| Age | Commit message (Collapse) | Author |
|---|
|
We have maintain PagePrivate and page_private and page reference
w/ {set,clear}_page_private_*, it doesn't need to call
folio_detach_private() in the end of .invalidate_folio and
.release_folio, remove it and use f2fs_bug_on instead.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Convert to use remove_proc_subtree() and kill kobject_del() directly.
kobject_put() actually covers kobject removal automatically, which is
single stage removal.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume") uses
regmap_reinit_cache() to fix the suspend/resume issue with the VOP2
driver. During discussion it came up that we should rather use
regcache_sync() instead. As the original patch is already applied
fix this up in this follow-up patch.
Fixes: afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230417123747.2179695-1-s.hauer@pengutronix.de
|
|
Assignment of NVIDIA Ampere-based GPUs have seen a regression since the
below referenced commit, where the reduced D3hot transition delay appears
to introduce a small window where a D3hot->D0 transition followed by a bus
reset can wedge the device. The entire device is subsequently unavailable,
returning -1 on config space read and is unrecoverable without a host
reset.
This has been observed with RTX A2000 and A5000 GPU and audio functions
assigned to a Windows VM, where shutdown of the VM places the devices in
D3hot prior to vfio-pci performing a bus reset when userspace releases the
devices. The issue has roughly a 2-3% chance of occurring per shutdown.
Restoring the HDA controller d3hot_delay to the effective value before the
below commit has been shown to resolve the issue. NVIDIA confirms this
change should be safe for all of their HDA controllers.
Fixes: 3e347969a577 ("PCI/PM: Reduce D3hot delay with usleep_range()")
Link: https://lore.kernel.org/r/20230413194042.605768-1-alex.williamson@redhat.com
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tarun Gupta <targupta@nvidia.com>
Cc: Abhishek Sahu <abhsahu@nvidia.com>
Cc: Tarun Gupta <targupta@nvidia.com>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Various code improvements. These remove redundant code and
clean up less-than-optimal original implementations.
|
|
Make it possible to load lirc program type with just CAP_BPF. There is
nothing exceptional about lirc programs that means they require
SYS_CAP_ADMIN.
In order to attach or detach a lirc program type you need permission to
open /dev/lirc0; if you have permission to do that, you can alter all
sorts of lirc receiving options. Changing the IR protocol decoder is no
different.
Right now on a typical distribution /dev/lirc devices are only
read/write by root. Ideally we would make them group read/write like
other devices so that local users can use them without becoming root.
Signed-off-by: Sean Young <sean@mess.org>
Link: https://lore.kernel.org/r/ZD0ArKpwnDBJZsrE@gofer.mess.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
PM8550 is different than PM8550VE/VS, because the latter has much
smaller amount of supplies (l1-3 and s1-6) and regulators. The PM8550
has on the other hand one pin for vdd-l1-l4-l10 supplies. Correct the
if:then: clause with their supplies.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230327080626.24200-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.
Fixes: a9d273671440 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using many type of mutex lock, but
some of them has helper function, but some doesn't.
Or, it has helper function, but is static.
This patch-set adds helper function and use it.
|
|
Fixes a bunch of warnings including:
vmlinux.o: warning: objtool: select_reloc_root+0x314: unreachable instruction
vmlinux.o: warning: objtool: finish_inode_if_needed+0x15b1: unreachable instruction
vmlinux.o: warning: objtool: get_bio_sector_nr+0x259: unreachable instruction
vmlinux.o: warning: objtool: raid_wait_read_end_io+0xc26: unreachable instruction
vmlinux.o: warning: objtool: raid56_parity_alloc_scrub_rbio+0x37b: unreachable instruction
...
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302210709.IlXfgMpX-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64). As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).
../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2703 | btrfs_setup_sprout(fs_info, seed_devices);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
70 | (__if_trace.miss_hit[1]++,1) : \
| ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
1878 | u64 right_gen;
| ^~~~~~~~~
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging dir dentries of a directory, we iterate over the subvolume
tree to find dir index keys on leaves modified in the current transaction.
This however is heavy on locking, since btrfs_search_forward() may often
keep locks on extent buffers for quite a while when walking the tree to
find a suitable leaf modified in the current transaction and with a key
not smaller than then the provided minimum key. That means it will block
other tasks trying to access the subvolume tree, which may be common fs
operations like creating, renaming, linking, unlinking, reflinking files,
etc.
A better solution is to iterate the log tree, since it's much smaller than
a subvolume tree and just use plain btrfs_search_slot() (or the wrapper
btrfs_for_each_slot()) and only contains dir index keys added in the
current transaction.
The following bonnie++ test on a non-debug kernel (with Debian's default
kernel config) on a 20G null block device, was used to measure the impact:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
NR_DIRECTORIES=20
NR_FILES=20480 # must be a multiple of 1024
DATASET_SIZE=$(( (8 * 1024 * 1024 * 1024) / 1048576 )) # 8 GiB as megabytes
DIRECTORY_SIZE=$(( DATASET_SIZE / NR_FILES ))
NR_FILES=$(( NR_FILES / 1024 ))
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
bonnie++ -u root -d $MNT \
-n $NR_FILES:$DIRECTORY_SIZE:$DIRECTORY_SIZE:$NR_DIRECTORIES \
-r 0 -s $DATASET_SIZE -b
umount $MNT
Before patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 376k 99 1.1g 98 939m 92 1527k 99 3.2g 99 9060 256
Latency 24920us 207us 680ms 5594us 171us 2891us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 96 +++++ +++ 20480 95 20480 99 +++++ +++ 20480 97
Latency 8708us 137us 5128us 6743us 60us 19712us
After patchset:
Version 2.00a ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Name:Size etc /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
debian0 8G 384k 99 1.2g 99 971m 91 1533k 99 3.3g 99 9180 309
Latency 24930us 125us 661ms 5587us 46us 2020us
Version 2.00a ------Sequential Create------ --------Random Create--------
debian0 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
20/20 20480 90 +++++ +++ 20480 99 20480 99 +++++ +++ 20480 97
Latency 7030us 61us 1246us 4942us 56us 16855us
The patchset consists of this patch plus a previous one that has the
following subject:
"btrfs: avoid iterating over all indexes when logging directory"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory, after copying all directory index items from the
subvolume tree to the log tree, we iterate over the subvolume tree to find
all dir index items that are located in leaves COWed (or created) in the
current transaction. If we keep logging a directory several times during
the same transaction, we end up iterating over the same dir index items
everytime we log the directory, wasting time and adding extra lock
contention on the subvolume tree.
So just keep track of the last logged dir index offset in order to start
the search for that index (+1) the next time the directory is logged, as
dir index values (key offsets) come from a monotonically increasing
counter.
The following test measures the difference before and after this change:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
# Time values in milliseconds.
declare -a fsync_times
# Total number of files added to the test directory.
num_files=1000000
# Fsync directory after every N files are added.
fsync_period=100
mkdir $MNT/testdir
fsync_total_time=0
for ((i = 1; i <= $num_files; i++)); do
echo -n > $MNT/testdir/file_$i
if [ $((i % fsync_period)) -eq 0 ]; then
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
fsync_total_time=$((fsync_total_time + (end - start)))
fsync_times[i]=$(( (end - start) / 1000000 ))
echo -n -e "Progress $i / $num_files\r"
fi
done
echo -e "\nHistogram of directory fsync duration in ms:\n"
printf '%s\n' "${fsync_times[@]}" | \
perl -MStatistics::Histogram -e '@d = <>; print get_histogram(\@d);'
fsync_total_time=$((fsync_total_time / 1000000))
echo -e "\nTotal time spent in fsync: $fsync_total_time ms\n"
echo
umount $MNT
The test was run on a non-debug kernel (Debian's default kernel config)
against a 15G null block device.
Result before this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 362.000; Mean: 34.556; Median: 31.000; Stddev: 25.751
Percentiles: 90th: 71.000; 95th: 77.000; 99th: 81.000
3.000 - 5.278: 1423 #################################
5.278 - 8.854: 1173 ###########################
8.854 - 14.467: 591 ##############
14.467 - 23.277: 1025 #######################
23.277 - 37.105: 1422 #################################
37.105 - 58.809: 2036 ###############################################
58.809 - 92.876: 2316 #####################################################
92.876 - 146.346: 6 |
146.346 - 230.271: 6 |
230.271 - 362.000: 2 |
Total time spent in fsync: 350527 ms
Result after this change:
Histogram of directory fsync duration in ms:
Count: 10000
Range: 3.000 - 1088.000; Mean: 8.704; Median: 8.000; Stddev: 12.576
Percentiles: 90th: 12.000; 95th: 14.000; 99th: 17.000
3.000 - 6.007: 3222 #################################
6.007 - 11.276: 5197 #####################################################
11.276 - 20.506: 1551 ################
20.506 - 36.674: 24 |
36.674 - 201.552: 1 |
201.552 - 353.841: 4 |
353.841 - 1088.000: 1 |
Total time spent in fsync: 92114 ms
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Even before the scrub rework, if we have some corrupted metadata failed
to be repaired during replace, we still continue replacing and let it
finish just as there is nothing wrong:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished
This can lead to unexpected problems for the resulting filesystem.
[CAUSE]
Btrfs reuses scrub code path for dev-replace to iterate all dev extents.
But unlike scrub, dev-replace doesn't really bother to check the scrub
progress, which records all the errors found during replace.
And even if we check the progress, we cannot really determine which
errors are minor, which are critical just by the plain numbers.
(remember we don't treat metadata/data checksum error differently).
This behavior is there from the very beginning.
[FIX]
Instead of continuing the replace, just error out if we hit an
unrepaired metadata sector.
Now the dev-replace would be rejected with -EIO, to let the user know.
Although it also means, the filesystem has some metadata error which
cannot be repaired, the user would be upset anyway.
The new dmesg would look like this:
BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1
BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5
BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752
BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's pointless to have a while loop at btrfs_get_next_valid_item(), as if
the slot on the current leaf is beyond the last item, we call
btrfs_next_leaf(), which leaves us at a valid slot of the next leaf (or
a valid slot in the current leaf if after releasing the path an item gets
pushed from the next leaf to the current leaf).
So just call btrfs_next_leaf() if the current slot on the current leaf is
beyond the last item.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Link: https://lore.kernel.org/linux-btrfs/Y%2F+n1wS%2F4XAH7X1p@nz/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182228
CC: stable@vger.kernel.org # 6.2+
Reviewed-by: Neal Gompa <neal@gompa.dev
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the scrub rework, the following RAID56 functions are no longer
called:
- raid56_add_scrub_pages()
- raid56_alloc_missing_rbio()
- raid56_submit_missing_rbio()
Those functions are all utilized by scrub to handle missing device cases
for RAID56.
However the new scrub code handle them in a completely different way:
- If it's data stripe, go recovery path through btrfs_submit_bio()
- If it's P/Q stripe, it would be handled through
raid56_parity_submit_scrub_rbio()
And that function would handle dev-replace and repair properly.
Thus we can safely remove those functions.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Since scrub path has been fully moved to scrub_stripe based facilities,
no more scrub_bio would be submitted.
Thus we can remove it completely, this involves:
- SCRUB_SECTORS_PER_BIO macro
- SCRUB_BIOS_PER_SCTX macro
- SCRUB_MAX_PAGES macro
- BTRFS_MAX_MIRRORS macro
- scrub_bio structure
- scrub_ctx::bios member
- scrub_ctx::curr member
- scrub_ctx::bios_in_flight member
- scrub_ctx::workers_pending member
- scrub_ctx::list_lock member
- scrub_ctx::list_wait member
- function scrub_bio_end_io_worker()
- function scrub_pending_bio_inc()
- function scrub_pending_bio_dec()
- function scrub_throttle()
- function scrub_submit()
- function scrub_find_csum()
- function drop_csum_range()
- Some unnecessary flush and scrub pauses
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Those two structures are used to represent a bunch of sectors for scrub,
but now they are fully replaced by scrub_stripe in one go, so we can
remove them. This involves:
- structure scrub_block
- structure scrub_sector
- structure scrub_page_private
- function attach_scrub_page_private()
- function detach_scrub_page_private()
Now we no longer need to use page::private to handle subpage.
- function alloc_scrub_block()
- function alloc_scrub_sector()
- function scrub_sector_get_page()
- function scrub_sector_get_page_offset()
- function scrub_sector_get_kaddr()
- function bio_add_scrub_sector()
- function scrub_checksum_data()
- function scrub_checksum_tree_block()
- function scrub_checksum_super()
- function scrub_check_fsid()
- function scrub_block_get()
- function scrub_block_put()
- function scrub_sector_get()
- function scrub_sector_put()
- function scrub_bio_end_io()
- function scrub_block_complete()
- function scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old scrub code has different entrance to verify the content, and
since we have removed the writeback path, now we can start removing the
re-check part, including:
- scrub_recover structure
- scrub_sector::recover member
- function scrub_setup_recheck_block()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_group_good_copy()
- function scrub_repair_sector_from_good_copy()
- function scrub_is_page_on_raid56()
- function full_stripe_lock()
- function search_full_stripe_lock()
- function get_full_stripe_logical()
- function insert_full_stripe_lock()
- function lock_full_stripe()
- function unlock_full_stripe()
- btrfs_block_group::full_stripe_locks_root member
- btrfs_full_stripe_locks_tree structure
This infrastructure is to ensure RAID56 scrub is properly handling
recovery and P/Q scrub correctly.
This is no longer needed, before P/Q scrub we will wait for all
the involved data stripes to be scrubbed first, and RAID56 code has
internal lock to ensure no race in the same full stripe.
- function scrub_print_warning()
- function scrub_get_recover()
- function scrub_put_recover()
- function scrub_handle_errored_block()
- function scrub_setup_recheck_block()
- function scrub_bio_wait_endio()
- function scrub_submit_raid56_bio_wait()
- function scrub_recheck_block_on_raid56()
- function scrub_recheck_block()
- function scrub_recheck_block_checksum()
- function scrub_repair_block_from_good_copy()
- function scrub_repair_sector_from_good_copy()
And two more functions exported temporarily for later cleanup:
- alloc_scrub_sector()
- alloc_scrub_block()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the whole scrub path has been switched to scrub_stripe based
solution, the old writeback path can be removed completely, which
involves:
- scrub_ctx::wr_curr_bio member
- scrub_ctx::flush_all_writes member
- function scrub_write_block_to_dev_replace()
- function scrub_write_sector_to_dev_replace()
- function scrub_add_sector_to_wr_bio()
- function scrub_wr_submit()
- function scrub_wr_bio_end_io()
- function scrub_wr_bio_end_io_worker()
And one more function needs to be exported temporarily:
- scrub_sector_get()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The structure scrub_parity is used to indicate that some extents are
scrubbed for the purpose of RAID56 P/Q scrubbing.
Since the whole RAID56 P/Q scrubbing path has been replaced with new
scrub_stripe infrastructure, and we no longer need to use scrub_parity
to modify the behavior of data stripes, we can remove it completely.
This removal involves:
- scrub_parity_workers
Now only one worker would be utilized, scrub_workers, to do the read
and repair.
All writeback would happen at the main scrub thread.
- scrub_block::sparity member
- scrub_parity structure
- function scrub_parity_get()
- function scrub_parity_put()
- function scrub_free_parity()
- function __scrub_mark_bitmap()
- function scrub_parity_mark_sectors_error()
- function scrub_parity_mark_sectors_data()
These helpers are no longer needed, scrub_stripe has its bitmaps and
we can use bitmap helpers to get the error/data status.
- scrub_parity_bio_endio()
- scrub_parity_check_and_repair()
- function scrub_sectors_for_parity()
- function scrub_extent_for_parity()
- function scrub_raid56_data_stripe_for_parity()
- function scrub_raid56_parity()
The new code would reuse the scrub read-repair and writeback path.
Just skip the dev-replace phase.
And scrub_stripe infrastructure allows us to submit and wait for those
data stripes before scrubbing P/Q, without extra infrastructure.
The following two functions are temporarily exported for later cleanup:
- scrub_find_csum()
- scrub_add_sector_to_rd_bio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Implement the only missing part for scrub: RAID56 P/Q stripe scrub.
The workflow is pretty straightforward for the new function,
scrub_raid56_parity_stripe():
- Go through the regular scrub path for each data stripe
- Wait for the verification and repair to finish
- Writeback the repaired sectors to data stripes
- Make sure all stripes are properly repaired
If we have sectors unrepaired, we cannot continue, or we could further
corrupt the P/Q stripe.
- Submit the rbio for P/Q stripe
The dev-replace would be handled inside
raid56_parity_submit_scrub_rbio() path.
- Wait for the above bio to finish
Although the old code is no longer used, we still keep the declaration,
as the cleanup can be several times larger than this patch itself.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Switch scrub_simple_mirror() to the new scrub_stripe infrastructure.
Since scrub_simple_mirror() is the core part of scrub (only RAID56
P/Q stripes don't utilize it), we can get rid of a big chunk of code,
mostly scrub_extent(), scrub_sectors() and directly called functions.
There is a functionality change:
- Scrub speed throttle now only affects read on the scrubbing device
Writes (for repair and replace), and reads from other mirrors won't
be limited by the set limits.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper, queue_scrub_stripe(), would try to queue a stripe for
scrub. If all stripes are already in use, we will submit all the
existing ones and wait for them to finish.
Currently we would queue up to 8 stripes, to enlarge the blocksize to
512KiB to improve the performance. Sectors repaired on zoned need to be
relocated instead of in-place fix.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper, scrub_stripe_report_errors(), will report the result of
the scrub to system log.
The main reporting is done by introducing a new helper,
scrub_print_common_warning(), which is mostly the same content from
scrub_print_wanring(), but without the need for a scrub_block.
Since we're reporting the errors, it's the perfect time to update the
scrub stats too.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a new helper, scrub_write_sectors(), to submit write bios for
specified sectors to the target disk.
There are several differences compared to read path:
- Utilize btrfs_submit_scrub_write()
Now we still rely on the @mirror_num based writeback, but the
requirement is also a little different than regular writeback or read,
thus we have to call btrfs_submit_scrub_write().
- We cannot write the full stripe back
We can only write the sectors we have. There will be two call sites
later, one for repaired sectors, one for all utilized sectors of
dev-replace.
Thus the callers should specify their own write_bitmap.
This function only submit the bios, will not wait for them unless for
zoned case.
Caller must explicitly wait for the IO to finish.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper, scrub_stripe_read_repair_worker(), would handle the
read-repair part:
- Wait for the previous submitted read IO to finish
- Verify the contents of the stripe
- Go through the remaining mirrors, using as large blocksize as possible
At this stage, we just read out all the failed sectors from each
mirror and re-verify.
If no more failed sector, we can exit.
- Go through all mirrors again, sector-by-sector
This time, we read sector by sector, this is to address cases where
one bad sector mismatches the drive's internal checksum, and cause the
whole read range to fail.
We put this recovery method as the last resort, as sector-by-sector
reading is slow, and reading from other mirrors may have already fixed
the errors.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper, scrub_verify_stripe(), shares the same main workflow of
the old scrub code.
The major differences are:
- How pages/page_offset is grabbed
Everything can be grabbed from scrub_stripe easily.
- When error report happens
Currently the helper only verifies the sectors, not really doing any
error reporting.
The error reporting would be done after we have done the repair.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper, scrub_verify_one_metadata(), is almost the same as
scrub_checksum_tree_block().
The difference is in how we grab the pages from other structures.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper will search the extent tree to find the first extent of a
logical range, then fill the sectors array by two loops:
- Loop 1 to fill common bits and metadata generation
- Loop 2 to fill csum data (only for data bgs)
This loop will use the new btrfs_lookup_csums_bitmap() to fill
the full csum buffer, and set scrub_sector_verification::csum.
With all the needed info filled by this function, later we only need to
submit and verify the stripe.
Here we temporarily export the helper to avoid warning on unused static
function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch introduces the following structures:
- scrub_sector_verification
Contains all the needed info to verify one sector (data or metadata).
- scrub_stripe
Contains all needed members (mostly bitmap based) to scrub one stripe
(with a length of BTRFS_STRIPE_LEN).
The basic idea is, we keep the existing per-device scrub behavior, but
merge all the scrub_bio/scrub_bio into one generic structure, and read
the full BTRFS_STRIPE_LEN stripe on the first try.
This means we will read some sectors which are not scrub target, but
that's fine. At dev-replace time we only writeback the utilized and good
sectors, and for read-repair we only writeback the repaired sectors.
With every read submitted in BTRFS_STRIPE_LEN, the need for complex bio
form shaping would be gone.
Although to get the same performance of the old scrub behavior, we would
need to submit the initial read for two stripes at once.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Both scrub and read-repair are utilizing a special repair writes that:
- Only writes back to a single device
Even for read-repair on RAID56, we only update the corrupted data
stripe itself, not triggering the full RMW path.
- Requires a valid @mirror_num
For RAID56 case, only @mirror_num == 1 is valid.
For non-RAID56 cases, we need @mirror_num to locate our stripe.
- No data csum generation needed
These two call sites still have some differences though:
- Read-repair goes plain bio
It doesn't need a full btrfs_bio, and goes submit_bio_wait().
- New scrub repair would go btrfs_bio
To simplify both read and write path.
So here this patch would:
- Introduce a common helper, btrfs_map_repair_block()
Due to the single device nature, we can use an on-stack
btrfs_io_stripe to pass device and its physical bytenr.
- Introduce a new interface, btrfs_submit_repair_bio(), for later scrub
code
This is for the incoming scrub code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we're doing a lot of work for btrfs_bio:
- Checksum verification for data read bios
- Bio splits if it crosses stripe boundary
- Read repair for data read bios
However for the incoming scrub patches, we don't want this extra
functionality at all, just plain logical + mirror -> physical mapping
ability.
Thus here we do the following changes:
- Introduce btrfs_bio::fs_info
This is for the new scrub specific btrfs_bio, which would not populate
btrfs_bio::inode.
Thus we need such new member to grab a fs_info
This new member will always be populated.
- Replace @inode argument with @fs_info for btrfs_bio_init() and its
caller
Since @inode is no longer a mandatory member, replace it with
@fs_info, and let involved users populate @inode.
- Skip checksum verification and generation if @bbio->inode is NULL
- Add extra ASSERT()s
To make sure:
* bbio->inode is properly set for involved read repair path
* if @file_offset is set, bbio->inode is also populated
- Grab @fs_info from @bbio directly
We can no longer go @bbio->inode->root->fs_info, as bbio->inode can be
NULL. This involves:
* btrfs_simple_end_io()
* should_async_write()
* btrfs_wq_submit_bio()
* btrfs_use_zone_append()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
super block
There is really no need to go through the super complex scrub_sectors()
to just handle super blocks. Introduce a dedicated function to handle
super block scrubbing.
This new function will introduce a behavior change, instead of using the
complex but concurrent scrub_bio system, here we just go submit-and-wait.
There is really not much sense to care the performance of super block
scrubbing. It only has 3 super blocks at most, and they are all
scattered around the devices already.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 321f69f86a0f ("btrfs: reset device back to allocation state when
removing") included adding extent_io_tree_release(&device->alloc_state)
to btrfs_close_one_device(), which had already been called in
btrfs_free_device().
The alloc_state tree (IO_TREE_DEVICE_ALLOC_STATE), is created in
btrfs_alloc_device() and released in btrfs_close_one_device(). Therefore,
the additional call to extent_io_tree_release(&device->alloc_state) in
btrfs_free_device() is unnecessary and can be removed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During my recent search for the root cause of a reported bug, I realized
that it's a good idea to issue a warning for missed cleanup instead of
using debug-only assertions. Since most installations run with debug off,
missed cleanups and premature calls to close could go unnoticed. However,
these issues are serious enough to warrant reporting and fixing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This was only ever used by btrfs, and the usage just went away.
This effectively reverts df91f56adce1 ("libcrc32c: Add crc32c_impl
function").
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs can use various different checksumming algorithms, and prints
the one used for a given file system at mount time. Don't bother
printing the crc32c implementation at module load time, the information
is available in /sys/fs/btrfs/FSID/checksum.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The tree-log code has three almost identical copies for the accounting on
an extent_buffer that doesn't need to be written any more. The only
difference is that walk_down_log_tree passed the bytenr used to find the
buffer instead of extent_buffer.start and calculates the length using the
nodesize, while the other two callers look at the extent_buffer.len
field that must always be equivalent to the nodesize.
Factor the code into a common helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Guard all the code to punt bios to a per-cgroup submission helper by a
new CONFIG_BLK_CGROUP_PUNT_BIO symbol that is selected by btrfs.
This way non-btrfs kernel builds don't need to have this code.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
async_bio_lock is only taken from bio submission and workqueue context,
both are never in bottom halves.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
REQ_CGROUP_PUNT is a bit annoying as it is hard to follow and adds
a branch to the bio submission hot path. To fix this, export
blkcg_punt_bio_submit and let btrfs call it directly. Add a new
REQ_FS_PRIVATE flag for btrfs to indicate to it's own low-level
bio submission code that a punt to the cgroup submission helper
is required.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
punt_to_cgroup is only used by extent_write_locked_range, but that
function also directly controls the bio flags for the actual submission.
Remove th punt_to_cgroup field, and just set REQ_CGROUP_PUNT directly
in extent_write_locked_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
