summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-11xen/pci: Shuffle code around.Konrad Rzeszutek Wilk
The file is hard to read. Move the code around so that the contents of it follows a uniform format: - setup GSIs - PV, HVM, and initial domain case - then MSI/MSI-x setup - PV, HVM and then initial domain case. - then MSI/MSI-x teardown - same order. - lastly, the __init functions in PV, HVM, and initial domain order. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-11Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc"Alex Elder
This reverts commit 7a249cf83da1813cfa71cfe1e265b40045eceb47. That commit created a situation that could lead to a filesystem hang. As Dave Chinner pointed out, xfs_trans_alloc() could hold a reference to m_active_trans (i.e., keep it non-zero) and then wait for SB_FREEZE_TRANS to complete. Meanwhile a filesystem freeze request could set SB_FREEZE_TRANS and then wait for m_active_trans to drop to zero. Nobody benefits from this sequence of events... Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-11x86, ioapic: Also print Dest fieldNaga Chumbalkar
The code in setup_ioapic_irq() determines the Destination Field, so why not also include it in the debug printk output that gets displayed when the boot parameter "apic=debug" is used. Before the change, "dmesg" will show: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) ... After the change, you will see: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184603.2734.91071.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11x86, ioapic: Format clean up for IOAPIC outputNaga Chumbalkar
When IOAPIC data is displayed in "dmesg" with the help of the boot parameter "apic=debug" certain values are not formatted correctly wrt their size. In the "dmesg" snippet below, note that the output for "max redirection entries", and "IO APIC version" which are each defined to be just 8-bits long are displayed as 2 bytes in length. Similarly, "Dst" under the "IRQ redirection table" should only be 8-bits long. IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 ... ... Do some formatting clean up, so you will see output like below: IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 31 02 00 0 0 0 0 0 0 0 30 03 00 1 0 0 0 0 0 0 33 ... ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184557.2734.61830.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11x86: Disable AMD_NUMA for 32bit for nowTejun Heo
Commit 2706a0bf7b ("x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too") enabled AMD NUMA for 32bit too. Unfortunately, SPARSEMEM on 32bit had rather coarse (512MiB) addr->node mapping granularity due to lack of space in page->flags. This led to boot failure on certain AMD NUMA machines which had 128MiB alignment on nodes. Patches to properly detect this condition and reject NUMA configuration are posted[1] but deemed too pervasive for merge at this point (-rc6). Disable AMD NUMA for 32bit for now and re-enable once the detection logic is merged. [1] http://thread.gmane.org/gmane.linux.kernel/1161279/focus=1162583 Reported-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Conny Seidel <conny.seidel@amd.com> Link: http://lkml.kernel.org/r/20110711083432.GC943@htj.dyndns.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not definedSteven Rostedt
The struct ftrace_hash was declared within CONFIG_FUNCTION_TRACER but was referenced outside of it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-11hp-wmi: fix use after freeEric Dumazet
[ 191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14) [ 191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000 [ 191.310020] i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f [ 191.310027] ^ [ 191.310029] [ 191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h [ 191.310036] EIP: 0060:[<f80b3104>] EFLAGS: 00010286 CPU: 0 [ 191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi] [ 191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce [ 191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c [ 191.310045] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0 [ 191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 191.310050] DR6: ffff4ff0 DR7: 00000400 [ 191.310051] [<f80b317b>] hp_wmi_dock_state+0x2b/0x40 [hp_wmi] [ 191.310054] [<f80b6093>] hp_wmi_init+0x93/0x1a8 [hp_wmi] [ 191.310057] [<c10011f0>] do_one_initcall+0x30/0x170 [ 191.310061] [<c107ab9f>] sys_init_module+0xef/0x1a60 [ 191.310064] [<c149f998>] sysenter_do_call+0x12/0x28 [ 191.310067] [<ffffffff>] 0xffffffff Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-11dell-laptop - using buffer without mutex_lockJose Alonso
Using buffer->output[1] without mutex_lock() Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-11Revert: "dell-laptop: Toggle the unsupported hardware killswitch"Keng-Yu Lin
This reverts commit a3d77411e8b2ad661958c1fbee65beb476ec6d70, as it causes a mess in the wireless rfkill status on some models. It is probably a bad idea to toggle the rfkill for all dell models without the respect to the claim that it is hardware-controlled. Cc: stable@kernel.org Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-11dlm: keep lkbs in idrDavid Teigland
This is simpler and quicker than the hash table, and avoids needing to search the hash list for every new lkid to check if it's used. Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-11dlm: fix kmalloc argsDavid Teigland
The gfp and size args were switched. Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-11dlm: don't do pointless NULL check, use kzalloc and fix order of argumentsJesper Juhl
In fs/dlm/lock.c in the dlm_scan_waiters() function there are 3 small issues: 1) There's no need to test the return value of the allocation and do a memset if is succeedes. Just use kzalloc() to obtain zeroed memory. 2) Since kfree() handles NULL pointers gracefully, the test of 'warned' against NULL before the kfree() after the loop is completely pointless. Remove it. 3) The arguments to kmalloc() (now kzalloc()) were swapped. Thanks to Dr. David Alan Gilbert for pointing this out. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-11ALSA: hda - Turn on extra EAPDs on Conexant codecsTakashi Iwai
Some machines seem to use EAPD control of the unused pin for controlling the overall EAPD. Since the driver currently doesn't check the EAPD of unused pins, the EAPD isn't enabled. For avoiding such a problem, turn all extra EAPDs on as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11HID: uclogic: Add support for UC-Logic WP1062Nikolai Kondrashov
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor. This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add sysfs support to wiimote driverDavid Herrmann
Add sysfs files for each led of the wiimote. Writing 1 to the file enables the led and 0 disables the led. We do not need memory barriers when checking wdata->ready since we use a spinlock directly after it. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Cache wiimote led stateDavid Herrmann
Save the current state of the leds in the wiimote data structure. This allows us to discard new led requests that wouldn't change anything. Protect the whole state structure by a spinlock. Every wiiproto_* function expects this spinlock to be held when called. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote led requestDavid Herrmann
Add new request that sets the leds on the target device. Also, per default, set led1 after initializing a device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote input button parserDavid Herrmann
Parse input report 0x30 from the wiimote as button input. We need to send events for all buttons on every input report because the wiimote does not send events for single buttons but always for all buttons to us. The input layer, however, filters redundant events. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote event handlerDavid Herrmann
Create array of all event handlers and call each handler when we receive the related event. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add output queue for wiimote driverDavid Herrmann
The raw hid output function that is supported by bluetooth low-level hid driver does not provide an output queue and also may sleep. The wiimote driver, though, may need to send data in atomic context so this patch adds a buffered output queue for the wiimote driver. We use the shared workqueue to send our buffer to the hid device. There is always only one active worker which flushes the whole output queue to the device. If our queue is full, every further output is discarded. Special care is needed in the deinitialization routine. When wiimote_hid_remove is called, HID input is already disabled, but HID output may still be used from our worker and is then discarded by the lower HID layers. Therefore, we can safely disable the input layer since it is the only layer that still sends input events. Future sysfs attributes must be freed before unregistering input to avoid the sysfs handlers to send input events to a non-existing input layer. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote send functionDavid Herrmann
The wiimote driver needs to send raw output reports to the wiimote device. Otherwise we could not manage the peripherals of the wiimote or perform memory operations on the wiimote. We cannot use hidinput_input_event of the lowlevel hid driver, since this does not accept raw input. Therefore, we need to use the same function that hidraw uses to send output. Side effect is, the raw output function is not buffered and can sleep. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Synchronize wiimote input and hid event handlingDavid Herrmann
The wiimote first starts HID hardware and then registers the input device. We need to synchronize the startup so no event handler will start parsing events when the wiimote device is not ready, yet. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register input device in wiimote hid driverDavid Herrmann
Register input device so the wiimote can report input events on it. We do not use HIDINPUT because the wiimote does not provide any descriptor table which might be used by HIDINPUT. So we avoid having HIDINPUT parse the wiimote descriptor and create unrelated or unknown event flags. Instead we register our own input device that we have full control of. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add wiimote device structureDavid Herrmann
Allocate wiimote device structure with all wiimote related data when registering new wiimote devices. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Register wiimote hid driver stubDavid Herrmann
The wiimote uses a fake HID protocol. Hence, we need to prevent HIDINPUT and HIDDEV from parsing wiimote data and instead parse raw hid events. Add VID/PID to hid-core so the special driver is loaded on new wiimotes. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11HID: wiimote: Add Nintendo Wii Remote driver stubDavid Herrmann
Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11doc: Kconfig: `to be' -> `be'Michael Witten
Also, a comma was inserted to offset a modifier. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11doc: Kconfig: Typo: square -> squaredMichael Witten
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11doc: Konfig: Documentation/power/{pm => apm-acpi}.txtMichael Witten
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11drivers/net: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for drivers/net/usb/kalmia.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11Merge branch 'master' into for-nextJiri Kosina
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-11drivers/media: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for drivers/media/video/omap/omap_vout.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11drivers/i2c: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for drivers/i2c/busses/i2c-omap.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11XTENSA: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/xtensa/variants/s6000/include/variant/dmac.h This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11SH: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/sh/* This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11MIPS: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/mips/include/asm/mach-jz4740/gpio.h This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Also a few tiny whitespace changes. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11ARM: static should be at beginning of declarationJesper Juhl
Make sure that the 'static' keywork is at the beginning of declaration for arch/arm/mach-shmobile/board-ap4evb.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11ALSA: hda - Preserve input pin-ctl bits in HP-automute for VIA codecTakashi Iwai
For smart51 pins, we need to preserve the input pin-control bits at auto-mute controls instead of overwriting zero or pin-out-only. Otherwise the VREF won't be set properly when smart51 is disabled again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11ALSA: hda - Set line-out pin-ctls properly when indep-HP mode changesTakashi Iwai
When Independent-HP mode is changed for VIA, the driver needs to re-issue the auto-mute check so that the line-out pins are set properly without influence of HP pin state. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11Merge branch 'prcm-fixes-3.1' of git://git.pwsan.com/linux-2.6 into fixes-part-2Tony Lindgren
2011-07-11ASoC: omap: McBSP: fix build breakage on OMAP1Paul Walmsley
After commits d13586574d373ef40acd4725c9a269daa355e412 ("OMAP: McBSP: implement functional clock switching via clock framework") and cf4c87abe238ec17cd0255b4e21abd949d7f811e ("OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c"), any OMAP1 board (such as the AMS Delta) that uses the ASoC McBSP driver will no longer build: sound/built-in.o: In function `omap_mcbsp_dai_set_dai_sysclk': last.c:(.text+0x24ff8): undefined reference to `omap2_mcbsp1_mux_clkr_src' last.c:(.text+0x2500c): undefined reference to `omap2_mcbsp1_mux_fsr_src' make: *** [vmlinux] Error 1 Fix by defining three OMAP1-only dummy functions for omap2_mcbsp1_mux_clkr_src(), omap2_mcbsp1_mux_fsr_src(), and omap2_mcbsp_set_clks_src(). Normally, code that is OMAP SoC-revision-specific like this should go under the arch/arm/*omap* directories, and get abstracted away from drivers via struct platform_data function pointers. This doesn't work in this case since there doesn't appear to be any convenient way to access struct platform_data (or something like it) in the current design of the sound/soc/omap/omap-mcbsp.c driver. Reported by Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> and Tony Lindgren <tony@atomide.com>. Janusz also posted a patch to fix this at: http://www.spinics.net/lists/linux-omap/msg39560.html (among other places), but the following approach seems less dependent on compiler behavior. This patch passes build tests for ams_delta_defconfig and omap2plus_defconfig, but since I don't have an AMS Delta here, I can't boot test it on that platform. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Tony Lindgren <tony@atomide.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-11PM: Reintroduce dropped call to check_wakeup_irqsColin Cross
Patch 2e711c04dbbf7a7732a3f7073b1fc285d12b369d (PM: Remove sysdev suspend, resume and shutdown operations) deleted sysdev_suspend(), which was being relied on to call check_wakeup_irqs() in suspend. If check_wakeup_irqs() is not called, wake interrupts that are pending when suspend is entered may be lost. It also breaks IRQCHIP_MASK_ON_SUSPEND, which is handled in check_wakeup_irqs(). This patch adds a call to check_wakeup_irqs() in syscore_suspend(), similar to what was deleted in sysdev_suspend(). Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-11ipv4: Use universal hash for ARP.David S. Miller
We need to make sure the multiplier is odd. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11ALSA: hda - Via Fix speaker-mute checks in VIA driverTakashi Iwai
When the line-jack is plugged/unplugged, the driver must check also the headphone jack state in addition to the line-out jack. Currently it checks only the line-out state and ignores the headphone. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-11neigh: Store hash shift instead of mask.David S. Miller
And mask the hash function result by simply shifting down the "->hash_shift" most significant bits. Currently which bits we use is arbitrary since jhash produces entropy evenly across the whole hash function result. But soon we'll be using universal hashing functions, and in those cases more entropy exists in the higher bits than the lower bits, because they use multiplies. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11pcmcia: pxa2xx/trizeps4: remove unnecessary ifdefsJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: scoop: drop pcmcia_init callbackDmitry Eremin-Solenikov
A pcmcia_init callback isn't used on any of the platforms. Drop it. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/mioa701: use gpio arrays for global and gsm gpiosPhilipp Zabel
gpio_request_array() / gpio_free_array() are functional replacements for mio_gpio_request() / mio_gpio_free(), which are now obsolete. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/hx4700: use gpio arrays for global gpiosPhilipp Zabel
gpio_request_array() is a functional replacement for hx4700_gpio_request(), which is now obsolete. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/magician: use gpio arrays for backlight and global gpiosPhilipp Zabel
Use gpio_request_array() / gpio_free_array() in backlight init and exit functions and global gpio initialization. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-24 05:26:34 +0000