summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-12dt-bindings: incomplete-devices: document devices without bindingsKrzysztof Kozlowski
There are devices in the wild with non-updatable firmware coming with ACPI tables with rejected compatibles, e.g. "ltr,ltrf216a". Linux kernel still supports this device via ACPI PRP0001, however the compatible was never accepted to bindings. There are also several early PowerPC or SPARC platforms using compatibles for their OpenFirmware, but without in-tree DTS. Often the legacy compatible is not correct in terms of current Devicetree specification, e.g. missing vendor prefix. Finally there are also Linux-specific tools and test code with compatibles. Add a schema covering above cases purely to satisfy the DT schema and scripts/checkpatch.pl checks for undocumented compatibles. For ltr,ltrf216a this also documents the consensus: compatible is allowed only via ACPI PRP0001, but not bindings. Link: https://lore.kernel.org/all/20240705095047.90558-1-marex@denx.de/ Link: https://lore.kernel.org/lkml/20220731173446.7400bfa8@jic23-huawei/T/#me55be502302d70424a85368c2645c89f860b7b40 Cc: Marek Vasut <marex@denx.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240712121146.90942-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-12Merge tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A fix for a possible use-after-free following "rbd unmap" or "umount" marked for stable and two kernel-doc fixups" * tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client: libceph: fix crush_choose_firstn() kernel-doc warnings libceph: suppress crush_choose_indep() kernel-doc warnings libceph: fix race between delayed_work() and ceph_monc_stop()
2024-07-12Merge tag 'pmdomain-v6.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fix from Ulf Hansson: - qcom: Skip retention level for rpmhpd's * tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
2024-07-12Merge tag 'mmc-v6.10-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - davinci_mmc: Prevent transmitted data size from exceeding sgm's length - sdhci: Fix max_seg_size for 64KiB PAGE_SIZE * tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
2024-07-12nfsd: nfsd_file_lease_notifier_call gets a file_lease as an argumentJeff Layton
"data" actually refers to a file_lease and not a file_lock. Both structs have their file_lock_core as the first field though, so this bug should be harmless without struct randomization in play. Reported-by: Florian Evers <florian-evers@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219008 Fixes: 05580bbfc6bc ("nfsd: adapt to breakup of struct file_lock") Signed-off-by: Jeff Layton <jlayton@kernel.org> Tested-by: Florian Evers <florian-evers@gmx.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-07-12perf trace: Fix iteration of syscall ids in syscalltbl->entriesHoward Chu
This is a bug found when implementing pretty-printing for the landlock_add_rule system call, I decided to send this patch separately because this is a serious bug that should be fixed fast. I wrote a test program to do landlock_add_rule syscall in a loop, yet perf trace -e landlock_add_rule freezes, giving no output. This bug is introduced by the false understanding of the variable "key" below: ``` for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) { struct syscall *sc = trace__syscall_info(trace, NULL, key); ... } ``` The code above seems right at the beginning, but when looking at syscalltbl.c, I found these lines: ``` for (i = 0; i <= syscalltbl_native_max_id; ++i) if (syscalltbl_native[i]) ++nr_entries; entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries); ... for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) { if (syscalltbl_native[i]) { entries[j].name = syscalltbl_native[i]; entries[j].id = i; ++j; } } ``` meaning the key is merely an index to traverse the syscall table, instead of the actual syscall id for this particular syscall. So if one uses key to do trace__syscall_info(trace, NULL, key), because key only goes up to trace->sctbl->syscalls.nr_entries, for example, on my X86_64 machine, this number is 373, it will end up neglecting all the rest of the syscall, in my case, everything after `rseq`, because the traversal will stop at 373, and `rseq` is the last syscall whose id is lower than 373 in tools/perf/arch/x86/include/generated/asm/syscalls_64.c: ``` ... [334] = "rseq", [424] = "pidfd_send_signal", ... ``` The reason why the key is scrambled but perf trace works well is that key is used in trace__syscall_info(trace, NULL, key) to do trace->syscalls.table[id], this makes sure that the struct syscall returned actually has an id the same value as key, making the later bpf_prog matching all correct. After fixing this bug, I can do perf trace on 38 more syscalls, and because more syscalls are visible, we get 8 more syscalls that can be augmented. before: perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" after perf $ perf trace -vv --max-events=1 |& grep Reusing Reusing "open" BPF sys_enter augmenter for "stat" Reusing "open" BPF sys_enter augmenter for "lstat" Reusing "open" BPF sys_enter augmenter for "access" Reusing "connect" BPF sys_enter augmenter for "accept" Reusing "sendto" BPF sys_enter augmenter for "recvfrom" Reusing "connect" BPF sys_enter augmenter for "bind" Reusing "connect" BPF sys_enter augmenter for "getsockname" Reusing "connect" BPF sys_enter augmenter for "getpeername" Reusing "open" BPF sys_enter augmenter for "execve" Reusing "open" BPF sys_enter augmenter for "truncate" Reusing "open" BPF sys_enter augmenter for "chdir" Reusing "open" BPF sys_enter augmenter for "mkdir" Reusing "open" BPF sys_enter augmenter for "rmdir" Reusing "open" BPF sys_enter augmenter for "creat" Reusing "open" BPF sys_enter augmenter for "link" Reusing "open" BPF sys_enter augmenter for "unlink" Reusing "open" BPF sys_enter augmenter for "symlink" Reusing "open" BPF sys_enter augmenter for "readlink" Reusing "open" BPF sys_enter augmenter for "chmod" Reusing "open" BPF sys_enter augmenter for "chown" Reusing "open" BPF sys_enter augmenter for "lchown" Reusing "open" BPF sys_enter augmenter for "mknod" Reusing "open" BPF sys_enter augmenter for "statfs" Reusing "open" BPF sys_enter augmenter for "pivot_root" Reusing "open" BPF sys_enter augmenter for "chroot" Reusing "open" BPF sys_enter augmenter for "acct" Reusing "open" BPF sys_enter augmenter for "swapon" Reusing "open" BPF sys_enter augmenter for "swapoff" Reusing "open" BPF sys_enter augmenter for "delete_module" Reusing "open" BPF sys_enter augmenter for "setxattr" Reusing "open" BPF sys_enter augmenter for "lsetxattr" Reusing "openat" BPF sys_enter augmenter for "fsetxattr" Reusing "open" BPF sys_enter augmenter for "getxattr" Reusing "open" BPF sys_enter augmenter for "lgetxattr" Reusing "openat" BPF sys_enter augmenter for "fgetxattr" Reusing "open" BPF sys_enter augmenter for "listxattr" Reusing "open" BPF sys_enter augmenter for "llistxattr" Reusing "open" BPF sys_enter augmenter for "removexattr" Reusing "open" BPF sys_enter augmenter for "lremovexattr" Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr" Reusing "open" BPF sys_enter augmenter for "mq_open" Reusing "open" BPF sys_enter augmenter for "mq_unlink" Reusing "fsetxattr" BPF sys_enter augmenter for "add_key" Reusing "fremovexattr" BPF sys_enter augmenter for "request_key" Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch" Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat" Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat" Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat" Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat" Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "linkat" Reusing "open" BPF sys_enter augmenter for "symlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat" Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat" Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat" Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat" Reusing "connect" BPF sys_enter augmenter for "accept4" Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at" Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2" Reusing "open" BPF sys_enter augmenter for "memfd_create" Reusing "fremovexattr" BPF sys_enter augmenter for "execveat" Reusing "fremovexattr" BPF sys_enter augmenter for "statx" TL;DR: These are the new syscalls that can be augmented Reusing "openat" BPF sys_enter augmenter for "open_tree" Reusing "openat" BPF sys_enter augmenter for "openat2" Reusing "openat" BPF sys_enter augmenter for "mount_setattr" Reusing "openat" BPF sys_enter augmenter for "move_mount" Reusing "open" BPF sys_enter augmenter for "fsopen" Reusing "openat" BPF sys_enter augmenter for "fspick" Reusing "openat" BPF sys_enter augmenter for "faccessat2" Reusing "openat" BPF sys_enter augmenter for "fchmodat2" as for the perf trace output: before perf $ perf trace -e faccessat2 --max-events=1 [no output] after perf $ ./perf trace -e faccessat2 --max-events=1 0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0 P.S. The reason why this bug was not found in the past five years is probably because it only happens to the newer syscalls whose id is greater, for instance, faccessat2 of id 439, which not a lot of people care about when using perf trace. [Arnaldo]: notes That and the fact that the BPF code was hidden before having to use -e, that got changed kinda recently when we switched to using BPF skels for augmenting syscalls in 'perf trace': ⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c a9f4c6c999008c92 perf trace: Collect sys_nanosleep first argument 29d16de26df17e94 perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h 5069211e2f0b47e7 perf trace: Use the right bpf_probe_read(_str) variant for reading user data 33b725ce7b988756 perf trace: Avoid compile error wrt redefining bool 7d9642311b6d9d31 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two. 262b54b6c9396823 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two. 1836480429d173c0 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr) cd2cece61ac5f900 perf trace: Tidy comments related to BPF + syscall augmentation 5e6da6be3082f77b perf trace: Migrate BPF augmentation to use a skeleton ⬢[acme@toolbox perf-tools-next]$ ⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be3082f77b | head -1 5e6da6be3082f77b (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10) ⬢[acme@toolbox perf-tools-next]$ I.e. from August, 2023. One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all it needs is available on the system. I simplified the code to not expose the 'struct syscall' outside of tools/perf/util/syscalltbl.c, instead providing a function to go from the index to the syscall id: int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx); Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1 Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12cgroup: Add Michal Koutný as a maintainerTejun Heo
Michal has been contributing and reviewing patches across cgroup for a while now. Add him as a maintainer. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Koutný <mkoutny@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-12cgroup/misc: Introduce misc.events.localXiu Jianfeng
Currently the event counting provided by misc.events is hierarchical, it's not practical if user is only concerned with events of a specified cgroup. Therefore, introduce misc.events.local collect events specific to the given cgroup. This is analogous to memory.events.local and pids.events.local. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-07-12dm: introduce the target flag mempool_needs_integrityMikulas Patocka
This commit introduces the dm target flag mempool_needs_integrity. When the flag is set, device mapper will call bioset_integrity_create on it's bio sets. The target can then call bio_integrity_alloc on the bios allocated from the table's mempool. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-07-12perf dso: Fix address sanitizer buildIan Rogers
Various files had been missed from having accessor functions added for the sake of dso reference count checking. Add the function calls and missing dso accessor functions. Fixes: ee756ef7491e ("perf dso: Add reference count checking and accessor functions") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yunseong Kim <yskelg@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf mem: Warn if memory events are not supported on all CPUsLeo Yan
It is possible that memory events are not supported on all CPUs. Prints a warning by dumping the enabled CPU maps in this case. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf arm-spe: Support multiple Arm SPE PMUsLeo Yan
A platform can have more than one Arm SPE PMU. For example, a system with multiple clusters may have each cluster enabled with its own Arm SPE instance. In such case, the PMU devices will be named 'arm_spe_0', 'arm_spe_1', and so on. Currently, the tool only supports 'arm_spe_0'. This commit extends support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'. Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf build x86: Fix SC2034 error in syscalltbl.shHaoze Xie
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_' when reading from '$sorted_table'. This change allows the script to pass tests of ShellCheck before and after version 0.7.2 at the same time. When building in arch x86, syscalltbl.sh got a ShellCheck warning, which makes compilation error: In arch/x86/entry/syscalls/syscalltbl.sh line 27: while read nr _abi name entry _compat; do ^-^ SC2034: abi appears unused. Verify use (or export if used externally). ^----^ SC2034: compat appears unused. Verify use (or export if used externally). The script reads unused param abi and compat. It uses format '_xxx' to indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2. According to SC2034, the more general way of writing is to use directly '_' to indicate discarding vars. 'entry' is also replaced by '_' because it just happens to be defined in emit function, otherwise it will lead to some misunderstandings. Link: https://www.shellcheck.net/wiki/SC2034 Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf record: Fix memset out-of-range errorHaoze Xie
Modified the object of 'memset' from '&lost.lost' to '&lost' in record__read_lost_samples. This allows 'memset' to access memory properly without causing out-of-bounds problems. The problems got from builtin-record.c are: In file included from /usr/include/string.h:495, from util/parse-events.h:13, from builtin-record.c:14: In function 'memset', inlined from 'record__read_lost_samples' at builtin-record.c:1958:6, inlined from '__cmd_record.constprop' at builtin-record.c:2817:2: /usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error: '__builtin_memset' offset [17, 64] from the object at 'lost' is out of the bounds of referenced subobject 'lost' with type 'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds] 71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The error arised when performing a memset operation on the 'lost' variable, the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64 and 16. Fixes: 6c1785cd75ef ("perf record: Ensure space for lost samples") Signed-off-by: Haoze Xie <royenheart@gmail.com> Signed-off-by: Yuan Tan <tanyuan@tinylab.org> Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add --fuzzy-name option for fuzzy matching in task namesMadadi Vineeth Reddy
The --fuzzy-name option can be used if fuzzy name matching is required. For example, "taskname" can be matched to any string that contains "taskname" as its substring. Sample output for --task-name wdav --fuzzy-name ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs Suggested-by: Chen Yu <yu.c.chen@intel.com> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Link: https://lore.kernel.org/r/20240707182716.22054-4-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add support for multiple task names using CSVMadadi Vineeth Reddy
To track the scheduling patterns of multiple tasks simultaneously, multiple task names can be specified using a comma separator without any whitespace. Sample output for --task-name perf,wdavdaemon ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 . *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 ... . *- . . . . . . 131041.395649 secs . . . . . . . *X2 131041.403969 secs X2 => perf:70211 . . . . . . . *- 131041.404006 secs Suggested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-3-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12perf sched map: Add task-name option to filter the output mapMadadi Vineeth Reddy
By default, perf sched map prints sched-in events for all the tasks which may not be required all the time as it prints lot of symbols and rows to the terminal. With --task-name option, one could specify the specific task name for which the map has to be shown. This would help in analyzing the CPU usage patterns easier for that specific task. Since multiple PID's might have the same task name, using task-name filter would be more useful for debugging. For other tasks, instead of printing the symbol, '-' is printed and the same '.' is used to represent idle. '-' is used instead of symbol for other tasks because it helps in clear visualization of task of interest and secondly the symbol itself doesn't mean anything because the sched-in of that symbol will not be printed(first sched-in contains pid and the corresponding symbol). When using the --task-name option, the sched-out time is represented by a '*-'. Since not all task sched-in events are printed, the sched-out time of the relevant task might be lost. This representation ensures that the sched-out time of the interested task is not overlooked. 6.10.0-rc1 ========== *A0 131040.639793 secs A0 => migration/0:19 *. 131040.639801 secs . => swapper:0 . *B0 131040.639830 secs B0 => migration/1:24 . *. 131040.639836 secs . . *C0 131040.640108 secs C0 => migration/2:30 . . *. 131040.640163 secs . . . *D0 131040.640386 secs D0 => migration/3:36 . . . *. 131040.640395 secs 6.10.0-rc1 + patch (--task-name wdavdaemon) ============= . *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509 . A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274 - *- B0 . . . - . 131040.641379 secs *C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283 C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277 C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270 *- . B0 . D0 . E0 . 131040.641581 secs . . B0 . D0 . *- . 131040.641583 secs Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com> Cc: Chen Yu <yu.c.chen@intel.com> Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-07-12Fix the unbalanced pm_runtime_enable in wcd937x-sdwMark Brown
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>: This patch set change will fix the unbalanced pm_runtime_enable in wcd937x-sdw soundwire slave. And removed the string compare with widget name in MIC BIAS settings, instead of string compare use the MIC BIAS id's as value. Removed separate handling for vdd-buck regulator supply which is not required. The vdd-buck regulator supply enabled using bulk enable. Added the error handling in wcd937x_probe() and disable the regulators in error case.
2024-07-12HID: hid-steam: Fix typo in goto labelThorsten Blum
s/stream/steam/ Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Link: https://patch.msgid.link/20240705045458.65108-2-thorsten.blum@toblux.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12HID: mcp2221: Remove unnecessary semicolonChen Ni
Remove unnecessary semicolon at the end of the switch statement. This is detected by coccinelle. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20240709012223.17393-1-nichen@iscas.ac.cn Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12HID: Fix spelling mistakes "Kensigton" -> "Kensington"Colin Ian King
There are spelling mistakes in a comment and in the module description. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20240711083513.282724-1-colin.i.king@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-12selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep againDaniel Borkmann
Revert commit 90dc946059b7 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c179a377 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] #89/11 fexit_bpf2bpf/func_replace_global_func:OK #89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK #89/13 fexit_bpf2bpf/func_replace_progmap:OK #89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
2024-07-12kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macrosEric Chan
Introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros to provide assert-type equivalents for memory comparison. While KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ are available for expectations, the addition of these new macros ensures that assertions can also be used for memory comparisons, enhancing the consistency and completeness of the kunit framework. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readabilityEric Chan
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION with different tpye of kunit_assert_type. The current naming of KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their similarities. To improve readability and symmetry, renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical. Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to clarify its usage. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertionEric Chan
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the comment to correctly refer to it as such. Signed-off-by: Eric Chan <ericchancf@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12kunit: executor: Simplify string allocation handlingKees Cook
The alloc/copy code pattern is better consolidated to single kstrdup (and kstrndup) calls instead. This gets rid of deprecated[1] strncpy() uses as well. Replace one other strncpy() use with the more idiomatic strscpy(). Link: https://github.com/KSPP/linux/issues/90 [1] Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-07-12Merge tag 'arm-fixes-6.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of these changes are Qualcomm SoC specific and came in just after I sent out the last set of fixes. This includes two regression fixes for SoC drivers, a defconfig change to ensure the Lenovo X13s is usable and 11 changes to DT files to fix regressions and minor platform specific issues. Tony and Chunyan step back from their respective maintainership roles on the omap and unisoc platforms, and Christophe in turn takes over maintaining some of the Freescale SoC drivers that he has been taking care of in practice already. Lastly, there are two trivial fixes for the davinci and sunxi platforms" * tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY MAINTAINERS: Add more maintainers for omaps ARM: davinci: Convert comma to semicolon MAINTAINERS: Move myself from SPRD Maintainer to Reviewer Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries" arm64: dts: qcom: qdu1000: Fix LLCC reg property arm64: dts: qcom: sm6115: add iommu for sdhc_1 arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping soc: qcom: pmic_glink: disable UCSI on sc8280xp arm64: defconfig: enable Elan i2c-hid driver arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer arm64: dts: allwinner: Fix PMIC interrupt number arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers arm64: dts: qcom: sc8180x: Fix LLCC reg property again
2024-07-12Merge branch 'iommu/iommufd/paging-domain-alloc' into iommu/nextWill Deacon
* iommu/iommufd/paging-domain-alloc: RDMA/usnic: Use iommu_paging_domain_alloc() wifi: ath11k: Use iommu_paging_domain_alloc() wifi: ath10k: Use iommu_paging_domain_alloc() drm/msm: Use iommu_paging_domain_alloc() vhost-vdpa: Use iommu_paging_domain_alloc() vfio/type1: Use iommu_paging_domain_alloc() iommufd: Use iommu_paging_domain_alloc() iommu: Add iommu_paging_domain_alloc() interface
2024-07-12Merge branch 'iommu/iommufd/attach-handles' into iommu/nextWill Deacon
* iommu/iommufd/attach-handles: iommu: Extend domain attach group with handle support iommu: Add attach handle to struct iopf_group iommu: Remove sva handle list iommu: Introduce domain attachment handle
2024-07-12Merge branch 'iommu/pci/ats' into iommu/nextWill Deacon
* iommu/pci/ats: arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP iommu/of: Support ats-supported device-tree property dt-bindings: PCI: generic: Add ats-supported property
2024-07-12Merge branch 'iommu/fwspec-ops-removal' into iommu/nextWill Deacon
* iommu/fwspec-ops-removal: iommu: Remove iommu_fwspec ops OF: Simplify of_iommu_configure() ACPI: Retire acpi_iommu_fwspec_ops() iommu: Resolve fwspec ops automatically iommu/mediatek-v1: Clean up redundant fwspec checks [will: Fixed conflict in drivers/iommu/tegra-smmu.c between fwspec ops removal and fwspec driver fix as per Robin and Jon]
2024-07-12riscv: set trap vector earlieryang.zhang
The exception vector of the booting hart is not set before enabling the mmu and then still points to the value of the previous firmware, typically _start. That makes it hard to debug setup_vm() when bad things happen. So fix that by setting the exception vector earlier. Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: yang.zhang <yang.zhang@hexintek.com> Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12Merge patch series "riscv: Apply Zawrs when available"Palmer Dabbelt
Andrew Jones <ajones@ventanamicro.com> says: Zawrs provides two instructions (wrs.nto and wrs.sto), where both are meant to allow the hart to enter a low-power state while waiting on a store to a memory location. The instructions also both wait an implementation-defined "short" duration (unless the implementation terminates the stall for another reason). The difference is that while wrs.sto will terminate when the duration elapses, wrs.nto, depending on configuration, will either just keep waiting or an ILL exception will be raised. Linux will use wrs.nto, so if platforms have an implementation which falls in the "just keep waiting" category (which is not expected), then it should _not_ advertise Zawrs in the hardware description. Like wfi (and with the same {m,h}status bits to configure it), when wrs.nto is configured to raise exceptions it's expected that the higher privilege level will see the instruction was a wait instruction, do something, and then resume execution following the instruction. For example, KVM does configure exceptions for wfi (hstatus.VTW=1) and therefore also for wrs.nto. KVM does this for wfi since it's better to allow other tasks to be scheduled while a VCPU waits for an interrupt. For waits such as those where wrs.nto/sto would be used, which are typically locks, it is also a good idea for KVM to be involved, as it can attempt to schedule the lock holding VCPU. This series starts with Christoph's addition of the riscv smp_cond_load_relaxed function which applies wrs.sto when available. That patch has been reworked to use wrs.nto and to use the same approach as Arm for the wait loop, since we can't have arbitrary C code between the load-reserved and the wrs. Then, hwprobe support is added (since the instructions are also usable from usermode), and finally KVM is taught about wrs.nto, allowing guests to see and use the Zawrs extension. We still don't have test results from hardware, and it's not possible to prove that using Zawrs is a win when testing on QEMU, not even when oversubscribing VCPUs to guests. However, it is possible to use KVM selftests to force a scenario where we can prove Zawrs does its job and does it well. [4] is a test which does this and, on my machine, without Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25 seconds. This series is also available here [1]. In order to use QEMU for testing a build with [2] is needed. In order to enable guests to use Zawrs with KVM using kvmtool, the branch at [3] may be used. [1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/ [2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/ [3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/ [4] https://github.com/jones-drew/linux/commit/cb2beccebcece10881db842ed69bdd5715cfab5d Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com * b4-shazam-merge: KVM: riscv: selftests: Add Zawrs extension to get-reg-list test KVM: riscv: Support guest wrs.nto riscv: hwprobe: export Zawrs ISA extension riscv: Add Zawrs support for spinlocks dt-bindings: riscv: Add Zawrs ISA extension description riscv: Provide a definition for 'pause' Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12KVM: riscv: selftests: Add Zawrs extension to get-reg-list testAndrew Jones
KVM RISC-V allows the Zawrs extension for the Guest/VM, so add it to the get-reg-list test. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240426100820.14762-14-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12KVM: riscv: Support guest wrs.ntoAndrew Jones
When a guest traps on wrs.nto, call kvm_vcpu_on_spin() to attempt to yield to the lock holding VCPU. Also extend the KVM ISA extension ONE_REG interface to allow KVM userspace to detect and enable the Zawrs extension for the Guest/VM. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240426100820.14762-13-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12Merge branch 'iommu/core' into iommu/nextWill Deacon
* iommu/core: docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst iommufd: Use atomic_long_try_cmpxchg() in incr_user_locked_vm() iommu/iova: Add missing MODULE_DESCRIPTION() macro iommu/dma: Prune redundant pgprot arguments iommu: Make iommu_sva_domain_alloc() static
2024-07-12Merge branch 'use-overflow-h-helpers-to-check-for-overflows'Alexei Starovoitov
Shung-Hsi Yu says: ==================== Use overflow.h helpers to check for overflows This patch set refactors kernel/bpf/verifier.c to use type-agnostic, generic overflow-check helpers defined in include/linux/overflow.h to check for addition and subtraction overflow, and drop the signed_*_overflows() helpers we currently have in kernel/bpf/verifier.c; with a fix for overflow check in adjust_jmp_off() in patch 1. There should be no functional change in how the verifier works and the main motivation is to make future refactoring[1] easier. While check_mul_overflow() also exists and could potentially replace what we have in scalar*_min_max_mul(), it does not help with refactoring and would either change how the verifier works (e.g. lifting restriction on umax<=U32_MAX and u32_max<=U16_MAX) or make the code slightly harder to read, so it is left for future endeavour. Changes from v2 <https://lore.kernel.org/r/20240701055907.82481-1-shung-hsi.yu@suse.com> - add fix for 5337ac4c9b80 ("bpf: Fix the corner case with may_goto and jump to the 1st insn.") to correct the overflow check for general jump instructions - adapt to changes in commit 5337ac4c9b80 ("bpf: Fix the corner case with may_goto and jump to the 1st insn.") - refactor in adjust_jmp_off() as well and remove signed_add16_overflow() Changes from v1 <https://lore.kernel.org/r/20240623070324.12634-1-shung-hsi.yu@suse.com>: - use pointers to values in dst_reg directly as the sum/diff pointer and remove the else branch (Jiri) - change local variables to be dst_reg pointers instead of src_reg values - include comparison of generated assembly before & after the change (Alexei) 1: https://github.com/kernel-patches/bpf/pull/7205/commits ==================== Link: https://lore.kernel.org/r/20240712080127.136608-1-shung-hsi.yu@suse.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-12Merge branch 'iommu/qualcomm/msm' into iommu/nextWill Deacon
* iommu/qualcomm/msm: dt-bindings: iommu: Convert msm,iommu-v0 to yaml dt-bindings: iommu: qcom,iommu: Add MSM8953 GPU IOMMU to SMMUv2 compatibles
2024-07-12bpf: use check_sub_overflow() to check for subtraction overflowsShung-Hsi Yu
Similar to previous patch that drops signed_add*_overflows() and uses (compiler) builtin-based check_add_overflow(), do the same for signed_sub*_overflows() and replace them with the generic check_sub_overflow() to make future refactoring easier and have the checks implemented more efficiently. Unsigned overflow check for subtraction does not use helpers and are simple enough already, so they're left untouched. After the change GCC 13.3.0 generates cleaner assembly on x86_64: if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) || 139bf: mov 0x28(%r12),%rax 139c4: mov %edx,0x54(%r12) 139c9: sub %r11,%rax 139cc: mov %rax,0x28(%r12) 139d1: jo 14627 <adjust_reg_min_max_vals+0x1237> check_sub_overflow(*dst_smax, src_reg->smin_value, dst_smax)) { 139d7: mov 0x30(%r12),%rax 139dc: sub %r9,%rax 139df: mov %rax,0x30(%r12) if (check_sub_overflow(*dst_smin, src_reg->smax_value, dst_smin) || 139e4: jo 14627 <adjust_reg_min_max_vals+0x1237> ... *dst_smin = S64_MIN; 14627: movabs $0x8000000000000000,%rax 14631: mov %rax,0x28(%r12) *dst_smax = S64_MAX; 14636: sub $0x1,%rax 1463a: mov %rax,0x30(%r12) Before the change it gives: if (signed_sub_overflows(dst_reg->smin_value, smax_val) || 13a50: mov 0x28(%r12),%rdi 13a55: mov %edx,0x54(%r12) dst_reg->smax_value = S64_MAX; 13a5a: movabs $0x7fffffffffffffff,%rdx 13a64: mov %eax,0x50(%r12) dst_reg->smin_value = S64_MIN; 13a69: movabs $0x8000000000000000,%rax s64 res = (s64)((u64)a - (u64)b); 13a73: mov %rdi,%rsi 13a76: sub %rcx,%rsi if (b < 0) 13a79: test %rcx,%rcx 13a7c: js 145ea <adjust_reg_min_max_vals+0x119a> if (signed_sub_overflows(dst_reg->smin_value, smax_val) || 13a82: cmp %rsi,%rdi 13a85: jl 13ac7 <adjust_reg_min_max_vals+0x677> signed_sub_overflows(dst_reg->smax_value, smin_val)) { 13a87: mov 0x30(%r12),%r8 s64 res = (s64)((u64)a - (u64)b); 13a8c: mov %r8,%rax 13a8f: sub %r9,%rax return res > a; 13a92: cmp %rax,%r8 13a95: setl %sil if (b < 0) 13a99: test %r9,%r9 13a9c: js 147d1 <adjust_reg_min_max_vals+0x1381> dst_reg->smax_value = S64_MAX; 13aa2: movabs $0x7fffffffffffffff,%rdx dst_reg->smin_value = S64_MIN; 13aac: movabs $0x8000000000000000,%rax if (signed_sub_overflows(dst_reg->smin_value, smax_val) || 13ab6: test %sil,%sil 13ab9: jne 13ac7 <adjust_reg_min_max_vals+0x677> dst_reg->smin_value -= smax_val; 13abb: mov %rdi,%rax dst_reg->smax_value -= smin_val; 13abe: mov %r8,%rdx dst_reg->smin_value -= smax_val; 13ac1: sub %rcx,%rax dst_reg->smax_value -= smin_val; 13ac4: sub %r9,%rdx 13ac7: mov %rax,0x28(%r12) ... 13ad1: mov %rdx,0x30(%r12) ... if (signed_sub_overflows(dst_reg->smin_value, smax_val) || 145ea: cmp %rsi,%rdi 145ed: jg 13ac7 <adjust_reg_min_max_vals+0x677> 145f3: jmp 13a87 <adjust_reg_min_max_vals+0x637> Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20240712080127.136608-4-shung-hsi.yu@suse.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-12bpf: use check_add_overflow() to check for addition overflowsShung-Hsi Yu
signed_add*_overflows() was added back when there was no overflow-check helper. With the introduction of such helpers in commit f0907827a8a91 ("compiler.h: enable builtin overflow checkers and add fallback code"), we can drop signed_add*_overflows() in kernel/bpf/verifier.c and use the generic check_add_overflow() instead. This will make future refactoring easier, and takes advantage of compiler-emitted hardware instructions that efficiently implement these checks. After the change GCC 13.3.0 generates cleaner assembly on x86_64: err = adjust_scalar_min_max_vals(env, insn, dst_reg, *src_reg); 13625: mov 0x28(%rbx),%r9 /* r9 = src_reg->smin_value */ 13629: mov 0x30(%rbx),%rcx /* rcx = src_reg->smax_value */ ... if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) || 141c1: mov %r9,%rax 141c4: add 0x28(%r12),%rax 141c9: mov %rax,0x28(%r12) 141ce: jo 146e4 <adjust_reg_min_max_vals+0x1294> check_add_overflow(*dst_smax, src_reg->smax_value, dst_smax)) { 141d4: add 0x30(%r12),%rcx 141d9: mov %rcx,0x30(%r12) if (check_add_overflow(*dst_smin, src_reg->smin_value, dst_smin) || 141de: jo 146e4 <adjust_reg_min_max_vals+0x1294> ... *dst_smin = S64_MIN; 146e4: movabs $0x8000000000000000,%rax 146ee: mov %rax,0x28(%r12) *dst_smax = S64_MAX; 146f3: sub $0x1,%rax 146f7: mov %rax,0x30(%r12) Before the change it gives: s64 smin_val = src_reg->smin_value; 675: mov 0x28(%rsi),%r8 s64 smax_val = src_reg->smax_value; u64 umin_val = src_reg->umin_value; u64 umax_val = src_reg->umax_value; 679: mov %rdi,%rax /* rax = dst_reg */ if (signed_add_overflows(dst_reg->smin_value, smin_val) || 67c: mov 0x28(%rdi),%rdi /* rdi = dst_reg->smin_value */ u64 umin_val = src_reg->umin_value; 680: mov 0x38(%rsi),%rdx u64 umax_val = src_reg->umax_value; 684: mov 0x40(%rsi),%rcx s64 res = (s64)((u64)a + (u64)b); 688: lea (%r8,%rdi,1),%r9 /* r9 = dst_reg->smin_value + src_reg->smin_value */ return res < a; 68c: cmp %r9,%rdi 68f: setg %r10b /* r10b = (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value */ if (b < 0) 693: test %r8,%r8 696: js 72b <scalar_min_max_add+0xbb> signed_add_overflows(dst_reg->smax_value, smax_val)) { dst_reg->smin_value = S64_MIN; dst_reg->smax_value = S64_MAX; 69c: movabs $0x7fffffffffffffff,%rdi s64 smax_val = src_reg->smax_value; 6a6: mov 0x30(%rsi),%r8 dst_reg->smin_value = S64_MIN; 6aa: 00 00 00 movabs $0x8000000000000000,%rsi if (signed_add_overflows(dst_reg->smin_value, smin_val) || 6b4: test %r10b,%r10b /* (dst_reg->smin_value + src_reg->smin_value) > dst_reg->smin_value ? goto 6cb */ 6b7: jne 6cb <scalar_min_max_add+0x5b> signed_add_overflows(dst_reg->smax_value, smax_val)) { 6b9: mov 0x30(%rax),%r10 /* r10 = dst_reg->smax_value */ s64 res = (s64)((u64)a + (u64)b); 6bd: lea (%r10,%r8,1),%r11 /* r11 = dst_reg->smax_value + src_reg->smax_value */ if (b < 0) 6c1: test %r8,%r8 6c4: js 71e <scalar_min_max_add+0xae> if (signed_add_overflows(dst_reg->smin_value, smin_val) || 6c6: cmp %r11,%r10 /* (dst_reg->smax_value + src_reg->smax_value) <= dst_reg->smax_value ? goto 723 */ 6c9: jle 723 <scalar_min_max_add+0xb3> } else { dst_reg->smin_value += smin_val; dst_reg->smax_value += smax_val; } 6cb: mov %rsi,0x28(%rax) ... 6d5: mov %rdi,0x30(%rax) ... if (signed_add_overflows(dst_reg->smin_value, smin_val) || 71e: cmp %r11,%r10 721: jl 6cb <scalar_min_max_add+0x5b> dst_reg->smin_value += smin_val; 723: mov %r9,%rsi dst_reg->smax_value += smax_val; 726: mov %r11,%rdi 729: jmp 6cb <scalar_min_max_add+0x5b> return res > a; 72b: cmp %r9,%rdi 72e: setl %r10b 732: jmp 69c <scalar_min_max_add+0x2c> 737: nopw 0x0(%rax,%rax,1) Note: unlike adjust_ptr_min_max_vals() and scalar*_min_max_add(), it is necessary to introduce intermediate variable in adjust_jmp_off() to keep the functional behavior unchanged. Without an intermediate variable imm/off will be altered even on overflow. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20240712080127.136608-3-shung-hsi.yu@suse.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-12bpf: fix overflow check in adjust_jmp_off()Shung-Hsi Yu
adjust_jmp_off() incorrectly used the insn->imm field for all overflow check, which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case, not the general jump instruction case. Fix it by using insn->off for overflow check in the general case. Fixes: 5337ac4c9b80 ("bpf: Fix the corner case with may_goto and jump to the 1st insn.") Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20240712080127.136608-2-shung-hsi.yu@suse.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-07-12Merge branch 'iommu/nvidia/tegra' into iommu/nextWill Deacon
* iommu/nvidia/tegra: iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
2024-07-12Merge branch 'iommu/intel/vt-d' into iommu/nextWill Deacon
* iommu/intel/vt-d: iommu/vt-d: Fix identity map bounds in si_domain_init() iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address() iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH iommu/vt-d: Refactor PCI PRI enabling/disabling callbacks iommu/vt-d: Add helper to flush caches for context change iommu/vt-d: Add helper to allocate paging domain iommu/vt-d: Downgrade warning for pre-enabled IR iommu/vt-d: Remove control over Execute-Requested requests iommu/vt-d: Remove comment for def_domain_type iommu/vt-d: Handle volatile descriptor status read iommu/vt-d: Use try_cmpxchg64() in intel_pasid_get_entry()
2024-07-12riscv: hwprobe: export Zawrs ISA extensionAndrew Jones
Export Zawrs ISA extension through hwprobe. [Palmer: there's a gap in the numbers here as there will be a merge conflict when this is picked up. To avoid confusion I just set the hwprobe ID to match what it would be post-merge.] Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20240426100820.14762-12-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-12Merge branch 'iommu/arm/smmu' into iommu/nextWill Deacon
* iommu/arm/smmu: (32 commits) iommu: Move IOMMU_DIRTY_NO_CLEAR define iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping iommu/arm-smmu-v3: Add support for dirty tracking in domain alloc iommu/io-pgtable-arm: Add read_and_clear_dirty() support iommu/arm-smmu-v3: Add feature detection for HTTU iommu/arm-smmu-v3: Add support for domain_alloc_user fn iommu/arm-smmu-qcom: record reason for deferring probe iommu/arm-smmu: Pretty-print context fault related regs iommu/arm-smmu-qcom-debug: Do not print for handled faults iommu/arm-smmu: Add CB prefix to register bitfields dt-bindings: arm-smmu: Add X1E80100 GPU SMMU iommu/arm-smmu-v3: add missing MODULE_DESCRIPTION() macro iommu/arm-smmu-v3: Shrink the strtab l1_desc array iommu/arm-smmu-v3: Do not zero the strtab twice iommu/arm-smmu-v3: Allow setting a S1 domain to a PASID iommu/arm-smmu-v3: Allow a PASID to be set when RID is IDENTITY/BLOCKED iommu/arm-smmu-v3: Test the STE S1DSS functionality iommu/arm-smmu-v3: Allow IDENTITY/BLOCKED to be set while PASID is used iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain ...
2024-07-12Merge branch 'iommu/amd/amd-vi' into iommu/nextWill Deacon
* iommu/amd/amd-vi: iommu/amd: Use try_cmpxchg64() in v2_alloc_pte()
2024-07-12Merge branch 'iommu/allwinner/sun50i' into iommu/nextWill Deacon
* iommu/allwinner/sun50i: iommu: sun50i: Add H616 compatible string dt-bindings: iommu: add new compatible strings iommu: sun50i: allocate page tables from below 4 GiB iommu: sun50i: clear bypass register
2024-07-12drm/amdgpu/mes12: add missing opcode stringAlex Deucher
Fixes the indexing of the string array. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-12drm/amdgpu/mes11: update opcode stringsAlex Deucher
Add new packet. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-12Revert "drm/amd/display: Reset freesync config before update new state"Leo Li
This change caused PSR SU panels to not read from their remote fb, preventing us from entering self-refresh. It is a regression. This reverts commit eb6dfbb7a9c67c7d9bcdb9f9b9131270e2144e3d. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit dc1000bf463d1d89f66d6b5369cf76603f32c4d3)
generated by cgit (git 2.34.1) at 2025-09-14 23:46:55 +0000