| Age | Commit message (Collapse) | Author |
|---|
|
During suspend, the device will be moved to FULLSLEEP state.
As btcoex is never been stopped, the btcoex timer is running
and tries to access hw on fullsleep state. Fix that.
Cc: stable@vger.kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This return holds the number of bytes transfered (1 byte) or a negative
error code. The type should be int instead of u8.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Do not leak memory by updating pointer with potentially NULL realloc return value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
commit b74713d04effbacd3d126ce94cec18742187b6ce
"ath9k: Handle fatal interrupts properly" introduced a race condition, where
IRQs are being left enabled, however the irq handler returns IRQ_HANDLED
while the reset is still queued without addressing the IRQ cause.
This leads to an IRQ storm that prevents the system from even getting to
the reset code.
Fix this by disabling IRQs in the handler without touching intr_ref_cnt.
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The usb message must be saved also in case the USB endpoint is not a
control endpoint (i.e., "endpoint 0"), otherwise in some circumstances
we don't have a payload in case of error.
The patch has been created by tracing with usbmon the different error
messages generated by this driver with respect to the ehci-hcd driver.
Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Tested-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit 354ab8567ae3107a8cbe7228c3181990ba598aac titled
"Fix OMAP EHCI suspend/resume failure (i693)" is causing
the usb hub and device detection fails in beagle XM
causeing NFS not functional. This affects the core retention too.
The same commit logic needs to be revisted adhering to hwmod and
device tree framework.
for now, this commit id 354ab8567ae3107a8cbe7228c3181990ba598aac
titled "Fix OMAP EHCI suspend/resume failure (i693)" reverted.
This patch is validated on BeagleXM with NFS support over
usb ethernet and USB mass storage and other device detection.
Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
built as module
Since commit "5e0aa49 usb: chipidea: use generic map/unmap routines",
the udc part of the chipidea driver needs the generic usb gadget helper
functions. If the chipidea driver with udc support is built into the
kernel and usb gadget is built a module, the linking of the kernel
fails with:
drivers/built-in.o: In function `_hardware_dequeue':
drivers/usb/chipidea/udc.c:527:
undefined reference to `usb_gadget_unmap_request'
drivers/usb/chipidea/udc.c:1269:
undefined reference to `usb_gadget_unmap_request'
drivers/usb/chipidea/udc.c:1821:
undefined reference to `usb_del_gadget_udc'
drivers/usb/chipidea/udc.c:443:
undefined reference to `usb_gadget_map_request'
drivers/usb/chipidea/udc.c:1774:
undefined reference to `usb_add_gadget_udc'
This patch changes the dependencies, so that udc support can only be
activated if the linux gadget support (USB_GADGET) is builtin or both
chipidea driver and USB_GADGET are modular. Same dependencies for the
chipidea host support and the linux host side USB support (USB).
While there, fix the indention of chipidea the help text.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In this patch, we add new declarations into option.c to support the new
interfaces of Huawei Data Card devices. And at the same time, remove the
redundant declarations from option.c.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
|
|
This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter
interface:
http://www.kondo-robot.com/EN/wp/?cat=28
Tested by controlling an RCB3 board using libRCB3.
Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
|
|
Fixes the following build error:
In file included from arch/arm/mach-exynos/include/mach/dma.h:24:0,
from arch/arm/plat-samsung/include/plat/dma-ops.h:17,
from arch/arm/plat-samsung/include/plat/dma.h:128,
from sound/soc/samsung/pcm.c:23:
arch/arm/plat-samsung/include/plat/dma-pl330.h:106:8:
error: redefinition of ‘struct s3c2410_dma_client’
arch/arm/plat-samsung/include/plat/dma.h:40:8: note: originally defined here
make[3]: *** [sound/soc/samsung/pcm.o] Error 1
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Introducing following bits to the the perf_event_attr struct:
- exclude_callchain_kernel to filter out kernel callchain
from the sample dump
- exclude_callchain_user to filter out user callchain
from the sample dump
We need to be able to disable standard user callchain dump when we use
the dwarf cfi callchain mode, because frame pointer based user
callchains are useless in this mode.
Implementing also exclude_callchain_kernel to have complete set of
options.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ Added kernel callchains filtering ]
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-7-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.
Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.
Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples. This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introducing perf_output_skip function to be able to skip data within the
perf ring buffer.
When writing data into perf ring buffer we first reserve needed place in
ring buffer and then copy the actual data.
There's a possibility we won't be able to fill all the reserved size
with data, so we need a way to skip the remaining bytes.
This is going to be useful when storing the user stack dump, where we
might end up with less data than we originally requested.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding a generic way to use __output_copy function with specific copy
function via DEFINE_PERF_OUTPUT_COPY macro.
Using this to add new __output_copy_user function, that provides output
copy from user pointers. For x86 the copy_from_user_nmi function is used
and __copy_from_user_inatomic for the rest of the architectures.
This new function will be used in user stack dump on sample, coming in
next patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-4-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix the wrong logic: we should use || instead of &&
Cc: Leo Yan <leoy@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Yuanhan Liu <yliu.null@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
|
|
Introducing PERF_SAMPLE_REGS_USER sample type bit to trigger the dump of
user level registers on sample. Registers we want to dump are specified
by sample_regs_user bitmask.
Only user level registers are dumped at the moment. Meaning the register
values of the user space context as it was before the user entered the
kernel for whatever reason (syscall, irq, exception, or a PMI happening
in userspace).
The layout of the sample_regs_user bitmap is described in
asm/perf_regs.h for archs that support register dump.
This is going to be useful to bring Dwarf CFI based stack unwinding on
top of samples.
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Dump registers ABI specification. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This brings a new API to help the selective dump of registers on event
sampling, and its implementation for x86 arch.
Added HAVE_PERF_REGS config option to determine if the architecture
provides perf registers ABI.
The information about desired registers will be passed in u64 mask.
It's up to the architecture to map the registers into the mask bits.
For the x86 arch implementation, both 32 and 64 bit registers bits are
defined within single enum to ensure 64 bit system can provide register
dump for compat task if needed in the future.
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Added missing linux/errno.h include ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the missing usb controller version info and port0, which is
required during setup usb phy.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
According to a compiler warning, the tpm_tis_resume() function is not
used for CONFIG_PM_SLEEP unset, so add a #ifdef to prevent it from
being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
According to compiler warnings, quite some suspend/resume functions
in platform x86 drivers are not used for CONFIG_PM_SLEEP unset, so
add #ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
The return value of snd_hda_param_read() is -1 for an error, otherwise
it's the supported power states of a codec.
The supported power states is a 32-bit value. Bit 31 will be set to 1
if the codec supports EPSS, thus making "sup" negative. And the bit
28:5 is reserved as "0".
So a negative value other than -1 shall be further checked.
Please refer to High-Definition spec 7.3.4.12 "Supported Power
States", thanks!
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When "Beep Playback Switch" had a different value on left and right
channels (such as muting left but not right, or vice versa), this
could result in the right channel being ignored.
This patch enables beep to be sounding from right channel only, and
also give correct result back to userspace (e g amixer).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to
be populated with at least one member. gcc correctly warns about
the out-of-bounds access here.
Since this can not possibly work, it's better to disable i2c
support entirely on this board.
Without this patch, building davinci_all_defconfig results in:
arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init':
arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Andrey Porodko <panda@chelcom.ru>
|
|
Disabling CONFIG_BUG creates an insane amount of build warnings, which
makes it useless to check for building defconfigs to see if new
warnings show up.
Without this patch, building tct_hammer_defconfig results in:
net/packet/af_packet.c: In function 'tpacket_rcv':
net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized]
net/core/ethtool.c: In function 'ethtool_get_feature_mask':
net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type]
block/cfq-iosched.c: In function 'cfq_async_queue_prio':
block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type]
mm/bootmem.c: In function 'mark_bootmem':
mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type]
net/core/dev.c: In function 'skb_warn_bad_offload':
net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable]
drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup':
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here
include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
(and many more)
The size of vmlinux increases by 1.78% because of this:
size obj-arm/vmlinux.nobug
text data bss dec hex filename
2108474 116916 55352 2280742 22cd26 obj-arm/vmlinux
size obj-arm/vmlinux.bug
text data bss dec hex filename
2150804 116916 53696 2321416 236c08 obj-arm/vmlinux
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
|
|
The original code was misported from the X driver,
a) an int went to unsigned int, breaking the downward counting testm code
b) the port did the vco/computed clock bits completely wrong.
This fixes an infinite loop on modprobe on some Dell servers with the G200ER
chipset variant.
Found in internal testing.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Do not leak memory by updating pointer with potentially
NULL realloc return value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These patches all fix bugs that were newly introduced in v3.6-rc1
and found because they cause a gcc warning with one of the ARM
defconfigs. Most of them are harmless, but since we're trying
to get rid of all warnings eventually, we can start with the ones
that were not there before.
* testing/new-warnings:
omap-rng: fix use of SIMPLE_DEV_PM_OPS
spi/s3c64xx: improve error handling
mtd/omap2: fix dmaengine_slave_config error handling
gpio: em: do not discard em_gio_irq_domain_cleanup
ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
usb/ohci-omap: remove unused variable
mfd/asic3: fix asic3_mfd_probe return value
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
omap_rng_suspend and omap_rng_resume are unused if CONFIG_PM is enabled
but CONFIG_PM_SLEEP is disabled. I found this while building all defconfig
files on ARM. It's not clear to me if this is the right solution, but
at least it makes the code consistent again.
Without this patch, building omap1_defconfig results in:
drivers/char/hw_random/omap-rng.c:165:12: warning: 'omap_rng_suspend' defined but not used [-Wunused-function]
drivers/char/hw_random/omap-rng.c:171:12: warning: 'omap_rng_resume' defined but not used [-Wunused-function]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kevin Hilman <khilman@ti.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a device tree definition os an s3c64xx SPI master is missing
a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata
function might use uninitialized memory in place of that node,
which was correctly reported by gcc.
Without this patch, building s3c6400_defconfig results in:
drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25':
drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
|
|
The newly added dmaengine support in the omap2 nand driver
potentially causes an undefined return value from the
omap_nand_probe function when dmaengine_slave_config
reports an error. Let's handle this by returning the
same error back to the caller.
Without this patch, building omap2plus_defconfig results in:
drivers/mtd/nand/omap2.c: In function 'omap_nand_probe':
drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Grazvydas Ignotas <notasas@gmail.com>
|
|
The newly added gpio-em driver marks its em_gio_irq_domain_cleanup
function as __devexit, which would lead to that function being
discarded in case CONFIG_HOTPLUG is disabled. However, the function
is also called by the error handling logic em_gio_probe, which
would cause a jump into a NULL pointer if it was removed from the
kernel or module.
Without this patch, building kzm9d_defconfig results in:
WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup()
The function __devinit em_gio_probe() references
a function __devexit em_gio_irq_domain_cleanup().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
em_gio_irq_domain_cleanup() so it may be used outside an exit section.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
|
|
exynos_pm_add_dev_to_genpd is used if one or more out of a large
number of Kconfig symbols are enabled. However the new
exynos_defconfig selects none of those, so the function becomes
unused. Marking it so lets the compiler automatically discard
it.
Without this patch, building exynos_defconfig results in:
arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
|
|
This function returns its own error codes instead of normal negative
error codes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
The higher ptrace restriction levels should be blocking even
PTRACE_TRACEME requests. The comments in the LSM documentation are
misleading about when the checks happen (the parent does not go through
security_ptrace_access_check() on a PTRACE_TRACEME call).
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 3.5.x and later
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Via-headers are parsed beginning at the first character after the Via-address.
When the address is translated first and its length decreases, the offset to
start parsing at is incorrect and header parameters might be missed.
Update the offset after translating the Via-address to fix this.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Within SIP messages IPv6 addresses are enclosed in square brackets in most
cases, with the exception of the "received=" header parameter. Currently
the helper fails to parse enclosed addresses.
This patch:
- changes the SIP address parsing function to enforce square brackets
when required, and accept them when not required but present, as
recommended by RFC 5118.
- adds a new SDP address parsing function that never accepts square
brackets since SDP doesn't use them.
With these changes, the SIP helper correctly parses all test messages
from RFC 5118 (Session Initiation Protocol (SIP) Torture Test Messages
for Internet Protocol Version 6 (IPv6)).
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit 3a8fc53a (netfilter: nf_ct_helper: allocate 16 bytes for the helper
and policy names) introduced a bug in the SIP helper, the helper name is
sprinted to the sip_names array instead of instead of into the helper
structure. This breaks the helper match and the /proc/net/nf_conntrack_expect
output.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The check in the for-loop is broken. Fix it and the
boot-crash it causes in AMD IOMMUv2 systems.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2,
but the only remapping unit described in the DMAR table matches id 0.
Interrupt remapping fails as a result, and the kernel panics with the
message "timer doesn't work through Interrupt-remapped IO-APIC."
To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is
not found, do not allow IRQ remapping to be enabled.
v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR,
and add FW_BUG to the log message
v3: Skip check if IOMMU doesn't support interrupt remapping and remove
existing check that the IOMMU count equals the IOAPIC count
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
commit 5d299f3d3c8a2fb (net: ipv6: fix TCP early demux) added a
regression for ipv6_mapped case.
[ 67.422369] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 67.449678] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[ 92.631060] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 92.631435] IP: [< (null)>] (null)
[ 92.631645] PGD 0
[ 92.631846] Oops: 0010 [#1] SMP
[ 92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror
dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp
parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event
snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore
snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd
uhci_hcd
[ 92.634294] CPU 0
[ 92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3
[ 92.634294] RIP: 0010:[<0000000000000000>] [< (null)>]
(null)
[ 92.634294] RSP: 0018:ffff880245fc7cb0 EFLAGS: 00010282
[ 92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX:
0000000000000000
[ 92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI:
ffff88024827ad00
[ 92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09:
0000000000000000
[ 92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12:
ffff880254735380
[ 92.634294] R13: ffff880254735380 R14: 0000000000000000 R15:
7fffffffffff0218
[ 92.634294] FS: 00007f4516ccd6f0(0000) GS:ffff880256600000(0000)
knlGS:0000000000000000
[ 92.634294] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4:
00000000000007f0
[ 92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000,
task ffff880254b8cac0)
[ 92.634294] Stack:
[ 92.634294] ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8
ffff880245fc7d68
[ 92.634294] ffffffff81385083 00000000001d2680 ffff8802547353a8
ffff880245fc7d18
[ 92.634294] ffffffff8105903a ffff88024827ad60 0000000000000002
00000000000000ff
[ 92.634294] Call Trace:
[ 92.634294] [<ffffffff813837a7>] ? tcp_finish_connect+0x2c/0xfa
[ 92.634294] [<ffffffff81385083>] tcp_rcv_state_process+0x2b6/0x9c6
[ 92.634294] [<ffffffff8105903a>] ? sched_clock_cpu+0xc3/0xd1
[ 92.634294] [<ffffffff81059073>] ? local_clock+0x2b/0x3c
[ 92.634294] [<ffffffff8138caf3>] tcp_v4_do_rcv+0x63a/0x670
[ 92.634294] [<ffffffff8133278e>] release_sock+0x128/0x1bd
[ 92.634294] [<ffffffff8139f060>] __inet_stream_connect+0x1b1/0x352
[ 92.634294] [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[ 92.634294] [<ffffffff8104b333>] ? wake_up_bit+0x25/0x25
[ 92.634294] [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[ 92.634294] [<ffffffff8139f223>] ? inet_stream_connect+0x22/0x4b
[ 92.634294] [<ffffffff8139f234>] inet_stream_connect+0x33/0x4b
[ 92.634294] [<ffffffff8132e8cf>] sys_connect+0x78/0x9e
[ 92.634294] [<ffffffff813fd407>] ? sysret_check+0x1b/0x56
[ 92.634294] [<ffffffff81088503>] ? __audit_syscall_entry+0x195/0x1c8
[ 92.634294] [<ffffffff811cc26e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 92.634294] [<ffffffff813fd3e2>] system_call_fastpath+0x16/0x1b
[ 92.634294] Code: Bad RIP value.
[ 92.634294] RIP [< (null)>] (null)
[ 92.634294] RSP <ffff880245fc7cb0>
[ 92.634294] CR2: 0000000000000000
[ 92.648982] ---[ end trace 24e2bed94314c8d9 ]---
[ 92.649146] Kernel panic - not syncing: Fatal exception in interrupt
Fix this using inet_sk_rx_dst_set(), and export this function in case
IPv6 is modular.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit be9f4a44e7d41cee (ipv4: tcp: remove per net tcp_sock) added a
selinux regression, reported and bisected by John Stultz
selinux_ip_postroute_compat() expect to find a valid sk->sk_security
pointer, but this field is NULL for unicast_sock
It turns out that unicast_sock are really temporary stuff to be able
to reuse part of IP stack (ip_append_data()/ip_push_pending_frames())
Fact is that frames sent by ip_send_unicast_reply() should be orphaned
to not fool LSM.
Note IPv6 never had this problem, as tcp_v6_send_response() doesnt use a
fake socket at all. I'll probably implement tcp_v4_send_response() to
remove these unicast_sock in linux-3.7
Reported-by: John Stultz <johnstul@us.ibm.com>
Bisected-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During probe, every function probed clears the recovery registers from
all functions on its path - thus signaling that given a future recovery
event, there will be no need to wait for those functions.
This is a flawed behaviour - each function should only be responsible
for its own bit.
Since this registers are handled during the load/unload routines,
this cleanup is removed altogether.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing previous driver unload flow is flawed, causing the probe of
functions reaching the 'uncommon fork' in flr-capable devices to fail.
This patch resolves this, as well as fixing the flow for hypervisors which
disable flr capabilities from functions as they pass them as PDA to VMs,
as we cannot base the flow on the pci configuration space.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a fix for bug, introduced in 3.4 kernel by commit
1ab5ecb90cb6a3df1476e052f76a6e8f6511cb3d ("tun: don't hold network
namespace by tun sockets"), which, among other things, replaced simple
sock_put() by sk_release_kernel(). Below is sequence, which leads to
oops for non-persistent devices:
tun_chr_close()
tun_detach() <== tun->socket.file = NULL
tun_free_netdev()
sk_release_sock()
sock_release(sock->file == NULL)
iput(SOCK_INODE(sock)) <== dereference on NULL pointer
This patch just removes zeroing of socket's file from __tun_detach().
sock_release() will do this.
Cc: stable@vger.kernel.org
Reported-by: Ruan Zhijie <ruanzhijie@hotmail.com>
Tested-by: Ruan Zhijie <ruanzhijie@hotmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
