summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-30powerpc/p1023rds: Fix the error of bank-width of nor flashChunhe Lan
In the p1023rds, a physical bus of nor flash is 16 bits width. The bank-width is width (in bytes) of the bus width. So, the value of bank-width of nor flash is not one, and it should be two. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30powerpc/85xx: enable caam crypto driver by defaultKim Phillips
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30e1000: Fix driver to be used on PA RISC C8000 workstationsJeff Kirsher
The checksum field in the EEPROM on HPPA is really not a checksum but a signature (0x16d6). So allow 0x16d6 as the matching checksum on HPPA systems. This issue is present on longterm/stable kernels, I have verified that this patch is applicable back to at least 2.6.32.y kernels. v2- changed ifdef to use CONFIG_PARISC instead of __hppa__ CC: Guy Martin <gmsoft@tuxicoman.be> CC: Rolf Eike Beer <eike-kernel@sf-tec.de> CC: Matt Turner <mattst88@gmail.com> Reported-by: Mikulas Patocka <mikulas@artax.kerlin.mff.cuni.cz> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-31writeback: show raw dirtied_when in trace writeback_single_inodeWu Fengguang
Save inode->dirtied_when in the raw trace output for reliable scripting, and to also show in formatted output the relative age in seconds for easy human reading. CC: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-08-30MAINTAINERS: Update BNA 10G MaintainerIan Campbell
ddutt@brocade.com bounces with 550 "RESOLVER.ADR.RecipNotFound" Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30MAINTAINERS: Update Cisco VIC driver maintainersIan Campbell
vkolluri@cisco.com bounces and I get "Unknown address error 550". Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: David Wang <dwang2@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30MAINTAINERS: Update ATLX driver maintainersIan Campbell
jie.yang@atheros.com bounces and I get a 550 "Unknown address error". Perhaps they have moved on? Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: Jie Yang <jie.yang@atheros.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30net: ipv4: relax AF_INET check in bind()Eric Dumazet
commit d0733d2e29b65 (Check for mistakenly passed in non-IPv4 address) added regression on legacy apps that use bind() with AF_UNSPEC family. Relax the check, but make sure the bind() is done on INADDR_ANY addresses, as AF_UNSPEC has probably no sane meaning for other addresses. Bugzilla reference : https://bugzilla.kernel.org/show_bug.cgi?id=42012 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-and-bisected-by: Rene Meier <r_meier@freenet.de> CC: Marcus Meissner <meissner@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2011-08-30net: relax PKTINFO non local ipv6 udp xmit checkMaciej Żenczykowski
Allow transparent sockets to be less restrictive about the source ip of ipv6 udp packets being sent. Google-Bug-Id: 5018138 Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: "Erik Kline" <ek@google.com> CC: "Lorenzo Colitti" <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-30ath9k_hw: fix calibration on 5 ghzFelix Fietkau
ADC calibrations cannot run on 5 GHz with fast clock enabled. They need to be disabled, otherwise they'll hang and IQ mismatch calibration will not be run either. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Adrian Chadd <adrian@freebsd.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Only Panther cheetah+ chips have POPC.
2011-08-30Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add s/r quirk for Compaq Presario V5245EU drm/radeon/kms: evergreen & ni reset SPI block on CP resume drm: Fix the number of connector and encoder to cleanup functions
2011-08-30bitops: Move find_next_bit.o from lib-y to obj-yGeert Uytterhoeven
If there are no builtin users of find_next_bit_le() and find_next_zero_bit_le(), these functions are not present in the kernel image, causing m68k allmodconfig to fail with: ERROR: "find_next_zero_bit_le" [fs/ufs/ufs.ko] undefined! ERROR: "find_next_bit_le" [fs/udf/udf.ko] undefined! ... This started to happen after commit 171d809df189 ("m68k: merge mmu and non-mmu bitops.h"), as m68k had its own inline versions before. commit 63e424c84429 ("arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT, BIT_LE, LAST_BIT}") added find_last_bit.o to obj-y (so it's always included), but find_next_bit.o to lib-y (so it gets removed by the linker if there are no builtin users). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-30netfilter: update netfilter git URLPatrick McHardy
Netfilter git trees are moving to a directory shared by Pablo and myself, update git URLs. Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30netfilter: nf_ct_tcp: wrong multiplication of TCPOLEN_TSTAMP_ALIGNED in ↵Jozsef Kadlecsik
tcp_sack skips fastpath The wrong multiplication of TCPOLEN_TSTAMP_ALIGNED by 4 skips the fast path for the timestamp-only option. Bug reported by Michael M. Builov (netfilter bugzilla #738). Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30netfilter: nf_ct_tcp: fix incorrect handling of invalid TCP optionJozsef Kadlecsik
Michael M. Builov reported that in the tcp_options and tcp_sack functions of netfilter TCP conntrack the incorrect handling of invalid TCP option with too big opsize may lead to read access beyond tcp-packet or buffer allocated on stack (netfilter bugzilla #738). The fix is to stop parsing the options at detecting the broken option. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30netfilter: nf_ct_pptp: fix DNATed PPTP connection address translationSanket Shah
When both the server and the client are NATed, the set-link-info control packet containing the peer's call-id field is not properly translated. I have verified that it was working in 2.6.16.13 kernel previously but due to rewrite, this scenario stopped working (Not knowing exact version when it stopped working). Signed-off-by: Sanket Shah <sanket.shah@elitecore.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30netfilter: nf_queue: reject NF_STOLEN verdicts from userspaceFlorian Westphal
A userspace listener may send (bogus) NF_STOLEN verdict, which causes skb leak. This problem was previously fixed via 64507fdbc29c3a622180378210ecea8659b14e40 (netfilter: nf_queue: fix NF_STOLEN skb leak) but this had to be reverted because NF_STOLEN can also be returned by a netfilter hook when iterating the rules in nf_reinject. Reject userspace NF_STOLEN verdict, as suggested by Michal Miroslaw. This is complementary to commit fad54440438a7c231a6ae347738423cbabc936d9 (netfilter: avoid double free in nf_reinject). Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-08-30KVM: Fix instruction size issue in pvclock scalingDuncan Sands
Commit de2d1a524e94 ("KVM: Fix register corruption in pvclock_scale_delta") introduced a mul instruction that may have only a memory operand; the assembler therefore cannot select the correct size: pvclock.s:229: Error: no instruction mnemonic suffix given and no register operands; can't size instruction In this example the assembler is: #APP mul -48(%rbp) ; shrd $32, %rdx, %rax #NO_APP A simple solution is to use mulq. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-30drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher
Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse
For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30md: fix clearing of 'blocked' flag in the presence of bad blocks.NeilBrown
When the 'blocked' flag on a device is cleared while there are unacknowledged bad blocks we must fail the device. This is needed for backwards compatability of the interface. The code currently uses the wrong test for "unacknowledged bad blocks exist". Change it to the right test. Signed-off-by: NeilBrown <neilb@suse.de>
2011-08-29sparc64: Only Panther cheetah+ chips have POPC.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29acpica: ACPI_MAX_SLEEP should be 2 sec, not 20Len Brown
This limit is a workaround for AML that sleeps too long, but the workaround didn't work b/c of a typo. https://bugzilla.kernel.org/show_bug.cgi?id=13195 Signed-off-by: Len Brown <len.brown@intel.com> cc: stable@kernel.org # 2.6.35..3.0
2011-08-29Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pm: avoid writing the auxillary control register for ARMv7 ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness ARM: pm: arm920/926: fix number of registers saved ARM: pm: CPU specific code should not overwrite r1 (v:p offset) ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU ARM: 7065/1: kexec: ensure new kernel is entered in ARM state ARM: 7003/1: vexpress: Add clock definition for the SP805. ARM: 7051/1: cpuimx* boards: fix mach-types errors ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation. ARM: 6967/1: ep93xx: ts72xx: fix board model detection ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards ARM: cache: detect VIPT aliasing I-cache on ARMv6 ARM: twd: register clockevents device before enabling PPI ARM: realview: ensure visibility of writes during reset ARM: perf: make name of arm_pmu_type consistent ARM: perf: fix prototype of release_pmu ARM: fix perf build with uclibc toolchains
2011-08-29Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-footbridge: add missing header file <video/vga.h> ARM: mach-orion5x: add missing header file <linux/vga.h> arm: fix compile failure in orion5x/dns323-setup.c at91: at91sam9261.c: fix typo in t2_clk alias for atmel_tcb.0 ARM: S5P: fix bug in spdif_clk_get_rate ARM: EXYNOS4: Add restart hook for proper reboot ARM: EXYNOS4: Increase reset delay for USB HOST PHY ARM: S5P: add required chained_irq_enter/exit to gpio-int code ARM: EXYNOS4: add required chained_irq_enter/exit to eint code ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler ARM: S3C64XX: Fix build break in PM debug ARM: S5PV210: Fix build warning ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device ARM: EXYNOS4: remove duplicated inclusion ARM: EXYNOS4: Fix wrong devname to support clkdev ARM: EXYNOS4: Use the correct regulator names on universal_c210 ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set() ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit()
2011-08-29remove remaining references to nfsservctlStephen Rothwell
These were missed in commit f5b940997397 "All Arch: remove linkage for sys_nfsservctl system call" due to them having no sys_ prefix (presumably). Cc: NeilBrown <neilb@suse.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netpoll: fix incorrect access to skb data in __netpoll_rx cassini: init before use in cas_interruptN. can: ti_hecc: Fix uninitialized spinlock in probe can: ti_hecc: Fix unintialized variable net: sh_eth: fix the compile error net/phy: fix DP83865 phy interrupt handler sendmmsg/sendmsg: fix unsafe user pointer access ibmveth: Fix leak when recycling skb and hypervisor returns error arp: fix rcu lockdep splat in arp_process() bridge: fix a possible use after free bridge: Pseudo-header required for the checksum of ICMPv6 mcast: Fix source address selection for multicast listener report MAINTAINERS: Update GIT trees for network development ath9k: Fix PS wrappers in ath9k_set_coverage_class carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock wl12xx: add max_sched_scan_ssids value to the hw description wl12xx: Fix validation of pm_runtime_get_sync return value wl12xx: Remove obsolete testmode NVS push command bcma: add uevent to the bus, to autoload drivers ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address ...
2011-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt sparc: Remove another reference to nfsservctl
2011-08-29Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support ARM: mach-shmobile: sh7372 MSIOF clock support ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS ARM: mach-shmobile: mackerel: Add USB-DMA ID mmc: sdhi, mmcif: zboot: Correct clock disable logic ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle ARM: static should be at beginning of declaration ARM: mach-shmobile: Use CMT2 for timer on sh7372 ARM: mach-shmobile: sh7372: Add USB-DMAC support
2011-08-29Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: fix the compile error in setup-sh7757.c serial: sh-sci: report CTS as active for get_mctrl sh: Add unaligned memory access for PC relative intructions sh: Fix unaligned memory access for branches without delay slots sh: Fix up fallout from cpuidle changes. serial: sh-sci: console Runtime PM support sh: Fix conflicting definitions of ptrace_triggered serial: sh-sci: fix DMA build by including dma-mapping.h serial: sh-sci: Fix up default regtype probing. sh: intc: enable both edges GPIO interrupts on sh7372 shwdt: fix usage of mod_timer clocksource: sh_cmt: wait for CMCNT on init V2
2011-08-29iwlegacy: fix BUG_ON(info->control.rates[0].idx < 0)Stanislaw Gruszka
When trying to connect to 5GHz we can provide negative index to mac80211 what trigger BUG_ON. Reason of iwl-3945-rs malfunction on 5GHz is unknown and needs further investigation. For now, to do not trigger a bug, correct value and just print WARNING. Address bug: https://bugzilla.redhat.com/show_bug.cgi?id=730653 Reported-and-tested-by: Jan Teichmann <jan.teichmann@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29ath9k_hw: Fix init mode register regressionRajkumar Manoharan
The commit 172805ad46b78717a738ca5c7908c68f0326d3a9 overwirtes additional clock settings of AR9330 to all AR9300 chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29MAINTAINERS: change framebuffer maintainerFlorian Tobias Schandinat
As Paul has not much time for it I take over maintaining the framebuffer subsystem. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-29sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and ↵Kjetil Oftedal
timer interrupt On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts and has a specialized interrupt handler. IPI is currently set to use IRQ 14 as well, which causes it to trigger the timer interrupt handler, and not the IPI interrupt handler. The IPI interrupt is therefore changed to IRQ 13, which is the highest normally handled interrupt. This IRQ is also used for SBUS interrupts, however there is nothing in the IPI/SBUS interrupt handlers that indicate that they will not handle sharing the interrupt. (IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a sun4d system) Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29sparc: Remove another reference to nfsservctlStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-29MAINTAINERS: Add some missed Wolfson filesMark Brown
Mostly input related. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim
It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-29perf events: Fix slow and broken cgroup context switch codeStephane Eranian
The current cgroup context switch code was incorrect leading to bogus counts. Furthermore, as soon as there was an active cgroup event on a CPU, the context switch cost on that CPU would increase by a significant amount as demonstrated by a simple ping/pong example: $ ./pong Both processes pinned to CPU1, running for 10s 10684.51 ctxsw/s Now start a cgroup perf stat: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100 $ ./pong Both processes pinned to CPU1, running for 10s 6674.61 ctxsw/s That's a 37% penalty. Note that pong is not even in the monitored cgroup. The results shown by perf stat are bogus: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100 Performance counter stats for 'sleep 100': CPU1 <not counted> cycles test CPU1 16,984,189,138 cycles # 0.000 GHz The second 'cycles' event should report a count @ CPU clock (here 2.4GHz) as it is counting across all cgroups. The patch below fixes the bogus accounting and bypasses any cgroup switches in case the outgoing and incoming tasks are in the same cgroup. With this patch the same test now yields: $ ./pong Both processes pinned to CPU1, running for 10s 10775.30 ctxsw/s Start perf stat with cgroup: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Run pong outside the cgroup: $ /pong Both processes pinned to CPU1, running for 10s 10687.80 ctxsw/s The penalty is now less than 2%. And the results for perf stat are correct: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Performance counter stats for 'sleep 10': CPU1 <not counted> cycles test # 0.000 GHz CPU1 23,933,981,448 cycles # 0.000 GHz Now perf stat reports the correct counts for for the non cgroup event. If we run pong inside the cgroup, then we also get the correct counts: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Performance counter stats for 'sleep 10': CPU1 22,297,726,205 cycles test # 0.000 GHz CPU1 23,933,981,448 cycles # 0.000 GHz 10.001457237 seconds time elapsed Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110825135803.GA4697@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29sched: Fix a memory leak in __sdt_free()WANG Cong
This patch fixes the following memory leak: unreferenced object 0xffff880107266800 (size 512): comm "sched-powersave", pid 3718, jiffies 4323097853 (age 27495.450s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81133940>] create_object+0x187/0x28b [<ffffffff814ac103>] kmemleak_alloc+0x73/0x98 [<ffffffff811232ba>] __kmalloc_node+0x104/0x159 [<ffffffff81044b98>] kzalloc_node.clone.97+0x15/0x17 [<ffffffff8104cb90>] build_sched_domains+0xb7/0x7f3 [<ffffffff8104d4df>] partition_sched_domains+0x1db/0x24a [<ffffffff8109ee4a>] do_rebuild_sched_domains+0x3b/0x47 [<ffffffff810a00c7>] rebuild_sched_domains+0x10/0x12 [<ffffffff8104d5ba>] sched_power_savings_store+0x6c/0x7b [<ffffffff8104d5df>] sched_mc_power_savings_store+0x16/0x18 [<ffffffff8131322c>] sysdev_class_store+0x20/0x22 [<ffffffff81193876>] sysfs_write_file+0x108/0x144 [<ffffffff81135b10>] vfs_write+0xaf/0x102 [<ffffffff81135d23>] sys_write+0x4d/0x74 [<ffffffff814c8a42>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org # 3.0 Link: http://lkml.kernel.org/r/1313671017-4112-1-git-send-email-amwang@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29sched: Move blk_schedule_flush_plug() out of __schedule()Thomas Gleixner
There is no real reason to run blk_schedule_flush_plug() with interrupts and preemption disabled. Move it into schedule() and call it when the task is going voluntarily to sleep. There might be false positives when the task is woken between that call and actually scheduling, but that's not really different from being woken immediately after switching away. This fixes a deadlock in the scheduler where the blk_schedule_flush_plug() callchain enables interrupts and thereby allows a wakeup to happen of the task that's going to sleep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org # 2.6.39+ Link: http://lkml.kernel.org/n/tip-dwfxtra7yg1b5r65m32ywtct@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29sched: Separate the scheduler entry for preemptionThomas Gleixner
Block-IO and workqueues call into notifier functions from the scheduler core code with interrupts and preemption disabled. These calls should be made before entering the scheduler core. To simplify this, separate the scheduler core code into __schedule(). __schedule() is directly called from the places which set PREEMPT_ACTIVE and from schedule(). This allows us to add the work checks into schedule(), so they are only called when a task voluntary goes to sleep. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org # 2.6.39+ Link: http://lkml.kernel.org/r/20110622174918.813258321@linutronix.de Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-29ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock supportMagnus Damm
Add clock control support for sh7372 CMT hardware blocks. No upstream sh7372 boards are making use of CMT3 + CMT4, but the sh7372 hardware happens to come out of reset with all CMT MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: sh7372 MSIOF clock supportMagnus Damm
Add clock control support for sh7372 MSIOF hardware blocks. No upstream sh7372 boards are making use of MSIOF0->2, but the sh7372 hardware happens to come out of reset with all MSIOF MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settingsKuninori Morimoto
USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214 this patch tested on mackerel board Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecterKuninori Morimoto
MAINCKSEL is [29:28], not [27:24] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCSMagnus Damm
This patch removes support for the SGX interrupt source in the sh7372 INTCS controller. The SGX hardware block included in sh7372 is already hooked up to the ARM Cortex-A8 core using the INTCA controller, so SGX users are encouraged to make use of that interrupt source instead. Removing support for the SGX interrupt source in INTCS simplifies the sh7372 power management code by allowing us to assume that only INTCA needs to be powered on to operate the SGX hardware. If the INTCS interrupt source would be kept then the kernel would be forced to deal with additional dependencies that does not follow the regular power domain hiearachy. With this patch in place we can safely power down INTCS while the SGX is operating. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-29Merge branch 'rmobile/dma' into rmobile-fixes-for-linusPaul Mundt
generated by cgit (git 2.34.1) at 2025-09-13 19:59:49 +0000