| Age | Commit message (Collapse) | Author |
|---|
|
The check for cancelled request depends on the VID of the chip, but
some chips share VID which shouldn't share their cancellation
behavior. This is the case for the Nuvoton NPCT75X, which should use
the default cancellation check, not the Winbond one.
To avoid changing the existing behavior, add a new flag to indicate
that the chip should use the default cancellation check and set it
for the I2C TPM2 TIS driver.
Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The sanity check mask for TPM_INT_ENABLE register was off by 8 bits,
resulting in failure to probe if the TPM_INT_ENABLE register was a
valid value.
Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TEE trusted keys support depends on registered shared memory support
since the key buffers are needed to be registered with OP-TEE. So make
that dependency explicit to not register trusted keys support if
underlying implementation doesn't support registered shared memory.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TPM code registers put_device() as a devm cleanup handler, and casts
the reference to the right function pointer type for this to be
permitted by the compiler.
However, under kCFI, this is rejected at runtime, resulting in a splat
like
CFI failure at devm_action_release+0x24/0x3c (target: put_device+0x0/0x24; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 0000000000000000 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 20 PID: 454 Comm: systemd-udevd Not tainted 6.1.0-rc1+ #51
Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Oct 3 2022
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : devm_action_release+0x24/0x3c
lr : devres_release_all+0xb4/0x114
sp : ffff800009bb3630
x29: ffff800009bb3630 x28: 0000000000000000 x27: 0000000000000011
x26: ffffaa6f9922c0c8 x25: 0000000000000002 x24: 000000000000000f
x23: ffff800009bb3648 x22: ffff7aefc3be2100 x21: ffff7aefc3be2e00
x20: 0000000000000005 x19: ffff7aefc1e1ec10 x18: ffff800009af70a8
x17: 00000000a488ebfc x16: 0000000094ee7df3 x15: 0000000000000000
x14: 4075c5c2ef7affff x13: e46a91c5c5e2ef42 x12: ffff7aefc2c57540
x11: 0000000000000001 x10: 0000000000000001 x9 : 0000000100000000
x8 : ffffaa6fa09b39b4 x7 : 7f7f7f7f7f7f7f7f x6 : 8000000000000000
x5 : 000000008020000e x4 : ffff7aefc2c57500 x3 : ffff800009bb3648
x2 : ffff800009bb3648 x1 : ffff7aefc3be2e80 x0 : ffff7aefc3bb7000
Call trace:
devm_action_release+0x24/0x3c
devres_release_all+0xb4/0x114
really_probe+0xb0/0x49c
__driver_probe_device+0x114/0x180
driver_probe_device+0x48/0x1ec
__driver_attach+0x118/0x284
bus_for_each_dev+0x94/0xe4
driver_attach+0x24/0x34
bus_add_driver+0x10c/0x220
driver_register+0x78/0x118
__platform_driver_register+0x24/0x34
init_module+0x20/0xfe4 [tpm_tis_synquacer]
do_one_initcall+0xd4/0x248
do_init_module+0x44/0x28c
load_module+0x16b4/0x1920
Fix this by going through a helper function of the correct type.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Switch the driver from legacy gpio API (that uses flat GPIO numbering)
to the newer gpiod API (which used descriptors and respects line
polarities specified in ACPI or device tree).
Because gpio handling code for SPI and I2C variants duplicates each
other it is moved into the core code for the driver.
Also, it seems that the driver never assigned tpm_dev->io_lpcpd in the
past, so gpio-based power management was most likely not working ever.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Drop support for platform data from the driver because there are no
users of st33zp24_platform_data structure in the mainline kernel.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
There is no need to include <linux/kernel.h> here.
Prefer the less invasive <linux/types.h> and <linux/compiler_types.h>
which are needed in this .h file itself.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/c1d479b39e30fe70c4579a1af035d4db49421f56.1670069909.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Usually when closing a crypto device (eg: dm-crypt with LUKS) the
volume key is not required, as it requires root privileges anyway, and
root can deny access to a disk in many ways regardless. Requiring the
volume key to lock the device is a peculiarity of the OPAL
specification.
Given we might already have saved the key if the user requested it via
the 'IOC_OPAL_SAVE' ioctl, we can use that key to lock the device if no
key was provided here and the locking range matches, and the user sets
the appropriate flag with 'IOC_OPAL_SAVE'. This allows integrating OPAL
with tools and libraries that are used to the common behaviour and do
not ask for the volume key when closing a device.
Callers can always pass a non-zero key and it will be used regardless,
as before.
Suggested-by: Štěpán Horáček <stepan.horacek@gmail.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20221206092913.4625-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace assocating with associating.
Replace intiailized with initialized.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221206093307.378249-1-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212081545178689771@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212021721543696124@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/202212021705128095546@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.
The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak.
Fixes: 99b38b4acc0d ("platform/x86: add MXM WMI driver.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Advantech MICA-071 is a standard Windows tablet, but it has an extra
"quick launch" button which is not described in the ACPI tables in anyway.
Use the x86-android-tablets infra to create a gpio-button device for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221127221928.123660-1-hdegoede@redhat.com
|
|
+ fuel-gauge data
The Lenovo Yoga Tab 3 (YT3-X90F) is an Intel Cherry Trail based tablet
which ships with Android as Factory OS. Its DSDT contains a bunch of I2C
devices which are not actually there, causing various resource conflicts.
Use acpi_quirk_skip_i2c_client_enumeration() to not enumerate these.
The YT3-X90F has quite a bit of exotic hardware, this adds initial
support by manually instantiating the i2c-clients for the 2 charger +
2 fuel-gauge chips used for the 2 batteries.
Support for other parts of the hw will be added by follow-up patches.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221127182458.104528-1-hdegoede@redhat.com
|
|
The Medion Lifetab S10346 is a x86 ACPI tablet which ships with Android
x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221208110224.107354-1-hdegoede@redhat.com
|
|
The Medion Lifetab S10346 is a x86 tablet which ships with Android x86 as
factory OS. The Android x86 kernel fork ignores I2C devices described in
the DSDT, except for the PMIC and Audio codecs.
As usual the Medion Lifetab S10346's DSDT contains a bunch of extra I2C
devices which are not actually there, causing various resource conflicts.
Add an ACPI_QUIRK_SKIP_I2C_CLIENTS quirk for the Medion Lifetab S10346 to
the acpi_quirk_skip_dmi_ids table to woraround this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Following by the below discussion, there's the potential UAF issue
between regulator and mfd.
https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/
From the analysis of Yingliang
CPU A |CPU B
mt6370_probe() |
devm_mfd_add_devices() |
|mt6370_regulator_probe()
| regulator_register()
| //allocate init_data and add it to devres
| regulator_of_get_init_data()
i2c_unregister_device() |
device_del() |
devres_release_all() |
// init_data is freed |
release_nodes() |
| // using init_data causes UAF
| regulator_register()
It's common to use mfd core to create child device for the regulator.
In order to do the DT lookup for init data, the child that registered
the regulator would pass its parent as the parameter. And this causes
init data resource allocated to its parent, not itself. The issue happen
when parent device is going to release and regulator core is still doing
some operation of init data constraint for the regulator of child device.
To fix it, this patch expand 'regulator_register' API to use the
different devices for init data allocation and DT lookup.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1670311341-32664-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The addition of 3WIRE support would affect MOSI direction even
when still in standard (4 wire) mode. This can lead to MOSI being
at an invalid logic level when a device driver sets an SPI
message with a NULL tx_buf.
spi.h states that if tx_buf is NULL then "zeros will be shifted
out ... " If MOSI is tristated then the data shifted out is subject
to pull resistors, keepers, or in the absence of those, noise.
This issue came to light when using spi-gpio connected to an
ADS7843 touchscreen controller. MOSI pulled high when clocking
MISO data in caused the SPI device to interpret this as a command
which would put the device in an unexpected and non-functional
state.
Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
Fixes: 5132b3d28371 ("spi: gpio: Support 3WIRE high-impedance turn-around")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://lore.kernel.org/r/20221207230853.6174-1-kris@embeddedTS.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several regulator schemas are missing 'unevaluatedProperties' constraint
which means any extra properties are allowed. Upon adding the
constraint, there's numerous warnings from using the deprecated
'regulator-compatible' property. Remove the usage as examples shouldn't
be using long since deprecated properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20221206211554.92005-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the "if MIPS" and "endif" drivers/platform/Kconfig. Instead add
a "depends on MIPS" to "menuconfig MIPS_PLATFORM_DEVICES" in drivers/
platform/mips/Kconfig, like all the other subdirs are doing.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
|
|
Removed the hardcoded "hpq6001" as phys but uses ACPI HID instead.
Signed-off-by: Alex Hung <alexhung@gmail.com>
Link: https://lore.kernel.org/r/20221127004617.722553-1-alex.hung@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The implementation of strscpy() is more robust and safer.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
"make dtbs_check":
arch/mips/boot/dts/mscc/jaguar2_pcb110.dtb: pca9545@70: $nodename:0: 'pca9545@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/mips/boot/dts/mscc/jaguar2_pcb110.dtb: pca9545@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA9545 nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
There is a spelling mistake in a Kconfig description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Passing dentry to some helpers is unnecessary. Simplify these cases.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If memory for uperredirect was allocated with kstrdup() in upperdir != NULL
and d.redirect != NULL path, it may seem that it can be lost when
upperredirect is reassigned later, but it's not possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0a2d0d3f2f291 ("ovl: Check redirect on index as well")
Signed-off-by: Stanislav Goriainov <goriainov@ispras.ru>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Those two cleanup routines are using the helper ovl_dir_read() with the
merge dir filler, which populates an rb tree, that is never used.
The index dir entry names all have a long (42 bytes) constant prefix, so it
is not surprising that perf top has demostrated high CPU usage by rb tree
population during cleanup of a large index dir:
- 9.53% ovl_fill_merge
- 78.41% ovl_cache_entry_find_link.constprop.27
+ 72.11% strncmp
Use the plain list filler that does not populate the unneeded rb tree.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
ovl_indexdir_cleanup() is called on mount of overayfs with nfs_export
feature to cleanup stale index records for lower and upper files that have
been deleted while overlayfs was offline.
This has the side effect (good or bad) of pre populating inode cache with
all the copied up upper inodes, while verifying the index entries.
For copied up directories, the upper file handles are decoded to conncted
upper dentries. This has the even bigger side effect of reading the
content of all the parent upper directories which may take significantly
more time and IO than just reading the upper inodes.
Do not request connceted upper dentries for verifying upper directory index
entries, because we have no use for the connected dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix two typos.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd0895 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There is a wrong case of link() on overlay:
$ mkdir /lower /fuse /merge
$ mount -t fuse /fuse
$ mkdir /fuse/upper /fuse/work
$ mount -t overlay /merge -o lowerdir=/lower,upperdir=/fuse/upper,\
workdir=work
$ touch /merge/file
$ chown bin.bin /merge/file // the file's caller becomes "bin"
$ ln /merge/file /merge/lnkfile
Then we will get an error(EACCES) because fuse daemon checks the link()'s
caller is "bin", it denied this request.
In the changing history of ovl_link(), there are two key commits:
The first is commit bb0d2b8ad296 ("ovl: fix sgid on directory") which
overrides the cred's fsuid/fsgid using the new inode. The new inode's
owner is initialized by inode_init_owner(), and inode->fsuid is
assigned to the current user. So the override fsuid becomes the
current user. We know link() is actually modifying the directory, so
the caller must have the MAY_WRITE permission on the directory. The
current caller may should have this permission. This is acceptable
to use the caller's fsuid.
The second is commit 51f7e52dc943 ("ovl: share inode for hard link")
which removed the inode creation in ovl_link(). This commit move
inode_init_owner() into ovl_create_object(), so the ovl_link() just
give the old inode to ovl_create_or_link(). Then the override fsuid
becomes the old inode's fsuid, neither the caller nor the overlay's
mounter! So this is incorrect.
Fix this bug by using ovl mounter's fsuid/fsgid to do underlying
fs's link().
Link: https://lore.kernel.org/all/20220817102952.xnvesg3a7rbv576x@wittgenstein/T
Link: https://lore.kernel.org/lkml/20220825130552.29587-1-zhangtianci.1997@bytedance.com/t
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Fixes: 51f7e52dc943 ("ovl: share inode for hard link")
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The "buf" flexible array needs to be the memcpy() destination to avoid
false positive run-time warning from the recent FORTIFY_SOURCE
hardening:
memcpy: detected field-spanning write (size 93) of single field "&fh->fb"
at fs/overlayfs/export.c:799 (size 21)
Reported-by: syzbot+9d14351a171d0d1c7955@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000763a6c05e95a5985@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
With the introduction of PRMT in the ACPI subsystem, the EFI rts
workqueue is no longer the only caller of efi_call_virt_pointer() in the
kernel. This means the EFI runtime services lock is no longer sufficient
to manage concurrent calls into firmware, but also that firmware calls
may occur that are not marshalled via the workqueue mechanism, but
originate directly from the caller context.
For added robustness, and to ensure that the runtime services have 8 KiB
of stack space available as per the EFI spec, introduce a spinlock
protected EFI runtime stack of 8 KiB, where the spinlock also ensures
serialization between the EFI rts workqueue (which itself serializes EFI
runtime calls) and other callers of efi_call_virt_pointer().
While at it, use the stack pivot to avoid reloading the shadow call
stack pointer from the ordinary stack, as doing so could produce a
gadget to defeat it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Translate ../loongarch/booting.rst into Chinese.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
1, Describe the information passed from BootLoader to kernel.
2, Describe the meaning and values of the kernel image header field.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In virtual machine (guest mode), the tlbwr instruction can not write the
last entry of MTLB, so we need to make it non-present by invtlb and then
write it by tlbfill. This also simplify the whole logic.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Function smp_send_reschedule() is standard kernel API, which is defined
in header file include/linux/smp.h. However, on LoongArch it is defined
as an inline function, this is confusing and kernel modules can not use
this function.
Now we define smp_send_reschedule() as a general function, and add a
EXPORT_SYMBOL_GPL on this function, so that kernel modules can use it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On t6002 (M1 Ultra), each die contains a self-contained GPU block.
However, only the coprocessor and global management circuitry of the
first die are used. This is what is represented by the "gpu" PS (the
one in die1 is disabled). Nonetheless, this shared component drives the
processing blocks in both dies, and therefore depends on the AFR fabric
being powered up on both dies.
Add an explicit dependency from the GPU block on die0 to AFR on die1,
next to the existing die0 AFR dependency.
Fixes: fa86294eb355 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
It looks like the search-and-replace that happened to add die IDs to
the t600x PMGR tree was a little bit too eager on a comment, and nobody
noticed! Let's fix that.
Fixes: fa86294eb355 ("arm64: dts: apple: Add initial t6000/t6001/t6002 DTs")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers.
It seems to not be always true, at least for UDP stack.
syzbot reported:
BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline]
BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618
CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
ip6_dst_idev include/net/ip6_fib.h:245 [inline]
ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951
__ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:445 [inline]
ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
sock_write_iter+0x295/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2191 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9ed/0xdd0 fs/read_write.c:584
ksys_write+0x1ec/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fde3588c0d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9
RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a
RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000
</TASK>
Allocated by task 7618:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3398 [inline]
slab_alloc mm/slub.c:3406 [inline]
__kmem_cache_alloc_lru mm/slub.c:3413 [inline]
kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422
dst_alloc+0x14a/0x1f0 net/core/dst.c:92
ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline]
rt6_make_pcpu_route net/ipv6/route.c:1417 [inline]
ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254
pol_lookup_func include/net/ip6_fib.h:582 [inline]
fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121
ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625
ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638
ip6_route_output include/net/ip6_route.h:98 [inline]
ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092
ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222
ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260
udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554
inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
__sys_sendto+0x23a/0x340 net/socket.c:2117
__do_sys_sendto net/socket.c:2129 [inline]
__se_sys_sendto net/socket.c:2125 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 7599:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1724 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750
slab_free mm/slub.c:3661 [inline]
kmem_cache_free+0xee/0x5c0 mm/slub.c:3683
dst_destroy+0x2ea/0x400 net/core/dst.c:127
rcu_do_batch kernel/rcu/tree.c:2250 [inline]
rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510
__do_softirq+0x1fb/0xadc kernel/softirq.c:571
Last potentially related work creation:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
dst_release net/core/dst.c:177 [inline]
dst_release+0x7d/0xe0 net/core/dst.c:167
refdst_drop include/net/dst.h:256 [inline]
skb_dst_drop include/net/dst.h:268 [inline]
skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838
skb_release_all net/core/skbuff.c:852 [inline]
__kfree_skb net/core/skbuff.c:868 [inline]
kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891
kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901
kfree_skb_list include/linux/skbuff.h:1227 [inline]
ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949
__ip6_finish_output net/ipv6/ip6_output.c:193 [inline]
ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:445 [inline]
ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161
ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966
udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286
udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313
udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606
inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
sock_write_iter+0x295/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2191 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9ed/0xdd0 fs/read_write.c:584
ksys_write+0x1ec/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x22/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481
call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798
dst_release net/core/dst.c:177 [inline]
dst_release+0x7d/0xe0 net/core/dst.c:167
refdst_drop include/net/dst.h:256 [inline]
skb_dst_drop include/net/dst.h:268 [inline]
__dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211
dev_queue_xmit include/linux/netdevice.h:3008 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:546 [inline]
ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:291 [inline]
ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:445 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
NF_HOOK include/linux/netfilter.h:296 [inline]
mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
The buggy address belongs to the object at ffff88801d403dc0
which belongs to the cache ip6_dst_cache of size 240
The buggy address is located 192 bytes inside of
240-byte region [ffff88801d403dc0, ffff88801d403eb0)
The buggy address belongs to the physical page:
page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403
memcg:ffff888022f49c81
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640
raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441
prep_new_page mm/page_alloc.c:2539 [inline]
get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288
__alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555
alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285
alloc_slab_page mm/slub.c:1794 [inline]
allocate_slab+0x213/0x300 mm/slub.c:1939
new_slab mm/slub.c:1992 [inline]
___slab_alloc+0xa91/0x1400 mm/slub.c:3180
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279
slab_alloc_node mm/slub.c:3364 [inline]
slab_alloc mm/slub.c:3406 [inline]
__kmem_cache_alloc_lru mm/slub.c:3413 [inline]
kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422
dst_alloc+0x14a/0x1f0 net/core/dst.c:92
ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344
icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261
mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x669/0x1090 kernel/workqueue.c:2436
kthread+0x2e8/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1459 [inline]
free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509
free_unref_page_prepare mm/page_alloc.c:3387 [inline]
free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483
__unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3398 [inline]
kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443
__alloc_skb+0x214/0x300 net/core/skbuff.c:497
alloc_skb include/linux/skbuff.h:1267 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline]
netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xd3/0x120 net/socket.c:734
__sys_sendto+0x23a/0x340 net/socket.c:2117
__do_sys_sendto net/socket.c:2129 [inline]
__se_sys_sendto net/socket.c:2125 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 1758fd4688eb ("ipv6: remove unnecessary dst_hold() in ip6_fragment()")
Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is not allowed to call kfree_skb() or consume_skb() from
hardware interrupt context or with interrupts being disabled.
So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq()
and dev_consume_skb_irq() under spin_lock_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At least the GPY215B and GPY215C has a bug where it is still driving the
interrupt line (MDINT) even after the interrupt status register is read
and its bits are cleared. This will cause an interrupt storm.
Although the MDINT is multiplexed with a GPIO pin and theoretically we
could switch the pinmux to GPIO input mode, this isn't possible because
the access to this register will stall exactly as long as the interrupt
line is asserted. We exploit this very fact and just read a random
internal register in our interrupt handler. This way, it will be delayed
until the external interrupt line is released and an interrupt storm is
avoided.
The internal register access via the mailbox was deduced by looking at
the downstream PHY API because the datasheet doesn't mention any of
this.
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-12-07
The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.
The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.
The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.
* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
====================
Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip
Pull Microchip clk driver updates from Claudiu Beznea:
It contains a fix for Microchip Polarfire clocks; the fix consist in checking
the return value of devm_kzalloc() in mpfs_ccc_register_outputs() to
avoid possible null pointer dereference.
* tag 'clk-microchip-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: microchip: check for null return of devm_kzalloc()
ARM: at91: rm9200: fix usb device clock id
|
|
If st_clk_register_quadfs_pll() fails, @lock should be freed before goto
@err_exit, otherwise will cause meory leak issue, fix it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.
Fixes: f28adb41dab4 ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba02 ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
|
|
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
