| Age | Commit message (Collapse) | Author |
|---|
|
AVIC is now inhibited if the guest changes the apic id,
and therefore this code is no longer needed.
There are several ways this code was broken, including:
1. a vCPU was only allowed to change its apic id to an apic id
of an existing vCPU.
2. After such change, the vCPU whose apic id entry was overwritten,
could not correctly change its own apic id, because its own
entry is already overwritten.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Neither of these settings should be changed by the guest and it is
a burden to support it in the acceleration code, so just inhibit
this code instead.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These days there are too many AVIC/APICv inhibit
reasons, and it doesn't hurt to have some documentation
for them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Assign shadow_me_value, not shadow_me_mask, to PAE root entries,
a.k.a. shadow PDPTRs, when host memory encryption is supported. The
"mask" is the set of all possible memory encryption bits, e.g. MKTME
KeyIDs, whereas "value" holds the actual value that needs to be
stuffed into host page tables.
Using shadow_me_mask results in a failed VM-Entry due to setting
reserved PA bits in the PDPTRs, and ultimately causes an OOPS due to
physical addresses with non-zero MKTME bits sending to_shadow_page()
into the weeds:
set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.
BUG: unable to handle page fault for address: ffd43f00063049e8
PGD 86dfd8067 P4D 0
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:mmu_free_root_page+0x3c/0x90 [kvm]
kvm_mmu_free_roots+0xd1/0x200 [kvm]
__kvm_mmu_unload+0x29/0x70 [kvm]
kvm_mmu_unload+0x13/0x20 [kvm]
kvm_arch_destroy_vm+0x8a/0x190 [kvm]
kvm_put_kvm+0x197/0x2d0 [kvm]
kvm_vm_release+0x21/0x30 [kvm]
__fput+0x8e/0x260
____fput+0xe/0x10
task_work_run+0x6f/0xb0
do_exit+0x327/0xa90
do_group_exit+0x35/0xa0
get_signal+0x911/0x930
arch_do_signal_or_restart+0x37/0x720
exit_to_user_mode_prepare+0xb2/0x140
syscall_exit_to_user_mode+0x16/0x30
do_syscall_64+0x4e/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: e54f1ff244ac ("KVM: x86/mmu: Add shadow_me_value and repurpose shadow_me_mask")
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20220608012015.19566-1-yuan.yao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.19, take #1
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
|
|
into HEAD
KVM/riscv fixes for 5.19, take #1
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
|
|
The layout of 'struct kvm_vcpu_arch' has evolved significantly since
the initial port of KVM/arm64, so remove the stale comment suggesting
that a prefix of the structure is used exclusively from assembly code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-7-will@kernel.org
|
|
host_stage2_try() asserts that the KVM host lock is held, so there's no
need to duplicate the assertion in its wrappers.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-6-will@kernel.org
|
|
has_vhe() expands to a compile-time constant when evaluated from the VHE
or nVHE code, alternatively checking a static key when called from
elsewhere in the kernel. On face value, this looks like a case of
premature optimization, but in fact this allows symbol references on
VHE-specific code paths to be dropped from the nVHE object.
Expand the comment in has_vhe() to make this clearer, hopefully
discouraging anybody from simplifying the code.
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-5-will@kernel.org
|
|
Ignore 'kvm-arm.mode=protected' when using VHE so that kvm_get_mode()
only returns KVM_MODE_PROTECTED on systems where the feature is available.
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-4-will@kernel.org
|
|
A protected VM accessing ID_AA64ISAR2_EL1 gets punished with an UNDEF,
while it really should only get a zero back if the register is not
handled by the hypervisor emulation (as mandated by the architecture).
Introduce all the missing ID registers (including the unallocated ones),
and have them to return 0.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-3-will@kernel.org
|
|
If we fail to allocate the 'supported_cpus' cpumask in kvm_arch_init_vm()
then be sure to return -ENOMEM instead of success (0) on the failure
path.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609121223.2551-2-will@kernel.org
|
|
Commit fed9b26b2501 ("MAINTAINERS: Update KVM RISC-V entry to cover
selftests support") optimistically adds a file entry for
tools/testing/selftests/kvm/riscv/, but this directory does not exist.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference. The script is very useful to keep MAINTAINERS up to date
and MAINTAINERS can be kept in a state where the script emits no warning.
So, just drop the non-matching file entry rather than starting to collect
exceptions of entries that may match in some close or distant future.
Fixes: fed9b26b2501 ("MAINTAINERS: Update KVM RISC-V entry to cover selftests support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently the state of the speaker port (0x61) data bit (bit 1) is not
saved in the exported state (kvm_pit_state2) and hence is lost when
re-constructing guest state.
This patch removes the 'speaker_data_port' field from kvm_kpit_state and
instead tracks the state using a new KVM_PIT_FLAGS_SPEAKER_DATA_ON flag
defined in the API.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Message-Id: <20220531124421.1427-1-pdurrant@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add an on-by-default module param, error_on_inconsistent_vmcs_config, to
allow rejecting the load of kvm_intel if an inconsistent VMCS config is
detected. Continuing on with an inconsistent, degraded config is
undesirable in the vast majority of use cases, e.g. may result in a
misconfigured VM, poor performance due to lack of fast MSR switching, or
even security issues in the unlikely event the guest is relying on MPX.
Practically speaking, an inconsistent VMCS config should never be
encountered in a production quality environment, e.g. on bare metal it
indicates a silicon defect (or a disturbing lack of validation by the
hardware vendor), and in a virtualized machine (KVM as L1) it indicates a
buggy/misconfigured L0 VMM/hypervisor.
Provide a module param to override the behavior for testing purposes, or
in the unlikely scenario that KVM is deployed on a flawed-but-usable CPU
or virtual machine.
Note, what is or isn't an inconsistency is somewhat subjective, e.g. one
might argue that LOAD_EFER without SAVE_EFER is an inconsistency. KVM's
unofficial guideline for an "inconsistency" is either scenarios that are
completely nonsensical, e.g. the existing checks on having EPT/VPID knobs
without EPT/VPID, and/or scenarios that prevent KVM from virtualizing or
utilizing a feature, e.g. the unpaired entry/exit controls checks. Other
checks that fall into one or both of the covered scenarios could be added
in the future, e.g. asserting that a VMCS control exists available if and
only if the associated feature is supported in bare metal.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220527170658.3571367-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Sanitize the VM-Entry/VM-Exit control pairs (load+load or load+clear)
during setup instead of checking both controls in a pair at runtime. If
only one control is supported, KVM will report the associated feature as
not available, but will leave the supported control bit set in the VMCS
config, which could lead to corruption of host state. E.g. if only the
VM-Entry control is supported and the feature is not dynamically toggled,
KVM will set the control in all VMCSes and load zeros without restoring
host state.
Note, while this is technically a bug fix, practically speaking no sane
CPU or VMM would support only one control. KVM's behavior of checking
both controls is mostly pedantry.
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220527170658.3571367-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Whenever an MSR is part of KVM_GET_MSR_INDEX_LIST, as is the case for
MSR_K7_EVNTSEL0 or MSR_F15H_PERF_CTL0, it has to be always retrievable
and settable with KVM_GET_MSR and KVM_SET_MSR.
Accept a zero value for these MSRs to obey the contract.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220601031925.59693-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Once vPMU is disabled, the KVM would not expose features like:
PEBS (via clear kvm_pmu_cap.pebs_ept), legacy LBR and ARCH_LBR,
CPUID 0xA leaf, PDCM bit and MSR_IA32_PERF_CAPABILITIES, plus
PT_MODE_HOST_GUEST mode.
What this group of features has in common is that their use
relies on the underlying PMU counter and the host perf_event as a
back-end resource requester or sharing part of the irq delivery path.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220601031925.59693-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The BTS feature (including the ability to set the BTS and BTINT
bits in the DEBUGCTL MSR) is currently unsupported on KVM.
But we may try using the BTS facility on a PEBS enabled guest like this:
perf record -e branches:u -c 1 -d ls
and then we would encounter the following call trace:
[] unchecked MSR access error: WRMSR to 0x1d9 (tried to write 0x00000000000003c0)
at rIP: 0xffffffff810745e4 (native_write_msr+0x4/0x20)
[] Call Trace:
[] intel_pmu_enable_bts+0x5d/0x70
[] bts_event_add+0x54/0x70
[] event_sched_in+0xee/0x290
As it lacks any CPUID indicator or perf_capabilities valid bit
fields to prompt for this information, the platform would hint
the Intel BTS feature unavailable to guest by setting the
BTS_UNAVAIL bit in the IA32_MISC_ENABLE.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220601031925.59693-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On some virt platforms (L1 guest w/o PMU), the value of module parameter
'enable_pmu' for nested L2 guests should be updated at initialisation.
Considering that there is no concept of "architecture pmu" in AMD or Hygon
and that the versions (prior to Zen 4) are all 0, but that the theoretical
available counters are at least AMD64_NUM_COUNTERS, the utility
check_hw_exists() is reused in the initialisation call path.
Opportunistically update Intel specific comments.
Fixes: 8eeac7e999e8 ("KVM: x86/pmu: Add kvm_pmu_cap to optimize perf_get_x86_pmu_capability")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the PMU is broken due to firmware issues, check_hw_exists() will return
false but perf_get_x86_pmu_capability() will still return data from x86_pmu.
Likewise if some of the hotplug callbacks cannot be installed the contents
of x86_pmu will not be reverted.
Handle the failure in both cases by clearing x86_pmu if init_hw_perf_events()
or reverts to software events only.
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Starting from v5.12, KVM reports guest LBR and extra_regs support
when the host has relevant support. Just delete this part of the
comment and fix a typo incidentally.
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220517154100.29983-2-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are cases that malicious virtual machines can cause CPU stuck (due
to event windows don't open up), e.g., infinite loop in microcode when
nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and
IRQ) can be delivered. It leads the CPU to be unavailable to host or
other VMs.
VMM can enable notify VM exit that a VM exit generated if no event
window occurs in VM non-root mode for a specified amount of time (notify
window).
Feature enabling:
- The new vmcs field SECONDARY_EXEC_NOTIFY_VM_EXITING is introduced to
enable this feature. VMM can set NOTIFY_WINDOW vmcs field to adjust
the expected notify window.
- Add a new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT so that user space
can query and enable this feature in per-VM scope. The argument is a
64bit value: bits 63:32 are used for notify window, and bits 31:0 are
for flags. Current supported flags:
- KVM_X86_NOTIFY_VMEXIT_ENABLED: enable the feature with the notify
window provided.
- KVM_X86_NOTIFY_VMEXIT_USER: exit to userspace once the exits happen.
- It's safe to even set notify window to zero since an internal hardware
threshold is added to vmcs.notify_window.
VM exit handling:
- Introduce a vcpu state notify_window_exits to records the count of
notify VM exits and expose it through the debugfs.
- Notify VM exit can happen incident to delivery of a vector event.
Allow it in KVM.
- Exit to userspace unconditionally for handling when VM_CONTEXT_INVALID
bit is set.
Nested handling
- Nested notify VM exits are not supported yet. Keep the same notify
window control in vmcs02 as vmcs01, so that L1 can't escape the
restriction of notify VM exits through launching L2 VM.
Notify VM exit is defined in latest Intel Architecture Instruction Set
Extensions Programming Reference, chapter 9.2.
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Co-developed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-5-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add kvm_caps to hold a variety of capabilites and defaults that aren't
handled by kvm_cpu_caps because they aren't CPUID bits in order to reduce
the amount of boilerplate code required to add a new feature. The vast
majority (all?) of the caps interact with vendor code and are written
only during initialization, i.e. should be tagged __read_mostly, declared
extern in x86.h, and exported.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220524135624.22988-4-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a selftest for triple fault event:
- launch the L2 and exit to userspace via I/O.
- using KVM_SET_VCPU_EVENTS to pend a triple fault event.
- with the immediate_exit, check the triple fault is pending.
- run for real with pending triple fault and L1 can see the triple
fault.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-3-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For the triple fault sythesized by KVM, e.g. the RSM path or
nested_vmx_abort(), if KVM exits to userspace before the request is
serviced, userspace could migrate the VM and lose the triple fault.
Extend KVM_{G,S}ET_VCPU_EVENTS to support pending triple fault with a
new event KVM_VCPUEVENT_VALID_FAULT_FAULT so that userspace can save and
restore the triple fault event. This extension is guarded by a new KVM
capability KVM_CAP_TRIPLE_FAULT_EVENT.
Note that in the set_vcpu_events path, userspace is able to set/clear
the triple fault request through triple_fault.pending field.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220524135624.22988-2-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A recurrent bug in the KVM/arm64 code base consists in trying to
access the timer pending state outside of the vcpu context, which
makes zero sense (the pending state only exists when the vcpu
is loaded).
In order to avoid more embarassing crashes and catch the offenders
red-handed, add a warning to kvm_arch_timer_get_input_level() and
return the state as non-pending. This avoids taking the system down,
and still helps tracking down silly bugs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220607131427.1164881-4-maz@kernel.org
|
|
Now that GICv2 has a proper userspace accessor for the pending state,
switch GICv3 over to it, dropping the local version, moving over the
specific behaviours that CGIv3 requires (such as the distinction
between pending latch and line level which were never enforced
with GICv2).
We also gain extra locking that isn't really necessary for userspace,
but that's a small price to pay for getting rid of superfluous code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20220607131427.1164881-3-maz@kernel.org
|
|
All gp or fixed counters have been reprogrammed using PERF_TYPE_RAW,
which means that the table that maps perf_hw_id to event select values is
no longer useful, at least for AMD.
For Intel, the logic to check if the pmu event reported by Intel cpuid is
not available is still required, in which case pmc_perf_hw_id() could be
renamed to hw_event_is_unavail() and a bool value is returned to replace
the semantics of "PERF_COUNT_HW_MAX+1".
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-12-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With the help of perf_get_hw_event_config(), KVM could query the correct
EVENTSEL_{EVENT, UMASK} pair of a kernel-generic hw event directly from
the different *_perfmon_event_map[] by the kernel's pre-defined perf_hw_id.
Also extend the bit range of the comparison field to
AMD64_RAW_EVENT_MASK_NB to prevent AMD from
defining EventSelect[11:8] into perfmon_event_map[] one day.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-11-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, we have [intel|knc|p4|p6]_perfmon_event_map on the Intel
platforms and amd_[f17h]_perfmon_event_map on the AMD platforms.
Early clumsy KVM code or other potential perf_event users may have
hard-coded these perfmon_maps (e.g., arch/x86/kvm/svm/pmu.c), so
it would not make sense to program a common hardware event based
on the generic "enum perf_hw_id" once the two tables do not match.
Let's provide an interface for callers outside the perf subsystem to get
the counter config based on the perfmon_event_map currently in use,
and it also helps to save bytes.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220518132512.37864-10-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The code sketch for reprogram_{gp, fixed}_counter() is similar, while the
fixed counter using the PERF_TYPE_HARDWAR type and the gp being
able to use either PERF_TYPE_HARDWAR or PERF_TYPE_RAW type
depending on the pmc->eventsel value.
After 'commit 761875634a5e ("KVM: x86/pmu: Setup pmc->eventsel
for fixed PMCs")', the pmc->eventsel of the fixed counter will also have
been setup with the same semantic value and will not be changed during
the guest runtime.
The original story of using the PERF_TYPE_HARDWARE type is to emulate
guest architecture PMU on a host without architecture PMU (the Pentium 4),
for which the guest vPMC needs to be reprogrammed using the kernel
generic perf_hw_id. But essentially, "the HARDWARE is just a convenience
wrapper over RAW IIRC", quoated from Peterz. So it could be pretty safe
to use the PERF_TYPE_RAW type only in practice to program both gp and
fixed counters naturally in the reprogram_counter().
To make the gp and fixed counters more semantically symmetrical,
the selection of EVENTSEL_{USER, OS, INT} bits is temporarily translated
via fixed_ctr_ctrl before the pmc_reprogram_counter() call.
Cc: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-9-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since reprogram_counter(), reprogram_{gp, fixed}_counter() currently have
the same incoming parameter "struct kvm_pmc *pmc", the callers can simplify
the conetxt by using uniformly exported interface, which makes reprogram_
{gp, fixed}_counter() static and eliminates EXPORT_SYMBOL_GPL.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-8-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since afrer reprogram_fixed_counter() is called, it's bound to assign
the requested fixed_ctr_ctrl to pmu->fixed_ctr_ctrl, this assignment step
can be moved forward (the stale value for diff is saved extra early),
thus simplifying the passing of parameters.
No functional change intended.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-7-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Because inside reprogram_gp_counter() it is bound to assign the requested
eventel to pmc->eventsel, this assignment step can be moved forward, thus
simplifying the passing of parameters to "struct kvm_pmc *pmc" only.
No functional change intended.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-6-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Passing the reference "struct kvm_pmc *pmc" when creating
pmc->perf_event is sufficient. This change helps to simplify the
calling convention by replacing reprogram_{gp, fixed}_counter()
with reprogram_counter() seamlessly.
No functional change intended.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-5-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
counters
Checking the kvm->arch.pmu_event_filter policy in both gp and fixed
code paths was somewhat redundant, so common parts can be extracted,
which reduces code footprint and improves readability.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <20220518132512.37864-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The obsolete comment could more accurately state that AMD platforms
have two base MSR addresses and two different maximum numbers
for gp counters, depending on the X86_FEATURE_PERFCTR_CORE feature.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518132512.37864-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Whenever an MSR is part of KVM_GET_MSR_INDEX_LIST, it has to be always
retrievable and settable with KVM_GET_MSR and KVM_SET_MSR. Accept
the PMU MSRs unconditionally in intel_is_valid_msr, if the access was
host-initiated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Whenever an MSR is part of KVM_GET_MSR_INDEX_LIST, as is the case
for MSR_IA32_DS_AREA, it has to be always settable with KVM_SET_MSR.
Accept a zero value for these MSRs to obey the contract.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MSR_CORE_PERF_GLOBAL_CTRL is introduced as part of Architecture PMU V2,
as indicated by Intel SDM 19.2.2 and the intel_is_valid_msr() function.
So in the absence of global_ctrl support, all PMCs are enabled as AMD does.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220509102204.62389-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Assigning a value to pmu->global_ctrl just to set the value of
pmu->global_ctrl_mask is more readable but does not conform to the
specification. The value is reset to zero on Power up and Reset but
stays unchanged on INIT, like most other MSRs.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220510044407.26445-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Defining a static const array in a header file would introduce redundant
definitions to the point of confusing semantics, and such a use case would
only bring complaints from the compiler:
arch/x86/kvm/pmu.h:20:32: warning: ‘vmx_icl_pebs_cpu’ defined but not used [-Wunused-const-variable=]
20 | static const struct x86_cpu_id vmx_icl_pebs_cpu[] = {
| ^~~~~~~~~~~~~~~~
Fixes: a095df2c5f48 ("KVM: x86/pmu: Adjust precise_ip to emulate Ice Lake guest PDIR counter")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix the following coccicheck warnings:
tools/testing/selftests/kvm/lib/s390x/ucall.c:25:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/x86_64/ucall.c:27:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/riscv/ucall.c:56:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:82:15-17: WARNING
opportunity for min()
tools/testing/selftests/kvm/lib/aarch64/ucall.c:55:20-21: WARNING
opportunity for min()
min() is defined in tools/include/linux/kernel.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20220511120621.36956-1-guozhengkui@vivo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The CPUID features PDCM, DS and DTES64 are required for PEBS feature.
KVM would expose CPUID feature PDCM, DS and DTES64 to guest when PEBS
is supported in the KVM on the Ice Lake server platforms.
Originally-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Co-developed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220411101946.20262-18-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For the same purpose, the leagcy intel_pmu_lbr_is_compatible() can be
renamed for reuse by more callers, and remove the comment about LBR
use case can be deleted by the way.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-17-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The information obtained from the interface perf_get_x86_pmu_capability()
doesn't change, so an exported "struct x86_pmu_capability" is introduced
for all guests in the KVM, and it's initialized before hardware_setup().
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220411101946.20262-16-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The guest PEBS will be disabled when some users try to perf KVM and
its user-space through the same PEBS facility OR when the host perf
doesn't schedule the guest PEBS counter in a one-to-one mapping manner
(neither of these are typical scenarios).
The PEBS records in the guest DS buffer are still accurate and the
above two restrictions will be checked before each vm-entry only if
guest PEBS is deemed to be enabled.
Suggested-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-Id: <20220411101946.20262-15-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
