| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal fixes from Eduardo Valentin:
"A couple of minor fixes for the thermal subsystem.
Specifics in this pull request:
- Fixes in hisilicon thermal driver
- More fixes of unsigned to int type change in thermal_core.c"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: use %d to print S32 parameters
thermal: hisilicon: increase temperature resolution
|
|
On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.
Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* if we have a hashed negative dentry and either CREAT|EXCL on
r/o filesystem, or CREAT|TRUNC on r/o filesystem, or CREAT|EXCL
with failing may_o_create(), we should fail with EROFS or the
error may_o_create() has returned, but not ENOENT. Which is what
the current code ends up returning.
* if we have CREAT|TRUNC hitting a regular file on a read-only
filesystem, we can't fail with EROFS here. At the very least,
not until we'd done follow_managed() - we might have a writable
file (or a device, for that matter) bound on top of that one.
Moreover, the code downstream will see that O_TRUNC and attempt
to grab the write access (*after* following possible mount), so
if we really should fail with EROFS, it will happen. No need
to do that inside atomic_open().
The real logics is much simpler than what the current code is
trying to do - if we decided to go for simple lookup, ended
up with a negative dentry *and* had create_error set, fail with
create_error. No matter whether we'd got that negative dentry
from lookup_real() or had found it in dcache.
Cc: stable@vger.kernel.org # v3.6+
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When configuring a pfn-device instance to allocate the memmap array it
needs to account for the fact that vmemmap_populate_hugepages()
allocates struct page blocks in HPAGE_SIZE chunks. We need to align the
reserved area size to 2MB otherwise arch_add_memory() runs out of memory
while establishing the memmap:
WARNING: CPU: 0 PID: 496 at arch/x86/mm/init_64.c:704 arch_add_memory+0xe7/0xf0
[..]
Call Trace:
[<ffffffff8148bdb3>] dump_stack+0x85/0xc2
[<ffffffff810a749b>] __warn+0xcb/0xf0
[<ffffffff810a75cd>] warn_slowpath_null+0x1d/0x20
[<ffffffff8106a497>] arch_add_memory+0xe7/0xf0
[<ffffffff811d2097>] devm_memremap_pages+0x287/0x450
[<ffffffff811d1ffa>] ? devm_memremap_pages+0x1ea/0x450
[<ffffffffa0000298>] __wrap_devm_memremap_pages+0x58/0x70 [nfit_test_iomap]
[<ffffffffa0047a58>] pmem_attach_disk+0x318/0x420 [nd_pmem]
[<ffffffffa0047bcf>] nd_pmem_probe+0x6f/0x90 [nd_pmem]
[<ffffffffa0009469>] nvdimm_bus_probe+0x69/0x110 [libnvdimm]
[..]
ndbus0: nd_pmem.probe(pfn3.0) = -12
nd_pmem: probe of pfn3.0 failed with error -12
libndctl: ndctl_pfn_enable: pfn3.0: failed to enable
Reported-by: Namratha Kothapalli <namratha.n.kothapalli@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff
which results in an allocation failure when allocating the block layer tags
for the driver's queues. This was introduced with the change for host wide
tags in commit 64d513ac31b - "scsi: use host wide tags by default".
Reduce can_queue to MAX_OUTSTANDING_COMMANDS (512) to solve the allocation
error.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 64d513ac31b - "scsi: use host wide tags by default"
Cc: stable@vger.kernel.org # v4.4
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michael Reed <mdr@sgi.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
|
|
It's possible to use "err" without initializing it. If it happens to be
a 2 which is SCSI_DH_RETRY then that could cause a bug. Bart Van Assche
pointed out that we should probably re-initialize it for every iteration
through the retry loop.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
|
|
Calling gpiod_get() from a module and then unloading the module leads to an
oops due to acpi_can_fallback_to_crs() storing the pointer to the passed
'con_id' string onto acpi_crs_lookup_list. The next guy to come along will then
try to access the string but the memory may now be gone with the module.
Make a copy of the passed string instead, and store the copy on the list.
BUG: unable to handle kernel paging request at ffffffffa03e7855
IP: [<ffffffff81338322>] strcmp+0x12/0x30
PGD 2a07067 PUD 2a08063 PMD 74720067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: i915(+) drm_kms_helper drm intel_gtt snd_hda_codec snd_hda_core i2c_algo_bit syscopya
rea sysfillrect sysimgblt fb_sys_fops agpgart snd_soc_sst_bytcr_rt5640 coretemp hwmon intel_rapl intel_soc_dts_thermal
punit_atom_debug snd_soc_rt5640 snd_soc_rl6231 serio snd_intel_sst_acpi snd_intel_sst_core video snd_soc_sst_mfld_platf
orm snd_soc_sst_match backlight int3402_thermal processor_thermal_device int3403_thermal int3400_thermal acpi_thermal_r
el snd_soc_core intel_soc_dts_iosf int340x_thermal_zone snd_compress i2c_hid hid snd_pcm snd_timer snd soundcore evdev
sch_fq_codel efivarfs ipv6 autofs4 [last unloaded: drm]
CPU: 2 PID: 3064 Comm: modprobe Tainted: G U W 4.6.0-rc3-ffrd-ipvr+ #302
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8
_X64_R_2014_13_1_00 03/24/2014
task: ffff8800701cd200 ti: ffff880070034000 task.ti: ffff880070034000
RIP: 0010:[<ffffffff81338322>] [<ffffffff81338322>] strcmp+0x12/0x30
RSP: 0000:ffff880070037748 EFLAGS: 00010286
RAX: 0000000080000000 RBX: ffff88007a342800 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffffffffa054f856 RDI: ffffffffa03e7856
RBP: ffff880070037748 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa054f855
R13: ffff88007281cae0 R14: 0000000000000010 R15: ffffffffffffffea
FS: 00007faa51447700(0000) GS:ffff880079300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa03e7855 CR3: 0000000041eba000 CR4: 00000000001006e0
Stack:
ffff880070037770 ffffffff8136ad28 ffffffffa054f855 0000000000000000
ffff88007a0a2098 ffff8800700377e8 ffffffff8136852e ffff88007a342800
00000007700377a0 ffff8800700377a0 ffffffff81412442 70672d6c656e6170
Call Trace:
[<ffffffff8136ad28>] acpi_can_fallback_to_crs+0x88/0x100
[<ffffffff8136852e>] gpiod_get_index+0x25e/0x310
[<ffffffff81412442>] ? mipi_dsi_attach+0x22/0x30
[<ffffffff813685f2>] gpiod_get+0x12/0x20
[<ffffffffa04fcf41>] intel_dsi_init+0x421/0x480 [i915]
[<ffffffffa04d3783>] intel_modeset_init+0x853/0x16b0 [i915]
[<ffffffffa0504864>] ? intel_setup_gmbus+0x214/0x260 [i915]
[<ffffffffa0510158>] i915_driver_load+0xdc8/0x19b0 [i915]
[<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70
[<ffffffffa026b13b>] drm_dev_register+0xab/0xc0 [drm]
[<ffffffffa026d7b3>] drm_get_pci_dev+0x93/0x1f0 [drm]
[<ffffffff8160fb53>] ? _raw_spin_unlock_irqrestore+0x43/0x70
[<ffffffffa043f1f4>] i915_pci_probe+0x34/0x50 [i915]
[<ffffffff81379751>] pci_device_probe+0x91/0x100
[<ffffffff8141a75a>] driver_probe_device+0x20a/0x2d0
[<ffffffff8141a8be>] __driver_attach+0x9e/0xb0
[<ffffffff8141a820>] ? driver_probe_device+0x2d0/0x2d0
[<ffffffff81418439>] bus_for_each_dev+0x69/0xa0
[<ffffffff8141a04e>] driver_attach+0x1e/0x20
[<ffffffff81419c20>] bus_add_driver+0x1c0/0x240
[<ffffffff8141b6d0>] driver_register+0x60/0xe0
[<ffffffff81377d20>] __pci_register_driver+0x60/0x70
[<ffffffffa026d9f4>] drm_pci_init+0xe4/0x110 [drm]
[<ffffffff810ce04e>] ? trace_hardirqs_on+0xe/0x10
[<ffffffffa02f1000>] ? 0xffffffffa02f1000
[<ffffffffa02f1094>] i915_init+0x94/0x9b [i915]
[<ffffffff810003bb>] do_one_initcall+0x8b/0x1c0
[<ffffffff810eb616>] ? rcu_read_lock_sched_held+0x86/0x90
[<ffffffff811de6d6>] ? kmem_cache_alloc_trace+0x1f6/0x270
[<ffffffff81183826>] do_init_module+0x60/0x1dc
[<ffffffff81115a8d>] load_module+0x1d0d/0x2390
[<ffffffff811120b0>] ? __symbol_put+0x70/0x70
[<ffffffff811f41b2>] ? kernel_read_file+0x92/0x120
[<ffffffff811162f4>] SYSC_finit_module+0xa4/0xb0
[<ffffffff8111631e>] SyS_finit_module+0xe/0x10
[<ffffffff81001ff3>] do_syscall_64+0x63/0x350
[<ffffffff816103da>] entry_SYSCALL64_slow_path+0x25/0x25
Code: f7 48 8d 76 01 48 8d 52 01 0f b6 4e ff 84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0
74 18 48 8d 7f 01 48 8d 76 01 <0f> b6 47 ff 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31 c0 5d c3 66
RIP [<ffffffff81338322>] strcmp+0x12/0x30
RSP <ffff880070037748>
CR2: ffffffffa03e7855
v2: Make the copied con_id const
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A few more powerpc fixes for 4.6:
- cxl: Keep IRQ mappings on context teardown from Michael Neuling
- cxl: Poll for outstanding IRQs when detaching a context from
Michael Neuling
- Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra"
* tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: wire up preadv2 and pwritev2 syscalls
cxl: Poll for outstanding IRQs when detaching a context
cxl: Keep IRQ mappings on context teardown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"Make sure sb_edac and i7core_edac do not terminate MCE processing on
the decoding callchain prematurely"
* tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"One revert of a recent cpufreq commit that introduced a regression and
a fix for intel_pstate's Turbo Activation Ratio handling code.
Specifics:
- Revert cpufreq commit that attempted to fix a problem in the
ondemand/conservative governor code, but did that incorrectly and
introduced another problem instead (Rafael Wysocki).
- Fix incorrect decoding of MSR contents related to the Turbo
Activation Ratio (TAR) handling in the intel_pstate driver
(Srinivas Pandruvada)"
* tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
|
|
Pull MMC fixes from Ulf Hansson:
"Here are a two MMC host fixes:
- sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
- sunxi: Disable eMMC HS-DDR for Allwinner A80"
* tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80
mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
|
|
Pull drm fixes from Dave Airlie:
"A few fixes all over the place:
radeon is probably the biggest standout, it's a fix for screen
corruption or hung black outputs so I thought it was worth pulling in.
Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one
etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM
fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix order of operation
drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
drm/amdgpu: disable vm interrupts with vm_fault_stop=2
drm/amdgpu: print a message if ATPX dGPU power control is missing
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
drm/radeon: fix vertical bars appear on monitor (v2)
drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
drm/virtio: send vblank event after crtc updates
drm/dp/mst: Restore primary hub guid on resume
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Final set of -rc fixes for 4.6.
I've collected up a number of patches that are all pretty small with
the exception of only a couple. The hfi1 driver has a number of
important patches, and it is what really drives the line count of this
pull request up. These are all small and I've got this kernel built
and running in the test lab (I have most of the hardware, I think nes
is the only thing in this patch set that I can't say I've personally
tested and have up and running).
Summary:
- A number of collected fixes for oopses, memory corruptions,
deadlocks, etc. All of these fixes are small (many only 5-10
lines), obvious, and tested.
- Fix for the security issue related to the use of write for
bi-directional communications"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
RDMA/nes: don't leak skb if carrier down
IB/security: Restrict use of the write() interface
IB/hfi1: Use kernel default llseek for ui device
IB/hfi1: Don't attempt to free resources if initialization failed
IB/hfi1: Fix missing lock/unlock in verbs drain callback
IB/rdmavt: Fix send scheduling
IB/hfi1: Prevent unpinning of wrong pages
IB/hfi1: Fix deadlock caused by locking with wrong scope
IB/hfi1: Prevent NULL pointer deferences in caching code
MAINTAINERS: Update iser/isert maintainer contact info
IB/mlx5: Expose correct max_sge_rd limit
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
iw_cxgb4: handle draining an idle qp
iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping
iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping
IB/core: Don't drain non-existent rq queue-pair
IB/core: Fix oops in ib_cache_gid_set_default_gid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.6-rc6
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
ftrace_dyn_arch_init no longer in kstop_machine, so remove the
corresponding comment.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
If device has R5_LOCKED set, it's legit device has R5_SkipCopy set and page !=
orig_page. After R5_LOCKED is clear, handle_stripe_clean_event will clear the
SkipCopy flag and set page to orig_page. So the warning is unnecessary.
Reported-by: Joey Liao <joeyliao@qnap.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allow generate timestamped suffixed multiple perf.data files upon receiving
SIGUSR2 in 'perf record', to slice a long running monitoring session, allowing
to dump uninteresting sessions (Wang Nan)
- Handle ENOMEM for perf_event_max_stack + PERF_SAMPLE_CALLCHAIN
in perf_evsel__open_strerror(), showing a more informative
message when the request call stack depth can't be allocated by
the kernel (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Use strbuf for making strings in 'perf probe' (Masami Hiramatsu)
- Do not use sizeof on pointer type, not a problem since its a pointer to
pointer, fix none the less. Found by Coccinelle (Vaishali Thakkar)
Cleanups:
- Fix for Coverity found issues in the bpf feature build test (Florian Fainelli)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.6
A single regulator fix
* tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
|
|
The davinci platform contains code that calls into the nvmem
subsystem, but that might be a loadable module, causing a
link error:
arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr':
:(.text+0x1088): undefined reference to `nvmem_device_read'
arch/arm/mach-davinci/built-in.o: In function `read_factory_config':
:(.text+0x214c): undefined reference to `nvmem_device_read'
Also, when NVMEM is completely disabled, the functions fail with
nonobvious error messages.
This ensures we only call the API functions when the code is actually
reachable from the board file, and otherwise prints a unique log
message.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bec3c11bad0e ("misc: at24: replace memory_accessor with nvmem_device_read")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Merge fixes from Andrew Morton:
"20 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
Documentation/sysctl/vm.txt: update numa_zonelist_order description
lib/stackdepot.c: allow the stack trace hash to be zero
rapidio: fix potential NULL pointer dereference
mm/memory-failure: fix race with compound page split/merge
ocfs2/dlm: return zero if deref_done message is successfully handled
Ananth has moved
kcov: don't profile branches in kcov
kcov: don't trace the code coverage code
mm: wake kcompactd before kswapd's short sleep
.mailmap: add Frank Rowand
mm/hwpoison: fix wrong num_poisoned_pages accounting
mm: call swap_slot_free_notify() with page lock held
mm: vmscan: reclaim highmem zone if buffer_heads is over limit
numa: fix /proc/<pid>/numa_maps for THP
mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
mailmap: fix Krzysztof Kozlowski's misspelled name
thp: keep huge zero page pinned until tlb flush
mm: exclude HugeTLB pages from THP page_mapped() logic
kexec: export OFFSET(page.compound_head) to find out compound tail page
kexec: update VMCOREINFO for compound_order/dtor
|
|
After the commit e09acddf873b ("ip_tunnel: replace dst_cache with generic
implementation"), a preemption debug warning is triggered on ip4
tunnels updating; the dst cache helper needs to be invoked in unpreemptible
context.
We don't need to load the cache on tunnel update, so this commit fixes
the warning replacing the load with a dst cache reset, which is
preempt safe.
Fixes: e09acddf873b ("ip_tunnel: replace dst_cache with generic implementation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the bad old days the functions from x86_mce_decoder_chain could be
called in machine check context. So we used to carefully copy them and
defer processing until later. But in
f29a7aff4bd60 ("x86/mce: Avoid potential deadlock due to printk() in MCE context")
we switched the logging code to save the record in a genpool, and call
the functions that registered to be notified later from a work queue.
So drop all the double buffering and do all the work we want to do as
soon as i7core_mce_check_error() is called.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/29ab2c370915c6e132fc5d88e7b72cb834bedbfe.1461855008.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Both of these drivers can return NOTIFY_BAD, but this terminates
processing other callbacks that were registered later on the chain.
Since the driver did nothing to log the error it seems wrong to prevent
other interested parties from seeing it. E.g. neither of them had even
bothered to check the type of the error to see if it was a memory error
before the return NOTIFY_BAD.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Workqueue maybe still in running while we destroy the IDLETIMER target,
thus cause a use after free error, add cancel_work_sync() to avoid such
situation.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* pm-cpufreq-fixes:
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
|
|
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held
an implicit reference to it. But this reference was never stored in form of
a pointer in the batadv_neigh_node itself. Instead
batadv_neigh_node_release depends on a consistent state of
hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the
batadv_hardif_neigh_node object which it has a reference for. But
batadv_hardif_neigh_get cannot guarantee that because it is working only
with rcu_read_lock on this list. It can therefore happen that a neigh_addr
is in this list twice or that batadv_hardif_neigh_get cannot find the
batadv_hardif_neigh_node for an neigh_addr due to some other list
operations taking place at the same time.
Instead add a batadv_hardif_neigh_node pointer directly in
batadv_neigh_node which will be used for the reference counter decremented
on release of batadv_neigh_node.
Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
|
|
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an
implicit reference to it. But this reference was never stored in form of a
pointer in the tt_local_entry itself. Instead batadv_tt_local_remove,
batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend
on a consistent state of bat_priv->softif_vlan_list and that
batadv_softif_vlan_get always returns the batadv_softif_vlan object which
it has a reference for. But batadv_softif_vlan_get cannot guarantee that
because it is working only with rcu_read_lock on this list. It can
therefore happen that an vid is in this list twice or that
batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to
some other list operations taking place at the same time.
Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry
which will be used for the reference counter decremented on release of
batadv_tt_local_entry.
Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
|
|
At the moment there is no explicit reactivation of an hard-interface
upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is
reactivated as soon as the next OGM is scheduled for sending, but this
mechanism does not work with B.A.T.M.A.N. V. The latter does not rely
on the same scheduling mechanism as its predecessor and for this reason
the hard-interface remains deactivated forever after being brought down
once.
This patch fixes the reactivation mechanism by adding a new routing API
which explicitly allows each algorithm to perform any needed operation
upon interface re-activation.
Such API is optional and is implemented by B.A.T.M.A.N. V only and it
just takes care of setting the iface status to ACTIVE
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Now that DAT is VLAN aware, it must use the VID when
computing the DHT address of the candidate nodes where
an entry is going to be stored/retrieved.
Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Phoenix Audio MT202pcs (1de7:0114) and MT202exe (1de7:0013) need the
same workaround as TMX320 for avoiding the firmware bug. It fixes the
frequent error about the sample rate inquiries and the slow device
probe as consequence.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117321
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The maximum supported voltage for ldo_io# is 3.3V, but on cold
boot the selector comes up at 0x1f, which maps to 3.8V.
This causes _regulator_get_voltage() to fail with -EINVAL which
causes regulator registration to fail when constrains are used:
[ 1.467788] vcc-touchscreen: failed to get the current voltage(-22)
[ 1.474209] axp20x-regulator axp20x-regulator: Failed to register ldo_io1
[ 1.483363] axp20x-regulator: probe of axp20x-regulator failed with error -22
This commits makes the axp20x regulator driver accept the 0x1f register
value, fixing this.
The datasheet does not guarantee reliable operation above 3.3V, so on
boards where this regulator is used the regulator-max-microvolt setting
must be 3.3V or less.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that set_thread_area() is supposed to give deterministic behavior
when it modifies in-use segments, test it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f2bc11af1ee1a0f815ed910840cbdba06b640a20.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current behavior of set_thread_area() when it modifies a segment that is
currently loaded is a bit confused.
If CS [1] or SS is modified, the change will take effect on return
to userspace because CS and SS are fundamentally always reloaded on
return to userspace.
Similarly, on 32-bit kernels, if DS, ES, FS, or (depending on
configuration) GS refers to a modified segment, the change will take
effect immediately on return to user mode because the entry code
reloads these registers.
If set_thread_area() modifies DS, ES [2], FS, or GS on 64-bit kernels or
GS on 32-bit lazy-GS [3] kernels, however, the segment registers
will be left alone until something (most likely a context switch)
causes them to be reloaded. This means that behavior visible to
user space is inconsistent.
If set_thread_area() is implicitly called via CLONE_SETTLS, then all
segment registers will be reloaded before the thread starts because
CLONE_SETTLS happens before the initial context switch into the
newly created thread.
Empirically, glibc requires the immediate reload on CLONE_SETTLS --
32-bit glibc on my system does *not* manually reload GS when
creating a new thread.
Before enabling FSGSBASE, we need to figure out what the behavior
will be, as FSGSBASE requires that we reconsider our behavior when,
e.g., GS and GSBASE are out of sync in user mode. Given that we
must preserve the existing behavior of CLONE_SETTLS, it makes sense
to me that we simply extend similar behavior to all invocations
of set_thread_area().
This patch explicitly updates any segment register referring to a
segment that is targetted by set_thread_area(). If set_thread_area()
deletes the segment, then the segment register will be nulled out.
[1] This can't actually happen since 0e58af4e1d21 ("x86/tls:
Disallow unusual TLS segments") but, if it did, this is how it
would behave.
[2] I strongly doubt that any existing non-malicious program loads a
TLS segment into DS or ES on a 64-bit kernel because the context
switch code was badly broken until recently, but that's not an
excuse to leave the current code alone.
[3] One way or another, that config option should to go away. Yuck!
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/27d119b0d396e9b82009e40dff8333a249038225.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Unlike ds and es, these are base addresses, not selectors. Rename
them so their meaning is more obvious.
On x86_32, the field is still called fs. Fixing that could make sense
as a future cleanup.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/69a18a51c4cba0ce29a241e570fc618ad721d908.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As far as I know, the optimization doesn't work on any modern distro
because modern distros use high addresses for ASLR. Remove it.
The ptrace code was either wrong or very strange, but the behavior
with this patch should be essentially identical to the behavior
without this patch unless user code goes out of its way to mislead
ptrace.
On newer CPUs, once the FSGSBASE instructions are enabled, we won't
want to use the optimized variant anyway.
This isn't actually much of a performance regression, it has no effect
on normal dynamically linked programs, and it's a considerably
simplification. It also removes some nasty special cases from code
that is already way too full of special cases for comfort.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/dd1599b08866961dba9d2458faa6bbd7fba471d7.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On AMD CPUs, a failed load_gs_base currently may not clear the FS
base. Fix it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1a6c4d3a8a4e7be79ba448b42685e0321d50c14c.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On AMD CPUs, a failed loadsegment currently may not clear the FS
base. Fix it.
While we're at it, prevent loadsegment(gs, xyz) from even compiling
on 64-bit kernels. It shouldn't be used.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a084c1b93b7b1408b58d3fd0b5d6e47da8e7d7cf.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
asm/alternative.h isn't directly useful from assembly, but it
shouldn't break the build.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e5b693fcef99fe6e80341c9e97a002fb23871e91.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
alternative.h pulls in ptrace.h, which means that alternatives can't
be used in anything referenced from ptrace.h, which is a mess.
Break the dependency by pulling text patching helpers into their own
header.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/99b93b13f2c9eb671f5c98bba4c2cbdc061293a2.1461698311.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Else we get 'BUG: spinlock bad magic on CPU#' on resize when
spin lock debugging is enabled.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The default configuration of a pin is often with a value in the
pull-up/down field at chip reset. So, even if the internal logic of the
controller prevents writing a configuration with pull-up and pull-down at
the same time, we must ensure explicitly this condition before writing the
register.
This was leading to a pull-down condition not taken into account for
instance.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Cc: stable@vger.kernel.org #v4.4 and later
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
driver
So the following commit:
884f4f66ffd6 ("efi: Remove global 'memmap' EFI memory map")
... triggered the following build warning on x86 64-bit allyesconfig:
drivers/xen/efi.c:290:47: warning: missing braces around initializer [-Wmissing-braces]
It's this initialization in drivers/xen/efi.c:
static const struct efi efi_xen __initconst = {
...
.memmap = NULL, /* Not used under Xen. */
...
which was forgotten about, as .memmap now is an embedded struct:
struct efi_memory_map memmap;
We can remove this initialization - it's an EFI core internal data structure plus
it's not used in the Xen driver anyway.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: ard.biesheuvel@linaro.org
Cc: bp@alien8.de
Cc: linux-tip-commits@vger.kernel.org
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/20160429083128.GA4925@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Relocation handling performs bounds checking on the resulting calculated
addresses. The existing code uses output_len (VO size plus relocs size) as
the max address. This is not right since the max_addr check should stop at
the end of VO and exclude bss, brk, etc, which follows. The valid range
should be VO [_text, __bss_start] in the loaded physical address space.
This patch adds an export for __bss_start in voffset.h and uses it to
set the correct limit for max_addr.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[ Rewrote the changelog. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1461888548-32439-7-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
'kernel_total_size'
Since 'run_size' is now calculated in misc.c, the old script and associated
argument passing is no longer needed. This patch removes them, and renames
'run_size' to the more descriptive 'kernel_total_size'.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
[ Rewrote the changelog, renamed 'run_size' to 'kernel_total_size' ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1461888548-32439-6-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, the "run_size" variable holds the total kernel size
(size of code plus brk and bss) and is calculated via the shell script
arch/x86/tools/calc_run_size.sh. It gets the file offset and mem size
of the .bss and .brk sections from the vmlinux, and adds them as follows:
run_size = $(( $offsetA + $sizeA + $sizeB ))
However, this is not correct (it is too large). To illustrate, here's
a walk-through of the script's calculation, compared to the correct way
to find it.
First, offsetA is found as the starting address of the first .bss or
.brk section seen in the ELF file. The sizeA and sizeB values are the
respective section sizes.
[bhe@x1 linux]$ objdump -h vmlinux
vmlinux: file format elf64-x86-64
Sections:
Idx Name Size VMA LMA File off Algn
27 .bss 00170000 ffffffff81ec8000 0000000001ec8000 012c8000 2**12
ALLOC
28 .brk 00027000 ffffffff82038000 0000000002038000 012c8000 2**0
ALLOC
Here, offsetA is 0x012c8000, with sizeA at 0x00170000 and sizeB at
0x00027000. The resulting run_size is 0x145f000:
0x012c8000 + 0x00170000 + 0x00027000 = 0x145f000
However, if we instead examine the ELF LOAD program headers, we see a
different picture.
[bhe@x1 linux]$ readelf -l vmlinux
Elf file type is EXEC (Executable file)
Entry point 0x1000000
There are 5 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000200000 0xffffffff81000000 0x0000000001000000
0x0000000000b5e000 0x0000000000b5e000 R E 200000
LOAD 0x0000000000e00000 0xffffffff81c00000 0x0000000001c00000
0x0000000000145000 0x0000000000145000 RW 200000
LOAD 0x0000000001000000 0x0000000000000000 0x0000000001d45000
0x0000000000018158 0x0000000000018158 RW 200000
LOAD 0x000000000115e000 0xffffffff81d5e000 0x0000000001d5e000
0x000000000016a000 0x0000000000301000 RWE 200000
NOTE 0x000000000099bcac 0xffffffff8179bcac 0x000000000179bcac
0x00000000000001bc 0x00000000000001bc 4
Section to Segment mapping:
Segment Sections...
00 .text .notes __ex_table .rodata __bug_table .pci_fixup .tracedata
__ksymtab __ksymtab_gpl __ksymtab_strings __init_rodata __param
__modver
01 .data .vvar
02 .data..percpu
03 .init.text .init.data .x86_cpu_dev.init .parainstructions
.altinstructions .altinstr_replacement .iommu_table .apicdrivers
.exit.text .smp_locks .bss .brk
04 .notes
As mentioned, run_size needs to be the size of the running kernel
including .bss and .brk. We can see from the Section/Segment mapping
above that .bss and .brk are included in segment 03 (which corresponds
to the final LOAD program header). To find the run_size, we calculate
the end of the LOAD segment from its PhysAddr start (0x0000000001d5e000)
and its MemSiz (0x0000000000301000), minus the physical load address of
the kernel (the first LOAD segment's PhysAddr: 0x0000000001000000). The
resulting run_size is 0x105f000:
0x0000000001d5e000 + 0x0000000000301000 - 0x0000000001000000 = 0x105f000
So, from this we can see that the existing run_size calculation is
0x400000 too high. And, as it turns out, the correct run_size is
actually equal to VO_end - VO_text, which is certainly easier to calculate.
_end: 0xffffffff8205f000
_text:0xffffffff81000000
0xffffffff8205f000 - 0xffffffff81000000 = 0x105f000
As a result, run_size is a simple constant, so we don't need to pass it
around; we already have voffset.h for such things. We can share voffset.h
between misc.c and header.S instead of getting run_size in other ways.
This patch moves voffset.h creation code to boot/compressed/Makefile,
and switches misc.c to use the VO_end - VO_text calculation for run_size.
Dependence before:
boot/header.S ==> boot/voffset.h ==> vmlinux
boot/header.S ==> compressed/vmlinux ==> compressed/misc.c
Dependence after:
boot/header.S ==> compressed/vmlinux ==> compressed/misc.c ==> boot/voffset.h ==> vmlinux
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
[ Rewrote the changelog. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: lasse.collin@tukaani.org
Fixes: e6023367d779 ("x86, kaslr: Prevent .bss from overlaping initrd")
Link: http://lkml.kernel.org/r/1461888548-32439-5-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently z_extract_offset is calculated in boot/compressed/mkpiggy.c.
This doesn't work well because mkpiggy.c doesn't know the details of the
decompressor in use. As a result, it can only make an estimation, which
has risks:
- output + output_len (VO) could be much bigger than input + input_len
(ZO). In this case, the decompressed kernel plus relocs could overwrite
the decompression code while it is running.
- The head code of ZO could be bigger than z_extract_offset. In this case
an overwrite could happen when the head code is running to move ZO to
the end of buffer. Though currently the size of the head code is very
small it's still a potential risk. Since there is no rule to limit the
size of the head code of ZO, it runs the risk of suddenly becoming a
(hard to find) bug.
Instead, this moves the z_extract_offset calculation into header.S, and
makes adjustments to be sure that the above two cases can never happen,
and further corrects the comments describing the calculations.
Since we have (in the previous patch) made ZO always be located against
the end of decompression buffer, z_extract_offset is only used here to
calculate an appropriate buffer size (INIT_SIZE), and is not longer used
elsewhere. As such, it can be removed from voffset.h.
Additionally clean up #if/#else #define to improve readability.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
[ Rewrote the changelog and comments. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1461888548-32439-4-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This change makes later calculations about where the kernel is located
easier to reason about. To better understand this change, we must first
clarify what 'VO' and 'ZO' are. These values were introduced in commits
by hpa:
77d1a4999502 ("x86, boot: make symbols from the main vmlinux available")
37ba7ab5e33c ("x86, boot: make kernel_alignment adjustable; new bzImage fields")
Specifically:
All names prefixed with 'VO_':
- relate to the uncompressed kernel image
- the size of the VO image is: VO__end-VO__text ("VO_INIT_SIZE" define)
All names prefixed with 'ZO_':
- relate to the bootable compressed kernel image (boot/compressed/vmlinux),
which is composed of the following memory areas:
- head text
- compressed kernel (VO image and relocs table)
- decompressor code
- the size of the ZO image is: ZO__end - ZO_startup_32 ("ZO_INIT_SIZE" define, though see below)
The 'INIT_SIZE' value is used to find the larger of the two image sizes:
#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
#define VO_INIT_SIZE (VO__end - VO__text)
#if ZO_INIT_SIZE > VO_INIT_SIZE
# define INIT_SIZE ZO_INIT_SIZE
#else
# define INIT_SIZE VO_INIT_SIZE
#endif
The current code uses extract_offset to decide where to position the
copied ZO (i.e. ZO starts at extract_offset). (This is why ZO_INIT_SIZE
currently includes the extract_offset.)
Why does z_extract_offset exist? It's needed because we are trying to minimize
the amount of RAM used for the whole act of creating an uncompressed, executable,
properly relocation-linked kernel image in system memory. We do this so that
kernels can be booted on even very small systems.
To achieve the goal of minimal memory consumption we have implemented an in-place
decompression strategy: instead of cleanly separating the VO and ZO images and
also allocating some memory for the decompression code's runtime needs, we instead
create this elaborate layout of memory buffers where the output (decompressed)
stream, as it progresses, overlaps with and destroys the input (compressed)
stream. This can only be done safely if the ZO image is placed to the end of the
VO range, plus a certain amount of safety distance to make sure that when the last
bytes of the VO range are decompressed, the compressed stream pointer is safely
beyond the end of the VO range.
z_extract_offset is calculated in arch/x86/boot/compressed/mkpiggy.c during
the build process, at a point when we know the exact compressed and
uncompressed size of the kernel images and can calculate this safe minimum
offset value. (Note that the mkpiggy.c calculation is not perfect, because
we don't know the decompressor used at that stage, so the z_extract_offset
calculation is necessarily imprecise and is mostly based on gzip internals -
we'll improve that in the next patch.)
When INIT_SIZE is bigger than VO_INIT_SIZE (uncommon but possible),
the copied ZO occupies the memory from extract_offset to the end of
decompression buffer. It overlaps with the soon-to-be-uncompressed kernel
like this:
|-----compressed kernel image------|
V V
0 extract_offset +INIT_SIZE
|-----------|---------------|-------------------------|--------|
| | | |
VO__text startup_32 of ZO VO__end ZO__end
^ ^
|-------uncompressed kernel image---------|
When INIT_SIZE is equal to VO_INIT_SIZE (likely) there's still space
left from end of ZO to the end of decompressing buffer, like below.
|-compressed kernel image-|
V V
0 extract_offset +INIT_SIZE
|-----------|---------------|-------------------------|--------|
| | | |
VO__text startup_32 of ZO ZO__end VO__end
^ ^
|------------uncompressed kernel image-------------|
To simplify calculations and avoid special cases, it is cleaner to
always place the compressed kernel image in memory so that ZO__end
is at the end of the decompression buffer, instead of placing t at
the start of extract_offset as is currently done.
This patch adds BP_init_size (which is the INIT_SIZE as passed in from
the boot_params) into asm-offsets.c to make it visible to the assembly
code.
Then when moving the ZO, it calculates the starting position of
the copied ZO (via BP_init_size and the ZO run size) so that the VO__end
will be at the end of the decompression buffer. To make the position
calculation safe, the end of ZO is page aligned (and a comment is added
to the existing VO alignment for good measure).
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[ Rewrote changelog and comments. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1461888548-32439-3-git-send-email-keescook@chromium.org
[ Rewrote the changelog some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When processing the relocation table, the offset used to calculate the
relocation is an 'int'. This is sufficient for calculating the physical
address of the relocs entry on 32-bit systems and on 64-bit systems when
the relocation is under 2G.
To handle relocations above 2G (seen in situations like kexec, netboot, etc),
this offset needs to be calculated using a 'long' to avoid wrapping and
miscalculating the relocation.
Signed-off-by: Baoquan He <bhe@redhat.com>
[ Rewrote the changelog. ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: lasse.collin@tukaani.org
Link: http://lkml.kernel.org/r/1461888548-32439-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
into drm-fixes
A few fixes for 4.6.
- revert amdgpu PX commit that was previously reverted on the radeon side
- cleaned up version of the NI+ MC update display fix for radeon
- TTM kref fix
* 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: disable vm interrupts with vm_fault_stop=2
drm/amdgpu: print a message if ATPX dGPU power control is missing
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
drm/radeon: fix vertical bars appear on monitor (v2)
drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
|
