summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-24macsec: add consistency check to netlink dumpsSabrina Dubroca
Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: fix rx_sa refcounting with decrypt callbackSabrina Dubroca
The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: don't put a NULL rxsaSabrina Dubroca
The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: take rtnl lock before for_each_netdevSabrina Dubroca
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24macsec: add missing NULL check after kmallocSabrina Dubroca
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge branch 'bridge-mdb-fixes'David S. Miller
Jiri Pirko says: ==================== bridge: mdb: Couple of fixes Elad says: This patchset fixes two problems reported by Nikolay Aleksandrov. The first problem is that the MDB offload flag might be accesed without helding the multicast_lock. The second problem is that the switchdev mdb offload is deferred and the offload bit was marked regardless if the operation succeeded or not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24bridge: mdb: Marking port-group as offloadedElad Raz
There is a race-condition when updating the mdb offload flag without using the mulicast_lock. This reverts commit 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module"). This patch marks offloaded MDB entry as "offload" by changing the port- group flags and marks it as MDB_PG_FLAGS_OFFLOAD. When switchdev PORT_MDB succeeded and adds a multicast group, a completion callback is been invoked "br_mdb_complete". The completion function locks the multicast_lock and finds the right net_bridge_port_group and marks it as offloaded. Fixes: 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module") Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24bridge: mdb: Common function for mdb entry translationElad Raz
There is duplicate code that translates br_mdb_entry to br_ip let's wrap it in a common function. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24switchdev: Adding complete operation to deferred switchdev opsElad Raz
When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation is executed in different context and the application doesn't have any way to get the operation real status. Adding a completion callback fixes that. This patch adds fields to switchdev_attr and switchdev_obj "complete_priv" field which is used by the "complete" callback. Application can set a complete function which will be called once the operation executed. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24MAINTAINERS: net: add entry for TI Ethernet Switch driversGrygorii Strashko
Add record for TI Ethernet Switch Driver CPSW/CPDMA/MDIO HW (am33/am43/am57/dr7/davinci) to ensure that related patches will go through dedicated linux-omap list. Also add Mugunthan as maintainer and myself as the reviewer. Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24USB: serial: cp210x: add Straizona Focusers device idsJasem Mutlaq
Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by: Jasem Mutlaq <mutlaqja@ikarustech.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-24USB: serial: cp210x: add ID for Link ECUMike Manning
The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by: Mike Manning <michael@bsch.com.au> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-24batman-adv: Fix broadcast/ogm queue limit on a removed interfaceLinus Lüssing
When removing a single interface while a broadcast or ogm packet is still pending then we will free the forward packet without releasing the queue slots again. This patch is supposed to fix this issue. Fixes: 6d5808d4ae1b ("batman-adv: Add missing hardif_free_ref in forw_packet_free") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Reduce refcnt of removed router when updating routeSven Eckelmann
_batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f978b ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Deactivate TO_BE_ACTIVATED hardif on shutdownSven Eckelmann
The shutdown of an batman-adv interface can happen with one of its slave interfaces still being in the BATADV_IF_TO_BE_ACTIVATED state. A possible reason for it is that the routing algorithm BATMAN_V was selected and batadv_schedule_bat_ogm was not yet called for this interface. This slave interface still has to be set to BATADV_IF_INACTIVE or the batman-adv interface will never reduce its usage counter and thus never gets shutdown. This problem can be simulated via: $ modprobe dummy $ modprobe batman-adv routing_algo=BATMAN_V $ ip link add bat0 type batadv $ ip link set dummy0 master bat0 $ ip link set dummy0 up $ ip link del bat0 unregister_netdevice: waiting for bat0 to become free. Usage count = 3 Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: init neigh node last seen fieldMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Check skb size before using encapsulated ETH+VLAN headerSven Eckelmann
The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-23Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "Specifics in this pull request: - Fixes in mediatek and OF thermal drivers - Fixes in power_allocator governor - More fixes of unsigned to int type change in thermal_core.c. These change have been CI tested using KernelCI bot. \o/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: fix Mediatek thermal controller build thermal: consistently use int for trip temp thermal: fix mtk_thermal build dependency thermal: minor mtk_thermal.c cleanups thermal: power_allocator: req_range multiplication should be a 64 bit type thermal: of: add __init attribute
2016-04-23Merge tag 'asm-generic-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic update from Arnd Bergmann: "Here is one patch to wire up the preadv/pwritev system calls in the generic system call table, which is required for all architectures that were merged in the last few years, including arm64. Usually these get merged along with the syscall implementation or one of the architecture trees, but this time that did not happen. Andre and Christoph both sent a version of this patch, I picked the one I got first" * tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: generic syscalls: wire up preadv2 and pwritev2 syscalls
2016-04-23generic syscalls: wire up preadv2 and pwritev2 syscallsAndre Przywara
These new syscalls are implemented as generic code, so enable them for architectures like arm64 which use the generic syscall table. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-23Merge tag 'qcom-fixes-for-4.6-rc2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Merge "Qualcomm Fixes for v4.6-rc2" from Andy Gross: * Revert BAM usage on MSM8974 boards * tag 'qcom-fixes-for-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node"
2016-04-23arm64: dts: uniphier: fix I2C nodes of PH1-LD20Masahiro Yamada
The I2C hardware blocks on this SoC are connected as follows: I2C0: external connection I2C1: external connection I2C2: internal connection I2C3: external connection I2C4: external connection I2C5: internal connection I2C6: no connection (not accessible) Delete pinctrl from Ch2, add pinctrl to Ch4, and remove the Ch6 node. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-04-23Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two EDAC driver fixes, a Xen crash fix, a HyperV log spam fix and a documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86 EDAC, sb_edac.c: Take account of channel hashing when needed x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address x86/mm/xen: Suppress hugetlbfs in PV guests x86/doc: Correct limits in Documentation/x86/x86_64/mm.txt x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
2016-04-23Merge branches 'perf-urgent-for-linus', 'smp-urgent-for-linus' and ↵Linus Torvalds
'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, cpu hotplug and timer fixes from Ingo Molnar: "perf: - A single tooling fix for a user-triggerable segfault. CPU hotplug: - Fix a CPU hotplug corner case regression, introduced by the recent hotplug rework timers: - Fix a boot hang in the ARM based Tango SoC clocksource driver" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf intel-pt: Fix segfault tracing transactions * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix rollback during error-out in __cpu_disable() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tango-xtal: Fix boot hang due to incorrect test
2016-04-23Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes: pvqspinlocks: - an instrumentation fix futexes: - preempt-count vs pagefault_disable decouple corner case fix - futex requeue plist race window fix - futex UNLOCK_PI transaction fix for a corner case" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic() futex: Acknowledge a new waiter in counter before plist futex: Handle unlock_pi race gracefully locking/pvqspinlock: Fix division by zero in qstat_read()
2016-04-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "A core irq affinity masks related fix and a MIPS irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Don't overrun pcpu_masks array genirq: Dont allow affinity mask to be updated on IPIs
2016-04-23Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes: two improvements to how warnings are printed plus a false positive warning fix, and build environment fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix Makefile to properly see if libelf is supported objtool: Detect falling through to the next function objtool: Add workaround for GCC switch jump table bug
2016-04-23Merge tag 'usb-4.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY driver fixes from Greg KH: "Here are two small sets of patches, both from subsystem trees, USB gadget and PHY drivers. Full details are in the shortlog, and they have all been in linux-next for a while (before I merged them to the USB tree)" * tag 'usb-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Fix use-after-free usb: dwc3: gadget: Fix suspend/resume during device mode usb: dwc3: fix memory leak of dwc->regset usb: dwc3: core: fix PHY handling during suspend usb: dwc3: omap: fix up error path on probe() usb: gadget: composite: Clear reserved fields of SSP Dev Cap phy: rockchip-emmc: adapt binding to specifiy register offset and length phy: rockchip-emmc: should be a child device of the GRF phy: rockchip-dp: should be a child device of the GRF
2016-04-23Merge tag 'tty-4.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial fixes from Greg KH: "Here are 3 serial driver fixes for issues that have been reported. Two are reverts, fixing problems that were in the big TTY/Serial driver merge in 4.6-rc1, and the last one is a simple bugfix for a regression that showed up in 4.6-rc1 as well. All have been in linux-next with no reported issues" * tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Add hardware dependency to RT288X option" tty/serial/8250: fix RS485 half-duplex RX Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
2016-04-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just minor driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl4030-vibra - do not reparent to grandparent Input: twl6040-vibra - do not reparent to grandparent Input: twl6040-vibra - ignore return value of schedule_work Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay Input: arizona-haptic - don't assign input_dev parent Input: clarify we want BTN_TOOL_<name> on proximity Input: xpad - add Mad Catz FightStick TE 2 VID/PID Input: gtco - fix crash on detecting device without endpoints
2016-04-23ARM: socfpga: Initialize Arria10 OCRAM ECC on startupThor Thayer
Initialize ECC for Arria10 On-Chip RAM on machine startup. The OCRAM memory must be initialized before data is stored in memory otherwise the ECC will fail on reads. The previous check-in 2364d423a7b3 ("ARM: socfpga: Enable Arria10 OCRAM ECC on startup") added the OCRAM enable and initialization code but was not called on startup. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1460394094-23326-1-git-send-email-tthayer@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23EDAC: Increment correct counter in edac_inc_ue_error()Emmanouil Maroudas
Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by: Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be635597 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-23Merge tag 'perf-core-for-mingo-20160419' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: Build fixes: - Fix 'perf trace' build when DWARF unwind isn't available (Arnaldo Carvalho de Melo) - Remove x86 references from arch-neutral Build, fixing it in !x86 arches, reported as breaking the build for powerpc64le in linux-next (Arnaldo Carvalho de Melo) Infrastructure changes: - Do memset() variable 'st' using the correct size in the jit code (Colin Ian King) - Fix postgresql ubuntu 'perf script' install instructions (Chris Phlipot) - Use callchain_param more thoroughly when checking how callchains were configured, eventually will be the only way to look for callchain parameters (Arnaldo Carvalho de Melo) - Fix some issues in the 'perf test kallsyms' entry (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/deadline: Fix a bug in dl_overflow()Xunlei Pang
I got a minus(very big) dl_b->total_bw during my deadline tests. # grep dl /proc/sched_debug dl_rq[0]: .dl_nr_running : 0 .dl_bw->bw : 996147 .dl_bw->total_bw : -222297900 Something unusual must have happened. After some digging, I finally noticed that when changing a deadline task to normal(cfs), and changing it back to deadline immediately, after it died, we will got the wrong dl_bw->total_bw. The root cause is in dl_overflow(), it has: if (new_bw == p->dl.dl_bw) return 0; 1) When a deadline task is changed to !deadline task, it will start dl timer in switched_from_dl(), and retain previous deadline parameter till the timer expires. 2) If we change it back to deadline with the same bandwidth parameter before the timer expires, as it keeps the old bandwidth although it is not a deadline task. dl_overflow() simply returns success without updating the right data, and got the wrong dl_bw->total_bw. The solution is simple, if @p is not deadline, don't return. Signed-off-by: Xunlei Pang <xlpang@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@arm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1460636368-1993-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Optimize !CONFIG_NO_HZ_COMMON CPU load updatesFrederic Weisbecker
Some code in CPU load update only concern NO_HZ configs but it is built on all configurations. When NO_HZ isn't built, that code is harmless but just happens to take some useless ressources in CPU and memory: 1) one useless field in struct rq 2) jiffies record on every tick that is never used (cpu_load_update_periodic) 3) decay_load_missed is called two times on every tick to eventually return immediately with no action taken. And that function is dead code. For pure optimization purposes, lets conditionally build the NO_HZ related code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1461080211-16271-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Correctly handle nohz ticks CPU load accountingFrederic Weisbecker
Ticks can happen while the CPU is in dynticks-idle or dynticks-singletask mode. In fact "nohz" or "dynticks" only mean that we exit the periodic mode and we try to minimize the ticks as much as possible. The nohz subsystem uses a confusing terminology with the internal state "ts->tick_stopped" which is also available through its public interface with tick_nohz_tick_stopped(). This is a misnomer as the tick is instead reduced with the best effort rather than stopped. In the best case the tick can indeed be actually stopped but there is no guarantee about that. If a timer needs to fire one second later, a tick will fire while the CPU is in nohz mode and this is a very common scenario. Now this confusion happens to be a problem with CPU load updates: cpu_load_update_active() doesn't handle nohz ticks correctly because it assumes that ticks are completely stopped in nohz mode and that cpu_load_update_active() can't be called in dynticks mode. When that happens, the whole previous tickless load is ignored and the function just records the load for the current tick, ignoring potentially long idle periods behind. In order to solve this, we could account the current load for the previous nohz time but there is a risk that we account the load of a task that got freshly enqueued for the whole nohz period. So instead, lets record the dynticks load on nohz frame entry so we know what to record in case of nohz ticks, then use this record to account the tickless load on nohz ticks and nohz frame end. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1460555812-25375-3-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Gather CPU load functions under a more conventional namespaceFrederic Weisbecker
The CPU load update related functions have a weak naming convention currently, starting with update_cpu_load_*() which isn't ideal as "update" is a very generic concept. Since two of these functions are public already (and a third is to come) that's enough to introduce a more conventional naming scheme. So let's do the following rename instead: update_cpu_load_*() -> cpu_load_update_*() Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1460555812-25375-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Call cpufreq hook in additional pathsSteve Muckle
The cpufreq hook should be called any time the root CFS rq utilization changes. This can occur when a task is switched to or from the fair class, or a task moves between groups or CPUs, but these paths currently do not call the cpufreq hook. Fix this by adding the hook to attach_entity_load_avg() and detach_entity_load_avg(). Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Steve Muckle <smuckle@linaro.org> [ Added the .update_freq argument to update_cfs_rq_load_avg() to avoid a double cpufreq call. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <Juri.Lelli@arm.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458858367-2831-1-git-send-email-smuckle@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Do not call cpufreq hook unless util changedSteve Muckle
There's no reason to call the cpufreq hook if the root cfs_rq utilization has not been modified. Signed-off-by: Steve Muckle <smuckle@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <Juri.Lelli@arm.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/1458606068-7476-2-git-send-email-smuckle@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Move cpufreq hook to update_cfs_rq_load_avg()Steve Muckle
The cpufreq hook should be called whenever the root cfs_rq utilization changes so update_cfs_rq_load_avg() is a better place for it. The current location is not invoked in the enqueue_entity() or update_blocked_averages() paths. Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Steve Muckle <smuckle@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <Juri.Lelli@arm.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1458606068-7476-1-git-send-email-smuckle@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23sched/fair: Fix asym packing to select correct CPUSrikar Dronamraju
When asymmetric packing is set in the sched_domain and target CPU is busy, update_sd_pick_busiest() may not select the busiest runqueue. When target CPU is busy, find_busiest_group() will ignore checks for asym packing and may continue to load balance using the currently selected not-the-busiest runqueue as source runqueue. Selecting the busiest runqueue as source when the target CPU is busy, should result in achieving much better load balance. Also when target CPU is not busy and asymmetric packing is set in sd, select higher CPU as source CPU for load balancing. While doing this change, move the check to see if target CPU is busy into check_asym_packing(). The extent of performance benefit from this change decreases with the increasing load. However there is benefit in undercommit as well as overcommit conditions. 1. Record per second ebizzy (32 threads) on a 64 CPU power 7 box. (5 iterations) 4.6.0-rc2 Testcase: Min Max Avg StdDev ebizzy: 5223767.00 10368236.00 7946971.00 1753094.76 4.6.0-rc2+asym-changes Testcase: Min Max Avg StdDev %Change ebizzy: 8617191.00 13872356.00 11383980.00 1783400.89 +24.78% 2. Record per second ebizzy (64 threads) on a 64 CPU power 7 box. (5 iterations) 4.6.0-rc2 Testcase: Min Max Avg StdDev ebizzy: 6497666.00 18399783.00 10818093.20 4051452.08 4.6.0-rc2+asym-changes Testcase: Min Max Avg StdDev %Change ebizzy: 7567365.00 19456937.00 11674063.60 4295407.48 +4.40% 3. Record per second ebizzy (128 threads) on a 64 CPU power 7 box. (5 iterations) 4.6.0-rc2 Testcase: Min Max Avg StdDev ebizzy: 37073983.00 40341911.00 38776241.80 1259766.82 4.6.0-rc2+asym-changes Testcase: Min Max Avg StdDev %Change ebizzy: 38030399.00 41333378.00 39827404.40 1255001.86 +2.54% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1459948660-16073-1-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23Merge tag 'v4.6-rc4' into sched/core, to refresh the treeIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23x86/perf/rapl: Add missing Broadwell modelPeter Zijlstra
With the array aligned as per events/intel/core.c it was fairly obvious we missed one, add it in. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23x86/perf/rapl: Reorder model numbersPeter Zijlstra
Re-order the model array to match the order in events/intel/core.c, to easier spot gaps and such. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23perf/x86/intel/rapl: Support Skylake RAPL domainsSrinivas Pandruvada
Add Skylake client support for RAPL domains. In addition to RAPL domains in Broadwell clients, it has support for platform domain (aka PSys). The PSys domain controls the entire SoC instead of just a CPU package. Unlike package domain, PSys support requires more than just processor level implementation. The other parts in the system need additional HW level signaling, which OEMs need to support. When not supported, the energy counter register in PSys domain returns 0. Also corrected error in comment for GPU counter, which previously was DRAM counter. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com [ Cnverted to model_match stuff. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: jacob.jun.pan@linux.intel.com Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1460930581-29748-2-git-send-email-srinivas.pandruvada@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23perf/core: Add ::write_backward attribute to perf eventWang Nan
This patch introduces 'write_backward' bit to perf_event_attr, which controls the direction of a ring buffer. After set, the corresponding ring buffer is written from end to beginning. This feature is design to support reading from overwritable ring buffer. Ring buffer can be created by mapping a perf event fd. Kernel puts event records into ring buffer, user tooling like perf fetch them from address returned by mmap(). To prevent racing between kernel and tooling, they communicate to each other through 'head' and 'tail' pointers. Kernel maintains 'head' pointer, points it to the next free area (tail of the last record). Tooling maintains 'tail' pointer, points it to the tail of last consumed record (record has already been fetched). Kernel determines the available space in a ring buffer using these two pointers to avoid overwrite unfetched records. By mapping without 'PROT_WRITE', an overwritable ring buffer is created. Different from normal ring buffer, tooling is unable to maintain 'tail' pointer because writing is forbidden. Therefore, for this type of ring buffers, kernel overwrite old records unconditionally, works like flight recorder. This feature would be useful if reading from overwritable ring buffer were as easy as reading from normal ring buffer. However, there's an obscure problem. The following figure demonstrates a full overwritable ring buffer. In this figure, the 'head' pointer points to the end of last record, and a long record 'E' is pending. For a normal ring buffer, a 'tail' pointer would have pointed to position (X), so kernel knows there's no more space in the ring buffer. However, for an overwritable ring buffer, kernel ignore the 'tail' pointer. (X) head . | . V +------+-------+----------+------+---+ |A....A|B.....B|C........C|D....D| | +------+-------+----------+------+---+ Record 'A' is overwritten by event 'E': head | V +--+---+-------+----------+------+---+ |.E|..A|B.....B|C........C|D....D|E..| +--+---+-------+----------+------+---+ Now tooling decides to read from this ring buffer. However, none of these two natural positions, 'head' and the start of this ring buffer, are pointing to the head of a record. Even the full ring buffer can be accessed by tooling, it is unable to find a position to start decoding. The first attempt tries to solve this problem AFAIK can be found from [1]. It makes kernel to maintain 'tail' pointer: updates it when ring buffer is half full. However, this approach introduces overhead to fast path. Test result shows a 1% overhead [2]. In addition, this method utilizes no more tham 50% records. Another attempt can be found from [3], which allows putting the size of an event at the end of each record. This approach allows tooling to find records in a backward manner from 'head' pointer by reading size of a record from its tail. However, because of alignment requirement, it needs 8 bytes to record the size of a record, which is a huge waste. Its performance is also not good, because more data need to be written. This approach also introduces some extra branch instructions to fast path. 'write_backward' is a better solution to this problem. Following figure demonstrates the state of the overwritable ring buffer when 'write_backward' is set before overwriting: head | V +---+------+----------+-------+------+ | |D....D|C........C|B.....B|A....A| +---+------+----------+-------+------+ and after overwriting: head | V +---+------+----------+-------+---+--+ |..E|D....D|C........C|B.....B|A..|E.| +---+------+----------+-------+---+--+ In each situation, 'head' points to the beginning of the newest record. From this record, tooling can iterate over the full ring buffer and fetch records one by one. The only limitation that needs to be considered is back-to-back reading. Due to the non-deterministic of user programs, it is impossible to ensure the ring buffer keeps stable during reading. Consider an extreme situation: tooling is scheduled out after reading record 'D', then a burst of events come, eat up the whole ring buffer (one or multiple rounds). When the tooling process comes back, reading after 'D' is incorrect now. To prevent this problem, we need to find a way to ensure the ring buffer is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is suggested because its overhead is lower than ioctl(PERF_EVENT_IOC_ENABLE). By carefully verifying 'header' pointer, reader can avoid pausing the ring-buffer. For example: /* A union of all possible events */ union perf_event event; p = head = perf_mmap__read_head(); while (true) { /* copy header of next event */ fetch(&event.header, p, sizeof(event.header)); /* read 'head' pointer */ head = perf_mmap__read_head(); /* check overwritten: is the header good? */ if (!verify(sizeof(event.header), p, head)) break; /* copy the whole event */ fetch(&event, p, event.header.size); /* read 'head' pointer again */ head = perf_mmap__read_head(); /* is the whole event good? */ if (!verify(event.header.size, p, head)) break; p += event.header.size; } However, the overhead is high because: a) In-place decoding is not safe. Copying-verifying-decoding is required. b) Fetching 'head' pointer requires additional synchronization. (From Alexei Starovoitov: Even when this trick works, pause is needed for more than stability of reading. When we collect the events into overwrite buffer we're waiting for some other trigger (like all cpu utilization spike or just one cpu running and all others are idle) and when it happens the buffer has valuable info from the past. At this point new events are no longer interesting and buffer should be paused, events read and unpaused until next trigger comes.) This patch utilizes event's default overflow_handler introduced previously. perf_event_output_backward() is created as the default overflow handler for backward ring buffers. To avoid extra overhead to fast path, original perf_event_output() becomes __perf_event_output() and marked '__always_inline'. In theory, there's no extra overhead introduced to fast path. Performance testing: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE1 2253846.700 9997.014 PRE2 2257495.540 8516.293 POST 2250896.100 8933.921 Where 'BASE' is pure performance without capturing. 'PRE1' is test result of pure 'v4.5.0' kernel. 'PRE2' is test result before this patch. 'POST' is test result after this patch. See [4] for the detailed experimental setup. Considering the stdvar, this patch doesn't introduce performance overhead to the fast path. [1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html [3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html [4] http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: <acme@kernel.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com [ Fixed the changelog some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23perf/x86/intel: Add LBR filter support for Silvermont and Airmont CPUsKan Liang
LBR filtering is also supported on the Silvermont and Airmont microarchitectures. The layout of MSR_LBR_SELECT is the same as Nehalem. Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1460706825-46163-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23perf/x86/intel: Add Goldmont CPU supportKan Liang
Add perf core PMU support for Intel Goldmont CPU cores: - The init code is based on Silvermont. - There is a new cache event list, based on the Silvermont cache event list. - Goldmont has 32 LBR entries. It also uses new LBRv6 format, which report the cycle information using upper 16-bit of the LBR_TO. - It's recommended to use CPU_CLK_UNHALTED.CORE_P + NPEBS for precise cycles. For details, please refer to the latest SDM058: http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3b-part-2-manual.pdf Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1460706167-45320-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23Merge branch 'perf/urgent' into perf/core, to resolve conflictIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-23EDAC, sb_edac: Remove double buffering of error recordsTony Luck
In the bad old days the functions from x86_mce_decoder_chain could be called in machine check context. So we used to carefully copy them and defer processing until later. But in f29a7aff4bd60 ("x86/mce: Avoid potential deadlock due to printk() in MCE context") we switched the logging code to save the record in a genpool, and call the functions that registered to be notified later from a work queue. So drop all the double buffering and do all the work we want to do as soon as sbridge_mce_check_error() is called. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: patrickg@supermicro.com Link: http://lkml.kernel.org/r/100025611cd780d9bca72792b2b2146760da53e0.1460756761.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit (git 2.34.1) at 2025-09-15 07:50:45 +0000