summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-02cxgb4: make the array match_all_mac static, makes object smallerColin Ian King
Don't populate the array match_all_mac on the stack but instead it static const. Makes the object code smaller by 75 bytes. Before: text data bss dec hex filename 46701 8960 64 55725 d9ad ../chelsio/cxgb4/cxgb4_filter.o After: text data bss dec hex filename 46338 9120 192 55650 d962 ../chelsio/cxgb4/cxgb4_filter.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801151205.145924-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB ↵Vladimir Oltean
entry Currently it is possible to add broken extern_learn FDB entries to the bridge in two ways: 1. Entries pointing towards the bridge device that are not local/permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static 2. Entries pointing towards the bridge device or towards a port that are marked as local/permanent, however the bridge does not process the 'permanent' bit in any way, therefore they are recorded as though they aren't permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent Since commit 52e4bec15546 ("net: bridge: switchdev: treat local FDBs the same as entries towards the bridge"), these incorrect FDB entries can even trigger NULL pointer dereferences inside the kernel. This is because that commit made the assumption that all FDB entries that are not local/permanent have a valid destination port. For context, local / permanent FDB entries either have fdb->dst == NULL, and these point towards the bridge device and are therefore local and not to be used for forwarding, or have fdb->dst == a net_bridge_port structure (but are to be treated in the same way, i.e. not for forwarding). That assumption _is_ correct as long as things are working correctly in the bridge driver, i.e. we cannot logically have fdb->dst == NULL under any circumstance for FDB entries that are not local. However, the extern_learn code path where FDB entries are managed by a user space controller show that it is possible for the bridge kernel driver to misinterpret the NUD flags of an entry transmitted by user space, and end up having fdb->dst == NULL while not being a local entry. This is invalid and should be rejected. Before, the two commands listed above both crashed the kernel in this check from br_switchdev_fdb_notify: struct net_device *dev = info.is_local ? br->dev : dst->dev; info.is_local == false, dst == NULL. After this patch, the invalid entry added by the first command is rejected: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0 Error: bridge: FDB entry towards bridge must be permanent. and the valid entry added by the second command is properly treated as a local address and does not crash br_switchdev_fdb_notify anymore: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0 Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02ipv4: Fix refcount warning for new fib_infoDavid Ahern
Ioana reported a refcount warning when booting over NFS: [ 5.042532] ------------[ cut here ]------------ [ 5.047184] refcount_t: addition on 0; use-after-free. [ 5.052324] WARNING: CPU: 7 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xa4/0x150 ... [ 5.167201] Call trace: [ 5.169635] refcount_warn_saturate+0xa4/0x150 [ 5.174067] fib_create_info+0xc00/0xc90 [ 5.177982] fib_table_insert+0x8c/0x620 [ 5.181893] fib_magic.isra.0+0x110/0x11c [ 5.185891] fib_add_ifaddr+0xb8/0x190 [ 5.189629] fib_inetaddr_event+0x8c/0x140 fib_treeref needs to be set after kzalloc. The old code had a ++ which led to the confusion when the int was replaced by a refcount_t. Fixes: 79976892f7ea ("net: convert fib_treeref from int to refcount_t") Signed-off-by: David Ahern <dsahern@kernel.org> Reported-by: Ioana Ciornei <ciorneiioana@gmail.com> Cc: Yajun Deng <yajun.deng@linux.dev> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20210802160221.27263-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02drm/vmwgfx: Fix a 64bit regression on svga3Zack Rusin
Register accesses are always 4bytes, accidently this was changed to a void pointer whwqich badly breaks 64bit archs when running on top of svga3. Fixes: 2cd80dbd3551 ("drm/vmwgfx: Add basic support for SVGA3") Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210615182336.995192-3-zackr@vmware.com (cherry picked from commit 87360168759879d68550b0c052bbcc2a0339ff74) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-08-02net: phy: mscc: make some arrays static const, makes object smallerColin Ian King
Don't populate arrays on the stack but instead them static const. Makes the object code smaller by 280 bytes. Before: text data bss dec hex filename 24142 4368 192 28702 701e ./drivers/net/phy/mscc/mscc_ptp.o After: text data bss dec hex filename 23830 4400 192 28422 6f06 ./drivers/net/phy/mscc/mscc_ptp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801070155.139057-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02netdevsim: make array res_ids static const, makes object smallerColin Ian King
Don't populate the array res_ids on the stack but instead it static const. Makes the object code smaller by 14 bytes. Before: text data bss dec hex filename 50833 8314 256 59403 e80b ./drivers/net/netdevsim/fib.o After: text data bss dec hex filename 50755 8378 256 59389 e7fd ./drivers/net/netdevsim/fib.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801065328.138906-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02Merge tag 'fpga-fixes-for-5.14' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus Moritz writes: FPGA Manager fix for 5.14 Kajol's fix adds a missing pmu_migrate_context() call which presents a problem if the CPU collecting FME PMU data is taken offline. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my fixes branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: fme: Fix cpu hotplug issue in performance reporting
2021-08-02RDMA/rxe: Restore setting tot_len in the IPv4 headerBob Pearson
An earlier patch removed setting of tot_len in IPv4 headers because it was also set in ip_local_out. However, this change resulted in an incorrect ICRC being computed because the tot_len field is not masked out. This patch restores that line. This fixes the bug reported by Zhu Yanjun. This bug affects anyone using rxe which is currently broken. Fixes: 230bb836ee88 ("RDMA/rxe: Fix redundant call to ip_send_check") Link: https://lore.kernel.org/r/20210729220039.18549-3-rpearsonhpe@gmail.com Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Reviewed-and-tested-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02RDMA/rxe: Use the correct size of wqe when processing SRQBob Pearson
The memcpy() that copies a WQE from a SRQ the QP uses an incorrect size. The size should have been the size of the rxe_send_wqe struct not the size of a pointer to it. The result is that IO operations using a SRQ on the responder side will fail. Fixes: ec0fa2445c18 ("RDMA/rxe: Fix over copying in get_srq_wqe") Link: https://lore.kernel.org/r/20210729220039.18549-2-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02RDMA/cma: Revert INIT-INIT patchMike Marciniszyn
The net/sunrpc/xprtrdma module creates its QP using rdma_create_qp() and immediately post receives, implicitly assuming the QP is in the INIT state and thus valid for ib_post_recv(). The patch noted in Fixes: removed the RESET->INIT modifiy from rdma_create_qp(), breaking NFS rdma for verbs providers that fail the ib_post_recv() for a bad state. This situation was proven using kprobes in rvt_post_recv() and rvt_modify_qp(). The traces showed that the rvt_post_recv() failed before ANY modify QP and that the current state was RESET. Fix by reverting the patch below. Fixes: dc70f7c3ed34 ("RDMA/cma: Remove unnecessary INIT->INIT transition") Link: https://lore.kernel.org/r/1627583182-81330-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Cc: Haakon Bugge <haakon.bugge@oracle.com> Cc: Chuck Lever III <chuck.lever@oracle.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recentlyAharon Landau
Fixing a typo that causes a cache entry to shrink immediately after adding to it new MRs if the entry size exceeds the high limit. In doing so, the cache misses its purpose to prevent the creation of new mkeys on the runtime by using the cached ones. Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue") Link: https://lore.kernel.org/r/fcb546986be346684a016f5ca23a0567399145fa.1627370131.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02gpio: tqmx86: really make IRQ optionalMatthias Schiffer
The tqmx86 MFD driver was passing IRQ 0 for "no IRQ" in the past. This causes warnings with newer kernels. Prepare the gpio-tqmx86 driver for the fixed MFD driver by handling a missing IRQ properly. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-08-02Revert "mhi: Fix networking tree build."Jakub Kicinski
This reverts commit 40e159403896f7d55c98f858d0b20fee1d941fa4. Looks like this commit breaks the build for me. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02net/ipv4: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Use an anonymous union with a couple of anonymous structs in order to keep userspace unchanged: $ pahole -C ip_msfilter net/ipv4/ip_sockglue.o struct ip_msfilter { union { struct { __be32 imsf_multiaddr_aux; /* 0 4 */ __be32 imsf_interface_aux; /* 4 4 */ __u32 imsf_fmode_aux; /* 8 4 */ __u32 imsf_numsrc_aux; /* 12 4 */ __be32 imsf_slist[1]; /* 16 4 */ }; /* 0 20 */ struct { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 0 16 */ }; /* 0 20 */ /* size: 20, cachelines: 1, members: 1 */ /* last cacheline: 20 bytes */ }; Also, refactor the code accordingly and make use of the struct_size() and flex_array_size() helpers. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02docs: operstates: document IF_OPER_TESTINGJakub Kicinski
IF_OPER_TESTING is in fact used today. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02docs: operstates: fix typoJakub Kicinski
TVL -> TLV Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: sparx5: fix compiletime_assert for GCC 4.9Jakub Kicinski
Stephen reports sparx5 broke GCC 4.9 build. Move the compiletime_assert() out of the static function. Compile-tested only, no object code changes. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: remove the struct packet_type argument from dsa_device_ops::rcv()Vladimir Oltean
No tagging driver uses this. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02nfc: hci: pass callback data param as pointer in nci_request()Krzysztof Kozlowski
The nci_request() receives a callback function and unsigned long data argument "opt" which is passed to the callback. Almost all of the nci_request() callers pass pointer to a stack variable as data argument. Only few pass scalar value (e.g. u8). All such callbacks do not modify passed data argument and in previous commit they were made as const. However passing pointers via unsigned long removes the const annotation. The callback could simply cast unsigned long to a pointer to writeable memory. Use "const void *" as type of this "opt" argument to solve this and prevent modifying the pointed contents. This is also consistent with generic pattern of passing data arguments - via "void *". In few places which pass scalar values, use casts via "unsigned long" to suppress any warnings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02cavium: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: natsemi: Fix missing pci_disable_device() in probe and removeWang Hai
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: phy: micrel: Fix detection of ksz87xx switchSteve Bennett
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: mt7530: drop paranoid checks in .get_tag_protocol()Vladimir Oltean
It is desirable to reduce the surface of DSA_TAG_PROTO_NONE as much as we can, because we now have options for switches without hardware support for DSA tagging, and the occurrence in the mt7530 driver is in fact quite gratuitout and easy to remove. Since ds->ops->get_tag_protocol() is only called for CPU ports, the checks for a CPU port in mtk_get_tag_protocol() are redundant and can be removed. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02selinux: correct the return value when loads initial sidsXiu Jianfeng
It should not return 0 when SID 0 is assigned to isids. This patch fixes it. Cc: stable@vger.kernel.org Fixes: e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> [PM: remove changelog from description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-08-02Merge branch 'sja1105-fdb-fixes'David S. Miller
Vladimir Oltean says: ==================== FDB fixes for NXP SJA1105 I have some upcoming patches that make heavy use of statically installed FDB entries, and when testing them on SJA1105P/Q/R/S and SJA1110, it became clear that these switches do not behave reliably at all. - On SJA1110, a static FDB entry cannot be installed at all - On SJA1105P/Q/R/S, it is very picky about the inner/outer VLAN type - Dynamically learned entries will make us not install static ones, or even if we do, they might not take effect Patch 5/6 has a conflict with net-next (sorry), the commit message of that patch describes how to deal with it. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tagVladimir Oltean
On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a maskable "inner/outer tag" bit which means: - when set to 1: match single-outer and double tagged frames - when set to 0: match untagged and single-inner tagged frames - when masked off: match all frames regardless of the type of tag This driver does not make any meaningful distinction between inner tags (matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN table entries are installed as SJA1110_VLAN_D_TAG, which means that they match on both inner and outer tags. So it does not make sense that we install FDB entries with the IOTAG bit set to 1. In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the switch will see frames as outer-tagged or double-tagged (never inner). So the FDB entries will match if IOTAG is set to 1. In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the switch will see untagged and 802.1Q-tagged packets as inner-tagged, and 802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged packets will not match FDB entries if IOTAG is set to 1, but 802.1ad tagged packets will. Strange. To fix this, simply mask off the IOTAG bit from FDB entries, and make them match regardless of whether the VLAN tag is inner or outer. Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 tooVladimir Oltean
Similar but not quite the same with what was done in commit b11f0a4c0c81 ("net: dsa: sja1105: be stateless when installing FDB entries") for SJA1105E/T, it is desirable to drop the priv->vlan_aware check and simply go ahead and install FDB entries in the VLAN that was given by the bridge. As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a maskable TCAM, and we are installing VLAN-unaware FDB entries with the VLAN ID masked off. However, such FDB entries might completely obscure VLAN-aware entries where the VLAN ID is included in the search mask, because the switch looks up the FDB from left to right and picks the first entry which results in a masked match. So it depends on whether the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries. Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS and a VLAN-aware one towards other set of DESTPORTS, the result is that the packets in VLAN-aware mode will be forwarded towards the DESTPORTS specified by the VLAN-unaware entry. To solve this, simply do not use the masked matching ability of the FDB for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we configure the switch for shared VLAN learning, so the VLAN ID will be ignored anyway during lookup, so it is redundant to mask it off in the TCAM. This patch conflicts with net-next commit 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") which changed this line: if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { into: if (priv->vlan_aware) { When merging with net-next, the lines added by this patch should take precedence in the conflict resolution (i.e. the "if" condition should be deleted in both cases). Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a ↵Vladimir Oltean
new address Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6 MDB entry such as 33:33:00:00:00:6a, the search for that address will return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00. It returns that entry because, well, it matches, in the sense that unknown multicast is supposed by design to match it... But the issue is that we then proceed to overwrite this entry with the one for our precise host-joined multicast address, and the unknown multicast entry is no longer there - unknown multicast is now flooded to the same group of ports as broadcast, which does not look up the FDB. To solve this problem, we should ignore searches that return the unknown multicast address as the match, and treat them as "no match" which will result in the entry being installed to hardware. For this to work properly, we need to put the result of the FDB search in a temporary variable in order to avoid overwriting the l2_lookup entry we want to program. The l2_lookup entry returned by the search might not have the same set of DESTPORTS and not even the same MACADDR as the entry we're trying to add. Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with ↵Vladimir Oltean
statically added ones The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: overwrite dynamic FDB entries with static ones in ↵Vladimir Oltean
.port_fdb_add The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: fix static FDB writes for SJA1110Vladimir Oltean
The blamed commit made FDB access on SJA1110 functional only as far as dumping the existing entries goes, but anything having to do with an entry's index (adding, deleting) is still broken. There are in fact 2 problems, all caused by improperly inheriting the code from SJA1105P/Q/R/S: - An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes - The "index" field within an FDB entry is at bits 10:1 for SJA1110 and not 15:6 as in SJA1105P/Q/R/S This patch moves the packing function for the cmd->index outside of sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific functions sja1105pqrs_l2_lookup_cmd_packing and sja1110_l2_lookup_cmd_packing. Fixes: 74e7feff0e22 ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02Merge tag 'mvebu-fixes-5.14-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.14 (part 1) - Fix i2c property for armada-3720-turris-mox in order to use SFP - Add mmc alias on armada-3720-turris-mox to allow rootfs using the right mmc * tag 'mvebu-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers Link: https://lore.kernel.org/r/87k0l7zx4v.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'stm32-dt-for-v5.14-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.14, round 1 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Set HW RTC ad default RTC - Disable EDPD LAN8710 feature as it is not a stable feature. - Fix touchscreen IRQ line assignment * tag 'stm32-dt-for-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM Link: https://lore.kernel.org/r/c0b6031b-2de7-2ef8-71b2-a0af8f475932@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'tee-kexec-fixes-for-v5.14' of ↵Arnd Bergmann
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes tee: Improve support for kexec and kdump This fixes several bugs uncovered while exercising the OP-TEE, ftpm (firmware TPM), and tee_bnxt_fw (Broadcom BNXT firmware manager) drivers with kexec and kdump (emergency kexec) based workflows. * tag 'tee-kexec-fixes-for-v5.14' of git://git.linaro.org:/people/jens.wiklander/linux-tee: firmware: tee_bnxt: Release TEE shm, session, and context during kexec tpm_ftpm_tee: Free and unregister TEE shared memory during kexec tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag tee: add tee_shm_alloc_kernel_buf() optee: Clear stale cache entries during initialization optee: fix tee out of memory failure seen during kexec reboot optee: Refuse to load the driver under the kdump kernel optee: Fix memory leak when failing to register shm pages Link: https://lore.kernel.org/r/20210726081039.GA2482361@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'imx-fixes-5.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.14: - A couple of fixes on MMDC driver to add missing iounmap() and clk_disable_unprepare(), and a follow-up fix. - Fix missing-prototypes warning in SRC driver. - Revert commit 7d981405d0fd ("soc: imx8m: change to use platform driver"), which breaks i.MX8M system that has CAAM driver enabled. - One fix on imx53-m53menlo pinctrl configuration. - Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent issues where the PHY would be unresponsive every once in a while. - Add missing flag for in-band signalling between PHY and MAC on kontron-sl28-var2 board to fix network support. - Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless noise issue. - Fix sysclk node name for LS1028A so that U-Boot is able to update the "clock-frequency" property. * tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz arm64: dts: ls1028: sl28: fix networking for variant 2 Revert "soc: imx8m: change to use platform driver" ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms ARM: imx: common: Move prototype outside the SMP block ARM: imx: add missing clk_disable_unprepare() ARM: imx: add missing iounmap() arm64: dts: ls1028a: fix node name for the sysclk Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: ixp4xx: goramo_mlr depends on old PCI driverArnd Bergmann
When this driver is disabled, the board file fails to build, so add a dependency: arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit': arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration] 472 | ixp4xx_pci_preinit(); | ^~~~~~~~~~~~~~~~~~ | iop3xx_pci_preinit arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit': arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration] 481 | if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { | ^~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function) 231 | .start = IXP4XX_UART1_BASE_PHYS, | ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init': arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration] 376 | ixp4xx_sys_init(); | ^~~~~~~~~~~~~~~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: soc@kernel.org Link: https://lore.kernel.org/r/20210721151620.2373500-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: ixp4xx: fix compile-testing soc driversArnd Bergmann
Randconfig builds on the ixp4xx ethernet driver showed that the qmgr and npe drivers are not actually built even when compile testing is enabled: ERROR: modpost: "qmgr_stat_empty" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_enable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_set_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "__qmgr_request_queue" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_send_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_load_firmware" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_running" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_disable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_stat_below_low_watermark" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! Fix it by always entering the drivers/soc/ixp4xx/ directory, and fix the resulting compile test failures by removing the #include statements that prevent building on most other platforms. Fixes: 7a6c9dbb36a4 ("soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST") Fixes: fcf2d8978cd5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210721211412.3537004-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02soc/tegra: Make regulator couplers depend on CONFIG_REGULATORDmitry Osipenko
The regulator coupler drivers now use regulator-driver API function that isn't available during compile-testing. Make regulator coupler drivers dependent on CONFIG_REGULATOR in Kconfig. Fixes: 03978d42ed0d ("soc/tegra: regulators: Bump voltages on system reboot") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'tegra-for-5.14-rc3-arm64-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.14-rc3 This contains one more fix for SMMU enablement on Tegra194, this time for PCIe. * tag 'tegra-for-5.14-rc3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable SMMU support for PCIe on Tegra194 Link: https://lore.kernel.org/r/20210716233858.10096-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: dts: nomadik: Fix up interrupt controller node namesSudeep Holla
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02mhi: Fix networking tree build.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02spi: mediatek: Fix fifo transferGuenter Roeck
Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@ph-home.de> Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Tzung-Bi Shih <tzungbi@google.com> Cc: Hsin-Yi Wang <hsinyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02ASoC: amd: Fix reference to PCM buffer addressTakashi Iwai
PCM buffers might be allocated dynamically when the buffer preallocation failed or a larger buffer is requested, and it's not guaranteed that substream->dma_buffer points to the actually used buffer. The driver needs to refer to substream->runtime->dma_addr instead for the buffer address. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210731084331.32225-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02net/sched: taprio: Fix init procedureYannick Vignon
Commit 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping") resulted in duplicate entries in the qdisc hash. While this did not impact the overall operation of the qdisc and taprio code paths, it did result in an infinite loop when dumping the qdisc properties, at least on one target (NXP LS1028 ARDB). Removing the duplicate call to qdisc_hash_add() solves the problem. Fixes: 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02Merge branch 'octeon-drr-config'David S. Miller
Sunil Goutham says: ==================== cn10k: DWRR MTU and weights configuration On OcteonTx2 DWRR quantum is directly configured into each of the transmit scheduler queues. And PF/VF drivers were free to config any value upto 2^24. On CN10K, HW is modified, the quantum configuration at scheduler queues is in terms of weight. And SW needs to setup a base DWRR MTU at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do 'DWRR MTU * weight' to get the quantum. This patch series addresses this HW change on CN10K silicons, both admin function and PF/VF drivers are modified. Also added support to program DWRR MTU via devlink params. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02octeontx2-pf: cn10k: Config DWRR weight based on MTUSunil Goutham
Program SQ, MDQ, TL4 to TL2 transmit scheduler queues' DWRR weight based on DWRR MTU programmed at NIX_AF_DWRR_RPM_MTU. The DWRR MTU from admin function is retrieved via mbox. On OcteaonTx2 silicon, admin function driver responds with DWRR MTU as '1'. This helps to avoid silicon specific transmit scheduler DWRR quantum/weight configuration logic. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02octeontx2-af: cn10k: DWRR MTU configurationSunil Goutham
On OcteonTx2 DWRR quantum is directly configured into each of the transmit scheduler queues. And PF/VF drivers were free to config any value upto 2^24. On CN10K, HW is modified, the quantum configuration at scheduler queues is in terms of weight. And SW needs to setup a base DWRR MTU at NIX_AF_DWRR_RPM_MTU / NIX_AF_DWRR_SDP_MTU. HW will do 'DWRR MTU * weight' to get the quantum. For LBK traffic, value programmed into NIX_AF_DWRR_RPM_MTU register is considered as DWRR MTU. This patch programs a default DWRR MTU of 8192 into HW and also provides a way to change this via devlink params. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02netfilter: ebtables: do not hook tables by defaultFlorian Westphal
If any of these modules is loaded, hooks get registered in all netns: Before: 'unshare -n nft list hooks' shows: family bridge hook prerouting { -2147483648 ebt_broute -0000000300 ebt_nat_hook } family bridge hook input { -0000000200 ebt_filter_hook } family bridge hook forward { -0000000200 ebt_filter_hook } family bridge hook output { +0000000100 ebt_nat_hook +0000000200 ebt_filter_hook } family bridge hook postrouting { +0000000300 ebt_nat_hook } This adds 'template 'tables' for ebtables. Each ebtable_foo registers the table as a template, with an init function that gets called once the first get/setsockopt call is made. ebtables core then searches the (per netns) list of tables. If no table is found, it searches the list of templates instead. If a template entry exists, the init function is called which will enable the table and register the hooks (so packets are diverted to the table). If no entry is found in the template list, request_module is called. After this, hook registration is delayed until the 'ebtables' (set/getsockopt) request is made for a given table and will only happen in the specific namespace. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-02selftests/net: remove min gso test in packet_sndDust Li
This patch removed the 'raw gso min size - 1' test which always fails now: ./in_netns.sh ./psock_snd -v -c -g -l "${mss}" raw gso min size - 1 (expected to fail) tx: 1524 rx: 1472 OK After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user"), we relaxed the min gso_size check in virtio_net_hdr_to_skb(). So when a packet which is smaller then the gso_size, GSO for this packet will not be set, the packet will be send/recv successfully. Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02bonding: 3ad: fix the concurrency between __bond_release_one() and ↵Yufeng Mo
bond_3ad_state_machine_handler() Some time ago, I reported a calltrace issue "did not find a suitable aggregator", please see[1]. After a period of analysis and reproduction, I find that this problem is caused by concurrency. Before the problem occurs, the bond structure is like follows: bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1 \ port0 \ slaver1(eth1) - agg1.lag_ports -> NULL \ port1 If we run 'ifenslave bond0 -d eth1', the process is like below: excuting __bond_release_one() | bond_upper_dev_unlink()[step1] | | | | | bond_3ad_lacpdu_recv() | | ->bond_3ad_rx_indication() | | spin_lock_bh() | | ->ad_rx_machine() | | ->__record_pdu()[step2] | | spin_unlock_bh() | | | | bond_3ad_state_machine_handler() | spin_lock_bh() | ->ad_port_selection_logic() | ->try to find free aggregator[step3] | ->try to find suitable aggregator[step4] | ->did not find a suitable aggregator[step5] | spin_unlock_bh() | | | | bond_3ad_unbind_slave() | spin_lock_bh() spin_unlock_bh() step1: already removed slaver1(eth1) from list, but port1 remains step2: receive a lacpdu and update port0 step3: port0 will be removed from agg0.lag_ports. The struct is "agg0.lag_ports -> port1" now, and agg0 is not free. At the same time, slaver1/agg1 has been removed from the list by step1. So we can't find a free aggregator now. step4: can't find suitable aggregator because of step2 step5: cause a calltrace since port->aggregator is NULL To solve this concurrency problem, put bond_upper_dev_unlink() after bond_3ad_unbind_slave(). In this way, we can invalid the port first and skip this port in bond_3ad_state_machine_handler(). This eliminates the situation that the slaver has been removed from the list but the port is still valid. [1]https://lore.kernel.org/netdev/10374.1611947473@famine/ Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 08:58:44 +0000