| Age | Commit message (Collapse) | Author |
|---|
|
The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb
("firmware loader: Fix _request_firmware_load() return val for fw load
abort") was to distinguish the error from -ENOMEM, and so there is no
real reason in keeping it. -EAGAIN is typically used to tell the
userspace to try something again and in this case re-using the sysfs
loading interface cannot be retried when a timeout happens, so the
return value is also bogus.
-ETIMEDOUT is received when the wait times out and returning that
is much more telling of what the reason for the failure was. So, just
propagate that instead of returning -EAGAIN.
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210728085107.4141-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix uart corruption issue when rx power off.
Add spin lock in mtk8250_dma_rx_complete function in APDMA mode.
when uart is used as a communication port with external device(GPS).
when external device(GPS) power off, the power of rx pin is also from
1.8v to 0v. Even if there is not any data in rx. But uart rx pin can
capture the data "0".
If uart don't receive any data in specified cycle, uart will generates
BI(Break interrupt) interrupt.
If external device(GPS) power off, we found that BI interrupt appeared
continuously and very frequently.
When uart interrupt type is BI, uart IRQ handler(8250 framwork
API:serial8250_handle_irq) will push data to tty buffer.
mtk8250_dma_rx_complete is a task of mtk_uart_apdma_rx_handler.
mtk8250_dma_rx_complete priority is lower than uart irq
handler(serial8250_handle_irq).
if we are in process of mtk8250_dma_rx_complete, uart appear BI
interrupt:1)serial8250_handle_irq will priority execution.2)it may cause
write tty buffer conflict in mtk8250_dma_rx_complete.
So the spin lock protect the rx receive data process is not break.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210729084640.17613-2-zhiyong.tao@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch e60c2991f18b make the lpuart32_get_mctrl always return 0, actually
this will break the functions of device which use flow control such as
Bluetooth.
For lpuart32 plaform, the hardware can handle the CTS automatically.
So we should set TIOCM_CTS active. Also need to set CAR and DSR active.
Patch has been tested on lpuart32 platforms such as imx8qm and imx8ulp.
Fixes: e60c2991f18b ("serial: fsl_lpuart: remove RTSCTS handling from get_mctrl()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210729083109.31541-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing the qede module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing the qed module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
NXP SJA1105 VLAN regressions
These are 3 patches to fix issues seen with some more varied testing
done after the changes in the "Traffic termination for sja1105 ports
under VLAN-aware bridge" series were made:
https://patchwork.kernel.org/project/netdevbpf/cover/20210726165536.1338471-1-vladimir.oltean@nxp.com/
Issue 1: traffic no longer works on a port after leaving a VLAN-aware bridge
Issue 2: untagged traffic not dropped if pvid is absent from a VLAN-aware port
Issue 3: PTP and STP broken on ports under a VLAN-aware bridge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
imprecise port
On RX, a control packet with SJA1110 will have:
- an in-band control extension (DSA tag) composed of a header and an
optional trailer (if it is a timestamp frame). We can (and do) deduce
the source port and switch id from this.
- a VLAN header, which can either be the tag_8021q RX VLAN (pvid) or the
bridge VLAN. The sja1105_vlan_rcv() function attempts to deduce the
source port and switch id a second time from this.
The basic idea is that even though we don't need the source port
information from the tag_8021q header if it's a control packet, we do
need to strip that header before we pass it on to the network stack.
The problem is that we call sja1105_vlan_rcv for ports under VLAN-aware
bridges, and that function tells us it couldn't identify a tag_8021q
header, so we need to perform imprecise RX by VID. Well, we don't,
because we already know the source port and switch ID.
This patch drops the return value from sja1105_vlan_rcv and we just look
at the source_port and switch_id values from sja1105_rcv and sja1110_rcv
which were initialized to -1. If they are still -1 it means we need to
perform imprecise RX.
Fixes: 884be12f8566 ("net: dsa: sja1105: add support for imprecise RX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
with no pvid
Surprisingly, this configuration:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
still has the sja1105 switch sending untagged packets to the CPU (and
failing to decode them, since dsa_find_designated_bridge_port_by_vid
searches by VID 1 and rightfully finds no bridge VLAN 1 on a port).
Dumping the switch configuration, the VLANs are managed properly:
- the pvid of swp2 is 1 in the MAC Configuration Table, but
- only the CPU port is in the port membership of VLANID 1 in the VLAN
Lookup Table
When the ingress packets are tagged with VID 1, they are properly
dropped. But when they are untagged, they are able to reach the CPU
port. Also, when the pvid in the MAC Configuration Table is changed to
e.g. 55 (an unused VLAN), the untagged packets are also dropped.
So it looks like:
- the switch bypasses ingress VLAN membership checks for untagged traffic
- the reason why the untagged traffic is dropped when I make the pvid 55
is due to the lack of valid destination ports in VLAN 55, rather than
an ingress membership violation
- the ingress VLAN membership cheks are only done for VLAN-tagged traffic
Interesting. It looks like there is an explicit bit to drop untagged
traffic, so we should probably be using that to preserve user expectations.
Note that only VLAN-aware ports should drop untagged packets due to no
pvid - when VLAN-unaware, the software bridge doesn't do this even if
there is no pvid on any bridge port and on the bridge itself. So the new
sja1105_drop_untagged() function cannot simply be called with "false"
from sja1105_bridge_vlan_add() and with "true" from sja1105_bridge_vlan_del.
Instead, we need to also consider the VLAN awareness state. That means
we need to hook the "drop untagged" setting in all the same places where
the "commit pvid" logic is, and it needs to factor in all the state when
flipping the "drop untagged" bit: is our current pvid in the VLAN Lookup
Table, and is the current port in that VLAN's port membership list?
VLAN-unaware ports will never drop untagged frames because these checks
always succeed by construction, and the tag_8021q VLANs cannot be changed
by the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we no longer have the ultra-central sja1105_build_vlan_table(),
we need to be more careful about checking all corner cases manually.
For example, when a port leaves a VLAN-aware bridge, it becomes
standalone so its pvid should become a tag_8021q RX VLAN again. However,
sja1105_commit_pvid() only gets called from sja1105_bridge_vlan_add()
and from sja1105_vlan_filtering(), and no VLAN awareness change takes
place (VLAN filtering is a global setting for sja1105, so the switch
remains VLAN-aware overall).
This means that we need to put another sja1105_commit_pvid() call in
sja1105_bridge_member().
Fixes: 6dfd23d35e75 ("net: dsa: sja1105: delete vlan delta save/restore logic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jeremy Kerr says:
====================
Add Management Component Transport Protocol support
This series adds core MCTP support to the kernel. From the Kconfig
description:
Management Component Transport Protocol (MCTP) is an in-system
protocol for communicating between management controllers and
their managed devices (peripherals, host processors, etc.). The
protocol is defined by DMTF specification DSP0236.
This option enables core MCTP support. For communicating with other
devices, you'll want to enable a driver for a specific hardware
channel.
This implementation allows a sockets-based API for sending and receiving
MCTP messages via sendmsg/recvmsg on SOCK_DGRAM sockets. Kernel stack
control is all via netlink, using existing RTM_* messages. The userspace
ABI change is fairly small; just the necessary AF_/ETH_P_/ARPHDR_
constants, a new sockaddr, and a new netlink attribute.
For MAINTAINERS, I've just included netdev@ as the list entry. I'm happy
to alter this based on preferences here - an alternative would be the
OpenBMC list (the main user of the MCTP interface), or we can create a
new list entirely.
We have a couple of interface drivers almost ready to go at the moment,
but those can wait until the core code has some review.
This is v4 of the series; v1 and v2 were both RFC.
selinux folks: CCing 01/15 due to the new PF_MCTP protocol family.
linux-doc folks: CCing 15/15 for the new MCTP overview document.
Review, comments, questions etc. are most welcome.
Cheers,
Jeremy
v2:
- change to match spec terminology: controller -> component
- require specific capabilities for bind() & sendmsg()
- add address and tag defintions to uapi
- add selinux AF_MCTP table definitions
- remove strict cflags; warnings are present in common headers
v3:
- require caps for MCTP bind() & send()
- comment typo fixes
- switch to an array for local EIDs
- fix addrinfo dump iteration & error path
- add RTM_DELADDR
- remove GENMASK() and BIT() from uapi
v4:
- drop tun patch; that can be submitted separately
- keep nipa happy: add maintainer CCs, including doc and selinux
- net-next rebase
- Include AF_MCTP in af_family_slock_keys and pf_family_names
- Introduce MODULE_ definitions earlier
- upstream change: set_link_af no longer called with RTNL held
- add kdoc for net_device.mctp_ptr
- don't inline mctp_rt_match_eid
- require rtm_type == RTN_UNICAST in route management handlers
- remove unused RTAX policy table
- fix mctp_sock->keys rcu annotations
- fix spurious rcu_read_unlock in route input
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds a brief document about the sockets API provided for
sending and receiving MCTP messages from userspace.
This is roughly based on the OpenBMC design document, at:
https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.md
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we have a neighbour implementation, hook it up to the output
path to set the dest hardware address for outgoing packets.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change implements MCTP fragmentation (based on route & device MTU),
and corresponding reassembly.
The MCTP specification only allows for fragmentation on the originating
message endpoint, and reassembly on the destination endpoint -
intermediate nodes do not need to reassemble/refragment. Consequently,
we only fragment in the local transmit path, and reassemble
locally-bound packets. Messages are required to be in-order, so we
simply cancel reassembly on out-of-order or missing packets.
In the fragmentation path, we just break up the message into MTU-sized
fragments; the skb structure is a simple copy for now, which we can later
improve with a shared data implementation.
For reassembly, we keep track of incoming message fragments using the
existing tag infrastructure, allocating a key on the (src,dest,tag)
tuple, and reassembles matching fragments into a skb->frag_list.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Start filling-out the socket syscalls: bind, sendmsg & recvmsg.
This requires an input route implementation, so we add to
mctp_route_input, allowing lookups on binds & message tags. This just
handles single-packet messages at present, we will add fragmentation in
a future change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds the netlink interfaces for manipulating the MCTP
neighbour table.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an initial neighbour table implementation, to be used in the route
output path.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds RTM_GETROUTE, RTM_NEWROUTE & RTM_DELROUTE handlers,
allowing management of the MCTP route table.
Includes changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a simple routing table, and a couple of route output handlers, and
the mctp packet_type & handler.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds the infrastructure for managing MCTP netdevices; we add
a pointer to the AF_MCTP-specific data to struct netdevice, and hook up
the rtnetlink operations for adding and removing addresses.
Includes changes from Matt Johnston <matt@codeconstruct.com.au>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an empty drivers/net/mctp/, for future interface drivers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change introduces the user-visible MCTP header, containing the
protocol-specific addressing definitions.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simple packet header format as defined by DMTF DSP0236.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an empty socket implementation, plus initialisation/destruction
handlers.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Go runtime uses r30 for some special value called 'g'. It assumes
that value will remain unchanged even when calling VDSO functions.
Although r30 is non-volatile across function calls, the callee is free
to use it, as long as the callee saves the value and restores it before
returning.
It used to be true by accident that the VDSO didn't use r30, because the
VDSO was hand-written asm. When we switched to building the VDSO from C
the compiler started using r30, at least in some builds, leading to
crashes in Go. eg:
~/go/src$ ./all.bash
Building Go cmd/dist using /usr/lib/go-1.16. (go1.16.2 linux/ppc64le)
Building Go toolchain1 using /usr/lib/go-1.16.
go build os/exec: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
go build reflect: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
go tool dist: FAILED: /usr/lib/go-1.16/bin/go install -gcflags=-l -tags=math_big_pure_go compiler_bootstrap bootstrap/cmd/...: exit status 1
There are patches in flight to fix Go[1], but until they are released
and widely deployed we can workaround it in the VDSO by avoiding use of
r30.
Note this only works with GCC, clang does not support -ffixed-rN.
1: https://go-review.googlesource.com/c/go/+/328110
Fixes: ab037dd87a2f ("powerpc/vdso: Switch VDSO to generic C implementation.")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729131244.2595519-1-mpe@ellerman.id.au
|
|
With commit c9f3401313a5 ("powerpc: Always enable queued spinlocks for
64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always
enabled on ppc64le, external modules that use spinlock APIs are
failing.
ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor'
Before the above commit, modules were able to build without any
issues. Also this problem is not seen on other architectures. This
problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in
the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by
default and only enabled in certain conditions like
CONFIG_DEBUG_SPINLOCKS is set in the kernel config.
#include <linux/module.h>
spinlock_t spLock;
static int __init spinlock_test_init(void)
{
spin_lock_init(&spLock);
spin_lock(&spLock);
spin_unlock(&spLock);
return 0;
}
static void __exit spinlock_test_exit(void)
{
printk("spinlock_test unloaded\n");
}
module_init(spinlock_test_init);
module_exit(spinlock_test_exit);
MODULE_DESCRIPTION ("spinlock_test");
MODULE_LICENSE ("non-GPL");
MODULE_AUTHOR ("Srikar Dronamraju");
Given that spin locks are one of the basic facilities for module code,
this effectively makes it impossible to build/load almost any non GPL
modules on ppc64le.
This was first reported at https://github.com/openzfs/zfs/issues/11172
Currently shared_processor is exported as GPL only symbol.
Fix this for parity with other architectures by exposing
shared_processor to non-GPL modules too.
Fixes: 14c73bd344da ("powerpc/vcpu: Assume dedicated processors as non-preempt")
Cc: stable@vger.kernel.org # v5.5+
Reported-by: marc.c.dionne@gmail.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729060449.292780-1-srikar@linux.vnet.ibm.com
|
|
The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.
The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.
I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Krzysztof Kozlowski says:
====================
nfc: constify, continued (part 2)
On top of:
nfc: constify pointed data
https://lore.kernel.org/lkml/20210726145224.146006-1-krzysztof.kozlowski@canonical.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
File-scope struct nfcmrvl_if_ops is not modified so can be made const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety. This allows also
making file-scope nci_core_get_config_otp_ram_version array const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Loop iterators are simple integers, no point to optimize the size and
use u8. It only raises the question whether the variable is used in
some other context.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Size of firmware is a type of size_t, so print it directly instead of
casting to int.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nfcsim_abort_cmd() does not modify struct nfcsim, so local variable
can be a pointer to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
virtual_ncidev_ioctl() does not modify struct nfc_dev, so local variable
can be a pointer to const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The buffer passed to mei_nfc_send() can be const for correctness and
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The struct nfc_dev is not modified by nfc_get_drvdata() and
nfc_device_name() so it can be made a const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paolo Abeni says:
====================
sk_buff: optimize GRO for the common case
This is a trimmed down revision of "sk_buff: optimize layout for GRO",
specifically dropping the changes to the sk_buff layout[1].
This series tries to accomplish 2 goals:
- optimize the GRO stage for the most common scenario, avoiding a bunch
of conditional and some more code
- let owned skbs entering the GRO engine, allowing backpressure in the
veth GRO forward path.
A new sk_buff flag (!!!) is introduced and maintained for GRO's sake.
Such field uses an existing hole, so there is no change to the sk_buff
size.
[1] two main reasons:
- move skb->inner_ field requires some extra care, as some in kernel
users access and the fields regardless of skb->encapsulation.
- extending secmark size clash with ct and nft uAPIs
address the all above is possible, I think, but for sure not in a single
series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Leveraging the previous patch we can now avoid orphaning the
skb in the veth gro path, allowing correct backpressure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change leverages the infrastructure introduced by the previous
patches to allow soft devices passing to the GRO engine owned skbs
without impacting the fast-path.
It's up to the GRO caller ensuring the slow_gro bit validity before
invoking the GRO engine. The new helper skb_prepare_for_gro() is
introduced for that goal.
On slow_gro, skbs are aggregated only with equal sk.
Additionally, skb truesize on GRO recycle and free is correctly
updated so that sk wmem is not changed by the GRO processing.
rfc-> v1:
- fixed bad truesize on dev_gro_receive NAPI_FREE
- use the existing state bit
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.
We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the previous one, but tracking the
active_extensions field status.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the previous patch, but covering the dst field:
the slow_gro flag is additionally set when a dst is attached
to the skb
RFC -> v1:
- use the existing flag instead of adding a new one
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new flag tracks if any state field is set, so that
GRO requires 'unusual'/slow prepare steps.
Set such flag when a ct entry is attached to the skb,
and never clear it.
The new bit uses an existing hole into the sk_buff struct
RFC -> v1:
- use a single state bit, never clear it
- avoid moving the _nfct field
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base of
the device.
On Windows these are read by a special HingeAngleService process which
calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is
in tablet- or laptop-mode. The firmware may use this to disable the kbd and
touchpad to avoid spurious input in tablet-mode as well as to report
SW_TABLET_MODE info to the OS.
Since Linux does not call these undocumented methods, the SW_TABLET_MODE
info reported by various pdx86 drivers is incorrect on these devices.
Before this commit the intel-hid and thinkpad_acpi code already had 2
hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid
reporting broken info.
And now we also have a bug-report about the same problem in the intel-vbtn
code. Since there are at least 3 different ACPI hardware-ids in play, add
a new dual_accel_detect() helper which checks for all 3, rather then
adding different hardware-ids to the drivers as bug-reports trickle in.
Having shared code which checks all known hardware-ids is esp. important
for the intel-hid and intel-vbtn drivers as these are generic drivers
which are used on a lot of devices.
The BOSC0200 hardware-id requires special handling, because often it is
used for a single-accelerometer setup. Only in a few cases it refers to
a dual-accel setup, in which case there will be 2 I2cSerialBus resources
in the device's resource-list, so the helper checks for this.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011
Reported-and-tested-by: Julius Lehmann <julius@devpi.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com
|
|
Building with -Warray-bounds on systems with 64K pages there's a
warning:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c:226:34: warning: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Warray-bounds]
226 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:1630:48: note: in definition of macro ‘page_address’
1630 | #define page_address(page) lowmem_page_address(page)
| ^~~~
In file included from fs/btrfs/ctree.h:32,
from fs/btrfs/disk-io.c:23:
fs/btrfs/extent_io.h:98:15: note: while referencing ‘pages’
98 | struct page *pages[1];
| ^~~~~
The compiler has no way to know that in that case the nodesize is exactly
PAGE_SIZE, so the resulting number of pages will be correct (1).
Let's use num_extent_pages that makes the case nodesize == PAGE_SIZE
explicitly 1.
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
