summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-27ipv4: fix redirect handling for TCP packetsMichal Kubecek
Unlike ipv4_redirect() and ipv4_sk_redirect(), ip_do_redirect() doesn't call __build_flow_key() directly but via ip_rt_build_flow_key() wrapper. This leads to __build_flow_key() getting pointer to IPv4 header of the ICMP redirect packet rather than pointer to the embedded IPv4 header of the packet initiating the redirect. As a result, handling of ICMP redirects initiated by TCP packets is broken. Issue was introduced by 4895c771c ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27net: phy: fix a bug when verify the EEE supportGiuseppe CAVALLARO
The phy_init_eee has to exit with an error when the local device and its link partner both do not support EEE. So this patch fixes a problem when verify this. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementationsJussi Kivilinna
The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Julian Wollrath <jwollrath@web.de> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-27Merge tag 'samsung-fixes-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: Fixes following for v3.10 - to get usb2 working on the Chromebook with adding the usb phy node for usb2 on exynos5250 - supporting exynos4210 rev0 SoC - exynos5440 restart applying only to powered-on domains - drm-exynos probe failure with adding resource names to fimd0 platform device * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Add names to fimd0 IRQ resources ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC ARM: dts: Enabling samsung-usb2phy driver for exynos5250
2013-05-27dmaengine: ste_dma40: fix pm runtime ref countingRabin Vincent
The pm runtime reference counting of the driver is broken for the case when there is more than one transfer queued, leading to the device being runtime suspend while active. Fix it. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-27pinctrl: pinconf: take the right mutexLinus Walleij
The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan <james.hogan@imgtec.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe()Wei Yongjun
Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: exynos: Handle suspend/resume of GPIO EINT registersTomasz Figa
Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: Allow per-bank SoC-specific private dataTomasz Figa
This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: Add support for SoC-specific suspend/resume callbacksTomasz Figa
SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: Don't override the error code in probe error handlingAxel Lin
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is usedTomasz Figa
On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: exynos: Add support for set_irq_wake of wake-up EINTsTomasz Figa
This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: fix suspend/resume functionalityDoug Anderson
The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K <prathyush.k@samsung.com> but rewritten by Doug Anderson <dianders@chromium.org>. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27[media] staging/solo6x10: select the desired fontXiong Zhou
Make sure FONT_8x16 can be found by find_font(). Signed-off-by: Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] drivers/staging: davinci: vpfe: fix dependency for building the driverLad, Prabhakar
from commit 3778d05036cc7ddd983ae2451da579af00acdac2 [media: davinci: kconfig: fix incorrect selects] VIDEO_VPFE_CAPTURE was removed but there was a negative dependancy for building the DM365 VPFE MC based capture driver (VIDEO_DM365_VPFE), This patch fixes this dependency by replacing the VIDEO_VPFE_CAPTURE with VIDEO_DM365_ISIF, so as when older DM365 ISIF v4l driver is selected the newer media controller driver for DM365 isnt visible. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: pci: remove duplicate checks for EPERMLad, Prabhakar
This patch removes check for EPERM in dbg_g/s_register and vidioc_g/s_register as this check is already performed by core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: usb: remove duplicate checks for EPERM in vidioc_g/s_registerLad, Prabhakar
This patch removes check for EPERM in vidioc_g/s_register as this check is already performed by core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: dvb-frontends: remove duplicate checks for EPERM in ↵Lad, Prabhakar
dbg_g/s_register This patch removes check for EPERM in dbg_g/s_register as this check is already performed by core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: i2c: remove duplicate checks for EPERM in dbg_g/s_registerLad, Prabhakar
This patch removes check for EPERM in dbg_g/s_register of subdevice drivers as this check is already performed by core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: do not use v4l2_dev in coda_timeoutPhilipp Zabel
The timeout delayed work might be scheduled even after the v4l2 device is released. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: fix error return value if v4l2_m2m_ctx_init failsPhilipp Zabel
Use ret from the outer scope, instead of redefining it in the conditional clause. That way the error value reaches the end of the function as intended. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: set umask 0644 on debug module paramPhilipp Zabel
Otherwise module/coda/parameters/coda_debug won't show up in sysfs. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: enable dmabuf supportPhilipp Zabel
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: use devm_ioremap_resourcePhilipp Zabel
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] coda: v4l2-compliance fix: add bus_info prefix 'platform'Philipp Zabel
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] rc: gpio-ir-recv: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] timblogiw: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] bw-qcam: fix timestamp handlingHans Verkuil
bw-qcam didn't set the timestamp and it didn't set q->timestamp_type. Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: i2c: tvp7002: rearrange description of structure membersLad, Prabhakar
This patch rearranges the description of field members of struct tvp7002_config. Also as the all the fields where accepting a value either 0/1, made the members as bool. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: i2c: tvp7002: remove duplicate defineLad, Prabhakar
this patch removes duplicate #define TVP7002_MODULE_NAME form the driver file, which was also defined in media/tvp7002.h Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3Lee Jones
This patch fixes a bug introduced in the v3.10 merge window. The AB8500 External Regulator driver has recently landed upstream, which registers each of the 3 external regulators located on the AB8500. If these regulators are marked as 'always on', there is a potential for power-loss. If they're not and are seemingly unused the Regulator subsystem will attempt to disable them to save power. This causes an issue for AUX1, AUX2 and AUX3 as they obtain their power from EXT3. So we're specifying that here to prevent EXT3 from being powered down. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27ARM: ux500: Only configure wake-up reasons on ux500 based platformsLee Jones
Multiplatform calls all enabled platforms' initcalls. In the ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn executes some ux500 specific register reads/writes. When running on some !ux500 platforms this ends up causing a kernel Oops. This patch ensures the PRCMU call is only invoked when running on ux500 based platforms. Reported-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27[media] hdpvr: Removed unnecessary use of kzalloc() in get_video_info()Leonid Kegulskiy
[mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Leonid Kegulskiy <leo@lumanate.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] videodev2.h: fix typosLad, Prabhakar
This patch fixes several typos in videodev2.h file Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] sony-btf-mpx: Drop needless newline in param descriptionJean Delvare
Module parameter descriptions need not be terminated with a newline. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] sta2x11_vip: fix error return code in sta2x11_vip_init_one()Wei Yongjun
The orig code will release all the resources if v4l2_device_register() failed and return 0. But what we need in this case is to return an negative error code to let the caller known we are failed. So the patch save the return value of v4l2_device_register() to 'ret' and return it when error. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] blackfin: fix error return code in bcap_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] ad9389b: fix error return code in ad9389b_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] vpif_capture: fix error return code in vpif_probe()Wei Yongjun
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] vpif_display: fix error return code in vpif_probe()Wei Yongjun
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] v4l: vb2: fix error return code in __vb2_init_fileio()Wei Yongjun
Fix to return -EINVAL in the get kernel address error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: fix hdpvr kconfig/build errorsRandy Dunlap
Fix hdpvr build errors when CONFIG_I2C=m and VIDEO_V4L2=m and VIDEO_HDPVR=y. drivers/built-in.o: In function `hdpvr_disconnect': hdpvr-core.c:(.text+0xef542): undefined reference to `v4l2_device_disconnect' hdpvr-core.c:(.text+0xef57e): undefined reference to `i2c_del_adapter' hdpvr-core.c:(.text+0xef58a): undefined reference to `video_unregister_device' drivers/built-in.o: In function `hdpvr_delete': (.text+0xef5b9): undefined reference to `video_device_release' drivers/built-in.o: In function `hdpvr_probe': hdpvr-core.c:(.text+0xef63a): undefined reference to `v4l2_device_register' hdpvr-core.c:(.text+0xefd97): undefined reference to `i2c_del_adapter' drivers/built-in.o: In function `hdpvr_s_ctrl': hdpvr-video.c:(.text+0xf03c0): undefined reference to `v4l2_ctrl_activate' drivers/built-in.o: In function `hdpvr_device_release': hdpvr-video.c:(.text+0xf0470): undefined reference to `v4l2_device_unregister' hdpvr-video.c:(.text+0xf0479): undefined reference to `v4l2_ctrl_handler_free' hdpvr-video.c:(.text+0xf048f): undefined reference to `i2c_del_adapter' drivers/built-in.o: In function `hdpvr_open': hdpvr-video.c:(.text+0xf0570): undefined reference to `video_devdata' hdpvr-video.c:(.text+0xf057b): undefined reference to `v4l2_fh_init' hdpvr-video.c:(.text+0xf0583): undefined reference to `v4l2_fh_add' drivers/built-in.o: In function `video_drvdata': hdpvr-video.c:(.text+0xf08a0): undefined reference to `video_devdata' drivers/built-in.o: In function `vidioc_s_dv_timings': hdpvr-video.c:(.text+0xf0d34): undefined reference to `v4l_match_dv_timings' drivers/built-in.o: In function `hdpvr_poll': hdpvr-video.c:(.text+0xf1455): undefined reference to `v4l2_ctrl_poll' drivers/built-in.o: In function `hdpvr_release': hdpvr-video.c:(.text+0xf18f6): undefined reference to `v4l2_fh_release' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1be3): undefined reference to `v4l2_ctrl_handler_init_class' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c19): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c42): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c6b): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1cac): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1cd5): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o:(.text+0xf1cfe): more undefined references to `v4l2_ctrl_new_std' follow drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1d75): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1d9e): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1dc3): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1de5): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e18): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e4b): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e90): undefined reference to `v4l2_ctrl_cluster' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e98): undefined reference to `v4l2_ctrl_handler_setup' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1ec1): undefined reference to `video_device_alloc' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1f85): undefined reference to `__video_register_device' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1fac): undefined reference to `v4l2_ctrl_handler_free' drivers/built-in.o: In function `hdpvr_register_ir_tx_i2c': (.text+0xf238f): undefined reference to `i2c_new_device' drivers/built-in.o: In function `hdpvr_register_ir_rx_i2c': (.text+0xf2434): undefined reference to `i2c_new_device' drivers/built-in.o: In function `hdpvr_register_i2c_adapter': (.text+0xf2514): undefined reference to `i2c_add_adapter' drivers/built-in.o:(.rodata+0x1b368): undefined reference to `video_ioctl2' drivers/built-in.o:(.rodata+0x1b690): undefined reference to `v4l2_ctrl_log_status' drivers/built-in.o:(.rodata+0x1b6f8): undefined reference to `v4l2_ctrl_subscribe_event' drivers/built-in.o:(.rodata+0x1b700): undefined reference to `v4l2_event_unsubscribe' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27ipvs: Fix reuse connection if real server is deadGrzegorz Lyczba
Expire cached connection for new TCP/SCTP connection if real server is down. Otherwise, IPVS uses the dead server for the reused connection, instead of a new working one. Signed-off-by: Grzegorz Lyczba <grzegorz.lyczba@gmail.com> Acked-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-05-27microblaze: Reversed logic in futex cmpxchgMeyer, Kirk
futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer <kirk.meyer@sencore.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-27iwlwifi: dvm: fix zero LQ CMD sending avoidanceEmmanuel Grumbach
In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27mac80211: Allow single vif mac address change with addr_maskHelmut Schaa
When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reported-by: Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Alessandro Lannocca <alessandro.lannocca@gmail.com> Cc: Bruno Randolf <br1@thinktube.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27mac80211: close AP_VLAN interfaces before unregistering allJohannes Berg
Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27mac80211: assign AP_VLAN hw queues correctlyJohannes Berg
A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-27s390/smp: lost IPIs on cpu hotplugHeiko Carstens
IPIs might be lost when a cpu gets brought offline: When stop_machine executes its state machine there is a race window for the state STOPMACHINE_DISABLE_IRQ where the to be brought offline cpu might already have irqs disabled but a different cpu still may have irqs enabled. If the enabled cpu receives an interrupt and as a result sends an IPI to the to be offlined cpu in its bottom halve context, the IPI won't be noticed before the cpu is offline. In fact the race window is much larger since there is no guarantee when an IPI will be received. To fix this check for enqueued but not yet received IPIs in the cpu_disable() path and call the respective handlers before the cpu is marked offline. Reported-by: Juergen Doelle <juergen.doelle@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-21 19:05:54 +0000