| Age | Commit message (Collapse) | Author |
|---|
|
${version} and ${KERNELRELEASE} are the same.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
The version number with -rc should be considered older than the final
release.
For example, 6.14-rc1 should be older than 6.14, but to handle this
correctly (just like Debian kernel), "-rc" must be replace with "~rc".
$ dpkg --compare-versions 6.14-rc1 lt 6.14
$ echo $?
1
$ dpkg --compare-versions 6.14~rc1 lt 6.14
$ echo $?
0
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Correct the indentation in an example within the `modules.rst` file
to improve readability.
Signed-off-by: Kefan Liu <liukefan24s@ict.ac.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Instead of generating the vmlinux.relocs file (needed by the
decompressor build to construct the KASLR relocation tables) as a
vmlinux postlink step, which is dubious because it depends on data that
is stripped from vmlinux before the build completes, generate it from
vmlinux.unstripped, which has been introduced specifically for this
purpose.
This ensures that each artifact is rebuilt as needed, rather than as a
side effect of another build rule.
This effectively reverts commit
9d9173e9ceb6 ("x86/build: Avoid relocation information in final vmlinux")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The imperative paradigm used to build vmlinux, extract some info from it
or perform some checks on it, and subsequently modify it again goes
against the declarative paradigm that is usually employed for defining
make rules.
In particular, the Makefile.postlink files that consume their input via
an output rule result in some dodgy logic in the decompressor makefiles
for RISC-V and x86, given that the vmlinux.relocs input file needed to
generate the arch-specific relocation tables may not exist or be out of
date, but cannot be constructed using the ordinary Make dependency based
rules, because the info needs to be extracted while vmlinux is in its
ephemeral, non-stripped form.
So instead, for architectures that require the static relocations that
are emitted into vmlinux when passing --emit-relocs to the linker, and
are subsequently stripped out again, introduce an intermediate vmlinux
target called vmlinux.unstripped, and organize the reset of the build
logic accordingly:
- vmlinux.unstripped is created only once, and not updated again
- build rules under arch/*/boot can depend on vmlinux.unstripped without
running the risk of the data disappearing or being out of date
- the final vmlinux generated by the build is not bloated with static
relocations that are never needed again after the build completes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Some architectures build vmlinux with static relocations preserved, but
strip them again from the final vmlinux image. Arch specific tools
consume these static relocations in order to construct relocation tables
for KASLR.
The fact that vmlinux is created, consumed and subsequently updated goes
against the typical, declarative paradigm used by Make, which is based
on rules and dependencies. So as a first step towards cleaning this up,
introduce a Kconfig symbol to declare that the arch wants to consume the
static relocations emitted into vmlinux. This will be wired up further
in subsequent patches.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In order to introduce an intermediate, non-stripped vmlinux build that
can be used by other build steps as an input, pass the output file name
to link-vmlinux.sh via its command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 5cc124720461 ("kbuild: add CONFIG_VMLINUX_MAP expert option")
mentioned that "the .map file can be rather large (several MB), and
that's a waste of space when one isn't interested in these things."
If that is the case, generating map files for the intermediate
tmp_vmlinux* files is also a waste of space. It is unlikely that
anyone would be interested in the .tmp_vmlinux*.map files.
This commit stops passing the -Map= option when linking the .tmp_vmlinux*
intermediates.
I also hard-coded the file name 'vmlinux.map' instead of ${output}.map
because a later commit will introduce vmlinux.unstripped but I want to
keep the current name of the map file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This reverts commit 973b710b8821c3401ad7a25360c89e94b26884ac.
As I mentioned in the review [1], I do not believe this was the correct
fix.
Commit 41a00051283e ("kheaders: prevent `find` from seeing perl temp
files") addressed the root cause of the issue. I asked David to test
it but received no response.
Commit 973b710b8821 ("kheaders: Ignore silly-rename files") merely
worked around the issue by excluding such files, rather than preventing
their creation.
I have reverted the latter commit, hoping the issue has already been
resolved by the former. If the silly-rename files come back, I will
restore this change (or preferably, investigate the root cause).
[1]: https://lore.kernel.org/lkml/CAK7LNAQndCMudAtVRAbfSfnV+XhSMDcnP-s1_GAQh8UiEdLBSg@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The .rodata.(cst|str)* sections are often resized during the final
linking and since these sections do not cover actual symbols there is
no need to include them in the modules.builtin.ranges data.
When these sections were included in processing and resizing occurred,
modules were reported with ranges that extended beyond their true end,
causing subsequent symbols (in address order) to be associated with
the wrong module.
Fixes: 5f5e7344322f ("kbuild: generate offset range data for builtin modules")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Kernel build commands can sometimes be long, particularly when
cross-compiling, making them tedious to type and prone to mistypes.
This commit introduces bash completion support for common variables
and targets in Kbuild.
For installation instructions, please refer to the documentation in
Documentation/kbuild/bash-completion.rst.
The following examples demonstrate how this saves typing.
[Example 1] a long command line for cross-compiling
$ make A<TAB>
-> completes 'A' to 'ARCH='
$ make ARCH=<TAB>
-> displays all supported architectures
$ make ARCH=arm64 CR<TAB>
-> completes 'CR' to 'CROSS_COMPILE='
$ make ARCH=arm64 CROSS_COMPILE=<TAB>
-> displays installed toolchains
$ make ARCH=arm64 CROSS_COMPILE=aa<TAB>
-> completes 'CROSS_COMPILE=aa' to 'CROSS_COMPILE=aarch64-linux-gnu-'
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- def<TAB>
-> completes 'def' to 'defconfig'
[Example 2] a single build target
$ make f<TAB>
-> completes 'f' to 'fs/'
$ make fs/<TAB>
-> displays objects and sub-directories in fs/
$ make fs/xf<TAB>
-> completes 'fs/xf' to 'fs/xfs/'
$ make fs/xfs/l<TAB>
-> completes 'fs/xfs/l' to 'fs/xfs/libxfs/xfs_'
$ make fs/xfs/libxfs/xfs_g<TAB>
-> completes 'fs/xfs/libxfs/xfs_g' to 'fs/xfs/libxfs/xfs_group.o'
This does not aim to provide a complete list of variables and targets,
as there are too many. However, it covers variables and targets used
in common scenarios, and I hope this is useful enough.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Nicolas Schier <n.schier@avm.de>
|
|
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Signed-off-by: Seyediman Seyedarab <imandevel@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Without this dependency it's really puzzling when we bisect for a "bad"
commit in a series of sorttable change: when "git bisect" switches to
another commit, "make" just does nothing to vmlinux.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Fix follow warning when 'make ARCH=loongarch64 bindeb-pkg':
** ** ** WARNING ** ** **
Your architecture doesn't have its equivalent
Debian userspace architecture defined!
Falling back to the current host architecture (loong64).
Please add support for loongarch64 to ./scripts/package/mkdebian ...
Reported-by: Shiwei Liu <liushiwei@anheng.com.cn>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remap source path prefixes in all output, including compiler
diagnostics, debug information, macro expansions, etc.
This removes a few absolute paths from the binary and also makes it
possible to use core::panic::Location properly.
Equivalent to the same configuration done for C sources in
commit 1d3730f0012f ("kbuild: support -fmacro-prefix-map for external
modules") and commit a73619a845d5 ("kbuild: use -fmacro-prefix-map to
make __FILE__ a relative path").
Link: https://doc.rust-lang.org/rustc/command-line-arguments.html#--remap-path-prefix-remap-source-names-in-output
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
userprogs sometimes need access to UAPI headers.
This is currently not possible for Usermode Linux, as UM is only
a pseudo architecture built on top of a regular architecture and does
not have its own UAPI.
Instead use the UAPI headers from the underlying regular architecture.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Several drivers express optional Kconfig dependency with FOO || !FOO,
but for many choices this is not suitable: lack of stubs for !FOO
like in HWMON. Describe the second, less favorable way of optional
dependency with IS_REACHABLE by moving the code from "imply" chapter to
"Optional dependencies".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit e27128db6283 ("kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to
KBUILD_EXTRA_WARN") renamed KBUILD_ENABLE_EXTRA_GCC_CHECKS in 2019.
The migration in downstream code should be complete.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
The -fzero-init-padding-bits=all option is not a warning flag, so
defining it in scripts/Makefile.extrawarn is inconsistent.
Move it to the top-level Makefile for consistency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
|
|
The RPM packaging tools like to make sure that all packaged python
scripts have version-unambiguous shebangs. Be more specific about the
desired python version in a couple of places to avoid having to disable
these checks in make rpm-pkg.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Introduce `rustc-min-version` support function that mimics
`{gcc,clang}-min-version` ones, following commit 88b61e3bff93
("Makefile.compiler: replace cc-ifversion with compiler-specific macros").
In addition, use it in the first use case we have in the kernel (which
was done independently to minimize the changes needed for the fix).
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
No functional changes are intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The logic to retrieve the basename appears multiple times.
Factor out the common pattern into a helper function.
I copied kbasename() from include/linux/string.h and renamed it
to get_basename().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
The explicit casting from (char *) to (const char *) is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When conf_read_simple() is called with S_DEF_AUTO, it is meant to read
previous symbol values from include/config/auto.conf to determine which
include/config/* files should be touched.
This process should not modify the current symbol status in any way.
However, conf_touch_deps() currently invalidates all symbol values and
recalculates them, which is totally unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
For the ST_NORMAL state, APP is called regardless of the token type.
Factor it out.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for
future Make"), '#' in the build command is replaced with $(pound) rather
than '\#'.
Calling .replace(r'\#', '#') is only necessary when this tool is used
to parse .*.cmd files generated by Linux 4.16 or earlier, which is
unlikely to happen.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Commit f77bf01425b1 ("kbuild: introduce ccflags-y, asflags-y and
ldflags-y") deprecated these in 2007. The migration should have been
completed by now.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Using dwarf_getscopes_die to resolve fully-qualified names turns out to
be rather slow, and also results in duplicate scopes being processed,
which doesn't help. Simply adding an extra pass to resolve names for all
DIEs before processing exports is noticeably faster.
For the object files with the most exports in a defconfig+Rust build,
the performance improvement is consistently >50%:
rust/bindings.o: 1038 exports
before: 9.5980 +- 0.0183 seconds time elapsed ( +- 0.19% )
after: 4.3116 +- 0.0287 seconds time elapsed ( +- 0.67% )
rust/core.o: 424 exports
before: 5.3584 +- 0.0204 seconds time elapsed ( +- 0.38% )
after: 0.05348 +- 0.00129 seconds time elapsed ( +- 2.42% )
^ Not a mistake.
net/core/dev.o: 190 exports
before: 9.0507 +- 0.0297 seconds time elapsed ( +- 0.33% )
after: 3.2882 +- 0.0165 seconds time elapsed ( +- 0.50% )
rust/kernel.o: 129 exports
before: 6.8571 +- 0.0317 seconds time elapsed ( +- 0.46% )
after: 2.9096 +- 0.0316 seconds time elapsed ( +- 1.09% )
net/core/skbuff.o: 120 exports
before: 5.4805 +- 0.0291 seconds time elapsed ( +- 0.53% )
after: 2.0339 +- 0.0231 seconds time elapsed ( +- 1.14% )
drivers/gpu/drm/display/drm_dp_helper.o: 101 exports
before: 1.7877 +- 0.0187 seconds time elapsed ( +- 1.05% )
after: 0.69245 +- 0.00994 seconds time elapsed ( +- 1.44% )
net/core/sock.o: 97 exports
before: 5.8327 +- 0.0653 seconds time elapsed ( +- 1.12% )
after: 2.0784 +- 0.0291 seconds time elapsed ( +- 1.40% )
drivers/net/phy/phy_device.o: 95 exports
before: 3.0671 +- 0.0371 seconds time elapsed ( +- 1.21% )
after: 1.2127 +- 0.0207 seconds time elapsed ( +- 1.70% )
drivers/pci/pci.o: 93 exports
before: 1.1130 +- 0.0113 seconds time elapsed ( +- 1.01% )
after: 0.4848 +- 0.0127 seconds time elapsed ( +- 2.63% )
kernel/sched/core.o: 83 exports
before: 3.5092 +- 0.0223 seconds time elapsed ( +- 0.64% )
after: 1.1231 +- 0.0145 seconds time elapsed ( +- 1.29% )
Overall, a defconfig+DWARF5 build with gendwarfksyms and Rust is 14.8%
faster with this patch applied on my test system. Without Rust, there's
still a 10.4% improvement in build time when gendwarfksyms is used.
Note that symbol versions are unchanged with this patch.
Suggested-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use the specified $(LD) when building userprogs with Clang
- Pass the correct target triple when compile-testing UAPI headers
with Clang
- Fix pacman-pkg build error with KBUILD_OUTPUT
* tag 'kbuild-fixes-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT
docs: Kconfig: fix defconfig description
kbuild: hdrcheck: fix cross build with clang
kbuild: userprogs: use correct lld when linking through clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues. These
contain:
- typec driver fixes
- dwc3 driver fixes
- xhci driver fixes
- renesas controller fixes
- gadget driver fixes
- a new USB quirk added
All of these have been in linux-next with no reported issues"
* tag 'usb-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer access
usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader
usb: xhci: Fix host controllers "dying" after suspend and resume
usb: dwc3: Set SUSPENDENABLE soon after phy init
usb: hub: lack of clearing xHC resources
usb: renesas_usbhs: Flush the notify_hotplug_work
usb: renesas_usbhs: Use devm_usb_get_phy()
usb: renesas_usbhs: Call clk_put()
usb: dwc3: gadget: Prevent irq storm when TH re-executes
usb: gadget: Check bmAttributes only if configuration is valid
xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hosts
usb: xhci: Enable the TRB overfetch quirk on VIA VL805
usb: gadget: Fix setting self-powered state on suspend
usb: typec: ucsi: increase timeout for PPM reset operations
acpi: typec: ucsi: Introduce a ->poll_cci method
usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality
usb: gadget: Set self-powered based on MaxPower and bmAttributes
usb: gadget: u_ether: Set is_suspend flag if remote wakeup fails
usb: atm: cxacru: fix a flaw in existing endpoint checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that resolves a reported memory leak.
It's been in linux-next for 2 weeks now with no reported problems"
* tag 'driver-core-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: fix device leak in __fw_devlink_relax_cycles()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
|
|
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
|
|
into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #4
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 fixes from Ingo Molnar:
- Add more model IDs to the AMD microcode version check, more people
are hitting these checks
- Fix a Xen guest boot warning related to AMD northbridge setup
- Fix SEV guest bugs related to a recent changes in its locking logic
- Fix a missing definition of PTRS_PER_PMD that assembly builds can hit
* tag 'x86-urgent-2025-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add some forgotten models to the SHA check
x86/mm: Define PTRS_PER_PMD for assembly code too
virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex
virt: sev-guest: Allocate request data dynamically
x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range()
|
|
Add some more forgotten models to the SHA check.
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Link: https://lore.kernel.org/r/20250307220256.11816-1-bp@kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs in kernel build, hibernation, memory management and KVM"
* tag 'loongarch-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix GPA size issue about VM
LoongArch: KVM: Reload guest CSR registers after sleep
LoongArch: KVM: Add interrupt checking for AVEC
LoongArch: Set hugetlb mmap base address aligned with pmd size
LoongArch: Set max_pfn with the PFN of the last page
LoongArch: Use polling play_dead() when resuming from hibernation
LoongArch: Eliminate superfluous get_numa_distances_cnt()
LoongArch: Convert unreachable() to BUG()
|
|
Physical address space is 48 bit on Loongson-3A5000 physical machine,
however it is 47 bit for VM on Loongson-3A5000 system. Size of physical
address space of VM is the same with the size of virtual user space (a
half) of physical machine.
Variable cpu_vabits represents user address space, kernel address space
is not included (user space and kernel space are both a half of total).
Here cpu_vabits, rather than cpu_vabits - 1, is to represent the size of
guest physical address space.
Also there is strict checking about page fault GPA address, inject error
if it is larger than maximum GPA address of VM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On host, the HW guest CSR registers are lost after suspend and resume
operation. Since last_vcpu of boot CPU still records latest vCPU pointer
so that the guest CSR register skips to reload when boot CPU resumes and
vCPU is scheduled.
Here last_vcpu is cleared so that guest CSR registers will reload from
scheduled vCPU context after suspend and resume.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
There is a newly added macro INT_AVEC with CSR ESTAT register, which is
bit 14 used for LoongArch AVEC support. AVEC interrupt status bit 14 is
supported with macro CSR_ESTAT_IS, so here replace the hard-coded value
0x1fff with macro CSR_ESTAT_IS so that the AVEC interrupt status is also
supported by KVM.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With ltp test case "testcases/bin/hugefork02", there is a dmesg error
report message such as:
kernel BUG at mm/hugetlb.c:5550!
Oops - BUG[#1]:
CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ #241
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940
a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000
a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000
t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000
t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001
t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280
s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10
s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08
ra: 9000000000485538 unmap_vmas+0x130/0x218
ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64)
Call Trace:
[<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0
[<9000000000485534>] unmap_vmas+0x12c/0x218
[<9000000000494068>] exit_mmap+0xe0/0x308
[<900000000025fdc4>] mmput+0x74/0x180
[<900000000026a284>] do_exit+0x294/0x898
[<900000000026aa30>] do_group_exit+0x30/0x98
[<900000000027bed4>] get_signal+0x83c/0x868
[<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0
[<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138
[<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4
The problem is that base address allocated from hugetlbfs is not aligned
with pmd size. Here add a checking for hugetlbfs and align base address
with pmd size. After this patch the test case "testcases/bin/hugefork02"
passes to run.
This is similar to the commit 7f24cbc9c4d42db8a3c8484d1 ("mm/mmap: teach
generic_get_unmapped_area{_topdown} to handle hugetlb mappings").
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The current max_pfn equals to zero. In this case, it causes user cannot
get some page information through /proc filesystem such as kpagecount.
The following message is displayed by stress-ng test suite with command
"stress-ng --verbose --physpage 1 -t 1".
# stress-ng --verbose --physpage 1 -t 1
stress-ng: error: [1691] physpage: cannot read page count for address 0x134ac000 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x7ffff207c3a8 in /proc/kpagecount, errno=22 (Invalid argument)
stress-ng: error: [1691] physpage: cannot read page count for address 0x134b0000 in /proc/kpagecount, errno=22 (Invalid argument)
...
After applying this patch, the kernel can pass the test.
# stress-ng --verbose --physpage 1 -t 1
stress-ng: debug: [1701] physpage: [1701] started (instance 0 on CPU 3)
stress-ng: debug: [1701] physpage: [1701] exited (instance 0 on CPU 3)
stress-ng: debug: [1700] physpage: [1701] terminated (success)
Cc: stable@vger.kernel.org # 6.8+
Fixes: ff6c3d81f2e8 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue
enabled, the idle_task's stack may different between the booting kernel
and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU
IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the
interrupt handler. But since the stack pointer is changed, the interrupt
handler cannot restore correct context.
So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it
as the default version of play_dead(), and the new arch_cpu_idle_dead()
call play_dead() directly. For hibernation, implement an arch-specific
hibernate_resume_nonboot_cpu_disable() to use the polling version (idle
instruction is replace by nop, and irq is disabled) of play_dead(), i.e.
poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack
when resuming from hibernation.
This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 /
hibernate: Use hlt_play_dead() when resuming from hibernation").
Cc: stable@vger.kernel.org
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In LoongArch, get_numa_distances_cnt() isn't in use, resulting in a
compiler warning.
Fix follow errors with clang-18 when W=1e:
arch/loongarch/kernel/acpi.c:259:28: error: unused function 'get_numa_distances_cnt' [-Werror,-Wunused-function]
259 | static inline unsigned int get_numa_distances_cnt(struct acpi_table_slit *slit)
| ^~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Link: https://lore.kernel.org/all/Z7bHPVUH4lAezk0E@kernel.org/
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When compiling on LoongArch, there exists the following objtool warning
in arch/loongarch/kernel/machine_kexec.o:
kexec_reboot() falls through to next function crash_shutdown_secondary()
Avoid using unreachable() as it can (and will in the absence of UBSAN)
generate fall-through code. Use BUG() so we get a "break BRK_BUG" trap
(with unreachable annotation).
Cc: stable@vger.kernel.org # 6.12+
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
