summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-12brcmsmac: fix reading of PCI sprom contentsLinus Torvalds
It appears that you can only read the sprom contents with aligned 16-bit reads: anything else causes at least some versions of the broadcom chipset to abort the PCI transaction, returning 0xff. This apparently doesn't trigger very often, because most setups don't use an external srom chip, and the OTP sprom loading doesn't have this issue. But at least the current 11" Macbook Air does trigger it, and wireless communications were broken as a result. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12mmc: fix a deadlock between system suspend and MMC block IOGuennadi Liakhovetski
Performing MMC block IO with simultaneous STR can lead to a deadlock: the mmc_pm_notify() function claims the host and then calls bus .remove() method, which lands in mmc_blk_remove(), which calls mmc_blk_remove_req() then it goes to -> mmc_cleanup_queue() -> kthread_stop(), which waits for the mmc-block thread to stop. If the mmc-block thread at that time is processing block requests, it will also try to claim the host in mmc_blk_issue_rq() and block there. This patch fixes the problem by calling .remove() before claiming the host. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: restore the enabled dma when do reset allShaohui Xie
If dma is enabled, it'll be cleared when reset all is performed, this can be observed on some platforms, such as P2041 which has a version 2.3 controller, but platform like P4080 which has a version 2.2 controller, does not suffer this, so we will check if the dma is enabled, we should restore it after reset all. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operationJaehoon Chung
In FIFOTH register, the RX_WMark field (bits[27:16]) defaults to FIFO_DEPTH - 1. When reading it, bits[26:16] were being used, so fix it to use the mask 0xfff instead of 0x7ff. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: host: Adds support for eMMC 4.5 HS200 modeGirish K S
This patch adds support for the HS200 mode on the host side. Also enables the tuning feature required when the HS200 mode is selected. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: core: HS200 mode support for eMMC 4.5Girish K S
This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()Jaehoon Chung
In status register, fifo_count is bit[29:17]. (0x1FFF is correct) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: core: Separate the timeout value for cache-ctrlSeungwon Jeon
Turning the cache off implies flushing cache which doesn't define maximum timeout unlike cache-on. This patch will apply the generic CMD6 timeout only for cache-on. Additionally the kernel message is added for checking failure case of cache-on. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-spear: Fix compilation errorViresh Kumar
With the inclusion of following patch (59b5bc3929b37): "mmc: sdhci: remove "state" argument from sdhci_suspend_host" we get a compilation error for sdhci-spear: drivers/mmc/host/sdhci-spear.c:283:2: error: too many arguments to function ‘sdhci_suspend_host’ This patch fixes this error. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: Deal with failure case in sdhci_suspend_hostAaron Lu
If there are errors happened in sdhci_suspend_host, handle it so that when the function returns with an error, the host's behaviour is the same before this function call, e.g. card detection is enabled and tuning timer is active, etc. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Clear the DDR mode for non-DDRSeungwon Jeon
UHS_REG should be cleared for non-DDR mode. But currently there is no way to clear DDR mode, if it is already set once. This patch adds clearing DDR mode for non-DDR mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sd: Fix SDR12 timing regressionAlexander Elbs
This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu
When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-12ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.Javier Martin
"snd_imx_pcm_hw_params" callback can be called several times by the user (i.e. OSS emulation) leading to a DMA channel leak. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-12MAINTAINERS: List i2c-omap and i2c-davinci driversJean Delvare
This will ensure that the right people and lists are notified when these drivers are modified. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2012-01-12MAINTAINERS: i2c: Add third maintainerWolfram Sang
Add me as a third maintainer to help out in the i2c subsystem. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org>
2012-01-12i2c/gpio-i2cmux: Convert to use module_platform_driver()Axel Lin
Convert gpio-i2cmux to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12i2c/busses: Use module_platform_driver()Axel Lin
Convert the drivers in drivers/i2c/busses/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12i2c-dev: Use memdup_userThomas Meyer
Use memdup_user rather than duplicating its implementation. This is a little bit restricted to reduce false positives. The semantic patch that makes this output is available in scripts/coccinelle/api/memdup_user.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12i2c: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Use DEFINE_PCI_DEVICE_TABLE ensures we make the pci_device_id table const and marked as __devinitconst. This also fixes some warnings from checkpatch: e.g. WARNING: Use DEFINE_PCI_DEVICE_TABLE for struct pci_device_id #1096: FILE: i2c/busses/i2c-intel-mid.c:1096: +static struct pci_device_id intel_mid_i2c_ids[] = { Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Olof Johansson <olof@lixom.net> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Acked-by: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12i2c-ali1535: enable SPARC supportcorentin.labbe
The i2c-ali1535 driver doesn't work on SPARC, because it assumes that ioport address are 16-bit wide (address stored in an unsigned short). But on SPARC arch, ioports are mapped in memory and so must be stored in an unsigned long. Use pci_resource_start for getting IOMEM base address, then read the SMBBA of the i2c bus and use these together for I/O access. I would like to thank Jean DELVARE for reviewing my patch. Signed-off-by: LABBE Corentin <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12i2c: Fix error value returned by several bus driversJean Delvare
When adding checks for ACPI resource conflicts to many bus drivers, not enough attention was paid to the error paths, and for several drivers this causes 0 to be returned on error in some cases. Fix this by properly returning a non-zero value on every error. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2012-01-12ceph: ensure prealloc_blob is in place when removing xattrAlex Elder
In __ceph_build_xattrs_blob(), if a ceph inode's extended attributes are marked dirty, all attributes recorded in its rb_tree index are formatted into a "blob" buffer. The target buffer is recorded in ceph_inode->i_xattrs.prealloc_blob, and it is expected to exist and be of sufficient size to hold the attributes. The extended attributes are marked dirty in two cases: when a new attribute is added to the inode; or when one is removed. In the former case work is done to ensure the prealloc_blob buffer is properly set up, but in the latter it is not. Change the logic in ceph_removexattr() so it matches what is done in ceph_setxattr(). Note that this is done in a way that keeps the two blocks of code nearly identical, in anticipation of a subsequent patch that encapsulates some of this logic into one or more helper routines. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12rbd: initialize snap_rwsem in rbd_add()Alex Elder
New rbd device structures get initialized in rbd_add(). Many of the fields rely on being initially zero-filled. However we lockdep was noticing that the rw_semaphore embedded in the header field was not getting properly initialized. Fix that. Signed-off-by: Alex Elder <elder@dreamhost.com> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12ceph: enable/disable dentry complete flags via mount optionSage Weil
Enable/disable use of the dentry dir 'complete' flag via a mount option. This lets the admin control whether ceph uses the dcache to satisfy negative lookups or readdir when it has the entire directory contents in its cache. This is purely a performance optimization; correctness is guaranteed whether it is enabled or not. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12vfs: export symbol d_find_any_alias()Sage Weil
Ceph needs this. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12x86: Get rid of 'dubious one-bit signed bitfield' sprase warningAnton Vorontsov
This very noisy sparse warning appears on almost every file in the kernel: CHECK init/main.c arch/x86/include/asm/thread_info.h:43:55: error: dubious one-bit signed bitfield arch/x86/include/asm/thread_info.h:44:46: error: dubious one-bit signed bitfield This patch changes sig_on_uaccess_error and uaccess_err flags to unsigned type and thus fixes the warning. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12xen/balloon: Move the registration from device to subsystem.Konrad Rzeszutek Wilk
With git commit 070680218379e15c1901f4bf21b98e3cbf12b527 "xen-balloon: convert sysdev_class to a regular subsystem" we would end up with the attributes being put in: /sys/devices/xen_memory0/target_kb instead of /sys/devices/system/xen_memory/xen_memory0/target_kb Making the tools inable to deflate the kernel to make more space for launching another guest and printing: Error: Failed to query current memory allocation of dom0 Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Suggested-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-12Merge commit '070680218379e15c1901f4bf21b98e3cbf12b527' into ↵Konrad Rzeszutek Wilk
stable/for-linus-fixes-3.3 * commit '070680218379e15c1901f4bf21b98e3cbf12b527': (50 commits) xen-balloon: convert sysdev_class to a regular subsystem clocksource: convert sysdev_class to a regular subsystem ibm_rtl: convert sysdev_class to a regular subsystem edac: convert sysdev_class to a regular subsystem rtmutex-tester: convert sysdev_class to a regular subsystem driver-core: implement 'sysdev' functionality for regular devices and buses kref: fix up the kfree build problems kref: Remove the memory barriers kref: Implement kref_put in terms of kref_sub kref: Inline all functions Drivers: hv: Get rid of an unnecessary check in hv.c Drivers: hv: Make the vmbus driver unloadable Drivers: hv: Fix a memory leak Documentation: Update stable address MAINTAINERS: stable: Update address w1: add fast search for single slave bus driver-core: skip uevent generation when nobody is listening drivers: hv: Don't OOPS when you cannot init vmbus firmware: google: fix gsmi.c build warning drivers_base: make argument to platform_device_register_full const ...
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-12x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=yBjorn Helgaas
We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12Merge branch 'topic/hda' into for-linusTakashi Iwai
2012-01-12Merge branch 'topic/misc' into for-linusTakashi Iwai
2012-01-12Merge branch 'for-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc
2012-01-12blockdev: convert some macros to static inlinesStephen Rothwell
We prefer to program in C rather than preprocessor and it fixes this warning when CONFIG_BLK_DEV_INTEGRITY is not set: drivers/md/dm-table.c: In function 'dm_table_set_integrity': drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-12fs: remove unneeded plug in mpage_readpages()Namjae Jeon
The block plug in mpage_readpages() duplicates the one in read_pages(). Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-11Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SH/R-Mobile updates for 3.3 merge window. * tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: (32 commits) arm: mach-shmobile: add a resource name for shdma ARM: mach-shmobile: r8a7779 SMP support V3 ARM: mach-shmobile: Add kota2 defconfig. ARM: mach-shmobile: Add marzen defconfig. ARM: mach-shmobile: r8a7779 power domain support V2 ARM: mach-shmobile: Fix up marzen build for recent GIC changes. ARM: mach-shmobile: r8a7779 PFC function support ARM: mach-shmobile: Flush caches in platform_cpu_die() ARM: mach-shmobile: Allow SoC specific CPU kill code ARM: mach-shmobile: Fix headsmp.S code to use CPUINIT ARM: mach-shmobile: clock-r8a7779: clkz/clkzs support ARM: mach-shmobile: clock-r8a7779: add DIV4 clock support ARM: mach-shmobile: Marzen LAN89218 support ARM: mach-shmobile: Marzen SCIF2/SCIF4 support ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2 ARM: mach-shmobile: r8a7779 and Marzen base support V2 sh: pfc: Unlock register support sh: pfc: Variable bitfield width config register support sh: pfc: Add config_reg_helper() function sh: pfc: Convert index to field and value pair ...
2012-01-11Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SuperH updates for 3.3 merge window. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits) sh: magicpanelr2: Update for parse_mtd_partitions() fallout. sh: mach-rsk: Update for parse_mtd_partitions() fallout. sh: sh2a: Improve cache flush/invalidate functions sh: also without PM_RUNTIME pm_runtime.o must be built sh: add a resource name for shdma sh: Remove redundant try_to_freeze() invocations. sh: Ensure IRQs are enabled across do_notify_resume(). sh: Fix up store queue code for subsys_interface changes. sh: clkfwk: sh_clk_init_parent() should be called after clk_register() sh: add platform_device for renesas_usbhs in board-sh7757lcr sh: modify clock-sh7757 for renesas_usbhs sh: pfc: ioremap() support sh: use ioread32/iowrite32 and mapped_reg for div6 sh: use ioread32/iowrite32 and mapped_reg for div4 sh: use ioread32/iowrite32 and mapped_reg for mstp32 sh: extend clock struct with mapped_reg member sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT() sh: clkfwk: clock-sh7724: all div6_clks use SH_CLK_DIV6_EXT() sh: clock-sh7723: add CLKDEV_ICK_ID for cleanup serial: sh-sci: Handle GPIO function requests. ...
2012-01-11Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix lockup by limiting load-balance retries on lock-break sched: Fix CONFIG_CGROUP_SCHED dependency sched: Remove empty #ifdefs
2012-01-12lguest: Make sure interrupt is allocated ok by lguest_setup_irqStratos Psomadakis
Make sure the interrupt is allocated correctly by lguest_setup_irq (check the return value of irq_alloc_desc_at for -ENOMEM) Signed-off-by: Stratos Psomadakis <psomas@cslab.ece.ntua.gr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleanups and commentry)
2012-01-12lguest: move the lguest tool to the tools directoryDavidlohr Bueso
This is a better location instead of having it in Documentation. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (fixed compile)
2012-01-12lguest: switch segment-voodoo-numbers to readable symbolsJacek Galowicz
When studying lguest's x86 segment descriptor code, it is not longer necessary to have the Intel x86 architecture manual open on the page with the segment descriptor illustration to understand the crazy numbers assigned to both descriptor structure halves a/b. Now the struct desc_struct's fields, like suggested by Glauber de Oliveira Costa in 2008, are used. Signed-off-by: Jacek Galowicz <jacek@galowicz.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: balloon: Add freeze, restore handlers to support S4Amit Shah
Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: balloon: Move vq initialization into separate functionAmit Shah
The probe and PM restore functions will share this code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: net: Add freeze, restore handlers to support S4Amit Shah
Remove all the vqs, disable napi and detach from the netdev on hibernation. Re-create vqs after restoring from a hibernated image, re-enable napi and re-attach the netdev. This keeps networking working across hibernation. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: net: Move vq and vq buf removal into separate functionAmit Shah
The remove and PM freeze functions will share this code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: net: Move vq initialization into separate functionAmit Shah
The probe and PM restore functions will share this code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: blk: Add freeze, restore handlers to support S4Amit Shah
Delete the vq and flush any pending requests from the block queue on the freeze callback to prepare for hibernation. Re-create the vq in the restore callback to resume normal function. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: blk: Move vq initialization to separate functionAmit Shah
The probe and PM restore functions will share this code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit (git 2.34.1) at 2025-09-13 08:12:44 +0000