| Age | Commit message (Collapse) | Author |
|---|
|
This change adds a 'type' attribute to routes, which can be parsed from
a RTM_NEWROUTE message. This will help to distinguish local vs. peer
routes in a future change.
This means userspace will need to set a correct rtm_type in RTM_NEWROUTE
and RTM_DELROUTE messages; we currently only accept RTN_UNICAST.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20210810023834.2231088-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.
Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, four reset types are supported for the HNS3 ethernet
driver: IMP reset, global reset, function reset, and FLR. Only
FLR can now be triggered by the user. To restore the device when
an exception occurs, add support for triggering reset by ethtool.
Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to
trigger the IMP | global | function reset manually.
In addition, VF can only trigger function reset.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm still going to continue looking after the Renesas Ethernet drivers and
device tree bindings. Now my new employer, Open Mobile Platform (OMP), will
pay for all my upstream work. Let's switch to my OMP email for the reviews.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9c212711-a0d7-39cd-7840-ff7abf938da1@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if BBR congestion control is initialized after more than 2B
packets have been delivered, depending on the phase of the
tp->delivered counter the tracking of BBR round trips can get stuck.
The bug arises because if tp->delivered is between 2^31 and 2^32 at
the time the BBR congestion control module is initialized, then the
initialization of bbr->next_rtt_delivered to 0 will cause the logic to
believe that the end of the round trip is still billions of packets in
the future. More specifically, the following check will fail
repeatedly:
!before(rs->prior_delivered, bbr->next_rtt_delivered)
and thus the connection will take up to 2B packets delivered before
that check will pass and the connection will set:
bbr->round_start = 1;
This could cause many mechanisms in BBR to fail to trigger, for
example bbr_check_full_bw_reached() would likely never exit STARTUP.
This bug is 5 years old and has not been observed, and as a practical
matter this would likely rarely trigger, since it would require
transferring at least 2B packets, or likely more than 3 terabytes of
data, before switching congestion control algorithms to BBR.
This patch is a stable candidate for kernels as far back as v4.9,
when tcp_bbr.c was added.
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jonathan Toppins says:
====================
bonding: cleanup header file and error msgs
Two small patches removing unreferenced symbols and unifying error
messages across netlink and printk.
====================
Link: https://lore.kernel.org/r/cover.1628650079.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There seems to be no reason to have different error messages between
netlink and printk. It also cleans up the function slightly.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All of the symbols either only exist in bond_options.c or nowhere at
all. These symbols were verified to not exist in the code base by
using `git grep` and their removal was verified by compiling bonding.ko.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drivers such as sja1105 and stmmac that call xpcs_create() expects an
error returned by the pcs-xpcs module, but this was not the case on
failed to allocate memory.
Fixed this by returning an -ENOMEM instead of a NULL pointer.
Fixes: 3ad1d171548e ("net: dsa: sja1105: migrate to xpcs for SGMII")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ocelot driver makes use of regmap, wrapping it with driver specific
operations that are thin wrappers around the core regmap APIs. These are
exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap
exports which is frowned upon. Add _GPL suffixes to at least the APIs that
are doing register I/O.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210810123748.47871-1-broonie@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed
that my Ethernet port to which a bond and a VLAN interface are attached
appeared to remain up after resuming from suspend with the cable unplugged
(and that problem still persists with 5.10-LTS).
It happens that the following happens:
- the network driver (e1000e here) prepares to suspend, calls e1000e_down()
which calls netif_carrier_off() to signal that the link is going down.
- netif_carrier_off() adds a link_watch event to the list of events for
this device
- the device is completely stopped.
- the machine suspends
- the cable is unplugged and the machine brought to another location
- the machine is resumed
- the queued linkwatch events are processed for the device
- the device doesn't yet have the __LINK_STATE_PRESENT bit and its events
are silently dropped
- the device is resumed with its link down
- the upper VLAN and bond interfaces are never notified that the link had
been turned down and remain up
- the only way to provoke a change is to physically connect the machine
to a port and possibly unplug it.
The state after resume looks like this:
$ ip -br li | egrep 'bond|eth'
bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP>
eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP>
eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP>
Placing an explicit call to netdev_state_change() either in the suspend
or the resume code in the NIC driver worked around this but the solution
is not satisfying.
The issue in fact really is in link_watch that loses events while it
ought not to. It happens that the test for the device being present was
added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice
being present to linkwatch_do_dev") in 4.20 to avoid an access to
devices that are not present.
Instead of dropping events, this patch proceeds slightly differently by
postponing their handling so that they happen after the device is fully
resumed.
Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev")
Link: https://lists.openwall.net/netdev/2018/03/15/62
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A recent change in LLVM causes module_{c,d}tor sections to appear when
CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings
because these are not handled anywhere:
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor'
ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor'
Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN
flag, so it is in a separate section even with -fno-function-sections
(default)".
Place them in the TEXT_TEXT section so that these technologies continue
to work with the newer compiler versions. All of the KASAN and KCSAN
KUnit tests continue to pass after this change.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1432
Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org
|
|
The desired behavior is to set the caller's filter count to thread's.
This value is reported via /proc, so this fixes the inaccurate count
exposed to userspace; it is not used for reference counting, etc.
Signed-off-by: Hsuan-Chi Kuo <hsuanchikuo@gmail.com>
Link: https://lore.kernel.org/r/20210304233708.420597-1-hsuanchikuo@gmail.com
Co-developed-by: Wiktor Garbacz <wiktorg@google.com>
Signed-off-by: Wiktor Garbacz <wiktorg@google.com>
Link: https://lore.kernel.org/lkml/20210810125158.329849-1-wiktorg@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
|
|
to replace printk(KERN_WARNING ...) with netdev_warn() kindly
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix the following smatch warning:
wait_func_handle_exec_timeout() warn: should '1 << ent->idx' be a 64 bit type?
Use 1ULL, to have a 64 bit type variable.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Subsequent patches make use of numa node affinity for memory
allocations. Initialize it for PCI PF, VF and SF devices.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently mlx5_core_dev contains array of capabilities. It contains 19
valid capabilities of the device, 2 reserved entries and 12 holes.
Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K
bytes of memory which is never used. Due to this mlx5_core_dev structure
size is 270Kbytes odd. This allocation further aligns to next power of 2
to 512Kbytes.
By skipping non-existent entries,
(a) 112Kbyte is saved,
(b) mlx5_core_dev reduces to 8KB with alignment
(c) 350KB saved in alignment
In future individual capability allocation can be used to skip its
allocation when such capability is disabled at the device level. This
patch prepares mlx5_core_dev to hold capability using a pointer instead
of inline array.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the current code, the current and maximal capabilities are
maintained in separate arrays which are both per type. In order to
allow the creation of such a basic structure as a dynamically
allocated array, we move curr and max fields to a unified
structure so that specific capabilities can be allocated as one unit.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use sysfs_emit() which is aware of PAGE_SIZE buffer.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, all access to mlx5 IRQs are done undere a lock. Hance, there
isn't a reason to have kref in struct mlx5_irq.
Switch it to integer.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When MSI-X vectors allocated are not enough for SFs to have dedicated,
MSI-X, kernel log buffer has too many entries.
Hence only enable such log with debug level.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5_irq structure have holes due to incorrect position of fields in it.
Make them naturally align.
pahole output after alignment:
struct mlx5_irq {
struct atomic_notifier_head nh; /* 0 72 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */
cpumask_var_t mask; /* 72 8 */
char name[32]; /* 80 32 */
struct mlx5_irq_pool * pool; /* 112 8 */
struct kref kref; /* 120 4 */
u32 index; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
int irqn; /* 128 4 */
/* size: 136, cachelines: 3, members: 7 */
/* padding: 4 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
New mlx5_core device structure is allocated through devlink_alloc
with\ kzalloc and that ensures that all fields are equal to zero
and it includes ->state too.
That means that checks of that field in the mlx5_init_one() is
completely redundant, because that function is called only once
in the begging of mlx5_core_dev lifetime.
PCI:
.probe()
-> probe_one()
-> mlx5_init_one()
The recovery flow can't run at that time or before it, because relevant
work initialized later in mlx5_init_once().
Such initialization flow ensures that dev->state can't be
MLX5_DEVICE_STATE_UNINITIALIZED at all, so remove such impossible
checks.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix typo of the cited commit that calls to mlx5_create_ttc_table, instead
of mlx5_create_inner_ttc_table.
Fixes: f4b45940e9b9 ("net/mlx5: Embed mlx5_ttc_table")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix typo:
*vectores ==> vectors
*realeased ==> released
*erros ==> errors
*namepsace ==> namespace
*trafic ==> traffic
*proccessed ==> processed
*retore ==> restore
*Currenlty ==> Currently
*crated ==> created
*chane ==> change
*cannnot ==> cannot
*usuallly ==> usually
*failes ==> fails
*importent ==> important
*reenabled ==> re-enabled
*alocation ==> allocation
*recived ==> received
*tanslation ==> translation
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Vladimir Oltean says:
====================
DSA tagger helpers
The goal of this series is to minimize the use of memmove and skb->data
in the DSA tagging protocol drivers. Unfiltered access to this level of
information is not very friendly to drive-by contributors, and sometimes
is also not the easiest to review.
For starters, I have converted the most common form of DSA tagging
protocols: the DSA headers which are placed where the EtherType is.
The helper functions introduced by this series are:
- dsa_alloc_etype_header
- dsa_strip_etype_header
- dsa_etype_header_pos_rx
- dsa_etype_header_pos_tx
This series is just a resend as non-RFC of v1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a similar helper for locating the offset to the DSA header
relative to skb->data, and make the existing EtherType header taggers to
use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems that protocol tagging driver writers are always surprised about
the formula they use to reach their EtherType header on RX, which
becomes apparent from the fact that there are comments in multiple
drivers that mention the same information.
Create a helper that returns a void pointer to skb->data - 2, as well as
centralize the explanation why that is the case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hide away the memmove used by DSA EtherType header taggers to shift the
MAC SA and DA to the left to make room for the header, after they've
called skb_push(). The call to skb_push() is still left explicit in
drivers, to be symmetric with dsa_strip_etype_header, and because not
all callers can be refactored to do it (for example, brcm_tag_xmit_ll
has common code for a pre-Ethernet DSA tag and an EtherType DSA tag).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All header taggers open-code a memmove that is fairly not all that
obvious, and we can hide the details behind a helper function, since the
only thing specific to the driver is the length of the header tag.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Parav Pandit says:
====================
devlink: Control auxiliary devices
Currently, for mlx5 multi-function device, a user is not able to control
which functionality to enable/disable. For example, each PCI
PF, VF, SF function by default has netdevice, RDMA and vdpa-net
devices always enabled.
Hence, enable user to control which device functionality to enable/disable.
This is achieved by using existing devlink params [1] to
enable/disable eth, rdma and vdpa net functionality control knob.
For example user interested in only vdpa device function: performs,
$ devlink dev param set pci/0000:06:00.0 name enable_rdma value false \
cmode driverinit
$ devlink dev param set pci/0000:06:00.0 name enable_eth value false \
cmode driverinit
$ devlink dev param set pci/0000:06:00.0 name enable_vnet value true \
cmode driverinit
$ devlink dev reload pci/0000:06:00.0
Reload command honors parameters set, initializes the device that user
has composed using devlink dev params and resources.
Devices before reload:
mlx5_core.sf.4
(subfunction device)
/\
/| \
/ | \
/ | \
mlx5_core.eth.4 | mlx5_core.rdma.4
(SF eth aux dev) | (SF rdma aux dev)
| | |
| | |
enp6s0f0s88 | mlx5_0
(SF netdev) | (SF rdma device)
|
mlx5_core.vnet.4
(SF vnet aux dev)
|
|
auxiliary/mlx5_core.sf.4
(vdpa net mgmt device)
Above example reconfigures the device with only VDPA functionality.
Devices after reload:
mlx5_core.sf.4
(subfunction device)
/\
/ \
/ \
/ \
mlx5_core.vnet.4 no eth, no rdma aux devices
(SF vnet aux dev)
Above parameters enable user to compose the device as needed based
on the use case.
Since devlink params are done on the devlink instance, these
knobs are uniformly usable for PCI PF, VF and SF devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable user to disable VDPA net auxiliary device so that when it is not
required, user can disable it.
For example,
$ devlink dev param set pci/0000:06:00.0 \
name enable_vnet value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device
mlx5_core.vnet.2 for the VDPA net functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable user to disable RDMA auxiliary device so that when it is not
required, user can disable it.
For example,
$ devlink dev param set pci/0000:06:00.0 \
name enable_rdma value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device
mlx5_core.rdma.2 for the RDMA functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable user to disable Ethernet auxiliary device so that when it is not
required, user can disable it.
For example,
$ devlink dev param set pci/0000:06:00.0 \
name enable_eth value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create mlx5_core.eth.2 auxiliary
device for the Ethernet functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cleanup routine missed to unpublish the parameters. Add it.
Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable drivers to publish/unpublish individual parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently device configuration parameters can be registered as an array.
Due to this a constant array must be registered. A single driver
supporting multiple devices each with different device capabilities end
up registering all parameters even if it doesn't support it.
One possible workaround a driver can do is, it registers multiple single
entry arrays to overcome such limitation.
Better is to provide a API that enables driver to register/unregister a
single parameter. This also further helps in two ways.
(1) to reduce the memory of devlink_param_entry by avoiding in registering
parameters which are not supported by the device.
(2) avoid generating multiple parameter add, delete, publish, unpublish,
init value notifications for such unsupported parameters
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create and use a helper function for one parameter registration.
Subsequent patch also will reuse this for driver facing routine to
register a single parameter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new device generic parameter to enable/disable creation of
VDPA net auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_vnet value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
VDPA net functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new device generic parameter to enable/disable creation of
RDMA auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_rdma value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
RDMA functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new device generic parameter to enable/disable creation of
Ethernet auxiliary device and associated device functionality
in the devlink instance.
User who prefers to disable such functionality can disable it using below
example.
$ devlink dev param set pci/0000:06:00.0 \
name enable_eth value false cmode driverinit
$ devlink dev reload pci/0000:06:00.0
At this point devlink instance do not create auxiliary device for the
Ethernet functionality.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: vlan: add global mcast options
This is the first follow-up set after the support for per-vlan multicast
contexts which extends global vlan options to support bridge's multicast
config per-vlan, it enables user-space to change and dump the already
existing bridge vlan multicast context options. The global option patches
(01 - 09 and 12-13) follow a similar pattern of changing current mcast
functions to take multicast context instead of a port/bridge directly.
Option equality checks have been added for dumping vlan range compression.
The last 2 patches extend the mcast router dump support so it can be
re-used when dumping vlan config.
patches 01 - 09: add support for various mcast options
patches 10 - 11: prepare for per-vlan querier control
patches 12 - 13: add support for querier control and router control
patches 14 - 15: add support for dumping per-vlan router ports
Next patch-sets:
- per-port/vlan router option config
- iproute2 support for all new vlan options
- selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Embed the standard multicast router port export by br_rports_fill_info()
into a new global vlan attribute BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS.
In order to have the same format for the global bridge mcast context and
the per-vlan mcast context we need a double-nesting:
- BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS
- MDBA_ROUTER
Currently we don't compare router lists, if any router port exists in
the bridge mcast contexts we consider their option sets as different and
export them separately.
In addition we export the router port vlan id when dumping similar to
the router port notification format.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we are dumping the router ports of a vlan mcast context we need to
use the bridge/vlan and port/vlan's multicast contexts to check if
IPv4/IPv6 router port is present and later to dump the vlan id.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to change and retrieve global vlan multicast router state
which is used for the bridge itself. We just need to pass multicast context
to br_multicast_set_router instead of bridge device and the rest of the
logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to change and retrieve global vlan multicast querier state.
We just need to pass multicast context to br_multicast_set_querier
instead of bridge device and the rest of the logic remains the same.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is a minor optimization and better behaviour to make sure querier and
query sending routines affect only the matching multicast context
depending if vlan snooping is enabled (vlan ctx vs bridge ctx).
It also avoids sending unnecessary extra query packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to have the querier state per multicast context in order to have
per-vlan control, so remove the internal option bit and move it to the
multicast context. Also annotate the lockless reads of the new variable.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to change and retrieve global vlan multicast startup query
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to change and retrieve global vlan multicast query response
interval option.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
