summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-07tg3: Fix phylib locking strategyMatt Carlson
Felix Radensky noted that chip resets were generating stack trace dumps. This is because the driver is attempting to acquire the mdio bus mutex while holding the tp->lock spinlock. The fix is to change the code such that every phy access takes the tp->lock spinlock instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07rndis_host: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07futex: Fix typo in FUTEX_WAIT/WAKE_BITSET_PRIVATE definitionsAnton Blanchard
Looks like a typo, FUTEX_WAKE_BITS should be FUTEX_WAIT_BITSET. Signed-off-by: Anton Blanchard <anton@samba.org> LKML-Reference: <20091007001358.GE16073@kryten> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-07ipv4: arp_notify address list bugStephen Hemminger
This fixes a bug with arp_notify. If arp_notify is enabled, kernel will crash if address is changed and no IP address is assigned. http://bugzilla.kernel.org/show_bug.cgi?id=14330 Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07Blackfin: fix missed cache config renamesGraf Yang
Looks like the big Kconfig cache split/rename missed one spot in the SMP cache lock headers. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: cplbinfo: drop d_path() hacksMike Frysinger
The cplbinfo was using d_path() to figure out which cpu/cplb was being parsed. As Al pointed out, this isn't exactly reliable as it assumes the static VFS path to be unchanged, and it's just poor form. So use the proc_create_data() to properly (and internally) pass the exact cpu/cplb requested to the parser function. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly definesMike Frysinger
The asm/irq.h header uses anomaly defines, but doesn't make sure to explicitly include the anomaly header for them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: BF51x: add PTP MMR definesBarry Song
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: convert to use arch_gettimeoffset()john stultz
Convert Blackfin to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. I've taken my best swing at converting this, but I'm not 100% confident I got it right. My cross-compiler is now out of date (gcc4.2) so I wasn't able to check if it compiled. Any assistance from arch maintainers or testers to get this merged would be great. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07rcu: Place root rcu_node structure in separate lockdep classPaul E. McKenney
Before this patch, all of the rcu_node structures were in the same lockdep class, so that lockdep would complain when rcu_preempt_offline_tasks() acquired the root rcu_node structure's lock while holding one of the leaf rcu_nodes' locks. This patch changes rcu_init_one() to use a separate spin_lock_init() for the root rcu_node structure's lock than is used for that of all of the rest of the rcu_node structures, which puts the root rcu_node structure's lock in its own lockdep class. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12548908983277-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07rcu: Make hot-unplugged CPU relinquish its own RCU callbacksPaul E. McKenney
The current interaction between RCU and CPU hotplug requires that RCU block in CPU notifiers waiting for callbacks to drain. This can be greatly simplified by having each CPU relinquish its own callbacks, and for both _rcu_barrier() and CPU_DEAD notifiers to adopt all callbacks that were previously relinquished. This change also eliminates the possibility of certain types of hangs due to the previous practice of waiting for callbacks to be invoked from within CPU notifiers. If you don't every wait, you cannot hang. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1254890898456-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07rcu: Move rcu_barrier() to rcutreePaul E. McKenney
Move the existing rcu_barrier() implementation to rcutree.c, consistent with the fact that the rcu_barrier() implementation is tied quite tightly to the RCU implementation. This opens the way to simplify and fix rcutree.c's rcu_barrier() implementation in a later patch. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12548908982563-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-06gigaset: add kerneldoc commentsTilman Schmidt
Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: correct debugging output selectionTilman Schmidt
Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: improve error recoveryTilman Schmidt
When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix device ERROR response handlingTilman Schmidt
Clear out pending command that got rejected with 'ERROR' response. This fixes the bug where unloading the driver module would hang with the message: "gigaset: not searching scheduled commands: busy" after a device communication error. Impact: error handling bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: announce if built with debuggingTilman Schmidt
Mention in the driver load announcement whether the driver was built with debugging messages enabled, to facilitate support. Impact: informational message Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: handle isoc frame errors more gracefullyTilman Schmidt
Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: linearize skbTilman Schmidt
The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix reject/hangup handlingTilman Schmidt
Signal D channel disconnect in a few cases where it was missed, including when an incoming call is disconnected before it was accepted. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: make capidrv module parameter "debugmode" writeableTilman Schmidt
Being able to change the debugmode module parameter of capidrv on the fly is quite useful for debugging and doesn't do any harm. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: avoid races in capidrvTilman Schmidt
In several places, capidrv sends a CAPI message to the ISDN device and then updates its internal state accordingly. If the response message from the device arrives before the state is updated, it may be rejected or processed incorrectly. Avoid these races by updating the state before emitting the message. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: accept CAPI Informational Info values as successTilman Schmidt
Info values in the 0x00xx range are defined in the CAPI standard as "Informational, message processed successfully". Therefore a CONNECT_B3_CONF message with an Info value in that range should open an NCCI just as with Info==0. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06Documentation: expand isdn/INTERFACE.CAPI documentTilman Schmidt
- Note that send_message() may be called in interrupt context. - Describe the storage of CAPI messages and payload data in SKBs. - Add more details to the description of the _cmsg structure. - Describe kernelcapi debugging output. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07drm/radeon: Fix setting of bitsRoel Kluin
Duplicate bits set Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06pata_atp867x: add Power Management supportBartlomiej Zolnierkiewicz
Cc: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-06pata_atp867x: PIO support fixesBartlomiej Zolnierkiewicz
* use 8 clk setting for active clocks == 7 (was 12 clk) * use 12 clk setting for active clocks > 12 (was 8 clk) * do 66MHz bus fixup before mapping active clocks * fix setup of PIO command timings Acked-by: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-06pata_atp867x: clarifications in timings calculations and cable detectionJohn(Jung-Ik) Lee
Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-06pata_atp867x: fix it to not claim MWDMA supportBartlomiej Zolnierkiewicz
MWDMA modes are not supported by this driver currently. Acked-by: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-06libata: fix incorrect link online check during probeTejun Heo
While trying to work around spurious detection retries for non-existent devices on slave links, commit 816ab89782ac139a8b65147cca990822bb7e8675 incorrectly added link offline check logic before ata_eh_thaw() was called. This means that if an occupied link goes down briefly at the time that offline check was performed, device class will be cleared to ATA_DEV_NONE and libata wouldn't retry thus failing detection of the device. The offline check should be done after the port is thawed together with online check so that such link glitches can be detected by the interrupt handler and handled properly. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tim Blechmann <tim@klingt.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-06be2net: Bug fix to properly update ethtool tx-checksumming after ethtool -K ↵Ajit Khaparde
<ifname> tx off This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Fix a typo in be_cmds.hAjit Khaparde
MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug Fix while accounting of multicast frames during netdev stats updateAjit Khaparde
While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix lock/mutex warnings.Ron Mercer
Get rid of spinlock and private mutex usage for exclusive access to the HW semaphore register. rtnl_lock already creates exclusive access to this register in all driver API. Add rtnl to firmware worker threads that also use the HW semaphore register. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix queueing of firmware handler in ISR.Ron Mercer
Check that we are not already polling firmware events before we queue the firmware event worker, then disable firmware interrupts. Otherwise we can queue the same event multiple times. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix some bit definitions for reset register.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06NFSv4: Fix the referral mount codeTrond Myklebust
Fix a typo which causes try_location() to use the wrong length argument when calling nfs_parse_server_name(). This again, causes the initialisation of the mount's sockaddr structure to fail. Also ensure that if nfs4_pathname_string() returns an error, then we pass that error back up the stack instead of ENOENT. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06nfs: Avoid overrun when copying client IP address stringBen Hutchings
As seen in <http://bugs.debian.org/549002>, nfs4_init_client() can overrun the source string when copying the client IP address from nfs_parsed_mount_data::client_address to nfs_client::cl_ipaddr. Since these are both treated as null-terminated strings elsewhere, the copy should be done with strlcpy() not memcpy(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06NFS: Fix port initialisation in nfs_remount()Trond Myklebust
The recent changeset 53a0b9c4c99ab0085a06421f71592722e5b3fd5f (NFS: Replace nfs_parse_ip_address() with rpc_pton()) broke nfs_remount, since the call to rpc_pton() will zero out the port number in data->nfs_server.address. This is actually due to a bug in nfs_remount: it should be looking at the port number in nfs_server.port instead... This fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=14276 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06NFS: Fix port and mountport display in /proc/self/mountinfoTrond Myklebust
Currently, the port and mount port will both display as 65535 if you do not specify a port number. That would be wrong... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06NFS: Fix a default mount regression...Trond Myklebust
With the recent spate of changes, the nfs protocol version will now default to 2 instead of 3, while the mount protocol version defaults to 3. The following patch should ensure the defaults are consistent with the previous defaults of vers=3,proto=tcp,mountvers=3,mountproto=tcp. This fixes the bug http://bugzilla.kernel.org/show_bug.cgi?id=14259 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06cfq-iosched: fix the slice residual signJens Axboe
We should subtract the slice residual from the rb tree key, since a negative residual count indicates that the cfqq overran its slice the last time. Hence we want to add the overrun time, to position it a bit further away in the service tree. Reported-by: Corrado Zoccolo <czoccolo@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06cfq-iosched: abstract out the 'may this cfqq dispatch' logicJens Axboe
Makes the whole thing easier to read, cfq_dispatch_requests() was a bit messy before. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSIMark Brown
These should be handled via set_tdm_slot() now and cause build failures as-is. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06block: use proper BLK_RW_ASYNC in blk_queue_start_tag()Jens Axboe
Makes it easier to read than the 0. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06block: Seperate read and write statistics of in_flight requests v2Nikanth Karthikesan
Commit a9327cac440be4d8333bba975cbbf76045096275 added seperate read and write statistics of in_flight requests. And exported the number of read and write requests in progress seperately through sysfs. But Corrado Zoccolo <czoccolo@gmail.com> reported getting strange output from "iostat -kx 2". Global values for service time and utilization were garbage. For interval values, utilization was always 100%, and service time is higher than normal. So this was reverted by commit 0f78ab9899e9d6acb09d5465def618704255963b The problem was in part_round_stats_single(), I missed the following: if (now == part->stamp) return; - if (part->in_flight) { + if (part_in_flight(part)) { __part_stat_add(cpu, part, time_in_queue, part_in_flight(part) * (now - part->stamp)); __part_stat_add(cpu, part, io_ticks, (now - part->stamp)); With this chunk included, the reported regression gets fixed. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> -- Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06PCI PM: Read device power state from register after updating itRafael J. Wysocki
After attempting to change the power state of a PCI device pci_raw_set_power_state() doesn't check if the value it wrote into the device's PCI_PM_CTRL register has been stored in there, but unconditionally modifies the device's current_state field to reflect the change. This may cause problems to happen if the power state of the device hasn't been changed in fact, because it will make the PCI PM core make a wrong assumption. To prevent such situations from happening modify pci_raw_set_power_state() so that it reads the device's PCI_PM_CTRL register after writing into it and uses the value read from the register to update the device's current_state field. Also make it print a message saying that the device refused to change its power state as requested (returning an error code in such cases would cause suspend regressions to appear on some systems, where device drivers' suspend routines return error codes if pci_set_power_state() fails). Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit (git 2.34.1) at 2025-09-12 16:34:22 +0000