| Age | Commit message (Collapse) | Author |
|---|
|
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-0-02f1753e8303@suse.cz/
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are cases where a session is disconnected and password has changed
on the server (or expired) for this user and this currently can not
be fixed without unmount and mounting again. This patch allows
remount to change the password (for the non Kerberos case, Kerberos
ticket refresh is handled differently) when the session is disconnected
and the user can not reconnect due to still using old password.
Future patches should also allow us to setup the keyring (cifscreds)
to have an "alternate password" so we would be able to change
the password before the session drops (without the risk of races
between when the password changes and the disconnect occurs -
ie cases where the old password is still needed because the new
password has not fully rolled out to all servers yet).
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cases of large directories, the readdir operation may span multiple
round trips to retrieve contents. This introduces a potential race
condition in case of concurrent write and readdir operations. If the
readdir operation initiates before a write has been processed by the
server, it may update the file size attribute to an older value.
Address this issue by avoiding file size updates from readdir when we
have read/write lease.
Scenario:
1) process1: open dir xyz
2) process1: readdir instance 1 on xyz
3) process2: create file.txt for write
4) process2: write x bytes to file.txt
5) process2: close file.txt
6) process2: open file.txt for read
7) process1: readdir 2 - overwrites file.txt inode size to 0
8) process2: read contents of file.txt - bug, short read with 0 bytes
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add i.MX95 Generic/ELE/V2X MU support, its register layout is same as
i.MX8ULP, but the Parameter registers would show different
TR/RR. Since the driver already supports get TR/RR from Parameter
registers, not hardcoding the number, this patch just add
the compatible entry to reuse i.MX8ULP S4 cfg data.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Some MUs such as i.MX95 MU, have internal SRAM which could be used
for SCMI shared memory, so populate the sub-nodes to use the SRAM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
i.MX8ULP, i.MX93 MU has a Parameter register encoded as below:
BIT: 15 --- 8 | 7 --- 0
RR_NUM TR_NUM
So to make driver easy to support more variants, get the RR/TR
registers number from Parameter register.
The patch only adds support the specific MU, such as ELE MU.
For generic MU, not add support for number larger than 4.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There will be changes that init may fail, so adding return value for
init function.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add i.MX95 Generic, Secure Enclave and V2X Message Unit compatible string.
And the MUs in AONMIX has internal RAMs for SCMI shared buffer usage.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
IST3032C (and possibly some other models) has touch keys. Add support
for them to the imagis driver.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-3-2c429afa8420@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
IST3032C (and possibly some other models) has touch keys. Document this.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-2-2c429afa8420@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of manually extracting certain bits from registers with binary
ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the
*_SHIFT macros can be dropped.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-1-2c429afa8420@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the input_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-input-v1-1-0c3d950c25db@marliere.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A compiler warning related to sizeof(int) != 8 when calling do_div()
is triggered when building on 32-bit platforms.
Address this by using integer types having a well-defined size.
Fixes: 3ce485803da1 ("mtd: ubi: provide NVMEM layer over UBI volumes")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
|
|
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240309212025.13758-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When a dirent points to a missing inode, we really should print out the
dirent.
This requires quite a bit of refactoring, but there's some other
benefits: we now do the entire looup (dirent and inode) in a single
btree transaction, and copy to the VFS inode with btree locks still
held, like the create path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Introduce PF_MEMALLOC_* equivalents of some GFP_ flags:
PF_MEMALLOC_NORECLAIM -> GFP_NOWAIT
PF_MEMALLOC_NOWARN -> __GFP_NOWARN
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-mm@kvack.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Our proliferation of memalloc_*_{save,restore} APIs is getting a bit
silly, this adds a generic version and converts the existing
save/restore functions to wrappers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-mm@kvack.org
Acked-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Going to be adding more code here for checking subvol structure.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Repurposing standard error codes in bcachefs code is banned in new code,
and we need to get rid of the remaining ones - private error codes give
us much better error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
WQ_UNBOUND with max_active 1 means ordered workqueue, but we don't
actually need or want ordered semantics - and probably want a higher
concurrency limit anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Need to fix this oversight for the new FS_IOC_(GET|SET)UUID ioctls.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
switch the statfs code from something horrible and open coded to the
more standard uuid_to_fsid()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Files within a subvolume cannot be renamed into another subvolume, but
subvolumes themselves were intended to be.
This implements subvolume renaming - we need to ensure that there's only
a single dirent that points to a subvolume key (not multiple versions in
different snapshots), and we need to ensure that dirent.d_parent_subol
and inode.bi_parent_subvol are updated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_and_journal_iter is old code that we want to get rid of, but we're
not ready to yet.
lack of btree node prefetching is, it turns out, a real performance
issue for fsck on spinning rust, so - add it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we now always have a btree_trans when using a btree_and_journal_iter;
prep work for adding prefetching to btree_and_journal_iter
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently a severe performance regression was discovered, which bisected
to
a6548c8b5eb5 bcachefs: Avoid flushing the journal in the discard path
It turns out the old behaviour, which issued excessive journal flushes,
worked around a performance issue where queueing delays would cause the
journal to not be able to write quickly enough and stall.
The journal flushes masked the issue because they periodically flushed
the device write cache, reducing write latency for non flushes.
This patch reworks the journalling code to allow more than one
(non-flush) write to be in flight at a time. With this patch, doing 4k
random writes and an iodepth of 128, we are now able to hit 560k iops to
a Samsung 970 EVO Plus - previously, we were stuck in the ~200k range.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for having multiple journal writes in flight.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for having multiple journal writes in flight.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This gives us a way to record the date and time every journal entry was
written - useful for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Eliminates some error paths - no longer have a hardcoded
BCH_REPLICAS_MAX limit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Drop an unnecessary bch2_subvolume_get_snapshot() call, and drop the __
from the name - this is a normal interface.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Minor renaming for clarity, bit of refactoring.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Most bcachefs workqueues are used for completions, and should be
WQ_HIGHPRI - this helps reduce queuing delays, we want to complete
quickly once we can no longer signal backpressure by blocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For DT_SUBVOL, we now print both parent and child subvol IDs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, any time we failed to get a journal reservation we'd retry,
with the journal lock held; but this isn't necessary given
wait_event()/wake_up() ordering.
This avoids performance cliffs when the journal starts to get backed up
and lock contention shoots up.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want journal write completions to be blocked behind btree
transactions - io_complete_wq is used for btree updates after data and
metadata writes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we are checking whether a subvolume is empty in the specified snapshot,
entries that do not belong to this subvolume should be skipped.
This fixes the following case:
$ bcachefs subvolume create ./sub
$ cd sub
$ bcachefs subvolume create ./sub2
$ bcachefs subvolume snapshot . ./snap
$ ls -a snap
. ..
$ rmdir snap
rmdir: failed to remove 'snap': Directory not empty
As Kent suggested, we pass 0 in may_delete_deleted_inode() to ignore subvols
in the subvol we are checking, because inode.bi_subvol is only set on
subvolume roots, and we can't go through every inode in the subvolume and
change bi_subvol when taking a snapshot. It makes the check less strict, but
that's ok, the rest of fsck will still catch it.
Signed-off-by: Guoyu Ou <benogy@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were failing to set path->uptodate when reaching the end of a btree
node iterator, causing the new prefetch code for backpointers gc to go
into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
validate_bset_keys() never properly validated k->u64s; it checked if it
was 0, but not if it was smaller than keys for the given packed format;
this fixes that small oversight.
This patch was backported, so it's adding quite a few error enums so
that they don't get renumbered and we don't have confusing gaps.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't know where the superblock and journal lives on offline devices;
that means if a device is offline fsck can't check those buckets.
Previously, fsck would incorrectly clear bucket data types for those
buckets on offline devices; now we just use the previous state.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
