| Age | Commit message (Collapse) | Author |
|---|
|
In the case where the export MDS has crashed just after the EImportStart
journal is flushed, a standby MDS takes over for it and when replaying
the EImportStart journal the MDS will wait the client to reconnect. That
may never happen because the client may not have registered or opened
the sessions yet.
When receiving a new map, ensure we reconnect to valid export targets as
well if their sessions don't exist yet.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Print a bit more information when we can't find the realm during
ceph_add_cap. Show both the inode number and the old realm inode
number.
Suggested-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Consolidate some fiddly code for changing an inode's snap_realm
into a new helper function, and change the callers to use it.
While we're in here, nothing uses the i_snap_realm_counter field, so
remove that from the inode.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The ceph_mds_client and ceph_mds_session structures are kzalloc'ed so
there's no need to explicitly initialize either of their fields to 0.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The first thing metric_delayed_work does is check mdsc->stopping,
and then return immediately if it's set. That's good since we would
have already torn down the metric structures at this point, otherwise,
but there is no locking around mdsc->stopping.
It's possible that the ceph_metric_destroy call could race with the
delayed_work, in which case we could end up with the delayed_work
accessing destroyed percpu variables.
At this point in the mdsc teardown, the "stopping" flag has already been
set, so there's no benefit to flushing the work. Move the work
cancellation in ceph_metric_destroy ahead of the percpu variable
destruction, and eliminate the flush_delayed_work call in
ceph_mdsc_destroy.
Fixes: 18f473b384a6 ("ceph: periodically send perf metrics to MDSes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add a new vxattr that shows what MDS is authoritative for an inode (if
we happen to have auth caps). If we don't have an auth cap for the inode
then just return -1.
URL: https://tracker.ceph.com/issues/1276
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We missed these in the recent fscache rework.
Reported-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For the client requests who will have unsafe and safe replies from
MDS daemons, in the MDS side the MDS daemons won't flush the mdlog
(journal log) immediatelly, because they think it's unnecessary.
That's true for most cases but not all, likes the fsync request.
The fsync will wait until all the unsafe replied requests to be
safely replied.
Normally if there have multiple threads or clients are running, the
whole mdlog in MDS daemons could be flushed in time if any request
will trigger the mdlog submit thread. So usually we won't experience
the normal operations will stuck for a long time. But in case there
has only one client with only thread is running, the stuck phenomenon
maybe obvious and the worst case it must wait at most 5 seconds to
wait the mdlog to be flushed by the MDS's tick thread periodically.
This patch will trigger to flush the mdlog in the relevant and auth
MDSes to which the in-flight requests are sent just before waiting
the unsafe requests to finish.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
If we hit a decoding error late in the frame, then we might exit the
function without putting the pool_ns string. Ensure that we always put
that reference on the way out of the function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
Switch the driver to support the .get_state() method.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
[thierry.reding@gmail.com: add missing linux/bitfield.h include]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Current calculation for period and high_width may have 64-bit overflow.
state->period and rate are u64. rate * state->period will overflow.
clk_div = div_u64(rate * state->period, NSEC_PER_SEC)
period = div64_u64(rate * state->period, div);
high_width = div64_u64(rate * state->duty_cycle, div);
This patch is to resolve it by using mul_u64_u64_div_u64().
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Switch the driver to support the .apply() method.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.
As such lets just ifdef the code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
CC: Maurizio Lombardi <mlombard@redhat.com>
CC: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some small cleanups
- a fix for a bug when running as Xen PV guest which could result in
not all memory being transferred in case of a migration of the guest
- a small series for getting rid of code for supporting very old Xen
hypervisor versions nobody should be using since many years now
- a series for hardening the Xen block frontend driver
- a fix for Xen PV boot code issuing warning messages due to a stray
preempt_disable() on the non-boot processors
* tag 'for-linus-5.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: remove stray preempt_disable() from PV AP startup code
xen/pcifront: Removed unnecessary __ref annotation
x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk()
drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warnings
xen/blkfront: don't trust the backend response data blindly
xen/blkfront: don't take local copy of a request from the ring page
xen/blkfront: read response from backend only once
xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests
xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guests
xen: check required Xen features
xen: fix setting of max_pfn in shared_info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
|
|
Pull Xtensa updates from Max Filippov:
- fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
- add fairness to handling IRQs of the same priority
- fix pointer usage before NULL check in ISS console driver
- build system cleanups
* tag 'xtensa-20210902' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: move core-y in arch/xtensa/Makefile to arch/xtensa/Kbuild
xtensa: build platform directories unconditionally
xtensa: do not build variants directory
xtensa: remove unneeded exports
xtensa: ISS: don't use string pointer before NULL check
xtensa: add fairness to IRQ handling
xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
|
|
No need to do the full VPID based task lookup and validation of the top
waiter when the user space futex was acquired on it's behalf during the
requeue_pi operation. The task is known already and it cannot go away
before requeue_pi_wake_futex() has been invoked.
Split out the actual attach code from attach_pi_state_owner() and use that
instead of the full blown variant.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210902094414.676104881@linutronix.de
|
|
It's slightly confusing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210902094414.618613025@linutronix.de
|
|
The recent rework of the requeue PI code introduced a possibility for
going back to user space in inconsistent state:
CPU 0 CPU 1
requeue_futex()
if (lock_pifutex_user()) {
dequeue_waiter();
wake_waiter(task);
sched_in(task);
return_from_futex_syscall();
---> Inconsistent state because PI state is not established
It becomes worse if the woken up task immediately exits:
sys_exit();
attach_pistate(vpid); <--- FAIL
Attach the pi state before dequeuing and waking the waiter. If the waiter
gets a spurious wakeup before the dequeue operation it will wait in
futex_requeue_pi_wakeup_sync() and therefore cannot return and exit.
Fixes: 07d91ef510fb ("futex: Prevent requeue_pi() lock nesting issue on RT")
Reported-by: syzbot+4d1bd0725ef09168e1a0@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210902094414.558914045@linutronix.de
|
|
The check on the rt_waiter and top_waiter->pi_state is assigning an error
return code to ret but this later gets re-assigned, hence the check is
ineffective.
Return -EINVAL rather than assigning it to ret which was the original
intent.
Fixes: dc7109aaa233 ("futex: Validate waiter correctly in futex_proxy_trylock_atomic()")
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210818131840.34262-1-colin.king@canonical.com
|
|
730633f0b7f95 became the first direct caller of __init_rwsem() vs the
usual init_rwsem(), exposing PREEMPT_RT's lack thereof. Add it.
[ tglx: Move it out of line ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/50a936b7d8f12277d6ec7ed2ef0421a381056909.camel@gmx.de
|
|
The clks "main" and "mm" are prepared in .probe() (and unprepared in
.remove()). This results in the clocks being on during suspend which
results in unnecessarily increased power consumption.
Remove the clock operations from .probe() and .remove(). Add the
clk_prepare_enable() in .enable() and the clk_disable_unprepare() in
.disable().
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
[thierry.reding@gmail.com: squashed in fixup patch]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
|
- Zero-initialize pcitest param to avoid random "-d" setting (Shunyong
Yang)
* remotes/lorenzo/pci/tools:
tools: PCI: Zero-initialize param
|
|
- Make ixp4xx driver depend on ARCH_IXP4XX (Geert Uytterhoeven)
* remotes/lorenzo/pci/misc:
PCI: controller: PCI_IXP4XX should depend on ARCH_IXP4XX
|
|
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I)
- Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon
Vijay Abraham I)
- Add pci_epf_vepf_link() to link virtual function to endpoint physical
function (Kishon Vijay Abraham I)
- Add virtual function number to pci_epc_ops endpoint ops interfaces
(Kishon Vijay Abraham I)
- Simplify register base address computation for endpoint BAR configuration
(Kishon Vijay Abraham I)
- Add support to configure virtual functions in cadence endpoint driver
(Kishon Vijay Abraham I)
- Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I)
- Document configfs usage to create virtual functions for endpoints (Kishon
Vijay Abraham I)
* remotes/lorenzo/pci/endpoint:
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device
PCI: cadence: Add support to configure virtual functions
PCI: cadence: Simplify code to get register base address for configuring BAR
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: endpoint: Add support to link a physical function to a virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
|
|
- Document optional clock DT property (Michal Simek)
- Enable PCIe ref clock (Hyun Kwon)
* remotes/lorenzo/pci/xilinx-nwl:
PCI: xilinx-nwl: Enable the clock through CCF
dt-bindings: pci: xilinx-nwl: Document optional clock property
|
|
- Remove redundant dev_err() after devm_ioremap_resource() (ErKun Yang)
* remotes/lorenzo/pci/xgene:
PCI: xgene-msi: Remove redundant dev_err() call in xgene_msi_probe()
|
|
- Fix handling BME_CHGED event (Om Prakash Singh)
- Fix MSI-X programming (Om Prakash Singh)
- Disable interrupts before entering L2 (Om Prakash Singh)
- Don't allow suspend when Tegra PCIe is in EP mode (Om Prakash Singh)
* remotes/lorenzo/pci/tegra194:
PCI: tegra194: Cleanup unused code
PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode
PCI: tegra194: Disable interrupts before entering L2
PCI: tegra194: Fix MSI-X programming
PCI: tegra194: Fix handling BME_CHGED event
|
|
- Remove unused struct tegra_pcie_bus (Krzysztof Wilczyński)
* remotes/lorenzo/pci/tegra:
PCI: tegra: make const array err_msg static
PCI: tegra: Use 'seq_puts' instead of 'seq_printf'
PCI: tegra: Fix OF node reference leak
PCI: tegra: Remove unused struct tegra_pcie_bus
|
|
- Fix runtime PM imbalance in rcar_pcie_ep_probe() (Dinghao Liu)
* remotes/lorenzo/pci/rcar:
PCI: rcar: Add L1 link state fix into data abort hook
PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()
|
|
- Split DT bindings for PCIe controllers with independent MSI domains into
separate nodes for MT2712/MT7622 (Chuanjia Liu)
- Locate shared registers from "mediatek,generic-pciecfg" property
(Chuanjia Liu)
- Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix
an MSI issue (Chuanjia Liu)
- Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
PCI: mediatek: Add new method to get shared pcie-cfg base address
dt-bindings: PCI: mediatek: Update the Device tree bindings
|
|
- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth
Thokala)
* remotes/lorenzo/pci/keembay:
PCI: keembay: Add support for Intel Keem Bay
dt-bindings: PCI: Add Intel Keem Bay PCIe controller
|
|
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix BCMA probe resource handling
PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'
|
|
- Add domain_nr in struct pci_host_bridge (Boqun Feng)
- Use host bridge MSI domain for root buses if present (Boqun Feng)
- Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V)
(Boqun Feng)
- Make Hyper-V enumeration more generic (Arnd Bergmann)
- Set Hyper-V domain_nr at probe-time (Boqun Feng)
- Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng)
- Enable Hyper-V bridge probing on ARM64 (Boqun Feng)
* remotes/lorenzo/pci/hyper-v:
PCI: hv: Turn on the host bridge probing on ARM64
PCI: hv: Set up MSI domain at bridge probing time
PCI: hv: Set ->domain_nr of pci_host_bridge at probing time
PCI: hv: Generify PCI probing
arm64: PCI: Support root bridge preparation for Hyper-V
arm64: PCI: Restructure pcibios_root_bridge_prepare()
PCI: Support populating MSI domains of root buses via bridges
PCI: Introduce domain_nr in pci_host_bridge
|
|
- Support Hyper-V Create Interrupt v3 message (Sunil Muthuswamy)
* remotes/lorenzo/pci/hv:
PCI: hv: Support for create interrupt v3
|
|
- Convert bool in structs to bitfield (Kishon Vijay Abraham I)
- Work around J7200 non-PCIe SERDES lane electrical issue that prevents
PCIe link training (Nadeem Athani)
- Add J7200 PCIe support to j721e (Kishon Vijay Abraham I)
- Add AM64 PCIe support to j721e (Kishon Vijay Abraham I)
- Add J7200 and AM64 device IDs to endpoint test (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/cadence:
misc: pci_endpoint_test: Add deviceID for AM64 and J7200
PCI: j721e: Add PCIe support for AM64
PCI: j721e: Add PCIe support for J7200
PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
|
|
- Fix PIO config access status checking (Evan Wang)
- Increase config access polling delay to 1.5s (Pali Rohár)
- Add PCIe Root Capabilities to bridge emulation (Pali Rohár)
- Report Config Request Retry Status when Software Visibility enabled (Pali
Rohár)
- Add back configuration of PCIe resources from 'ranges' DT property and
pay attention to DT size and CPU/PCI offset to fix issues with I/O port
space (Pali Rohár)
- Serialize masking and unmasking legacy INTx interrupts (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Fix masking and unmasking legacy INTx interrupts
PCI: aardvark: Configure PCIe resources from 'ranges' DT property
PCI: aardvark: Fix reporting CRS value
PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response
PCI: aardvark: Fix checking for PIO status
|
|
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu)
* pci/visconti:
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
|
|
- Add Rockchip RK356X host controller driver (Simon Xue)
* pci/rockchip-dwc:
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
|
|
- Remove surplus break statement (Krzysztof Wilczyński)
* pci/dwc:
PCI: dwc: Remove surplus break statement after return
|
|
- Remove surplus break statement and local code block (Krzysztof
Wilczyński)
* pci/artpec6:
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
|
|
- Add pci_numachip_init() declaration (Krzysztof Wilczyński)
- Allocate pci_dev_str_match_path() string atomically (Dan Carpenter)
- Drop error message when Precision Time Measurement supported but not
enabled (Jakub Kicinski)
- Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron)
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Make saved capability state private to core (Bjorn Helgaas)
- Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko)
- Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET)
* pci/misc:
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
PCI: Make saved capability state private to core
PCI: Add schedule point in proc_bus_pci_read()
PCI: Correct the pci_iomap.h header guard #endif comment
PCI/PTM: Remove error message at boot
PCI: Fix pci_dev_str_match_path() alloc while atomic bug
x86/PCI: Add pci_numachip_init() declaration
# Conflicts:
# include/linux/pci.h
|
|
- Check Resource Item Names against those defined for type (Bjorn Helgaas)
- Treat initial 0xff as missing EEPROM (Heiner Kallweit)
- Reject resource tags with invalid size (Bjorn Helgaas)
- Don't check Large Resource Item Names for validity (Bjorn Helgaas)
- Allow access to valid parts of VPD if some is invalid (Bjorn Helgaas)
- Remove pci_vpd_size() old_size argument (Heiner Kallweit)
- Make pci_vpd_wait() uninterruptible (Heiner Kallweit)
- Remove struct pci_vpd.flag (Heiner Kallweit)
- Remove struct pci_vpd_ops (Heiner Kallweit)
- Remove struct pci_vpd.valid member (Heiner Kallweit)
- Embed struct pci_vpd in struct pci_dev (Heiner Kallweit)
- Determine VPD size in pci_vpd_init() (Heiner Kallweit)
- Treat invalid VPD like missing VPD capability (Heiner Kallweit)
- Add pci_vpd_alloc() to allocate buffer and read VPD into it (Heiner
Kallweit)
- Add pci_vpd_find_ro_info_keyword() (Heiner Kallweit)
- Add pci_vpd_check_csum() (Heiner Kallweit)
- Add pci_vpd_find_id_string() (Heiner Kallweit)
- Read VPD with pci_vpd_alloc() (bnx2x, bnxt, sfc, sfc falcon, tg3 drivers)
(Heiner Kallweit)
- Search VPD with pci_vpd_find_ro_info_keyword() (bnx2, bnx2x, bnxt, cxgb4,
cxlflash SCSI, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit)
- Search VPD with pci_vpd_find_id_string() (cxgb4 driver) (Heiner Kallweit)
- Validate VPD checksum with pci_vpd_check_csum() (cxgb4, tg3 drivers)
(Heiner Kallweit)
- Replace open-coded byte swapping with swab32s() in bnx2 (Heiner Kallweit)
- Remove unused vpd_param member ec (Heiner Kallweit)
- Stop exporting pci_vpd_find_tag(), pci_vpd_find_info_keyword() (Heiner
Kallweit)
- Move several VPD defines and inlines to internal PCI core (Heiner
Kallweit)
* pci/vpd:
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword()
cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()
cxgb4: Remove unused vpd_param member ec
cxgb4: Validate VPD checksum with pci_vpd_check_csum()
bnxt: Search VPD with pci_vpd_find_ro_info_keyword()
bnxt: Read VPD with pci_vpd_alloc()
bnx2x: Search VPD with pci_vpd_find_ro_info_keyword()
bnx2x: Read VPD with pci_vpd_alloc()
bnx2: Replace open-coded byte swapping with swab32s()
bnx2: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: falcon: Read VPD with pci_vpd_alloc()
tg3: Search VPD with pci_vpd_find_ro_info_keyword()
tg3: Validate VPD checksum with pci_vpd_check_csum()
tg3: Read VPD with pci_vpd_alloc()
sfc: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: Read VPD with pci_vpd_alloc()
PCI/VPD: Add pci_vpd_check_csum()
PCI/VPD: Add pci_vpd_find_ro_info_keyword()
PCI/VPD: Add pci_vpd_alloc()
PCI/VPD: Treat invalid VPD like missing VPD capability
PCI/VPD: Determine VPD size in pci_vpd_init()
PCI/VPD: Embed struct pci_vpd in struct pci_dev
PCI/VPD: Remove struct pci_vpd.valid member
PCI/VPD: Remove struct pci_vpd_ops
PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd()
PCI/VPD: Remove struct pci_vpd.flag
PCI/VPD: Make pci_vpd_wait() uninterruptible
PCI/VPD: Remove pci_vpd_size() old_size argument
PCI/VPD: Allow access to valid parts of VPD if some is invalid
PCI/VPD: Don't check Large Resource Item Names for validity
PCI/VPD: Reject resource tags with invalid size
PCI/VPD: Treat initial 0xff as missing EEPROM
PCI/VPD: Check Resource Item Names against those valid for type
PCI/VPD: Correct diagnostic for VPD read failure
|
|
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Enforce pci=noats with Transaction Blocking (Alex Williamson)
* pci/virtualization:
PCI/ACS: Enforce pci=noats with Transaction Blocking
PCI: Add ACS quirks for Cavium multi-function devices
PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
|
