based systems and left applications that use more than one dpi (or several applications run simultaneously ) to hang. Fixes: ac1b36e55a51 ("qedr: Add support for user context verbs") Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-22RDMA/ipoib: drop skb on path record lookup failureEvgenii Smirnov
In unicast_arp_send function there is an inconsistency in error handling of path_rec_start call. If path_rec_start is called because of an absent ah field, skb will be dropped. But if it is called on a creation of a new path, or if the path is invalid, skb will be added to the tail of path queue. In case of a new path it will be dropped on path_free, but in case of invalid path it can stay in the queue forever. This patch unifies the behavior, dropping skb in all cases of path_rec_start failure. Signed-off-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-22RDMA/CMA: add rdma_iw_cm_id() and rdma_res_to_id() helpersSteve Wise
Add a helper function for iwarp drivers to be able to map an rdma_cm_id to an iw_cm_id. This is useful for dumping driver specific NLDEV/RESTRACK connection state. Add a helper to return the rdma_cm_id pointer from the rdma_restack pointer. This is needed for rdma drivers to map a res entry back to the public rdma_cm_id struct. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-22iw_cxgb4: always set iw_cm_id.provider_dataSteve Wise
In active side connections, the provider_data field is not getting set. This will be used in a subsequent patch to dump state, so always set it. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-22RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE eventsDoug Ledford
We do a light flush on CLIENT_REREG and SM_CHANGE events. This goes through and marks paths invalid. But we weren't always checking for this validity when we needed to, and so we could keep using a path marked invalid. What's more, once we establish a path with a valid ah, we put a pointer to the ah in the neigh struct directly, so even if we mark the path as invalid, as long as the neigh has a direct pointer to the ah, it keeps using the old, outdated ah. To fix this we do several things. 1) Put the valid flag in the ah instead of the path struct, so when we put the ah pointer directly in the neigh struct, we can easily check the validity of the ah on send events. 2) Check the neigh->ah and neigh->ah->valid elements in the needed places, and if we have an ah, but it's invalid, then invoke a refresh of the ah. 3) Fix the various places that check for path, but didn't check for path->valid (now path->ah && path->ah->valid). Reported-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-17net/mlx5e: Explicitly set source e-switch in offloaded TC rulesShahar Klein
Set a specific source e-switch when setting a rule that matches on the ingress port. Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17net/mlx5: Add source e-switch ownerShahar Klein
The source e-switch owner allows a vport on one e-switch port be associated with a rule defined on the second port e-switch. The role of the source eswitch owner valid bit in the flow group is to allow the firmware fail driver attempts to wild card the source eswitch match field. If this bit is not set, the firmware ignores the source eswitch owner field totally. Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17net/mlx5e: Explicitly set destination e-switch in FDB rulesRabie Loulou
Set a specific destination e-switch when setting a destination vport. Signed-off-by: Rabie Loulou <rabiel@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17net/mlx5: Add destination e-switch ownerShahar Klein
The destination e-switch owner allows a rule in namespace of one e-switch owner to point to a vport that is natively associated with another e-switch owner. Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17net/mlx5: Properly handle a vport destination when setting FTEShahar Klein
When creating FTE, properly distinguish between destination being vport or tir. The previous code just worked accidentally b/c of both dest being in the same offset within a union. Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17net/mlx5: Add merged e-switch capRoi Dayan
When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. Under merged eswitch, both the matching on source vport and setting destination vport can have a 2nd attribute which is the vhca id of the eswitch owner. For example: esw0: {match: <src vport=1 owner=0> action: fwd to <dst vport=7, owner=1>} is a flow set on eswitch0 matching on source vport=1 from his eswitch and the action being fwd to dest vport=7 of eswitch1. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Or Gerlitz Klein <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-17IB/rxe: avoid calling WARN_ON_ONCE twiceZhu Yanjun
In the exit branch, WARN_ON_ONCE is called to show stack. So it is not necessary to call WARN_ON_ONCE before going to exit. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16RDMA/hns: Add 64KB page size support for hip08Yixian Liu
This patch adds the support of 64KB page size for hip08 in kernel. Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/ipoib: replace local_irq_disable() with proper lockingSebastian Andrzej Siewior
In ipoib_mcast_restart_task() the netif_addr_lock() is invoked prior local_irq_save(). netif_addr_lock() should not be invoked in interrupt disabled section, only in BH disabled sections. The priv->lock is always acquired with disabled interrupts. The only place where netif_addr_lock() and priv->lock nest ist ipoib_mcast_restart_task(). Drop the local_irq_save() and acquire priv->lock with spin_lock_irq() inside the netif_addr locked section. It's safe to do so because the caller is either a worker function or __ipoib_ib_dev_flush() which are both calling with interrupts enabled (and since BH is enabled here, too so netif_addr_lock_bh() needs to be used). Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Expose MPLS related tunneling offloadsAriel Levkovich
This patch reports the device's capbilities to offload encapsulated MPLS tunnel protocols to user-space: - Capability to offload MPLS over GRE. - Capability to offload MPLS over UDP. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Add support for MPLS flow specificationAriel Levkovich
This patch introduces support for the MPLS flow spec and allows the creation of rules that are matching on the MPLS label. Applying the rule matching depends on the flow specs order and the location of the MPLS in the spec list as there are different configurations to be made in the device in the cases of MPLSoGRE and MPLSoUDP vs. non-encapsulated MPLS. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Add support for GRE flow specificationAriel Levkovich
This patch introduces support for the GRE flow spec and allowing the creation of rules based on the protocol and key fields that are part of GRE protocol header. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/uverbs: Introduce a MPLS steering match filterAriel Levkovich
Add a new MPLS steering match filter that can match against a single MPLS tag field. Since the MPLS header can reside in different locations in the packet's protocol stack as well as be encapsulated with a tunnel protocol, it is required to know the exact location of the header in the protocol stack. Therefore, when including the MPLS protocol spec in the specs list, it is mandatory to provide the list in an ordered manner, so that it represents the actual header order in a matching packet. Drivers that process the spec list and apply the matching rule should treat the position of the MPLS spec in the spec list as the actual location of the MPLS label in the packet's protocol stack. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/uverbs: Expose MPLS flow spec to the user-kernel ABI headerAriel Levkovich
Add ib_uverbs_flow_spec_mpls to define a rule to match the MPLS protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_mpls_filter and includes a single 32bit field named 'label' which consists of: Bits 0:19 - The MPLS label. Bits 20:22 - Traffic class field. Bit 23 - Bottom of stack bit. Bits 24:31 - Time to live (TTL) field. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/uverbs: Introduce a GRE steering match filterAriel Levkovich
Adding a new GRE steering match filter that can match against key and protocol fields. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/uverbs: Expose GRE flow spec to the user-kernel ABI headerAriel Levkovich
Add ib_uverbs_flow_spec_gre to define a rule to match the GRE encapsulation protocol. The spec includes the generic specs header, type, size and reserved fields while the filter itself is defined as ib_uverbs_flow_gre_filter and includes: 1. Checksum present bit, key present bit and version bits in a single 16bit field. 2. Protocol type field - Indicates the ether protocol type of the encapsulated payload. 3. Key field - present if key bit is set and contains an application specific key value. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'Christophe JAILLET
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to free it. Fixes: 1cbe6fc86ccfe ("IB/mlx5: Add support for CQE compressing") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-16net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'Christophe JAILLET
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to free it. Fixes: fed9ce22bf8ae ("net/mlx5: E-Switch, Add API to create vport rx rules") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-16net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'Christophe JAILLET
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to free it. Fixes: 9efa75254593d ("net/mlx5_core: Introduce access functions to query vport RoCE fields") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-16IB/cm: Store and restore ah_attr during CM message processingParav Pandit
During CM request processing flow, ah_attr is initialized twice. First based on wc. Secondly based on primary path record. ah_attr initialization from path record can fail, which leads to ah_attr zeroed out. Therefore, always initialize ah_attr on stack during reinitialization phase. If ah_attr init is successful, use the new ah_attry by overwriting the old one. If the ah_attr init fails, continue to use the last ah_attr. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/cm: Store and restore ah_attr during LAP msg processingParav Pandit
During CM LAP processing, ah_attr is reinitialized on receiving LAP request. First likely during CM request processing. ah_attr might get zero out if LAP processing fails. Therefore, attempt to create new ah_attr for the LAP message. If the initialization fails, continue with older ah_attr. If the initialization passes, consider the new ah_attr by overwriting the older one. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-16 18:44:03 +0000