summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-22target: Fix write payload exception handling with ->new_cmd_mapNicholas Bellinger
This patch fixes a bug for fabrics using tfo->new_cmd_map() that are expect transport_generic_request_failure() to be calling transport_send_check_condition_and_sense() for both READ and WRITE, instead of only for READ exceptions. This was originally observed with a failed WRITE_SAME_16 w/ unmap=0 using tcm_loop. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn()Dan Carpenter
This patch fixes a forever loop bug in iscsit_attach_ooo_cmdsn() while walking sess->sess_ooo_cmdsn_list when the received CmdSN is less than the tail of the list. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22iscsi-target: remove duplicate returnDan Carpenter
We returned on the line before already. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22target: Convert target_core_rd.c to use use BUG_ONJulia Lawall
Use BUG_ON(x) rather than if(x) BUG(); The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ -if (x) BUG(); +BUG_ON(x); @@ identifier x; @@ -if (!x) BUG(); +BUG_ON(!x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22iscsi-target: Fix leak on failure in iscsi_copy_param_list()Jesper Juhl
We leak memory if the allocations for 'new_param->name' or 'new_param->value' fail in iscsi_target_parameters.c::iscsi_copy_param_list() We also do a lot of variable assignments that are completely pointless if the allocations fail. So, let's move the allocations before the assignments and also make sure that we free whatever was allocated to one if the allocation fail. There's also some small CodingStyle fixups in there (curly braces on both branches of if statement, only one variable per line) since I was in the area anyway. And finally, error messages in the function are put on a single line for easy grep'abillity. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22target: Use ERR_CAST inlined functionThomas Meyer
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) The semantic patch that makes this output is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0Nicholas Bellinger
This patch changes target_emulate_inquiry_std() to set the 'not connected' (0x35) bit in standard INQUIRY response data when we are processing a request to a virtual LUN=0 mapping from struct se_device *g_lun0_dev that have been setup for us in transport_lookup_cmd_lun(). This addresses an issue where qla2xxx FC clients need to be able to create demo-mode I_T FC Nexuses by default, but should not be exposing the default set of TPG LUNs to all FC clients. This includes adding an new optional target_core_fabric_ops->tpg_check_demo_mode_login_only() caller to allow demo_mode nexuses to skip the old default of bulding a demo-mode MappedLUNs list via core_tpg_add_node_to_devs(). (roland: Add missing tpg_check_demo_mode_login_only check in core_dev_add_lun) Reported-by: Roland Dreier <roland@purestorage.com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-08-22Linux 3.1-rc3v3.1-rc3Linus Torvalds
2011-08-22net: Documentation: RFC 2553bis is now RFC 3493Geoffrey Thomas
Signed-off-by: Geoffrey Thomas <geofft@mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
2011-08-22Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22bcma: add uevent to the bus, to autoload driversDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC addressSenthil Balasubramanian
Due to some recent optimization done in the way the mac address bytes are written into the OTP memory, some AR9485 chipsets were forced to use the first byte from the eeprom template and the remaining bytes are read from OTP. AR9485 happens to use generic eeprom template which has 0x1 as the first byte causes issues in bringing up the card. So fixed the eeprom template accordingly to address the issue. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22rt2x00: do not drop usb dev reference counter on suspendStanislaw Gruszka
When hibernating ->resume may not be called by usb core, but disconnect and probe instead, so we do not increase the counter after decreasing it in ->supend. As a result we free memory early, and get crash when unplugging usb dongle. BUG: unable to handle kernel paging request at 6b6b6b9f IP: [<c06909b0>] driver_sysfs_remove+0x10/0x30 *pdpt = 0000000034f21001 *pde = 0000000000000000 Pid: 20, comm: khubd Not tainted 3.1.0-rc1-wl+ #20 LENOVO 6369CTO/6369CTO EIP: 0060:[<c06909b0>] EFLAGS: 00010202 CPU: 1 EIP is at driver_sysfs_remove+0x10/0x30 EAX: 6b6b6b6b EBX: f52bba34 ECX: 00000000 EDX: 6b6b6b6b ESI: 6b6b6b6b EDI: c0a0ea20 EBP: f61c9e68 ESP: f61c9e64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process khubd (pid: 20, ti=f61c8000 task=f6138270 task.ti=f61c8000) Call Trace: [<c06909ef>] __device_release_driver+0x1f/0xa0 [<c0690b20>] device_release_driver+0x20/0x40 [<c068fd64>] bus_remove_device+0x84/0xe0 [<c068e12a>] ? device_remove_attrs+0x2a/0x80 [<c068e267>] device_del+0xe7/0x170 [<c06d93d4>] usb_disconnect+0xd4/0x180 [<c06d9d61>] hub_thread+0x691/0x1600 [<c0473260>] ? wake_up_bit+0x30/0x30 [<c0442a39>] ? complete+0x49/0x60 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c06d96d0>] ? hub_disconnect+0xd0/0xd0 [<c0472eb4>] kthread+0x74/0x80 [<c0472e40>] ? kthread_worker_fn+0x150/0x150 [<c0809b3e>] kernel_thread_helper+0x6/0x10 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: fix suspend/resume races with unregister hwStanislaw Gruszka
Do not call ->suspend, ->resume methods after we unregister wiphy. Also delete sta_clanup timer after we finish wiphy unregister to avoid this: WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0() Hardware name: 6369CTO ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211] Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode] Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19 Call Trace: [<c0454cfd>] warn_slowpath_common+0x6d/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30 [<c05e05e5>] debug_print_object+0x85/0xa0 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211] [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180 [<c051175b>] kfree+0x8b/0x150 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211] [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211] [<c068d959>] device_release+0x19/0x80 [<c05d06ba>] kobject_release+0x7a/0x1c0 [<c07646a8>] ? rtnl_unlock+0x8/0x10 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211] [<c05d0640>] ? kobject_del+0x30/0x30 [<c05d1a6d>] kref_put+0x2d/0x60 [<c05d056d>] kobject_put+0x1d/0x50 [<c08015f4>] ? mutex_lock+0x14/0x40 [<c068d60f>] put_device+0xf/0x20 [<c069716a>] dpm_resume+0xca/0x160 [<c04912bd>] hibernation_snapshot+0xcd/0x260 [<c04903df>] ? freeze_processes+0x3f/0x90 [<c049151b>] hibernate+0xcb/0x1e0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c048fe60>] state_store+0xa0/0xb0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c05d0200>] kobj_attr_store+0x20/0x30 [<c0575ea4>] sysfs_write_file+0x94/0xf0 [<c051e26a>] vfs_write+0x9a/0x160 [<c0575e10>] ? sysfs_open_file+0x200/0x200 [<c051e3fd>] sys_write+0x3d/0x70 [<c080959f>] sysenter_do_call+0x12/0x28 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of ↵John W. Linville
master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth
2011-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-08-22Input: ad714x - read the interrupt status registers in a rowMichael Hennerich
The interrupt status registers should be read in row to avoid invalid data. Alter "read" method for both bus options to allow reading several registers in a row and make sure we read interrupt status registers properly. Read sequence saves 50% of bus transactions compared to single register reads. So use it also for the result registers, which are also located in a row. Also update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22Input: ad714x - use DMA-safe buffers for spi_write()Dmitry Torokhov
spi_write() requires use of DMA-safe (cacheline aligned) buffers. Also use the same buffers when reading data since to avoid extra locking and potential memory allocation in spi_write_then_read(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22Input: ad714x - fix endianness issuesMichael Hennerich
Allow driver to be used on Big Endian boxes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22Input: ad714xx-spi - force SPI bus into the default 8-bit modeMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-22xen-blkback: fixed indentation and commentsJoe Jin
This patch fixes belows: 1. Fix code style issue. 2. Fix incorrect functions name in comments. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.Joe Jin
When do block-attach/block-detach test with below steps, umount hangs in the guest. Furthermore shutdown ends up being stuck when umounting file-systems. 1. start guest. 2. attach new block device by xm block-attach in Dom0. 3. mount new disk in guest. 4. execute xm block-detach to detach the block device in dom0 until timeout 5. Any request to the disk will hung. Root cause: This issue is caused when setting backend device's state to 'XenbusStateClosing', which sends to the frontend the XenbusStateClosing notification. When frontend receives the notification it tries to release the disk in blkfront_closing(), but at that moment the disk is still in use by guest, so frontend refuses to close. Specifically it sets the disk state to XenbusStateClosing and sends the notification to backend - when backend receives the event, it disconnects the vbd from real device, and sets the vbd device state to XenbusStateClosing. The backend disconnects the real device/file, and any IO requests to the disk in guest will end up in ether, leaving disk DEAD and set to XenbusStateClosing. When the guest wants to disconnect the disk, umount will hang on blkif_release()->xlvbd_release_gendisk() as it is unable to send any IO to the disk, which prevents clean system shutdown. Solution: Don't disconnect backend until frontend state switched to XenbusStateClosed. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Daniel Stodden <daniel.stodden@citrix.com> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Annie Li <annie.li@oracle.com> Cc: Ian Campbell <Ian.Campbell@eu.citrix.com> [v1: Modified description a bit] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22ARM: 7051/1: cpuimx* boards: fix mach-types errorsEric Bénard
I made some changes to the entry in the ARM Machine Registry after submission which was the wrong thing to do. This patch should help to fix this error. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22ASoC: Clear completions from late WM8996 FLL lock IRQsMark Brown
In case we have a pending completion, for example due to a problem with the input clock which got corrected after we timed out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Clear any outstanding WM8962 FLL lock completions before waitingMark Brown
Ensure that we don't spuriously trigger early. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Ensure we only run Speyside WM8962 bias level callbacks onceMark Brown
We get called once per DAPM context but only need to run once. When DAPM was serialized this was a series of noops but now it can run in parallel we need to take proper care. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: Fix configuration of WM8996 input enablesMark Brown
There's no need for separate widgets for the enables (as the map already shows). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22ASoC: WM8996 record paths need AIFCLKMark Brown
Make AIFCLK supply the record paths otherwise record will not work unless there is a simultaneous playback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-22drm/radeon: Make vramlimit parameter actually work.Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer
Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook
Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-21Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
2011-08-21Input: ep93xx_keypad - add missing include of linux/module.hAxel Lin
ep93xx_keypad.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-21Input: tnetv107x-ts - add missing include of linux/module.hAxel Lin
tnetv107x-ts.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-21Btrfs: fix 64 bit divide problemJosef Bacik
This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-21Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush any pending end_io requests before DIO reads w/dioread_nolock ext4: fix nomblk_io_submit option so it correctly converts uninit blocks ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode ext4: Fix ext4_should_writeback_data() for no-journal mode
2011-08-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c ALSA: hda - Don't spew too many ELD errors ALSA: usb-audio - Fix missing mixer dB information ALSA: hda - Add "PCM" volume to vmaster slave list ALSA: hda - Fix duplicated capture-volume creation for ALC268 models ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist ALSA: snd_usb_caiaq: track submitted output urbs
2011-08-21OMAP4: clock: fix compile warningPaul Walmsley
Fix the following compile warning: arch/arm/mach-omap2/clock44xx_data.c: In function 'omap4xxx_clk_init': arch/arm/mach-omap2/clock44xx_data.c:3371:6: warning: 'cpu_clkflg' may be used uninitialized in this function The approach taken here is intended to work if omap4xxx_clk_init() is converted into an initcall. Thanks to Bjarne Steinsbo <bsteinsbo@gmail.com> for proposing another approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Bjarne Steinsbo <bsteinsbo@gmail.com>
2011-08-20pci: fix new kernel-doc warning in pci.cRandy Dunlap
Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-20sparc: Allow handling signals when stack is corrupted.David S. Miller
If we can't push the pending register windows onto the user's stack, we disallow signal delivery even if the signal would be delivered on a valid seperate signal stack. Add a register window save area in the signal frame, and store any unsavable windows there. On sigreturn, if any windows are still queued up in the signal frame, try to push them back onto the stack and if that fails we kill the process immediately. This allows the debug/tst-longjmp_chk2 glibc test case to pass. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20Input: max11801_ts - correct license statementJiejing Zhang
The original license statement was confusing since it was unclear if the license was pure GPLv2 or GPLv2+ and did not match the license of the driver max11801_ts was derived from. The license is GPLv2+. Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-20atm: br2684: Fix oops due to skb->dev being NULLDaniel Schwierzeck
This oops have been already fixed with commit 27141666b69f535a4d63d7bc6d9e84ee5032f82a atm: [br2684] Fix oops due to skb->dev being NULL It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). but have been introduced again with commit b6211ae7f2e56837c6a4849316396d1535606e90 atm: Use SKB queue and list helpers instead of doing it by-hand. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfreeJulia Lawall
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.cTakashi Iwai
snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Don't spew too many ELD errorsTakashi Iwai
Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
generated by cgit (git 2.34.1) at 2025-09-15 18:49:26 +0000